Beruflich Dokumente
Kultur Dokumente
GCA
Bayonet and threaded
2 List of contents
General description 3
Electrical properties 4
Mechanical properties 5
Contact arrangements 8
GCA00E-B & GCA00E : Receptacle back panel mounting flange, cable clamp and bushing 20
GCA00M-B & GCA00M : Receptacle back panel mounting flange, shielding braids and heat shrink 21
GCA00PG-ME-B & GCA00PG-ME : Receptacle back panel mounting flange, PG or metrical backshell 23
GCA00EGM-B & GCA00EGM : Receptacle back panel mounting flange, universal shielded backshell 24
GCA06M-B & GCA06M : Plug with grounding finger, shielding, heat shrink 35
GCA06EGM-B & GCA06EGM : Plug with grounding finger, shielding, universal backshell 37
GCA08E-B & GCA08E : Plug, 90° backshell, cable clamp and bushing 38
GCA08EGM-B & GCA08EGM : Plug with grounding finger, 90° backshell and universal backshell 40
Accessories41–46
Crimp-Contacts47–48
EGM-Backshell50
General description 3
GCA
These connectors with reverse bayonet coupling are compliant to the VG95234 standard. Offering a high
liability, they are coevally waterproof and resistant to vibrations and wear. They use the same installation
dimensions and contact arrangements as connectors according to MIL-C-5015, however they are
providedwith reverse bayonet coupling and ondular washer, which guarantee a fast and effortless locking/
unlocking and avoid an unintentional unlatch due to heavy vibrations.
This series comes standard with a nickel surface and solder contacts.
Common applications include industrial plants and railway vehicles as well as propulsion technologies,
machine tools, measurement and robotics.
The GCA-B connectors are fully interchangeable and intermateable with GCB-B connectors. They also
offer a variety of additional arrangements. They have the same technical setup as GCB-B series.
Bayonet
Thread
4 Electrical properties
110 3 2500
100
4 3000
90
80
70 60/100/8
60
50
Air creepage and creeping distance
40 25/12
Voltage class 1 2 3 4
30
15S/16S/15/16 Value (mm) 0,7 1,1 2,8 4,8
20
10 10
0
20 40 60 80 100 120
(°C) Rated voltage
If the connectors shown in this catalogue are used for voltage
> 50 V eff against earth, all accessible conductive parts have
Insulation resistance to be included reliably into the preventive measures of the
equipment. These connectors must not be connected or
≥ 1.000 MΩ
disconnected under voltage.
Mechanical properties 5
Series
00 – Wall Mount receptacle with backshell, rear mounting
01 – Cable connecting plug with backshell
02 – Box mounting receptacle, front mounting*
20 – Box mounting receptacle, rear mounting*
06 – Plug, straight
08 – Plug, 90°
Class
E – Backshell with cable clamp
F – Backshell for flex tube
PG / ME – Backshell for PG termination / Backshell for metric termination
M – Backshell for shielding braids and heatshrink
EGM11 - Backshell with integrated gland for screen termination (Cable min. 5,7
mm - max. 10,85 mm)
EGM21 – Backshell with integrated gland for screen termination (Cable min. 12,7
mm - max. 17,85 mm)
L – PCB solder termination (only Series 02 and 20)
Shell size + contact arrengements
10SL , 12S , 14S , 16S , 16 , 18 , 20 , 22 , 24 , 28 , 32 , 36
Contact arrengements see page 8 – 16
Contact type
P – Pin
S – Socket
Angular insert position
N – Normal (no suffix)
Alternate positions: W , X , Y , and Z see page 8 – 16
Coupling
B – Bayonet coupling
Without designation – threaded coupling
Modification
01 – Metric crimp contacts
F80 - AWG crimp contacts
03 – Backshell for heat shrink and metric contacts (Bayonet only)
06 – Backshell for heat shrink and solder pot contacts (Bayonet only)
44 – With endring and grommet (class E and F only)
48 – Backshell F with O – Ring to the plug
BM29 – Threaded flange holes, shell style 00/20 (threaded only)
DN – Backshell for heat shrink (threaded only)
F0 – Without contacts (to be ordered separately)
F42 – Without backshell
A176 – Gold plated contacts
* = no backshells available
How to order 7
Front face of pin Contact Contacts Voltage class for Angular position of the contact insert
insert illustrated arrangement Number Size contacts N W X Y Z
12SA-10
12SA-10 4 15S 1600 V 0
14SA-7
Front face of pin Contact Contacts Voltage class for Angular position of the contact insert
insert illustrated arrangement Number Size contacts N W X Y Z
2 15
1 100
2 15
2 25
2 Pin 25A
2 Socket 25
B,C,F,G – 1600 V
5 15
2 25
Insert arrangements 11
Front face of pin Contact Contacts Voltage class for Angular position of the contact insert
insert illustrated arrengement Number Size contacts N W X Y Z
3 25
1 60
A,B,G,H – 2500 V
20-7 8 15 0 80 110 250 280
C,D,E,F – 1600 V
4 15
2 100
J – 2500 V;
20A9 9 25 0 110 250
all other – 1050 V
Front face of pin Contact Contacts Voltage class for Angular position of the contact insert
insert illustrated arrengement Number Size contacts N W X Y Z
7 15
2 25
3 AWG 8
3 15
20-33 11 15 1600 V 0
3 15
2 100
Front face of pin Contact Contacts Voltage class for Angular position of the contact insert
insert illustrated arrengement Number Size contacts N W X Y Z
H – 2500 V;
22-23 8 25 0 35 250
all other – 1600 V
8 15
J – 2500 V;
22-27 0 80 250 280
all other – 1600 V
1 60
C
3 15
B D
24-4
24-4 2500 V 0 80 110 250 280
A
1 500
14 15
2 25
Front face of pin Contact Contacts Voltage class for Angular position of the contact insert
insert illustrated arrengement Number Size contacts N W X Y Z
6 AWG12* Metr 25
3 AWG 12
2 AWG 4
9 15
2 25
6 25
6 15
18 15
4 25
4 15
10 25
Insert arrangements 15
Front face of pin Contact Contacts Voltage class for Angular position of the contact insert
insert illustrated arrengement Number Size contacts N W X Y Z
AWG 16*
3
Metr 15
28-22 2500 V 0 70 145 215 290
AWG 4*
3
Metr 160
A
B C
5 15
D E F
28-A16
28A16 1600 V 0 Spec
G H
J 4 AWG 4
19 15
E – 1600 V;
28A63 0 100 260
all other – 1050 V
9 25
AWG 12*
3
Metr 25
A – 3000 V;
32-1 0 80 110 250 280
all other – 2500 V
AWG 0*
2
Metr 500
4 AWG 16
2 AWG 12
32-3 2500 V 0 80 110 250 280
2 AWG 4
1 AWG 0
32-5
32-5 2 AWG 0 2500 V 0 35 110 250 325
B
16 AWG16* Metr 15
28 15
A,B,H,J – 1050 V;
32-7 0 80 125 235 280
all other – 1600 V
7 25
Front face of pin Contact Contacts Voltage class for Angular position of the contact insert
insert illustrated arrengement Number Size contacts N W X Y Z
41 10
20 15
A
B C 6 25
D E
32-15
32-15 2500 V 0 35 110 250 325
F G H
2 500
32-17
32-17 4 AWG 4 2500 V 0 45 110 250
AWG 12*
3
Metr 25
36-3 2500 V 0 70 145 215 290
AWG 0*
3
Metr 500
AWG 0*
36-5 4 1600 V 0 120 240
Metr 500
4 AWG 4
2 AWG 0
A
H B
4 15
G C
36A35
36A35 1600 V 0
F D
E 4 0
The angular positions W, X, Y and Z are used when polarisation is required for connectors of the same size and same number of
poles. The following figures show the view on the front face of the pin insert or the termination face of the socket insert.
Mounting dimensions
Connector type 06 E
Connector type 06 F
Connector type 06 M
Shell size l1 min. l2 min. l3 min. l4 min. l5 min. l6 min. l7 min l8 min l9 min l10 max. l11 max.
10SL 70 70 65 70 75 80 70 70 70 8,0 3,5
12S 70 70 65 70 75 80 75 75 75 8,0 3,5
14S 70 70 65 70 75 80 75 75 75 8,0 3,5
16S 70 70 65 70 75 80 80 80 80 8,0 3,5
16 80 80 75 80 85 90 90 90 90 8,0 3,5
18 90 90 85 90 95 100 90 90 90 8,0 3,5
20 90 90 85 90 95 100 95 95 95 8,0 3,5
22 90 90 85 90 95 100 95 95 95 8,0 3,5
24 110 110 100 110 115 120 105 105 105 8,0 5,0
28 110 110 100 110 115 120 105 105 105 9,0 5,0
32 110 110 100 110 115 120 115 115 115 9,0 6,0
36 110 110 100 110 115 120 120 120 120 9,0 6,0
Mounting dimensions 19
Connector type 08 F
Connector type 08 E
Shell size l1 min. l2 min. l3 min. l4 min. l5 min. l6 min. l7 min l8 min l9 min l10 max. l11 max.
10SL 70 70 65 70 75 80 70 70 70 8,0 3,5
12S 70 70 65 70 75 80 75 75 75 8,0 3,5
14S 70 70 65 70 75 80 75 75 75 8,0 3,5
16S 70 70 65 70 75 80 80 80 80 8,0 3,5
16 80 80 75 80 85 90 90 90 90 8,0 3,5
18 90 90 85 90 95 100 90 90 90 8,0 3,5
20 90 90 85 90 95 100 95 95 95 8,0 3,5
22 90 90 85 90 95 100 95 95 95 8,0 3,5
24 110 110 100 110 115 120 105 105 105 8,0 5,0
28 110 110 100 110 115 120 105 105 105 9,0 5,0
32 110 110 100 110 115 120 115 115 115 9,0 6,0
36 110 110 100 110 115 120 120 120 120 9,0 6,0
20 Receptacle back panel mounting flange, cable clamp and bushing GCA00E – B
Receptacle back panel mounting flange, cable clamp and bushing GCA00E
Receptacle back panel mounting flange, shielding braids and heat shrink GCA00M
Plug with grounding finger, 90° backshell and universal backshell GCA08EGM
Gaskets
Version A: Version B:
Admissible ambient temperature: -55 °C to 160 °C Admissible ambient temperature: -55 °C to 160 °C
Fluor silicone with Ag/Al conductive filler Fluor silicone with Ni/C conductive filler
Hardness (65 ± 10) Shore A according to DIN EN ISO Hardness (75 ± 7) Shore A according to DIN EN ISO
868 Colour: blue-grey 868 Colour: dark-grey
Shielding effectiveness: 80 dB Shielding effectiveness: 70 dB
46 Gaskets
S
d1 d2 e l Version 2
Size Version 1
+1 +0,5 ±0,2 ±0,5 A and B
±0,4
±0,2
10SL 15,7 4,2 18,2 25,4 1 0,5
12S 19,1 4,2 20,6 27,8 1 0,5
14S 22,1 4,2 23,0 30,0 1 0,5
16S / 16 25,3 4,2 24,6 32,5 1 0,5
18 28,4 4,2 27,0 35,0 1 0,5
20 31,6 4,2 29,4 38,0 1 0,5
22 34,8 4,2 31,8 41,0 1 0,5
24 38,0 4,2 34,9 44,5 1 0,5
28 44,3 5,1 39,7 50,8 1 0,8
32 50,7 5,1 44,5 57,0 1 0,8
36 57,0 5,1 49,2 63,5 1 0,8
S
d1 d2 e l Version 2
Size Version 1
+0,3 +0,5 ±0,2 ±0,5 A and B
±0,4
±0,2
10SL 18,2 4,2 18,2 25,4 1 0,5
12S 21,4 4,2 21,4 28,0 1 0,5
14S 24,6 4,2 23,0 30,0 1 0,5
16S / 16 27,4 4,2 24,6 32,5 1 0,5
18 30,8 4,2 27,0 35,0 1 0,5
20 34,2 4,2 29,4 38,0 1 0,5
22 37,4 4,2 31,8 41,0 1 0,5
24 40,9 4,2 34,9 44,5 1 0,5
28 46,7 5,1 39,7 50,8 1 0,8
32 53,4 5,1 44,5 57,0 1 0,8
36 59,6 5,1 49,2 63,5 1 0,8
Crimp-Contacts 47
60 – 3,6 0,4 7,6 –0,20 6,25 –0,15 7,6 –0,20 6,80 –0,10
VG95234P60-001 GCB60M-001 GCB60M-001-A176 2,50 +0,05
– 8 VG95234P8 GCB8M GCB8M-A176 3,6 0,4 7,6 –0,20 6,25 –0,15 7,6 –0,20 4,55 +0,10 6,80 –0,10
100 – VG95234P100 GCB100M GCB100M-A176 3,6 0,4 7,6 –0,20 6,25 –0,15 7,6 –0,20 4,80 +0,10 6,80 –0,10
VG95234P160 GCB160M GCB160M-A176 6,20 +0,15
160 – 5,75 2,5 11,2 –0,20 9,55 –0,15 11,2 –0,20 9,55 –0,10
VG95234P160-001 GCB160M-001 GCB160M-001-A176 5,70 +0,10
– 4 VG95234P4 GCB4M GCB4M-A176 5,75 2,5 11,2 –0,20 9,55 –0,15 11,2 –0,20 7,10 +0,15 9,55 –0,10
VG95234P500 GCB500M GCB500M-A176 10,70 +0,15
500 – VG95234P500-001 GCB500M-001 GCB500M-001-A176 9,1 5,8 15,15 –0,20 13,55 –0,15 15,15 –0,20 7,60 +0,15 14,35 –0,10
VG95234P500-002 GCB500M-002 GCB500M-002-A176 9,10 +0,15
– 0 VG95234P0 GCB0M GCB0M-A176 9,1 5,8 15,15 –0,20 13,55 –0,15 15,15 –0,20 11,50 +0,15 14,35 –0,10
15,15 –0,20
500 – VG95234S500-001 GCB500F-001 GCB500F-001-A176 7,60 +0,15 14,35 –0,10 13,55 –0,20 13,2 –0,20 9,15 ±0,05 41,6 ±0,20
VG95234S500-002 GCB500F-002 GCB500F-002-A176 9,10 +0,15
– 0 VG95234S0 GCB0F GCB0F-A176 11,50 +0,15 5,8 15,15 –0,20 13,55 –0,15 15,15 –0,20 11,50 +0,15 14,35 –0,10
VG95236T11A0001
Note:
Rubber Bush supplied in Packing
In case of PHM inner metal ferrule is not required/supplied
Please contact
Amphenol-Air LB GmbH
Am Kleinbahnhof 4
66740 Saarlouis
Phone +49 6831 9810-0
Fax +49 6831 9810-20
E-Mail info@amphenol-airlb.de
GCA series
www.amphenol-airlb.de