Beruflich Dokumente
Kultur Dokumente
INSTITUTE OF TECHNOLOGY
Course title; Specification and quantity surveying Division: CoTM 3rd Year
Course No.: CoTM-3211
ECTS Credits: 5
Credit Hour: 3
Course Prerequisite; CoTM2072 Instructor: Anteneh Tibebu (MSc.)
Course Contents
1. Specifications
1.1. Introduction
1.2. Purposes of specifications
1.3. Types of Specifications
1.4. Specification writing
2. Technical Specification and Method of
Measurements for the diff. trade of Works
A. SUBSTRUCTURE
2.1. Excavation and earthworks
2.2. concrete works
2.3. Masonry Works
B. SUPERSTRUCTURE
2.4. Concrete works
2.5. Masonry works
2.6. Roofing and wall cladding
2.7. Carpentry and joinery works
2.8. STEEL STRUCTURAL WORK
2.9. Metal works
2.10. FINISHING WORK
2.11. GLAZING
2.12. PAINTING WORKS
2.13. SANITARY WORKS
2.14. ELECTRICAL INSTALLATION
3. Quantity surveying
3.1. Introduction
3.2. Measurement of construction
works taking off, preparing
specification and BoQ.
4. Cost Estimation
4.1. General
4.2. Purposes of Cost Estimation
4.3. Types of costing or estimating
5. Rate Analysis
5.1. Introduction
5.2. Material Breakdown
Continuous Assessment…… (60%)
Mode of assessment 40% projects
10% assignment
10% progress report
Final Exam ……………………………….(40%)
1. B.N. Dutta, “Estimating and
costing in civil
Engineering”
Literature 2. D.F. Turner, “Quantitiy
surveying practice and
Administration”
3. W.J. Hornung, “Estimating
Building Construction
Quantity surveying”
4. BatCoDA, “Technical
Specification and method of
measurement for
construction of buildings”