Beruflich Dokumente
Kultur Dokumente
REAR VIEW
PPTK 165/30
ELECTRICAL CONTROL
The electrical control system is a
CROWNING switch cabinet on the left-hand side
of the machine. Mainly electical
Bending the whole sheet length need the
components are in accordance with
parallelism between the table and the ram which BACK GAUGE the DIN or ISO standard. The
also be consistent YSD s machine has built into
Back gauge with manual adjustment in machine is fitted with man)
the table for crowning.
mechanical readout or with motorized Telemechanique components which
adjustment in LED display and with NC have overload protection reliability
Standard : Adjustable crowning table
control X-axis in order to position and the ser vice are easily obtainable
counter. throughout the world.
Option : Adjustable crowning on
top tooling clamping
TOOLING
All YSD toolings are heat -treated before machining for exceptionally long life
and minimum wear resistance.
OPTIONALS HYDRAULIC/NC PRESS BRAKE
FEATURES DA - 41 To Control X & Y for PPTK
D Positioning control of back gauge. D LCD display D Bending depth control
D Intelligent positioning control. D Back gauge control D Angle programming
D Unilateral and bidirectional positioning which D Tool parameter setting D Retraction
eliminates spindle clearance effectively.
D 100 program D 25 steps per program
D Retract functions.
D Swing arm control D Ser vo motor + ball screw
D Automatic reference searching.
D One-key parameter backup and restore.
CONTROL PANEL
D Fast position indexing.
D 40 programs storage space, each program has 25
steps. D Power-of f protection
CONTROL PANEL
Pressing force kN 400 400 500 700 700 700 1000 1000 1000 1350 1350 1 650 1650 1650 2000 2500 2500
Working length mm 2000 2500 2000 2500 3000 4000 2500 3000 4000 3000 4000 3000 4000 6000 3000 3050 4000
Dist. between housings mm 1640 2050 1640 2050 2550 3150 2050 2550 3150 2550 3150 2550 3150 4050 2500 2550 3150
Stroke of the ram mm 100 100 100 100 100 100 130 130 130 130 130 150 150 150 150 200 200
Adjustment of ram travel mm 80 80 80 80 80 80 110 110 110 110 110 120 120 120 130 140 140
Dist. between table & ram mm 300 300 300 300 300 300 310 310 310 310 310 350 350 350 400 425 425
Depth of throat mm 200 200 200 300 300 300 300 300 300 300 300 300 300 300 300 300 300
Width of tabel mm 140 140 140 140 140 140 180 180 180 180 180 180 180 180 180 250 250
Approaching speed mm/s 100 100 78 100 100 100 100 100 100 100 100 100 100 100 100 100 100
Weight of machine kg 2500 3000 3700 4550 4850 6200 5820 6800 9400 7500 9260 8800 11320 16240 18000 14000 17500
Back gauge distance mm 400 400 400 600 600 600 600 600 600 600 600 600 600 600 600 600 600
Volume of oil tank l 63 63 63 110 110 110 125 125 125 125 125 1 65 165 1 65 200 315 200
Length of machine mm 2160 2660 2160 2660 3145 4050 2645 3145 4050 3145 4050 3145 4050 6050 3100 3165 4050
Width of machine mm 1110 1110 1195 1275 1275 1275 1330 1330 1330 1435 1435 1550 1 550 1 550 1 560 1850 1800
Height of machine mm 1980 2110 2100 2110 2110 2430 2420 2420 2520 2420 2520 2560 2760 3035 2610 2920 2400
* (K) - NC Series