Beruflich Dokumente
Kultur Dokumente
30-32 Chegwyn St | BOTANY NSW 2019 | Tel: +612 9700 1222 | Fax: +612 9700 1771 |
Email: service@anotec.com.au | Website: http://www.anotec.com.au
Anotec – Looking after our Environment
The chemical constituents of Anotec® odour control formulations are highly active
organic compounds that include but are not limited to sugar derivatives and
peptides. Anotec’s unique blend of compounds forms complexes that effectively
absorb and treat offending odour molecules. Further, the Anotec® blend, when
applied, reduces the surface tension in the liquid phase and assists in the blocking
or inhibition of volatisation of malodours. The effectiveness of Anotec® Odour
Control formulations stems from the unique chemistry of synergized surfactants
and odour profiling technology, enabling efficient and immediate reduction in
chemical odour concentrations when compared to conventional odour abatement
technologies. The non-ionic surfactants in the product are readily biodegradable in
standard BOD tests and CO2 evolution procedures.
Neither slight branching nor increments in the length of the carbon chain appear to
exert a significant effect on the rate of degradation. Run-off can be disposed of via
normal wastewater channels. The proprietary additives for binding, enhancing
biodegradation and odour profiling – each of which is >2% - are all food grade
quality. The active ingredients in this product have boiling points in >1500C.
Anotec® is fully miscible in water and the product does not have a measurable
flash point. Application via a misting or fogging system ensures direct contact
between the Anotec odour control formulation and the malodorous emission. Upon
direct contact, odour analysis shows a significant reduction in chemical odour
concentrations for each component identified in any malodorous mix.*
Chemistry
Anotec Odour Control Formulations
are based on initial research into the
odour profile of the offending smell.
Once profiling is complete,
scientifically chosen blends of
surfactants are developed for use
via atomisation via manual spray
bottles, or for larger scale projects,
fixed or portable application
devices.
1. INTERCEPTION
Pumping Stations Application / Use: Anotec® formulations can be used via various
Sewage treatment fogging or atomising devices as per the suppliers
Lagoons / ponds recommendations. Suggested devices include
Site remediation the fogmaster®, high pressure hydraulic or air
Foundries assisted nozzle equipment.
Rubber manufacturing
Plastics Manufacturing Product Specification
Livestock
Poultry Colour: Clear / Milky-White Liquid
Many more Odour: Characteristic pine/eucalyptus blend
Specific Gravity (mmHg): 0.98 grams/L
Stability / Storage: 2 years (unopened)
0
Boiling Point: 100 C
Flammability: Not Flammable
Solubility in Water: 100%
Biodegrability: Completely
Abrasives: Nil
pH: 7.0
Ionic Nature: Non-ionic
Product Details / Data
Anotec Liquid Phase Odour
Control Solutions are effective Item Code for Ordering: 7100
for controlling or eliminating
odours from products that Description: Anotec® odour control solution is a
contain: Hyperconcentrate odour control formula
manufactured specifically for controlling and/or
Termiticide eliminating odours resulting from the use of
Dursban malodorous treatments, solutions or paints. This
Organophosphates product should be diluted prior to use (example
solvents 100-mls per 10 Litres of product). The
Hydrocarbons formulation is comprised of nature identical plant
Variety of paint oils, emulsifiers and non-ionic surfactant blend.
Bitumen
Many more Application / Use: Anotec® liquid phase formulations are applied as
an odour control additive to existing products
Ideal for: either by direct addition or mixing.