0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
44 Ansichten1 Seite
Your going to have to have a domain, an updated one with the current i.p active. (could be anything e.g. My sig) Now, your gonna have to download the Shoutcast Files. Go to START>PROGRAM FILES>EDIT SHOUTcast DNS CONFIG.
Your going to have to have a domain, an updated one with the current i.p active. (could be anything e.g. My sig) Now, your gonna have to download the Shoutcast Files. Go to START>PROGRAM FILES>EDIT SHOUTcast DNS CONFIG.
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als TXT, PDF, TXT herunterladen oder online auf Scribd lesen
Your going to have to have a domain, an updated one with the current i.p active. (could be anything e.g. My sig) Now, your gonna have to download the Shoutcast Files. Go to START>PROGRAM FILES>EDIT SHOUTcast DNS CONFIG.
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als TXT, PDF, TXT herunterladen oder online auf Scribd lesen
First, things First your speed has to be at least 256/64 kbps (which means Dial- up users, will have alot of latency, just dnt bother) Second, your going to have to have a domain, an updated one with the current i.p active. (Could be anything e.g. My sig) Now, Your gonna have to download the Shoutcast Files. Go to : www.shoutcast.com to get the files. Ok After downloading these, installing Both of them in any order i dnt care. Go to START>PROGRAM FILES>SHOUTcast DNAS>EDIT SHOUTCAST DNS CONFIG. Ok your gonna have to Configure it: Go Down and where it says password: change (that means your gonna have to change it to whatever, make sure u remember) The Portbase: change it to whatever port you want it Maxusers: (lets be realistic here, dnt put in 10000, like NXS's radio station) y our bandwidth has to be extremely good, if your cable, 50 user max is ok, ADSL s hould stay below 10 users, and T1 connections should do whatever tickles there f antasy. EDIT>SAVE. Open winamp, RIGHT CLICK>OPTIONS>PREFRENCES>DSP EFFECT> and choose the NULLSOFT SHOUTCAST. Go to OUTPUT, and then click on Connection, Through the ADDRESS, type your addre ss which you have done through Code: www.no-ip.com PORT NUMBER, whatever u did in the EDIT.txt, and your password. Then go to Encoder, and choose your quality of your music. Go back to OUTPUT>OUT PUT CONFIG> YELLOW PAGES. this is your advertisemant information. dow hatever yo u like there. Now Connect. to check that your Radio os on-line go to http:// (your address tha t you added in the prefrence)