Beruflich Dokumente
Kultur Dokumente
Safety
Third-generation
Safety Construction
800.262.4332
www.IDEC.com/switches
Selector Switches - Page 10 Selector Switches - Page 10 Key Selector Switches - Page 13
• Knob Operator 2- and 3-position • Lever Operator 2- and 3-position • 7 different wave-keys available
• Lever operator with an easy grip • Hard to duplicate, wave-key ensures
a high level of safety
3
ø22mm Flush Mount CW Switches & Pilot Devices
Flush bezel projects only 2.5mm from front of panel and
as little as 39.9mm behind the panel!
• ø22.3mm mounting hole compliant with IEC 60947-5-1
• 3.5mm operator travel for pushbuttons ensures comfortable and reliable
operation
• Up to 6 contacts per switch are possible with use of dual contact blocks
• Black and metallic bezels available
• Illuminated pushbuttons, pushbuttons, pilot lights, selector switches and key
selector switches are available
• Direct opening NC contact
• Seven different keys can be chosen for key selector switches
• 10A contact rating; up to three contact blocks for non-illuminated and two
contact blocks for illuminated models can be connected
• Contact blocks can be removed by using the locking lever
• IP20 finger-safe screw terminals
• UL Type 4X rating
Applicable Standards Mark File No. or Organization
UL508
UL/c-UL File No. E68961
CSA C22.2 No.14
4
LED Module
Rated Insulation Voltage (Ui) 250V
Rated Operating Voltage (Ue) 6V AC/DC 12V AC/DC 24V AC/DC 100/120V AC 230/240V AC
Operating Voltage Range 6V AC/DC±10% 12V AC/DC±10% 24V AC/DC±10% 100/120V AC±10% 230/240V AC +/-10%
Illumination Color Code k A (amber), G (green), PW (white), R (red), S (blue)
LED Module Part Number CW-EAQ2k CW-EAQ3k CW-EAQ4k CW-EAQHk CW-EAQM4k
Current Draw 15 mA 15 mA 16.5 mA 18 mA 18 mA
Life (reference value) Approx. 30,000 hours
R
R X1
X1 LED Chip
LED Chip
Rectifying Diode
Internal Circuit Rectifying Diode R Zener Diode
R R
Zener Diode Resistor
X2
X2 Resistor Capacitor
C
Contact Blocks
Contact Block Single Contact Block Double Contact Block
Contact 1NO 1NC 2NO 2NC 1NO-1NC
Part No. YW-E10R YW-E01 YW-EW2R0 YW-EW02 YW-EW1R1
Shape
Housing Color Blue/Black Reddish Purple Blue/Black Reddish Purple Reddish Purple/Blue
Push Rod Color Black Red Black Red Gray
1st tier: 13-14 1st tier: 11-12 1st tier: (NO) 13-14
Terminal No. 3-4 1-2
2nd tier: 23-24 2nd tier: 21-22 2nd tier: (NC) 21-22
Weight (approx.) 11g 19g
30
800.262.4332
www.IDEC.com/switches
5
Illuminated Pushbuttons
6
Illuminated Pushbuttons
+ + + + =
CW-EAQ kj
Round
CW9Z-L12j
extended
1. In place of j, specify the Lens/LED Color Code from table. 1. In place of j, specify the Lens/LED Color Code from table.
2. In place of k, specify the Voltage Code from table.
800.262.4332
www.IDEC.com/switches
7
Non-illuminated Pushbuttons
+ + =
1NO YW-E10R
Round
flush
CW1B-M1j CW4B-M1j
Momentary
Single
1NC YW-E01 CW-CN
extended
Round
CW1B-A1j CW4B-A1j
Maintained
Color Code
Round
CW1B-A2j CW4B-A2j
Black B
Dummy block CW-DB Green G
1. Specify a button color code in place of j.
Red R 2. *Operator button is not removable from operator.
Blue S
White W
Yellow Y
8
Pilot Lights
+ + + + =
9
Selector Switches
Shape
NO
1. Specify a bezel color code in place of 0 in the part number: 1 (black bezel), 4 (metallic bezel). 800.262.4332
2. Lever operator is also available. For dimensions, see page page 18.
3. To order a lever operator selector switch, insert L before E in the knob operator part number. www.IDEC.com/switches
Example: Knob Operator part number CW1S-2E10 becomes CW1S-2LE10 for Lever Operator.
L C R Operator
1 NO Position
2 NC
3 NC
CW1S-0L CW4S-0L
(black bezel) (metallic bezel)
10
Selector Switches
Operator C
Contact Block L C R L R L
C
R
Contact Position C
No. of L R
Configuration
Positions Mounting
(Code) Type L C R Spring return Spring return Spring return
Position Maintained
from right from left two-way
1 NO
1NO-1NC
2 — Dummy CW0S-3E11 CW0S-31E11 CW0S-32E11 CW0S-33E11
(11)
3 NC
1 NC
1NO-1NC
2 — Dummy CW0S-3E11N1 CW0S-31E11N1 CW0S-32E11N1 CW0S-33E11N1
(11N1)
3 NO
1 NO
1NO-1NC
2 NC CW0S-3E11N2 CW0S-31E11N2 CW0S-32E11N2 CW0S-33E11N2
(11N2)
3 — Dummy
1 — Dummy
1NO-1NC
2 NC CW0S-3E11N3 CW0S-31E11N3 CW0S-32E11N3 CW0S-33E11N3
(11N3)
3 NO
1 — Dummy
1NO-1NC
2 NO CW0S-3E11N4 CW0S-31E11N4 CW0S-32E11N4 CW0S-33E11N4
(11N4)
3 NC
1 NO
2NO
2 — Dummy CW0S-3E20 CW0S-31E20 CW0S-32E20 CW0S-33E20
(20)
3 NO
1 — Dummy
2NO
2 NO CW0S-3E20N1 CW0S-31E20N1 CW0S-32E20N1 CW0S-33E20N1
(20N1)
3 NO
1 NC
2NC
2 — Dummy CW0S-3E02 CW0S-31E02 CW0S-32E02 CW0S-33E02
(02)
3 NC
1 — Dummy
2NC
2 NC CW0S-3E02N1 CW0S-31E02N1 CW0S-32E02N1 CW0S-33E02N1
(02N1)
3 NC
1 NO
2NO-1NC
2 NO CW0S-3E21 CW0S-31E21 CW0S-32E21 CW0S-33E21
(21)
45° 3 NC
3-position 1 NO
2NO-1NC
2 NC CW0S-3E21N1 CW0S-31E21N1 CW0S-32E21N1 CW0S-33E21N1
(21N1)
3 NO
1 NO
1NO-2NC
2 NC CW0S-3E12 CW0S-31E12 CW0S-32E12 CW0S-33E12
(12)
3 NC
1 NC
1NO-2NC
2 NO CW0S-3E12N1 CW0S-31E12N1 CW0S-32E12N1 CW0S-33E12N1
(12N1)
3 NC
1 NO
3NO
2 NO CW0S-3E30 CW0S-31E30 CW0S-32E30 CW0S-33E30
(30)
3 NO
1 NC 1. Specify a bezel color
3NC
2 NC CW0S-3E03 CW0S-31E03 CW0S-32E03 CW0S-33E03 code in place of 0 in the
(03)
3 NC Part Number, 1 (black
bezel), 4 (metallic bezel)
NO/ NO
1 2. For the contact block
NC NC
2NO-2NC mounting position, see
2 — Dummy CW0S-3E22 CW0S-31E22 CW0S-32E22 CW0S-33E22
(22) page 10.
NO/ NO 3. Lever operator is
3
NC NC also available. For
NO dimensions, see page
1 2NO
NO page 18.
4NO 4. To order a lever operator
2 — Dummy CW0S-3E40 CW0S-31E40 CW0S-32E40 CW0S-33E40
(40)
NO selector switch, insert
3 2NO L before E in the knob
NO
operator part number.
NC
1 2NC Example: Knob Operator
NC
2NO-2NC part number CW1S-3E11
2 — Dummy CW0S-3E22N2 CW0S-31E22N2 CW0S-32E22N2 CW0S-33E22N2 becomes CW1S-3LE11 for
(22N2)
NC Lever Operator.
3 2NO
NC
11
Selector Switches
+ + =
Contact Block
Contact Contact Part
Style Contacts
Block Configuration Number
1NO YW-E10R
Single
1NC YW-E01
Finger-safe
Screw 2NO YW-EW2R0
terminal
Double 2NC YW-EW02 800.262.4332
1N0-1NC YW-EW1R1 www.IDEC.com/switches
CW-CN
Operator
Style Position Handle Description Black Bezel Metallic Bezel
Maintained CW1S-2 CW4S-2
Knob
Spring return from right CW1S-21 CW4S-21
2 position Maintained CW1S-2L CW4S-2L
Lever
Spring return from right CW1S-21L CW4S-21L
Maintained CW1S-3 CW4S-3
Spring return from right CW1S-31 CW4S-31
Knob
Spring return from left CW1S-32 CW4S-32
Spring return two-way CW1S-33 CW4S-33
3 position
Maintained CW1S-3L CW4S-3L
(knob operator shown) Spring return from right CW1S-31L CW4S-31L
Lever
Spring return from left CW1S-32L CW4S-32L
Spring return two-way CW1S-33L CW4S-33L
Lever or knob is supplied with operator
12
Key Selector Switches
Key Selector Switches (Assembled)
CW0K
Shape
Operator C L C R L
C
R L
C
R
Contact Block L R
No. of Contact Position
Positions Configuration Mounting
Type L C R Maintained Spring return Spring return Spring return
Position from right from left two-way
1 NO
1NO-1NC
2 — Dummy CW0K-3AE11 CW0K-31BE11 CW0K-32CE11 CW0K-33DE11
(11)
3 NC
1 NC
1NO-1NC
2 — Dummy CW0K-3AE11N1 CW0K-31BE11N1 CW0K-32CE11N1 CW0K-33DE11N1
(11N1)
3 NO
1 NO
1NO-1NC
2 NC CW0K-3AE11N2 CW0K-31BE11N2 CW0K-32CE11N2 CW0K-33DE11N2
(11N2)
3 — Dummy
1 — Dummy
1NO-1NC
2 NC CW0K-3AE11N3 CW0K-31BE11N3 CW0K-32CE11N3 CW0K-33DE11N3
(11N3)
3 NO
1 — Dummy Mounting Position
1NO-1NC
2 NO CW0K-3AE11N4 CW0K-31BE11N4 CW0K-32CE11N4 CW0K-33DE11N4
(11N4) 1 2 3
3 NC
1 NO
2NO
2 — Dummy CW0K-3AE20 CW0K-31BE20 CW0K-32CE20 CW0K-33DE20
(20)
3 NO
1 — Dummy
2NO
2 NO CW0K-3AE20N1 CW0K-31BE20N1 CW0K-32CE20N1
(20N1)
3 NO
1 NC Left Center Right
45° 2NC
2 — Dummy CW0K-3AE02 CW0K-31BE02 CW0K-32CE02
3-position (02) Operator
3 NC L C R
Position
1 — Dummy
2NC 1 NO
2 NC CW0K-3AE02N1 CW0K-31BE02N1 CW0K-32CE02N1
(02N1) 2 NC
3 NC
1 NO 3 NC
2NO-1NC
2 NO CW0K-3AE21 CW0K-31BE21 CW0K-32CE21
(21)
3 NC
1 NO
2NO-1NC
2 NC CW0K-3AE21N1 CW0K-31BE21N1 CW0K-32CE21N1
(21N1)
3 NO
1 NO 1. Specify a bezel color
1NO-2NC code in place of 0 in the
2 NC CW0K-3AE12 CW0K-31BE12 CW0K-32CE12
(12) Type No.: 1 (black bezel),
3 NC
1 NC
4 (metallic bezel)
1NO-2NC 2. On the spring-returned
2 NO CW0K-3AE12N1 CW0K-31BE12N1 CW0K-32CE12N1 CW0K-33DE12N1
(12N1) types, the key can be
3 NC released only from the
1 NO maintained position. On
3NO
2 NO CW0K-3AE30 CW0K-31BE30 CW0K-32CE30 CW0K-33DE30 the maintained types,
(30)
3 NO the key can be released
1 NC from every position.
3NC Key retained positions
2 NC CW0K-3AE03 CW0K-31BE03 CW0K-32CE03 CW0K-33DE03
(03) are also available. See
3 NC
page 13.
NO/ NO 3. Two keys are supplied.
1
NC NC
2NO-2NC 4. Key cylinder material:
2 — Dummy CW0K-3AE22 CW0K-31BE22 CW0K-32CE22 CW0K-33DE22 Metal
(22)
NO/ NO 5. Besides the standard
3
NC NC key (key number 0H), six
NO other keys are
1 2NO also available. See
NO
4NO 2 — Dummy CW0K-3AE40 CW0K-31BE40 CW0K-32CE40 CW0K-33DE40 page 13.
(40) 6. For the contact block
NO
3 2NO mounting position, see
NO above
NC 7. For dimensions, see
1 2NC
NC page 19.
2NO-2NC
2 — Dummy CW0K-3AE22N2 CW0K-31BE22N2 CW0K-32CE22N2 CW0K-33DE22N2
(22N2)
NC
3 2NC
NC
14
Key Selector Switches
+ + =
1NO YW-E10R
Single
1NC YW-E01 CW-CN
Finger-safe
Screw 2NO YW-EW2R0
terminal
Double 2NC YW-EW02
1N0-1NC YW-EW1R1
Operator
Style Position Description Black Bezel Metallic Bezel
Maintained, key removable all positions CW1K-2A CW4K-2A
Maintained, key removed left only CW1K-2B CW4K-2B
2 position
Maintained, key removed right only CW1K-2C CW4K-2C
Spring return from right CW1K-21B CW4K-21B
Maintained, key removable all positions CW1K-3A CW1K-3A
Maintained, key removed left and center only CW1K-3B CW4K-3B
Maintained, key removed right and center only CW1K-3C CW4K-3C
Maintained, key removed center only CW1K-3D CW4K-3D
Maintained, key removed left and right only CW1K-3E CW4K-3E
Maintained, key removed left only CW1K-3G CW4K-3G
Maintained, key removed right only CW1K-3H CW4K-3H
3 position
Spring return from right, key removed left and center only CW1K-31B CW4K-31B
Spring return from right, key removed center only CW1K-31D CW4K-31D
Spring return from right, key removed left only CW1K-31G CW4K-31G
Spring return from left, key removed right and center only CW1K-32C CW4K-32C
Spring return from left, key removed center only CW1K-32D CW4K-32D
15
Dimensions (mm)
Illuminated Pushbuttons
1 to 2 Contacts
Round Flush Round Extended
M3.5 Terminal Screw Panel Thickness 0.8 to 3.2 M3.5 Terminal Screw Panel Thickness 0.8 to 3.2
Contact Block Contact Block
10
10
3
10
10
2
10
10
1
M3.5 0.5 M3.5 0.5
Terminal Screw Terminal Screw
LED Module LED Module LO
Locking Ring Gasket LO Locking Ring Gasket CK
CK
28.5
28.5
(Lens Diameter)
(Lens Diameter)
ø19.5
ø19.5
41.4
ø28
41.4
ø28
2.5
Momentary: 39.9 2.5 30 Momentary: 39.9 5.2 30
Maintained: 44.6 Maintained: 44.6
4 Contacts
Round Flush Round Extended
M3.5 Terminal Screw Panel Thickness 0.8 to 3.2 M3.5 Terminal Screw Panel Thickness 0.8 to 3.2
Contact Block Contact Block
10 10 10
10 10 10
0.5 0.5
2nd-tier 1st-tier 2nd-tier 1st-tier
contact block (NC) contact block (NO) contact block (NC) contact block (NO)
28.5
28.5
(Lens Diameter)
(Lens Diameter)
41.4
ø19.5
ø19.5
41.4
ø28
ø28
2.5
Momentary: 59.9 2.5 Momentary: 59.9 5.2 30
30
Maintained: 64.6 Maintained: 64.6
800.262.4332
www.IDEC.com/switches
16
Dimensions (mm)
Pushbuttons
1 to 2 Contacts
Round Flush Round Extended
M3.5 Terminal Screw Panel Thickness 0.8 to 3.2 M3.5 Terminal Screw Panel Thickness 0.8 to 3.2
Contact Block Contact Block
10 10 10
10 10 10
0.5 0.5
Momentary Maintained Momentary Maintained
Locking Ring Gasket LO LO Locking Ring Gasket LO LO
CK CK CK CK
28.5
28.5
28.5
28.5
(Button Diameter)
(Button Diameter)
ø19.5
41.4
ø19.5
41.4
ø28
ø28
2.5
Momentary: 39.9 2.5 30 30 Momentary: 39.9 5.2 30 30
Maintained: 44.6 Maintained: 44.6
4 Contacts
Round Flush Round Extended
M3.5 Terminal Screw Panel Thickness 0.8 to 3.2 M3.5 Terminal Screw Panel Thickness 0.8 to 3.2
Contact Block Contact Block
10 10 10
10 10 10
0.5 0.5
2nd-tier 1st-tier 2nd-tier 1st-tier
contact block (NC) contact block (NO) contact block (NC) contact block (NO)
Momentary Maintained Momentary Maintained
Locking Ring Gasket LO LO Locking Ring Gasket LO LO
CK CK CK CK
28.5
28.5
28.5
28.5
(Button Diameter)
(Button Diameter)
ø19.5
41.4
ø19.5
41.4
ø28
ø28
2.5
Momentary: 59.9 2.5 30 30 Momentary: 59.9 5.2 30 30
Maintained: 64.6 Maintained: 64.6
Pilot Lights
Round Flush Round Dome
Panel Thickness 0.8 to 3.2 Panel Thickness 0.8 to 3.2
10
10 10
10
10
10
M3.5 M3.5
Terminal Screw 0.5 0.5
Terminal Screw
LED Module LED Module
Locking Ring Gasket LOC Locking Ring Gasket LOC
K K
28.5
28.5
(Lens Diameter)
(Lens Diameter)
ø19.5
ø19.5
41.4
41.4
ø28
ø28
2.5
39.9 2.5 30 39.9 4.1 30
17
Dimensions (mm)
Selector Switches
1 to 3 Contacts
Knob Operator Lever Operator
M3.5 Terminal Screw Panel Thickness 0.8 to 3.2 M3.5 Terminal Screw Panel Thickness 0.8 to 3.2
Contact Block Contact Block
10
10
10
10
10
10
0.5 0.5
Operator Angle Operator Angle
45 45º 45
Locking Ring Gasket 45º LOC º Locking Ring Gasket LOC º
K K
28.5
28.5
ø28
41.4
41.4
ø28
2.5 2.5
39.9 13.1 30 39.9 30
4 Contacts
Knob Operator Lever Operator
M3.5 Terminal Screw Panel Thickness 0.8 to 3.2 M3.5 Terminal Screw Panel Thickness 0.8 to 3.2
Contact Block Contact Block
10
10 10
10
10
10
0.5 0.5
2nd-tier 1st-tier 2nd-tier 1st-tier
contact block (NC) contact block (NO) contact block (NC) contact block (NO)
Operator Angle Operator Angle
45º 45 45º 45
Locking Ring Gasket LOC º Locking Ring Gasket LOC º
K 28.5 K
28.5
41.4
41.4
ø28
ø28
2.5 2.5
18
Dimensions (mm)
Key Selector Switches Keys
1 to 3 Contacts Reversible Key
M3.5 Terminal Screw Panel Thickness 0.8 to 3.2 8.8 22
8.8 22
Contact Block
10
14
14
10
Logo Stamping
10
45º 45
0 H
Locking Ring Gasket LOC º
0 H
K
28.5
Key No. Stamping
41.4
ø28
Non-reversible Key
8.8 22
8.8 22
2.5
10.4
14
14
6.3
39.9 31.5 30
6.3
Logo Stamping
Key No: 0H to 2H (reversible key) Logo Stamping Key No.
Key No.
3 H
3 H
Key No. Stamping
Key No. Stamping
31.5
4 Contacts
ø28
2.5
10.4
59.9 31.5 30
800.262.4332
www.IDEC.com/switches
19
Acccessories/Parts
Accessories
Package
Shape Material Part Number Remarks
Quantity
Locking Ring Wrench • Used to tighten the locking ring when installing the CW series control
unit in a panel cut-out. 110
8
Brass MW9Z-T1 1 • Weight: Approx 150g ø2
Replacement Parts
Shape Material Part Number Remarks
Lens 1 Round
Polyalylate CW9Z-L11k Color code k: A (amber), C (clear), G (green), R (red), S (blue), Y (yellow)
1 3 Flush
2 Use a clear (C) lens for white (PW) illumination.
2 Round
Polyalylate CW9Z-L12k 1: For illuminated pushbutton, pilot light
Extended
2: For illuminated pushbutton
3 Round 3: For pilot light
Polyalylate CW9Z-L15k
Dome
Single Contact Block Push rod color: Black
1NO YW-E10R Housing color: Blue/black
Push rod Terminal No.: 3-4
Housing
Push rod color: Red
1NC YW-E01 Housing color: Reddish purple
Terminal No.: 1-2
Double Contact Block Push rod color: black
2NO YW-EW2R0 Housing color: blue and black
Terminal No. 1st tier: 13-14, 2nd tier: 23-24
Push rod Push rod color: red
Housing 2NC YW-EW02 Housing color: reddish purple
Terminal No. 1st tier: 11-12, 2nd tier: 21-22
Push rod color: gray
1NO, 1NC YW-EW1R1 Housing color: reddish purple/blue
Terminal No. 1st tier: 13-14, 2nd tier: 21-22
Rubber Round
Boot Flush CW9Z-D11
(clear)
Round CW9Z-D12
Extended
Dummy
Block Polyamide
CW-DB
(black)
Locking
Ring Polyamide
CW9Z-LN
(black)
Gasket
Nitrile rubber CW9Z-WM Waterproof gasket between CW control unit bezel and the mounting panel.
Nameplate
Plastic CWAM-OB
20
Nameplates
LED Modules
Shape Operating Voltage Range Current Draw Part Number Illumination Color Code k
6V AC/DC±10% 15 mA CW-EAQ2k Specify an illumination color code
in place of k in the Part Number
12V AC/DC±10% 15 mA CW-EAQ3k
A: amber
24V AC/DC±10% 16.5 mA CW-EAQ4k G: green
PW: white
100/120V AC±10% 18 mA CW-EAQHk
R: red
230/240V AC±10% 18 mA CW-EAQM4k S: blue
Use a white (PW) LED module for yellow (Y) illumination.
HAND-OFF-AUTO 317
1. In place of j, insert either the standard legend 1. To order engraved nameplates, add legend code to nameplate part number.
code from table below or custom engraving 2. Character height based on the number of characters and size of nameplate. Standard character size is 3/16”.
delimited by “ “. 3. Nameplates with standard legends are the same list price as blank nameplates.
2. Standard engravings are available at no charge.
CWAM Nameplate
7/64”
Engraving Step 1.
Letter
11 characters maximum
Location
Choose Letter Size - 7/64” or 1/8”. (for 7/64” size letters)
Check the box for the letter size you want. Then Size
write your lettering in box below the check 1/8”
boxes. Note: 1/8” size letters cannot exceed 9 9 characters maximum
Letter
characters. (for 7/8” size letters)
Size
Step 2. Sample Letter Sizes
Specify Quantity.
7/64” Letters: A B C D
Enter the number of nameplates
desired in the box on the right.
Qty 1/8” Letters: A B C D
1 2 3 4 5 6 7 8 9 10 11
21
Precautions & Instructions
Safety Precautions
Turn off the power to CW series switches before installation, removal, When wiring, use wires of a proper size to meet the voltage and current
wiring and maintenance. Failure to turn power off may cause electrical requirements. Tighten the M3.5 terminal screws to a tightening torque of
shocks or fire hazard. 1.0 to 1.3 N·m. Failure to tighten the terminal screws may cause over-
heating and fire.
Operating Instructions
Notes for Operation Removing and Installing the Contact Unit Illuminated Pushbuttons and Pilot Lights
1. To remove the contact block from the opera-
tor, push the yellow locking lever and turn it Removing the Lens
When using the CW series switches in a To remove the lens from an illuminated pushbutton
to the left.
safety-related circuit of a control system, or pilot light, insert a flat screwdriver under the
observe safety rules and regulations of Locking Lever
flange of the lens at 90° from the TOP marking and
each country concerning particular applica- twist the screwdriver.
tions of the actual machines and facilities.
Do not insert the screwdriver too far and do not ap-
Perform risk assessment before operation
ply excessive force to the lens, otherwise the bezel
to ensure safety.
surface may be damaged.
1. Mounting hole dimensions are in compli- TOP marking on selector and key
ance with IEC60947-5-1. selector switches Groove in the Lens
9
5. 5.
9
ø1 ø1
Thickness: 0.2 mm maximum
Film material: Polyester (recommended)
Note: Film is not supplied and must be provided by the user.
22
Precautions & Instructions
6.9 max.
3.6 min.
module in the same manner. 8.1 max.
Turn the selector operator or key to the detent
positions.
1.7 max.
1.7 max.
key cylinder. (The standard key does not have Solid wire: ø1.6 mm maximum
a key number.) Insulation
ø1.6 max.
800.262.4332
www.IDEC.com/switches
23
16mm LB Series Miniature Switches
With a choice of metallic or black plastic bezels, and flush or standard mounting,
our newest miniature flush mount switches add style and safety to any application.
All LB switches are UL recognized, TUV approved, CSA certified and CE marked, as
well as provide an IP65 degree of protection. Available in illuminated pushbuttons,
pushbuttons, pilot lights, selector switches and key selector switches, these switches
are perfect for use with instrumentation, communication equipment, computer
peripheral, telecom, medical equipment, food and beverage processing equipment,
semi-conductor equipment, non-industrial applications (train cab, parking machines,
audio/visual equipment), panels and more!
www.IDEC.com