Beruflich Dokumente
Kultur Dokumente
Operating Instructions
0
Operating Instructions
Table of contents
1. Equipment safty
1
Operating Instructions
1. Equipment safety
2
Operating Instructions
Operator should make sure the equipment in the best work status and make
sure it cleanly and usable.
2. Description
DR MSC HL-□-□
Rated
Work ( KVAR )
capacity
High (voltage
voltage KV ) local
compensation
Mechanical switch on-off
Derun electric
Rated current:
3
Operating Instructions
under 35℃).
Protective levels:IP30
4
Operating Instructions
电缆进线孔? 152
DRMSCHG6.6-1500-1C DRMSCHG6.6-1500-2C
5
Operating Instructions
8 7
5. observe window
6. head lamp
7. nameplate
8. electromagnetic lock
1. Line channel
2. Junction port
3. Minitype breaker
4. Low voltage fuse
5. AC contactor
6. Relay
7. Time relay
8. Voltage relay
3.Installation、Operation、Run
3.1 Installation of equipment
(a) Open the wrapping box and check the integrality of all parts,
technique data,spare and store,according to the technique agreement;
(b) Installation the equipment comply the technique plan , put all
parts in order and weld the floor slotware;
(c) Installation the whole set device according the assemble diagram
and schematic diagram;
(d) Measure any two port of the whole set equipment, the maximum ratio
the minimum should not exceed 1.06;
7
Operating Instructions
3
4
8
Operating Instructions
(d) In power cut period and normal condition , it should cut the
superior breaker first and cut the other breakers , reverse the electrify
sequence when resume the power supply;
(e) In accident condition , it must cut off the capacitor superior
breaker;
(f) Power supply is forbidden when have not find the fault reason and
just instead the fuse,when the fuse was fused break;
(g) Capacitor must be discharged when examine and repair them,and it
should be grounded by the special grounding wire.