Sie sind auf Seite 1von 5

T24E.

com
Miscs => Blogs => How to.. => Topic started by: beta on September 25, 2013, 06:30:08
PM

Title: How to create a lead company in T24 within 10 minutes?
Post by: beta on September 25, 2013, 06:30:08 PM

Purpose:
This blog is to demonstrate on how to create a new lead company in minutes.
(Usually created by those technical consultants who are in a hurry to catch a flight
:))  ) Please keep in mind that creating a new company in T24 requires good
amount of requirement gathering and whole lot of analysis in financial terms. This
blog should not be taken as a reference by those, you intend to create companies
in production environment. Well, yes you can take a gist of it though.

Prerequisites:
1.   T24 administration
2.   T24 COB
3.   Knowledge on the concept of company setup in T24

Pre­setup:
1.   Ensure no one is logged into T24 except you.
2.   Decide on the company ID
      The company ID is of the format <COUNTRYCODE><COMPANY.GROUP.ID>
<GEOGRAPHICAL.CODE>. For our example, we will use , BE0010001
3.   Decide on the company mnemonic which is a three letter word. Here, BE1
4.   Decide sub division code. This value should be unique for records in COMPANY
table. Fire the below query in the back end.

Code: [Select]
LIST F.COMPANY SUB.DIVISION.CODE ONLY

@ID........    SUB.DIVISION.CODE

  GB0010003                 0005
  SG0010001                 0003
  EU0010001                 0002
  GB0010001                 0001
  GB0010002                 0004
  GB0010004                 0006

From the above output, we can take the sub division code as 007 which makes
sense.(And cool too!)

5.   Choose an already existing company whose values can be used to default
values to the new company. Here, we take EU0010001 as the company from which
we can default most of the values to our new company.

Setup:
1.   Check if BATCH.NEW.COMPANY has records, IBLC.TODAY and
SYSTEM.END.OF.DAY4. In case these records are present, reverse them as these
are obsolete now.
2.   Using COMPANY.CREATE, input the new company record using ID BE0010001 as
shown below and verify it. 

Code: [Select]
Model Bank              create new company INPUT

    COMPANY........... BE0010001
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
  1. 1 GB COMPANY.NAME Belgium
  2. 1 NAME.ADDRESS... City of Brussels
  3 MNEMONIC.......... BE1
  4 FINANCIAL.COM..... BE‐001‐0001
  5 FINANCIAL.MNE.....
  6 SUB.DIVISION.CODE. 7
  7 CREATION.DATE.....
  8 DEFAULT.COMPANY... EU‐001‐0001
  9 RESERVED.8........
 10 RESERVED.7........
 11 RESERVED.6........
 12 RESERVED.5........
 13 RESERVED.4........
 14 RESERVED.3........
 15 RESERVED.2........
 16 RESERVED.1........
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

Field FINANCIAL.COM is important as the value to this field decides whether the
company is a lead company or a book. If the value in this field is the same as the
ID of the record, then it is a lead company. If it refers to ID of some other
company, this new company will be the book for the company referred to.

COMPANY.CREATE is a W type file which will trigger COMPANY application once
verified.

Code: [Select]
Model Bank              create new company INPUT

     COMPANY.CODE...... BE‐001‐0001
 ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
   1. 1 GB COMPANY.NAME Belgium
   2. 1 NAME.ADDRESS... City of Brussels
   3 MNEMONIC.......... BE1
   4 LANGUAGE.CODE..... 1
   5 STAT.REP.AREA.....
   6 STAT.REP.NAME.....
   7 STAT.REP.DELIV....
   8 MGMT.REP.AREA.....
   9 MGMT.REP.NAME.....
  10 MGMT.REP.DELIV....
  11 CONSOLIDATION.MARK N
  12 DEFAULT.NO.OF.AUTH 1
  13. 1 PGM.AUTOM.ID... ACCOUNT
  13. 2 PGM.AUTOM.ID... DX.CO.EXT.XFER.MANUAL
  13. 3 PGM.AUTOM.ID... DX.CO.XFER.MANUAL
  13. 4 PGM.AUTOM.ID... ST.GROUP.FIX
 ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

3.   Commit this record and you will find the below files being generated for the
new company.

[ 417 ] File ../bnk.data/FBE1.AA.A037 created , type = XMLORACLE
[ 417 ] File ../bnk.data/FBE1.AA.A038 created , type = XMLORACLE
[ 417 ] File ../bnk.data/FBE1.AA.A039 created , type = XMLORACLE
[ 417 ] File ../bnk.data/FBE1.AA.A040 created , type = XMLORACLE
[ 417 ] File ../bnk.data/FBE1.AA.A041 created , type = XMLORACLE
[ 417 ] File ../bnk.data/FBE1.AA.A042 created , type = XMLORACLE
[ 417 ] File ../bnk.data/FBE1.AA.A043 created , type = XMLORACLE
[ 417 ] File ../bnk.data/FBE1.AA.A044 created , type = XMLORACLE
[ 417 ] File ../bnk.data/FBE1.AA.A045 created , type = XMLORACLE
[ 417 ] File ../bnk.data/FBE1.AA.A046 created , type = XMLORACLE

.
.
 [ 417 ] File ../bnk.data/FBE1.AA.A133 created , type = XMLORACLE
[ 417 ] File ../bnk.data/FBE1.AA.A134 created , type = XMLORACLE
[ 417 ] File ../bnk.data/FBE1.AA.A135 created , type = XMLORACLE
[ 417 ] File ../bnk.data/FBE1.AA.A136 created , type = XMLORACLE
[ 417 ] File ../bnk.data/FBE1.AA.A137 created , type = XMLORACLE
[ 417 ] File ../bnk.data/FBE1.AA.A138 created , type = XMLORACLE
[ 417 ] File ../bnk.data/FBE1.AA.A139 created , type = XMLORACLE

This goes on for several minutes and you will be redirected to main screen once
done.

4.   At this level, the new company has already been created and ready for use to
login to and roam around. But alas! Who has access to the new company?
5.   Amend any user profile such that the new company code is reflected in
COMPANY.CODE.

Eg. 
Code: [Select]
5. 1 COMPANY.CODE... GB0010001 
5. 2 COMPANY.CODE... EU0010001 
5. 3 COMPANY.CODE... SG0010001 
5. 4 COMPANY.CODE... BE0010001 
5. 5 COMPANY.CODE... GB0010002 
5. 6 COMPANY.CODE... GB0010003 
5. 7 COMPANY.CODE... GB0010004

6.   Once this is done, you will have to use PASSWORD application to login to this
new company.
7.   Type PASSWORD in the main screen and choose option 2 to change company 

Code: [Select]
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
 SELECT ACTIVATION
 1 = CHANGE PASSWORD
 2 = CHANGE COMPANY
 3 = DEACTIVATE PROFILE

8.   Once prompted, type in BE0010001 to login to the new company.

Code: [Select]
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
 SELECT ACTIVATION
 1 = CHANGE PASSWORD
 2 = CHANGE COMPANY
 3 = DEACTIVATE PROFILE
 ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
 25 SEP 2013 13:36:18  USER (14 APR) SEAT.USER         [3694,49]
 ACTION BE0010001
 PLEASE KEY IN COMPANY CODE

9.   Now, you are into the new company.

Code: [Select]
Belgium                 SELECT APPLICATION

‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
25 SEP 2013 13:38:16  USER (14 APR) SEAT.USER         [3694,49]
ACTION
AWAITING APPLICATION

Post setup:
Post setup is unnecessary for those who want to create a  company just to login to.
Below are bare minimum activities to be done as part of post creation of a
company. There are quite a number of files to check on as per the manual but we
choose to ignore them as of now.
1.   Input and Authorise IHLD records in the below tables. In case you receive any
overrides while in input mode, accept them.

a.   DATES
b.   BATCH
c.   REVALUATION.PARAMETERIf you look at BATCH records, you will find that there
are around 260 records in IHLD. You may use EBS.AUTO.FUNCTION to input and
authorise the records unless you have all the patience in the world to input and
authorise the records one by one.

SMF 2.0.1 | SMF © 2011, Simple Machines
Enotify by CreateAForum.com
SMFAds for Free Forums | Powered by Advanced Topic Prefix Pro

Das könnte Ihnen auch gefallen