Beruflich Dokumente
Kultur Dokumente
TUTORIAL 1
STARTING GTSTRUDL
STARTING GTSTRUDL
This example shows how to enter GTSTRUDL and set the dimensional units.
1.- If you have a GTSTRUDL icon in the computer desktop just click on it, in order to
activate GTSTRUDL. Otherwise activate the “START” function and all Windows basic
options will be shown
The upper line includes the following three options: “New” shown above, and Existing
and “Recent” shown below.
The “New” is useful to start a new GTSTRUDL working session. The “Existing” options
is used to look for GTSTRUDL files, to select one to start a working session. The
“Recent” option is used to re-start a working session selecting from one of the previous
GTSTRUDL sessions.
Also offers
• Activate the “Model Wizard” and you will be guided in the construction of a
prototype structural model.
• Activate “GT-Menu” and you will go to the graphics facility for modeling and
display.
• Activate command mode, and you will go to the main GTSTRUDL window, where to
work with menus and/for commands.
6.- When the “GT-Menu” option is selected, in the upper window control goes directly to
the GT-MENU environment, opening the GT-Menu environment, as indicated in the
image shown below.
7.- The previous operation opens the GT-Menu environment, to create a new structural
model. As an initial step it is useful to set the dimensional units. In that respect, activate
the “Units” function and set every relevant unit as needed.
8.- You are now ready to begin the generation of a structural model, as indicated in any
of the GT-Menu tutorials available.