Sie sind auf Seite 1von 53

Great Company Great People

Hurricane3 High chassis guide

Table of contents

1. Specification
2. Block Diagram
3. Trouble Shooting
4. Debugging Method
5. Adjustment UI Specification
6. Document

2006.05.03
DDC PA Gr

Great Company Great People -1/53- Blue Ocean P³ Innovation


Model Concept

Design

42PC1R 37LC2R
H&C 2 Tone

• New XD Engine
• 10 Bit
• HDMI
Feature • 3D Surround (Royalty Free)
• 1Tuner(EU), 2Tuner(Non-EU)
• AV Input Navigation
• Stand-by Power consumption 1W
• On Screen Equalizer

• Clear Filter
• Brightness : 1,200 ㏅/㎡ • Brightness : 500 ㏅/㎡
Module • Contrast : 10,000 : 1 • Contrast : 1600 : 1
• ASIC : 4025적용 • View Angle : 178 ˚

Great Company Great People -2/53- Blue Ocean P³ Innovation


Model Concept

Tool line up

Type 42X 50X

H&C ● ●
PB2 PC1/PC3

▶ PB2 Tool(Better High) All H&C

구분 26” 32” 37” 42”

H&C
LB2 LC2
2 Tone

▶ LB2 Tool(Better High) All H&C

Great Company Great People -3/53- Blue Ocean P³ Innovation


Model Specification

Model 37LC2R-ZH 37LC2R-TH 42LC2R-ZH 42LC2R-TH 32LB1R-TH 37LB1R-TH 42LB1R-TH

Aspect Ratio 16:9 16:9 16:9 16:9 16:9 16:9 16:9


Cell Pitch(mm) 0.2 × 0.6 0.2 × 0.6 0.227 × 0.681 0.227 ×0.681 0.17 × 0.51 0.2 × 0.6 0.227 ×0.681
Screen size(mm) 940.3 940.3 1067.3 1067.3 800.4 940.3 1067.3
Resoultion 1366X768 1366X768 1366X768 1366X768 1366X768 1366X768 1366X768
(WXGA) (WXGA) (WXGA) (WXGA) (WXGA) (WXGA) (WXGA)
Luminance (cd/㎡) 500 500 500 500 500 500 500
V
I Contrast Ratio 1200:1 1200:1 1200:1 1200:1 1200:1 1200:1 1200:1
D
View Angle 178˚Min 178˚Min 178˚Min 178˚Min 178˚Min 178˚Min 178˚Min
E
O Color(R,G,B) 16.7 Mil 16.7 Mil 16.7 Mil 16.7 Mil 16.7 Mil 16.7 Mil 16.7 Mil
Input Signal PAL Multi PAL Multi Multi Multi Multi
OSD Language E/F/G/S/I/ E/C/F/G/S E/F/G/S/I/SW/ E/C/F/G/S E/C/F/G/S E/C/F/G/S E/C/F/G/S
SW/N/D /Arab/Parsi N/D /Arab/Parsi /Arab/Parsi /Arab/Parsi /Arab/Parsi
Market place EU N-EU EU N-EU N-EU N-EU N-EU
Remark 1-Tuner 2-Tuner 1-Tuner 2-Tuner 2-Tuner 2-Tuner 2-Tuner

Great Company Great People -4/53- Blue Ocean P³ Innovation


Model Specification

Model 37LC2R-ZH 37LC2R-TH 42LC2R-ZH 42LC2R-TH 32LB1R-TH 37LB1R-TH 42LB1R-TH

RF In 1 1 1 1 1 1 1
AV in 4 2 4 2 2 2 2
Monitor out 1 1 1 1 1 1 1
S-Video in 1 1 1 1 2 2 2
J Component 1 2 1 2 2 2 2
A Input(Y,Pb,Pr)
C
Variable 1 1 1 1 1 1 1
K
Audio out
PC Audio In 1 1 1 1 1 1 1

RGB Input 1 1 1 1 1 1 1

RS-232C 1 1 1 1 1 1 1

Remote control 1 1 1 1 1 1 1

AC Input 110-240V 110-240V 110-240V 110-240V 110-240V 110-240V 110-240V


50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz

Power Consumption 190 190 230 230 140 190 230

SIZE (W x H x D) 944×729 944×729 1054×813×2 1054×813 911.4×599 1045.8×693.8 1175×768×3


(mm) ×286 ×286 86 ×286 ×259 ×260.4 00
:with stand

Weight with 35.5 35.5 42.3 42.3 22.6 31.6 41.4


Packing(kg)

Great Company Great People -5/53- Blue Ocean P³ Innovation


Model Specification

Model 42PC1R-ZH 42PC1R-TH 42PC1R-CH 42PC3R-ZH 50PC1R-ZH 50PC1R-TH 50PC1R-CH

Aspect Ratio 16:9 16:9 16:9 16:9 16:9 16:9 16:9


Cell Pitch 300(um) × 300(um) × 300(um) × 270(um) 270(um) × 270(um) × 270(um) ×
676(um) 676(um) 676(um) × 810(um) 810(um) 810(um) 810(um)

Resolution 1024X768 1024X768 1024X768 1024X768 1366X768 1366X768 1366X768


(XGA) (XGA) (XGA) (XGA) (WXGA) (WXGA) (WXGA)
Peak White 340 /540 340 / 540 340/ 540) 340(540) 280(400) 280(400) 280(400)
V /special (cd/㎡)
I Contrast Ratio 10000:1 10000:1 10000:1 10000:1 10000:1 10000:1 10000:1
D (1% full white (1% full white (1% full white (1% full white (1% full white (1% full white (1% full white
E window window window window window window window
O in dark room) in darkroom) in dark room) in dark room) in dark room) in dark room) in dark room)
Market place EU N-EU China EU EU N-EU China
Remark 1-Tuner 1-Tuner 1-Tuner 1-Tuner 2-Tuner 2-Tuner 1-Tuner

Great Company Great People -6/53- Blue Ocean P³ Innovation


Model Specification

Model 42PC1R-ZH 42PC1R-TH 42PC1R-CH 42PC3R-ZH 50PC1R-ZH 50PC1R-TH 50PC1R-CH

RF In 1 1 1 1 1 1 1
AV in 4 2 2 3 4 2 2
Monitor out 1 1 1 1 1 1 1
S-Video in 1 1 1 1 1 1 1
J Component 1 2 2 2 1 2 2
A Input(Y,Pb,Pr)
C
Variable 1 1 1 1 1 1 1
K
Audio out
PC Audio In 1 1 1 1 1 1 1

RGB Input 1 1 1 1 1 1 1

RS-232C 1 1 1 1 1 1 1

Remote control 1 1 1 1 1 1 1

AC Input 110-240V 110-240V 110-240V 110-240V 110-240V 110-240V 110-240V


50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz

Power Consumption 330 330 330 330 430 430 430

SIZE (W x H x D) 1129×748.5 1129×748.5 1129×748.5 1129×748.5 1302.6×872 1302.6×872 1302.6×872


(mm) ×380 ×380 ×380 ×336.6 ×355.8 ×355.8 ×355.8
:with stand

Weight with 29.3 29.3 29.3 31.3 51.5 51.5 51.5


Packing(kg)

Great Company Great People -7/53- Blue Ocean P³ Innovation


Main Feature Compare with H2

Platform Version Up (H2→H3) Added features in circuit

• LCD Board & PDP Board is different • New XD Engine


à Same PCB Board (With option) -. Adaptive NR
• Main/Sub IC is separate -. No noise boosting Sharpness
à Main/Sub Picture IC were merging -. Sub Picture Y/C Separate Sharpness
(Only One Main IC : XD8662) Control
• Blue-tone stretch (Only White region)

New Feature of PDP Module Improved Function from H2

• Decrease the reflection of eternal light • Sub Picture 3D Comb Filter


-> increase the clarity and contrast • 8Bit à10 Bit Signal Processing
(XGA Grade extended) (Decoder, ADC, de-interlacer, Output)

• 10 Bit Input and Processing


• Adopt Low Contour noise Algorithm Productivity
• Support DMS Full process
(Productivity will be very higher then
previous model)

Great Company Great People -8/53- Blue Ocean P³ Innovation


H3 High Whole Block Diagram
유선IR TX IR K4D261638F-LC50X2
HDMI_DATA DDRRAM(128MB X2)
HDMI_CLK/DE
RS232 Tx/Rx : ±15Vpp ST3232C HDMI_VS/HS AT49BV160C
TXD /RXD : 5V Digital F-ROM(2MB)
DSUB_SCL / DSBU_SDA
RGB_PC 24C02 VGA_RGB : 0.7Vpp
RGB_DTV AIP_RAW_VS / AIP_RAW_HS_CS : 5V High/Low
DS_VS / DS_HS COMP_Y/Pb/Pr : 1/0.7Vpp
74HC14
COMP2_Y/Pb/Pr : 1/0.7Vpp
PC_Audio PC_Audio_L/R : 700mVrms SCART1_RGB : 0.7Vpp
SCART1_FB Tx0/1/2/3/4/C±
DISP_EN
COMP Comp_L/R : 500mVrms MAIN SCALER SCL/SDA_Part
Comp_SW
Comp_SW XD8662 OUTPUT
Comp2_SW
CN_IIS MC_IIS 31P_LVDS
COMP2 I2C
Comp2_L/R : 500mVrms
Comp2_SW

MAIN_V or Y/C OUT : 2Vpp Variable_audio_out L/R


SCART1_LIN/RIN : 500mVrms SUB_V : 2Vpp
Scart1 SCART1_ID
(TV_out) SCART1_VIN : 1Vpp
PC_Audio_L/R
SCART1_ID AM_Audio / S I F
Scart2 SCART2_LIN/RIN : 500mVrms SCART2_ID Audio S/W
COMP1,2_RIN/LIN
SCART2_ID SCART2_VIN/YIN/CIN : 1/0.285Vpp & CONTROL
(MNT_OUT) AV_LOUT/ROUT MSP4450K
MNT_LOUT/ROUT
MNT_OUT HDMI_IIS
TV_L/R OUT : 500mVrms
I2C TU_MAIN : 1Vpp
TUNER AV SWITCH
RF SIF
(MAIN) AM_Audio SCART1,2_LIN/RIN CXA2069Q I2 C
TUNER I2S (SCK/WCK/DATA)
Rear AV TU_SUB : 1Vpp
(SUB) LIN3/RIN3 : 500mVrms
(AV3)
VIN3/YIN3/CIN3 : 1/0.285Vpp
AV3_SW/S3_SW
MNT_OUT : 1Vpp L_CH
MNT_OUT MNT_LOUT/ROUT : 500mVrms PWM AMP L_SPK_OUT
I2 C
NTP2000H R_CH TAS5122 R_SPK_OUT
I2C HDMI_DATA : 3.3V
HDMI Rx HDMI_CLK/DE : 3.3V
I2 C I2 C
ANX9021 HDMI_IIS : 3.3V
HDMI1/2
HDMI_VS/HS : 3.3V
AV4_SW/S4_SW
24C02 VIN4/YIN4/CIN4 : 1/0.285Vpp Video Signal
SCL/SDA
Variable Variable_audio_out L/R : 500mVrms LIN4/RIN4 : 500mVrms
Audio_out Audio Signal

Great Company Great People -9/53- Blue Ocean P³ Innovation


Main Scaler(XD8668) Features

Great Company Great People -10/53- Blue Ocean P³ Innovation


Main Scaler(XD8668) Block Diagram

• The FLI8668 chip has a flexible Analog Front End (AFE) with 13 configurable inputs through an analog multiplexer before the Analog to Digital Converters
(ADCs).

• It also contains an embedded Multi-Standard Video Decoder. This decoder contains a digital comb filter for optimum Y/C separation. A 3D comb filter is a
vailable for optimum Y/C separation, that reduces or eliminates any artifacts due to poor Y/C separation seen on standard 2D video decoders on composite
inputs, most commonly found on TV tuners.

• The FLI8668 microprocessor can process a wide range of Vertical Blanking Interval (VBI) data and display this data with the bitmap OSD processor. The
microprocessor can support VBI data processing in the Main or PIP channels as well as in the background when the corresponding video stream is not pre
sent on the output stream. The VBI dataslicer can extract data encoded into the VBI of the input video stream. Decoded data bytes from the VBI dataslicer
are stored in a memory buffer for subsequent processing by the microprocessor. The microprocessor decodes the different formats of the VBI data and pas
ses the information to the OSD controller for output to the display controller. The VBI decoding process can run continuously in the background for inputs th
at contain VBI data.

Great Company Great People -11/53- Blue Ocean P³ Innovation


Main Scaler(FLI8668) Block Diagram Explanation

• The Digital Input Port is a 48-bit data input with flexible configuration to support a wide range of digital sources. It consists of two 24-bit ports (PORT
A and PORTB),two sets of control signals (VS,HS,ODD,etc.), and 4 input clocks. Up to 4 different inputs are supported as long as at least 2 of these in
puts are 8-bit CCIR656. The digital input port can also be configured to support one 30-bit input with a second 16-bit input port. Bit 7 to 0 of PORTA ca
n be configured as a bidirectional interface for media card applications.

• DCDi (Directional Correlation De-Interlacing) is an algorithm from Genesis Microchip’s Faroudja division, that is used to deinterlace video content (co
nvert from interlaced to progressive scan). DCDi is known for its smooth interpolation of video content as it fills in the missing lines. Its purpose is to eli
minate jagged edges (jaggies) along diagonal lines caused by interpolation, resulting in the projection of cinema-like images with exceptional picture q
uality.

• The FLI8668 allows a very flexible PIP display configuration whereby either the graphics or video channel may act as the PIP source to overlay over
the other channel. Any one of the inputs (analog RBG, 24-bit digital, 8-bit digital, YPbPr, composite video, etc) may be multiplexed to either channel. T
he PIP can be from any of the AIP (Analog Input Port) 1 or 2 or DIP (Digital Input Port) 1 or 2. Single PIP allows the PIP display to be placed arbitrarily
in the display window. It can be placed within the Main display, partially overlapped with Main display, or fully detached from Main display. Multiple PIP
s display allows a number of PIP windows to be displayed at the same time depending on display pixel resolution. The Main and one PIP window will
be running in real time. There are up to 16 PIP windows available at the same time, however only one might be active. All of them should be aligned to
the 4x4 grid. Default S/W application uses multiple PIP windows to display different RF channels.

• Two LVDS channels (A and B) are available on the output of the FLI8668 to transmit data and timing information to the display device. FLI8668 direct
ly drives the standard LVDS interface panels, supporting all standard data formats—single and dual bus, 18- or 24-bit data output. The 24-bit data may
be mapped as either standard receiver formats.

• The FLI8668 has a fully programmable, true color bitmapped OSD controller capable of displaying up to 16 “tiles” or bitmap windows on the display.
The individual tiles are programmable for location, size and bits per pixel, and have a precedence determining which tiles appear when overlapping oc
curs on the display. Tile data is stored in the external frame store memory by the OCM in either : 1, 2, 4, or 8-bit per pixel format. On-chip table registe
rs point to the start of tiles in external memory. A programmable on-chip 256x24-bit color lookup table is provided to map the OSD pixels onto a true 2
4-bit color space.

• The FLI8668 on-chip microcontroller (OCM) serves as the system microcontroller. It programs the FLI8668 and manages other devices in the system
such as the keypad and non-volatile RAM (NVRAM) using general-purpose input/output (GPIO) pins. The OCM can address a 22-bit address space to
utilize 4 MB external ROM.

Great Company Great People -12/53- Blue Ocean P³ Innovation


H3 High Power

A C

Great Company Great People -13/53- Blue Ocean P³ Innovation


H3 High Power - A

Power Sequence :
1 1. Power Cord connect to set. Power b/d supplies 5VST
CON from wafer P1000 pin 3 and 8. This is also distri
buted as +5VST_CORTEZ, that connect to Regulator
4 IC1001, IC1004, and IC1005, which regulate 1.8, 2.5,
and 3.3V for Cortez (turns ON). Also distributed as +
5VST, that connect to Transistors Q1000,1001,1004,
and 1005.
2. AC_DET signal are sent by Power b/d from pin 1 waf
er P1000 to pin N23 of IC800(Cortez). Then Cortez s
end 3.3V_ON from pin M2 to Power b/d via pin 13 P1
000.
AC_DET 3. IC800 send RL_ON from pin U24, this switches the tr
RL_ON
+5VST ansistor Q1004 ON so +5VST grounded, this makes t
he transistor Q1000 OFF, so other +5VST supplies R
L_ON on pin 2 wafer P1000. So Relay on Power b/d t
urns on to supplies 3.4, 6, 12, and 19V.(section 2)
4. 5VDet is sent by Power b/d to Cortez. Then Cortez s
end command to turn on VaVs from pin U25 that swit
ches ON transistor Q1005, so +5VST grounded, this
makes transistor Q1001 OFF, and this make another
+5VST supplies to pin 5 wafer P1000. The Power b/
d supplies X b/d and Y b/d.

Great Company Great People -14/53- Blue Ocean P³ Innovation


H3 High Power - B

3Và1.8V

5Và3.3V

Power Sequence :
1. The +5VST_Cortez as an input on pin 1 of IC1001(B
A033T), a LOW SATURATION VOLTAGE REGULATO
R, is being step-down to 3.3V. Then this output act
as input and enable for IC1003 pin 2 and pin 1 (SC15
65-1.8TR), a VERY LOW DROP OUT 1.5 Amp REGU
12Và9V LATOR WITH ENABLE, the output 1.8V is in pin
4, that is regulated to +1.8V_ADC_CTZ,+1.8V_CORE
_CTZ, +1.8V_DLL_CTZ, and +1.8V_PLL_CTZ.
2. The P_12 (from section 2), as an input on pin 1 of IC1
002 (KA7809R), a 3-TERMINAL 1A POSITIVE VOL
TAGE REGULATOR, regulated to be 9V output on pin
3, distributed as +9V_CXA2069, +9V_MSP4450, +9
V, and +9V_TK1184.
3. The VAVS_ON from Cortez switches ON transistor Q
1006, and makes +12V_panel grounded and supply pi
n1-4 IC1006(SI925DY), a DUAL P-CHANNEL LOGIC
LEVEL POWER TRENCH MOSFET, minimized ON s
tate resistance, and the output is on pin 5-8 a 12V_L
CD. The VAVS_ON also enable IC1007 pin 7, to s
tep-down an input +12V_PANEL on pin 2 into 5V_LC
D on pin 1 and 3.

Great Company Great People -15/53- Blue Ocean P³ Innovation


H3 High Power - C

5Và3.3V
5Và3.3V

Power Sequence :

1. The+5V_CORTEZ acts as input on pin 1 of IC1005(


BA033T) a LOW SATURATION VOLTAGE REGUL
ATOR, which step-down into 3.3V output on pin 3.
This outputs then is distributed as +3.3V_PLL_C
TZ, +3.3V_LBADC_CTZ, +3.3V_LVDS_CTZ, +
3.3V_LVDS_PLL_CTZ, and +3.3V_IO_CTZ.
The 3.3V output from IC1005 also acts as input on p
in 1 of IC1000 (MIC39100-2.5WS), a 2.5V/1A REGU
LATOR, step down the 3.3V into 2.5V output on pi
3.3Và2.5V n 3 as a +2.5V_DDR_CTZ.

2. The+5V_CORTEZ also acts as input on pin 1 of IC1


004(BA033T, a LOW SATURATION VOLTAGE REG
ULATOR, which step-down into 3.3V output on pin
3. This outputs then is distributed as +3.3V_ADDC1
_CTZ, and +3.3V_ADDC2_CTZ

Great Company Great People -16/53- Blue Ocean P³ Innovation


Trouble Shooting Guide
1. No power
◈ Symptom
1) Minute discharge doesn’t occur at module.
2) Front LED doesn’t come into action.

Start check

Is inserted a plug NO
Plug in a power cord
in power cord?

YES

Is connected the Line NO Connect a cable.


Filter and PSU? Plasma (EL11), LCD(SC100)

YES

Is normal the fuse of NO


PSU? Plasma(F101), Replace the fuse
LCD(F111)

YES

Is it connected that NO
PSU and 13pin cable Connect the 13pin cable.
in VSC board?
YES
After remove all cables connected to
PSU(except the CN101), authorizes the AC
voltage marking on manual.
When ST-by 5V doesn’t operate, replace PSU

Great Company Great People -17/53- Blue Ocean P³ Innovation


Trouble Shooting Guide
2. Protection mode
◈ Symptom
1) After once shining, it doesn’t discharge minutely from module.
2) The relay falls.( The sound is audible “ Click”)
3) It is converted with the color where the front LED is red from white.

Start check

Is the PSU NO Is output the normality Low/High


Replace the power board
normal? Voltage except Stand-by 5V?

YES
Is the each NO After connecting well each
connector normal? Replace the power board
connector the normality it operates?

YES

Is the Y- Board NO Is normal the fuse NO Is normal the output voltage after
(FS2,FS3) on Y-B/D? Replace Y-B/D
normal ? remove P1connector of Y-B/D?

YES YES Replace the fuse

Is the Z- Board NO Is normal the fuse NO Is normal the output voltage after
Replace Z-B/D
normal ? (FS1,FS2) on Z-B/D? remove P1 connector of Z-B/D?
YES
Replace the fuse
YES

After remove P100,110 output voltage normality:


NO Is normal the output voltage Replace Right X-B/D
Is the X- Board after remove P100,110,200, 210
normal ? After remove P200,210 output voltage normality:
connector of X-B/D? Replace Left X-B/D

Great Company Great People -18/53- Blue Ocean P³ Innovation


Trouble Shooting Guide
3. No Raster
◈ Symptom
1) No OSD and image occur at screen.
2) It maintains the condition where the front LED is white

Start check

Does minute NO Is the NO Is output the normality Low/High Replace


discharge at inverter/VaVs
Module? on? Voltage except Stand-by 5V? the power board

YES
YES Check the PDP/LCD Module

Is the link cable NO Reconnect the link cable


normal? in P803(Plasma)/P804(LCD)

YES

Is the IC800’s NO Replace the VSC


output normal?

Great Company Great People -19/53- Blue Ocean P³ Innovation


Trouble Shooting Guide
4. In case of becomes unusual display from RF mode(Main)

Is normal video output NO YES YES


Is the Tuner Cable Is normal the Input voltage ? Is normal the I2C communication ?
of the Tuner?
connected well? (Check Pin8, Pin6) (Check Pin5, Pin4)
(Check TU201_Pin14)

NO NO NO

YES
Check the power
Cable inserts well. Change the Tuner
( L1103)

A Is normal video output


of CXA2069Q? NO Is normal the Input voltage ? YES Is normal the I2C communication ?
(Check R324, In case of S-Video (Check L308) (Check R309, R310)
check R324, R328)

NO NO

YES Check the power


( Check L1004) Change the IC(IC300)

Is the LVDS Cable NO Cable inserts well


connected well?

YES

Change the IC(IC800)

Great Company Great People -20/53- Blue Ocean P³ Innovation


Trouble Shooting Guide
5. In the case of becomes unusual display from rear AV mode(main)

Is normal video input NO


of the A/V jack? Check the input source)
(Check R2101)

YES

Same as Block A

6. In the case of becomes unusual display from rear S-Video mode(main)

Is normal video input NO


of the A/V jack? Check the input source)
(Check R198, R199, R2100)

YES

Same as Block A

7. In the case of becomes unusual display from side AV mode(main)

Is normal video input NO


of the A/V jack? Check the input source)
(Check R343)

YES

Same as Block A

Great Company Great People -21/53- Blue Ocean P³ Innovation


Trouble Shooting Guide
8. In the case of becomes unusual display from side S-Video mode(main)

Is normal video input NO


of the A/V jack? Check the input source
(Check R339, R341, L310)

YES

Same as Block A

9. In the case of becomes unusual display from SCART 1 mode(main)

Is normal video input NO


of the A/V jack? Check the input source
(Check R102)

YES

Same as Block A

10. In the case of becomes unusual display from SCART 1_RGB mode(main)

Is normal video input NO


of the A/V jack? Check the input source
(Check L111, L112, L106)

YES

Same as Block A

Great Company Great People -22/53- Blue Ocean P³ Innovation


Trouble Shooting Guide
11. In the case of becomes unusual display from SCART 2 mode(main)

Is normal video input


of the A/V jack? NO
Check the input source
(Check R115)

YES

Same as Block A

12. In the case of becomes unusual display from SCART 2_YC mode(main)

Is normal video input


of the A/V jack?
NO Check the input source
(Check R115, R149)

YES

Same as Block A

Great Company Great People -23/53- Blue Ocean P³ Innovation


Trouble Shooting Guide
13. In case of becomes unusual display from RF mode(Sub)

Is normal video output NO YES YES Is normal the I2C communication ?


Is the Tuner Cable Is normal the Input voltage ?
of the Tuner?
connected well? (Check Pin8, Pin6) (Check Pin5, Pin4)
(Check TU200_Pin14)

NO NO NO

YES Check the power


Cable inserts well. Change the Tuner
( L1103)
B
Is normal video output
of CXA2069Q? YES YES
Is normal the Input voltage ? Is normal the I2C communication ?
(Check R312, In case of S-Video
(Check L308) (Check R309, R310)
check R312, R314)

NO NO

Check the power


YES Change the IC(IC300)
( Check L1004)

Is the LVDS Cable NO


Cable inserts well
connected well?

YES

Change the IC(IC800)

14. In case PIP doesn’t display from other modes(Sub)


▷ Same as the case of main except block A should be change to B

Great Company Great People -24/53- Blue Ocean P³ Innovation


Trouble Shooting Guide
15. In case of becomes unusual display from component1 mode(main/sub)

Is normal video input


of the JK102? NO Check the input source
(Check L126, L127, L128)

YES

Change IC(IC800)

16. In case of becomes unusual display from component 2 mode(main/sub)

Is normal video input NO


of the JK103? Check the input source
(Check L129, L130, L131)

YES

Change IC(IC800)

17. In case of becomes unusual display from RGB mode(main/sub)

Is normal R, G, B input
and H,V sync of the JK500? NO Check the input source
(Check R509, R511, R512
R513, R515)

YES

Change IC(IC800)

Great Company Great People -25/53- Blue Ocean P³ Innovation


Trouble Shooting Guide
18. No Sound

◈ Symptom
LED is White
Screen is existent, but sound isn’t
◈ Check follow

All input (mode) Is the speaker Set on speaker


is no sound? on in menu? in menu
NO NO
YES YES

Only HDMI is Is the speaker Check the


Download the EDID data
no Sound? cable normal? Speaker cable
NO NO
YES YES

Is the output
Only AV input is IC400 operate
of IC300(pin52,53) Replace IC300 Replace IC400
no Sound? normally?
NO normal? NO NO
YES YES

Check the signal


YES IC401 operate
after IC300 Replace IC401
normally?
refer to circuit diagram NO
YES

Only RF is IC402 operate


Check the Tuner In/Out Replace IC402
no Sound? normally?
NO NO
YES

Replace VSC B/D

Great Company Great People -26/53- Blue Ocean P³ Innovation


Trouble Shooting Guide
19. HDMI mode

Yes
Is normal only video ? Download EDID data each port.

1. Check TV input mode.


No
(HDMI1 port support HDMI and DVI.
Yes So if you input DVI signal and PC audio from phone jack,
Is normal only audio? You can hear PC audio. )
2. Unplug and plug HDMI cable.
No (sometimes ESD surge occurred at HDMI port.)
3. Check HDMI Mute register. (0x68, offset 0x37)
4. Check Audio-out channel mute register (0x68, offset 0x32)
Check TMDS line wave.
is appropriately enabled.
(R1215 ~ R1222/ R1226 ~ R1233)

No
Is wave continuous? Check HDMI source. Change another source or cable.

Yes

1. Check HDMI receiver’s status register. (0x60, offset 0x06)


- If the value is 0xf or 0x8, it is normal.

2. Check HDCP register. (0x60, offset 0x32)


- Enable bit 6: HDCP key loaded
- Enable bit 5: HDCP decryption active
- Enable bit 4: HDCP authen. attempted

Reset TMDS power down/on register. Normal video, No


Replace IC1200
- 0x60, offset 0x3f : 0xf7 => 0xff Normal audio?

Great Company Great People -27/53- Blue Ocean P³ Innovation


Gprobe5 Install & Download Guide

GProbe 5.2.0.2.exe

Install the GProbe Software from the Desktop using the GProbe 5.2.0.2.exe file.

Great Company Great People -28/53- Blue Ocean P³ Innovation


Gprobe5 Install & Download Guide

CGProbe Redistributable 5.2.0.4

After installing GProbe 5.2.0.2 install the CGProbe from CGProbe Redistributable 5.2.0.4.exe as
shown in the figure.

Great Company Great People -29/53- Blue Ocean P³ Innovation


Gprobe5 Install & Download Guide

GProbe 5

Select the Icon named GProbe 5 Tool for downloading the software in T.V. from the desktop.

Great Company Great People -30/53- Blue Ocean P³ Innovation


Gprobe5 Install & Download Guide

Help Menu

Verify the GProbe UI Version: 5.2.02 and CGProbe Version: 5.2.0.4 from the Help menu
under About GProbe.. .

Great Company Great People -31/53- Blue Ocean P³ Innovation


Gprobe5 Install & Download Guide

Connection Settings

Select Chip:

Choose the appropriate chip from Select Chip: FLI8638


Check Connection settings.

Great Company Great People -32/53- Blue Ocean P³ Innovation


Gprobe5 Install & Download Guide

Set the Connections as shown in figure:


Device: Serial
Protocols: SERIAL1
Scheme: Serial connection for all Genesis Chips

Great Company Great People -33/53- Blue Ocean P³ Innovation


Gprobe5 Install & Download Guide

Set the Connections as shown in figure:


Port: COM1 Data Bits: 8
Baud Rate: 115200 Parity: None
Stop Bits: 1

Great Company Great People -34/53- Blue Ocean P³ Innovation


Gprobe5 Install & Download Guide

Set the Connections as shown in figure:


Port: 0x378
Clock Frequency: 60000 Hz
Scheme: Standard Speed LPT1(0x378)

Great Company Great People -35/53- Blue Ocean P³ Innovation


Gprobe5 Install & Download Guide

Set the Connections as shown in figure:


I/p Pin: 15(active high) O/p Pin: 17(active high)
SDA Signal I/p Pin: 11(active high) SDA Signal O/p Pin: 9 (active high)
Scheme: Default Pin Assignments

Great Company Great People -36/53- Blue Ocean P³ Innovation


Gprobe5 Install & Download Guide

Set the Connections as shown in figure:


Scheme: Default USB Setting

Great Company Great People -37/53- Blue Ocean P³ Innovation


Gprobe5 Install & Download Guide

Set the Connections as shown in figure:


Short Timeout: 1000 ms Long Timeout: 15000 ms
Address: 4096 Size: 4096
Scheme: Default Setting

Great Company Great People -38/53- Blue Ocean P³ Innovation


Gprobe5 Install & Download Guide

Select the “Commands” Option and then select the “Batch” option to locate the Path from
where the “.text file” has to be downloaded which contains the information regarding the
location of final “.hex file”.

Great Company Great People -39/53- Blue Ocean P³ Innovation


Gprobe5 Install & Download Guide

browse

Browse the .txt file from its specified location in the directory such as:
C:\clearcase_rohit\rohit_view2\CC_HURRICANE3_H\10_Source\FLI8668\Isp\b
atch\CORTEZ_A.txt

Great Company Great People -40/53- Blue Ocean P³ Innovation


Gprobe5 Install & Download Guide

After selecting the Appropriate Batch file Check that the T.V is in GProbe Mode for
downloading the software other wise it generate an Error.
RS232 Host: Gprobe.
Baud Rate: 115200bps(T.V in Power on state)/9600bps (T.V in stand by Power off).

Great Company Great People -41/53- Blue Ocean P³ Innovation


Gprobe5 Install & Download Guide

After selecting the Appropriate Batch file Check that the T.V is in GProbe Mode for
downloading the software other wise it generate an Error.
Error: Timeout while waiting for Response.

Great Company Great People -42/53- Blue Ocean P³ Innovation


Gprobe5 Install & Download Guide

If the connections between T.V Board and C.P.U are not proper or T.V is not in the GProbe
mode it will give “Error Message” as shown in figure.
Error Message: Timeout while waiting for Response.
So Check the connection properly and GProbe condition & again Start Downloading.

Great Company Great People -43/53- Blue Ocean P³ Innovation


Gprobe5 Install & Download Guide

After Downloading complete its shows :


Execution time: XXX.XX second (~~Approx)
Batch: Command Successful.

Great Company Great People -44/53- Blue Ocean P³ Innovation


Gprobe5 Install & Download Guide

After Downloading complete its shows :


Execution time: XXX.XX second (~~Approx)
Batch: Command Successful.

Great Company Great People -45/53- Blue Ocean P³ Innovation


Gprobe5 Debugging

GPIO port debugging

appstest 0 input

appstest funtion help

Great Company Great People -46/53- Blue Ocean P³ Innovation


Gprobe5 Debugging

Register Bit Types

After value change,


Input 0xe000 = 0xff in command window
è Execute (Real value change)

After value change,


è Directly Real value change

PAA,CRW,CRO,RO,WO type è We could not change the register value using the Gprobe5

Great Company Great People -47/53- Blue Ocean P³ Innovation


Gprobe5 Debugging

IC control Example

EEPROM initialization (Except adjustment Data) appstest 1 0

EEPROM initialization (Include adjustment Data) appstest 1 99

EEPROM Specific address value : Byte read appstest 22 Addr


EEPROM
EEPROM Specific address : Byte write appstest 21 Addr Data

EEPROM Specific address value : Word read appstest 24 Addr

EEPROM Specific address : Word write appstest 23 Addr Data

HDMI initialization appstest 4

HDMI HDMI Specific register : value read appstest 75 SubAddr Addr

HDMI Specific register : value write appstest 76 SubAddr Addr Data

MSP initialization appstest 33

MSP MSP Specific register : value read appstest 32 Addr1 Addr2

MSP Specific register : value write appstest 31 Addr1 Addr2 Data

CXA2069 register : write appstest 60 Main Pip MonitorOut


CXA2069
CXA2069 Status : read appstest 61

Great Company Great People -48/53- Blue Ocean P³ Innovation


EDID data Download Guide.

1. Required Test Equipment

1) Adjusting PC with S/W for writing EDID Data.(S/W : EDID TESTER Ver.2.5)
2) A Jig for EDID Download
3) Cable : Serial(9Pin or USB) to D-sub 15Pin cable, D-sub 15Pin cable, DVI to HDMI cable.

2. Setting of the device

Connection Diagram of DDC download

Great Company Great People -49/53- Blue Ocean P³ Innovation


EDID data Download Guide.

3. Preparation for Adjustment

1) As above Fig. 5, Connect the Set, EDID Download Jig,, PC & Cable
2) Turn on the PC & EDID Download Jig. And Execute the S/W : EDID TESTER Ver.2.5
3) Set up the S/W option .

Repeat Number : 5
Device Address : A0
PageByte : 8

4) Power on the Set

Great Company Great People -50/53- Blue Ocean P³ Innovation


EDID data Download Guide.

4. Example Data of EDID(42PC1R-ZH)

1) 42PC1R-ZH DDC data of Analog-RGB (Check Sum : CE )

[BLOCK0]

2) 42PC1R-ZH DDC data of Digital_HDMI (Check Sum : 0B2B)

[BLOCK0] [BLOCK1]

Great Company Great People -51/53- Blue Ocean P³ Innovation


EDID data Download Guide.

5. Sequence of Adjustment

1) Init the data


2) Load the EDID data.( Open File : Analog ,Digital)
3) Push the “Write Data & Verify” button. And confirm “Yes”.
4) If the writing is finished, you will see the “ OK” message
5) It is important that PP62A/C has two HDMI
so digital DDC downloading must be performed two times(HDMI 1 , HDMI
2)

Great Company Great People -52/53- Blue Ocean P³ Innovation


Document

Owner’s
Manual Owner's manual Owner's manual
_ EU _ Non EU

Module
CAS 42X3_PDP 50X3_PDP 32LCD_LPL 37LCD_LPL 42LCD_LPL 37LCD_AUO

Circuit
Diagram Circuit Circuit Diagram Circuit Diagram Circuit Diagram
Diagram_VSC _ Local key _ PreAMP _ Side AV

Adjustment
UI
Specification Adj_UI
Specification

Area Option
Table LCD H3 High PDP H3 High
Option Table Option Table

Gprobe5
GProbe5.2.0.2 CGProbe5.2.0.4

Great Company Great People -53/53- Blue Ocean P³ Innovation

Das könnte Ihnen auch gefallen