Committee Approval for Final Standard Specifications
TECHNICAL TERMS - CHAPTER 4 - ENGINEERING SPECIFICATIONS
E — Pipeline works Specifications
Specifications PS 01 - SERVICE CONNECTIONS MATERIALS & INSTALLATION
Item 15. GRP WALL MOUNTED WATERMETER BOXES
The attached documents are the final revised amended copy of the above mentioned
specifications under technical terms checked and signed by ‘Standards and Specification
Committee':-
NAME POSITION SIGNATURE
Engr. AREF BARHAMA Director of Asset
Management Dept.
Engr. HISHAM MAHMOUD Acting Director of O&M
Dept.
Engr. OSAMI BAYOMI Chief Engineer ,West- A
Ajman
Engr. EMAN TAWFIQ Head of Standards &
Specification Division.
Engr. JAWAHER HAMAD ‘Standards & Specs.
Engineer
Engr. THOMAS VERGIS Head of Design Division
Eng. HAMRUDEEN BASHERILDIN | Design Engineer-
Mechanical
Engr. MERAJ MOHSIN KHAN. Design Engineer(CIVIL)
Endorsed By:
——
‘AREF A.BARHAMA
ACTING EXECUTIVE DIRECTOR OF WATER DIRECTORATE
Date: 5/2016
FEWA_WD_12_AM_PO7_12ze!
— oo
Federal Electricity & Water Authority
Water Directorate
Asset Management Department
STANDARD SPECIFICATIONS
FOR WATER WORKS
TECHNICAL TERMS
Chapter - 4
Engineering Specifications
E - Pipeline works Specifications
PS 01
SERVICE CONNECTIONS
MATERIALS & INSTALLATION
(dient FEDERAL ELECTRICITY AND WATER AUTHORITY (FEWA)
ppejest STANDARD SPECIFICATIONS FOR WATER WORKS.
~~
“NSE _Eroneer WATER DIRECTORATE - ASSET MANAGEMENT DEPARTMENT
|e” Technical Terms / Chapter 47 Engineering Speciicaions / Pipeline Works Spociicatione
WAM Pst SERVICE CONNECTIONS MATERIALS & NSTALLAION
[ies DUBAT [erser— [Dosimert: MWA PRO_OTWAMLO4-PSO1 [rv JUNEOTS wot 1 [ek
2SERVICE CONNECTIONS MATERIALS & INSTALLATION
15. GRP WALL MOUNTED WATERMETER BOXES
‘The water meter cabinet shall be of robust construction of GRP with a UV stabiliser gelcoat. The cabinet shall
have a lockable door .
‘The following features shall be available with the cabinet.
* Cabinet Body - high-class GRP, wall thickness should not be less than 3mm (Materials: Gel Cost, Resin,
Chopped Strand Mat, Peroxide, UV Inhibitor. The resin to be UV Stabilized),the body shall have closed
ccover in all sides and access from front side only.(no cut out at rear side)
+ Size 600 Height x 400 Width x 200 Depth. mm
+ The cabinet shall have hinged door in front with superior quality and 2 no, of square lock
* Hinges ~ Heavy duty lift off type stainless steel 316 grade, hinges have 180° door opening
* Finish: Smooth and plain semi gloss UV resistant gel coat finish to RAL 7036 or as approved by FEWA.
+ Text - FEWA Water Meter embossed in both Arabic and English or as approved by FEWA.No logo
required
‘+ The doors sealing should be provided with long life,bulb type suitable EPDM gaskel(high tempearture
resisitant) to prevent entrance of moisture and humidity
‘+ Suitable natural ventilating arrangement should be provided for proper heat disspation.(vent and drain
holes)
+ Pipe inlet and outlet holes (75 mm)shall be provided at bottom and at tob centre or side of cabinet ‘The
holes type shall be slotted or as approved by FEWA.
* Fire resistance-fire retardant,self extinguishing to BS476, part 7, class 2.
* Allard wares should be of stainless steel or fixing to wall expansion bolts of a minimum 10 mm shall be
supplied.
Note:
1. The water meter cabinet manufacturer should have ISO 9001/2000 or other approved
equivalent Quality Control Certificate.
2. The manufacturer should have reference of supply of at least 3 years in GCC region with
proven record.
3. One sample of cabinet with complete accessories and marking shall be submitted for
Authority review.
Engineer WATER DIRECTORATE - ASSET MANAGEMENT DEPARTMENT
[alent FEDERAL ELECTRICITY AND WATER AUTHORITY [FEWA), ae
lpwject STAI ‘SPECIFICATIONS FOR WATER WORKS
tile: “Technical Terms / Chapter 4/ Engineering Specifications / Pipaline Works Specifications:
WAM P01 SERVICE CONNECTIONS MATERIALS & NSTALLATON
fice: DUBAI Jerior [Document MWA_PRO_O7IWAW-04-PSOT [rer JUNEI@DI8 Iareot 2 [or 2