Beruflich Dokumente
Kultur Dokumente
1 2 3 4 5
TC-7
ADSS
1700
20
M16
Note:
1.Holding Strength: 75% RTS of ADSS;
2.All ferrous parts are hot-dip galvanized;
3.All dimensions are in millimeters;
4. The diameter and tensile strength of ADSS:12.2mm, 15kN.
General Tolerance
Tension Clamp
5 Structural Reinforcing Rods ANN Al.-Clad Steel 1 <=30 ±1.5mm ANGLE:
for ADSS Span 600m
4 Dead-End Component ANW Al.-Clad Steel 1 >30 ±5% ± TYPE: AN-030-1220 中天
中天科技
3 Thimble Clevis TC-7 Galv.Cast Iron 1 70kN Max ±5mm
2 Extensive Link PH-7 Galv. Steel 1 70kN Drawing ANDY.Z 2012-12-19 Mass Scale NTS
Jiangsu Zhongtian
1 Shackle U-7 Galv. Steel 1 70kN Checked Z.L.XU 2012-12-19
Technology Co., Ltd. JSF-31942-1 REV A
Item Description Cat. No. Material QTY RFL Approved F.TAO 2012-12-19
20
M16
1
80
2
100
3 4 5 6
70
ADSS
1400
2000
Note:
1. Min. vertical failing load: 70kN;
2. Min Slip load:10%~20%RTS of ADSS;
3. All ferrous parts are hot-dip galvanized;
4. All dimensions are in millimeters;
5. The diameter and tensile strength of ADSS:12.2mm, 15kN.
Note:
1.The type of spiral vibration damper is according to the diameter of the cable;
2.The quantity of spiral vibration damper depends on the operation tensile force and
length of span,usually as follow:
Span Quantity
<100m 0
100-250m 2
250-400m 4
400-800m 6
General Tolerance
<=30 ±1.5mm ANGLE: Spiral Vibration Damper
>30 ±5% ± FLP-1220 中天
Max ±5mm 中天科技
Drawing ANDY.Z 2012-12-19 Mass Scale NTS
Jiangsu Zhongtian
Checked Z.L.XU 2012-12-19
Approved F.TAO 2012-12-19
Technology Co., Ltd. JSF-6032 REV A
1
4
10
340
5
458
6
Note:
1.Fiber bending additional attenuation:≤0.01dB; 9
8
2.Fiber bending radius:≥30mm;
3.Retaining fiber length:≥1.6m;
4.Environment temperature:- 40℃ ~+65℃;
5.All dimensions are in millimeters.
Ø206