Beruflich Dokumente
Kultur Dokumente
TABLE OF COMMANDS
LIST (JOB) 3
LISTDIR (DSN) 3
LJCL (JOB) 3
LJES 3
LJOB (JOB / LIST) 3
LPRINT (SCAL / YEAR) 3
LPROS (JOB) 3
LPRRN (JOB / LIST / DATE) 3
LQ (JOB / SEQ / ST / LIST / SYS) 3
LRDYP (LIST) 3
LREQR (SEQ) 3
LRLOG (SPAN / SYS / DATE / JOB / LIST) 3
PF19 (LACT) 5
PF20 (XUPD) 5
PF21 (LISTDIR) 5
PF22 (LPDS) 5
PF23 (LSCHD) 5
PF24 (LSCHD) 5
REQUEUE (JOB / Q) 5
RUN (JOB) 5
RUNH (JOB) 5
XQM (JOB / Q) 5
/DISPLAY, PRINT=SCH
Use this command to obtain information about the values for schedule scan (SSCAN). The
PRINT=SCH parameter provides information about SSCAN such as the INCR, SPAN and
QDWELL intervals and the next run.
/DISPLAY, ST=JCL
Use this command to obtain information about the JCL libraries attached to CA-7. The ST=JCL
parameter provides information about the JCL libraries and their associated ID number.
/DISPLAY, ST=KEY
List of the 24 keys
JOB, Jobname
Lists the JOB screen
LACTR, SEQ=JOB
List all jobs in the active queue and any resources needed to run. LIST=Q parameter provides
information about job data only. LIST=RQMT parameter provides information about
requirement data only.
LISTDIR, DSN=*SCAL*
Use this command to obtain the complete list of all calendars known to CA-7.
LJCL, JOB=jobname
Use this command to review the JCL contained in the associated JCL library.
LJES
Also displays jobs actually running, last completed good step, started time, cpu & schid.
LPROS, JOB=jobname
Use this command to review the prose for a job.
LRDYP
Use this command to list jobs that are currently executing. LIST=STATUS parameter displays
job in the READY queue that require WLB resources to start.
LREQR, SEQ=JOB
Displays start times, average cpu times, average clock times & number of cart drives.
PF02 - XQJ
This is the command that allows actual ‘action’ entries to be typed appropriately.
PF03 - SAVE
PF07 - UP
PF08 - DOWN
PF13 - LIST
Will show all jobs that are currently in ABEND status in the REQUEST QUEUE.
RUNH, JOB=jobname
Use this command to execute a special run of a job so that requirements will not be posted,
and triggering will not occur. This command places a HOLD on the job, which must be posted.