Beruflich Dokumente
Kultur Dokumente
HYSOL® DK15-0463
Epoxy Coating Powder
Formerly Dexter
Description
®
Hysol DK15-0463 is an epoxy based coating powder developed for the insulation of low voltage bus
bars. It offers improved moisture resistance when compared to other DK15 series products. It also
provides smooth surface appearance with high edge coverage properties. DK15-0463 also carries UL
recognition for 130°C operating temperatures. Particle size distribution is tailored for application via a
fluid bed process.
Values are not intended for use in preparation of specifications. All measurements taken at 25°C (77°F)
unless otherwise noted.
Volume Resistivity,
@ 25°C ohm-cm 8.6 x 1016 ASTM D257
@ 100°C ohm-cm 1.6 x 1015
Dielectric Strength, 25 mil film, volts/mil 1130 ASTM D149
Arc Resistance, seconds 130 ASTM D495
Dielectric Constant, @ 25°C, 100Hz 3.9 ASTM D150
@ 100°C, 100Hz 4.0
Dissipation Factor, @ 25°C, 100Hz .006 ASTM D150
@ 100°C, 100Hz .020
Insulation Resistance @ 25°C 1.8 x 1014 ASTM D257
@ 100°C 2.0 x 1012
Powder Handling/Application Information DK15-0463
Powders should be stored at 50°F (10°C) or below in closed containers. Storage areas should be
designed to minimize moisture. After removing powder from cool storage, allow to equilibrate
with ambient temperature in closed containers before using to avoid moisture contamination.
02/00
For additional information in the Americas, please contact one of the following locations:
New York Canada Brazil
TEL: 716.372.6300 TEL: 905.814.6511 TEL: 011.55.11.4143.7000
FAX: 716.372.6864 FAX: 905.814.5391 FAX: 011.55.11.4143.7100
For a complete listing of worldwide locations and information on related products, please visit our website www.loctite.com/electronics
DISCLAIMER: The information supplied in this document is for guidance only and should not be construed as a warranty. All implied
warranties are expressly disclaimed. Including without limitation any warranty of merchantability and fitness for use: All users of the materials
are responsible for assuring that it is suitable for their needs, environment and use. All data is subject to change as Loctite deems appropriate.
Users should review the Material Safety Data Sheet (MSDS) and product label for the material to determine possible
health hazards, appropriate engineering controls and precautions to be observed in using the material. Copies of the
MSDS and label are available upon request