Beruflich Dokumente
Kultur Dokumente
Metallurgy Structure : The structure of low carbon steel-shot is a bainitic structure that is composed of ferrite and cementite
particles.
Hardness : The hardness of 90% of the tested shots is between 40-50 HRc.
Standart Packaging : In polyethylene and polypropylene bags of 25 kg, on stretched palettes tons.
CHEMICAL COMPOSITION (SAE –J2175)
S-780 S-660 S-550 S-460 S-390 S-330 S-280 S-230 S-170 S-110 S-70
SAE Mesh No Screen Opening
mm inc shot shot shot shot shot shot shot shot shot shot shot
7 2.83 0.111 All pass
8 2.38 0.0937 All pass
10 2.0 0.0787 85% min All pass All pass
12 1.68 0.0661 97% min 85% min 5% Max All pass
14 1.41 0.0555 97% min 85% min 5% max All pass
16 1.19 0.0469 97% min 85% min 5% max All pass
18 1.00 0.0394 96% min 85% min 5% max All pass
20 .84 0.0331 96% min 85% min 10% max All pass
25 .71 0.0280 96% min 85% min 10% max
30 .60 0.0232 96% min 96% min All pass
35 .50 0.0197 97% min 10% max
40 .42 0.0165 85% min All pass
45 .35 0.0138 97% min 10% max
50 .30 0.0117 80% min
80 .18 0.007 90% min 80% min
120 .12 0.0049 90% min
200 .07 0.0029
CHARACTERISTICS REQUIRED TEST METHOD
Degree of Size Shown in the table. ISO 11125-2
Metallic corrosives sometimes might contain drawing errors or cavities and this faulty measurement might be misleading in
Hardness ISO 11125-3
hardness determining.
Visible Density minumum 7*10 Kg/ m3 ISO 11125-4
Errors : ISO 11125-5
Particle Shape Maximum 15% shape defeat
Cavity Max %15
Drawing Error Max %5
Crack Must not exist
Total Error Max %20
Foreign Materials It can be maximum 1% ISO 11125-6
Max %2 Max %2 Low Carbon corrosives should be stored in environments without humid. Otherwise, problems appear
Humidity ISO 11125-7
during using.
Structure As structure, bainitic and martensitic structure has been accepted as the standard. ISO 11125-5
These errors stated above should not be found in more than 15% of the tested sample.
Chemical Composition Carbon %0.08-0.20 ISO 9556
Manganese %0.35-1.50 ISO 629
Silicon %0.10-2.00 ISO 439
Sulfur Max %0.05 ISO 4935
Phosphorus Max %0.05 ISO 10714