Beruflich Dokumente
Kultur Dokumente
• Board
• FAQ
• Register
• Login
is it possible yet since publishing the manual to allow printing from apple to printer
GhostWorks
Crystal Warrior
Posts: 101
Joined: Thu Sep 20, 2007 6:30 am
Location: Isle of Man
• YIM
Top
http://forum.qnap.com/viewtopic.php?f=182&t=1232&p=140947&hilit=osx+printer 1/26/2011
QNAP NAS Community Forum • View topic - OS apple to use print server as well as xp Page 2 of 9
parkensis
Cadet
Posts: 4
Joined: Sat Nov 10, 2007 7:56 pm
Top
I've tried this with QNAP 209Pro, OS X 10.4 and HP LaserJet 3050, without success: closest so far
has been with IIP protocol and plain NAS address as the printer address: OSX tries to send the job to
NAS but fails with "Network host 'v.x.y.z' is busy; will retry in 30 seconds...". So I guess it's not just
supported at the moment.
But I would really like to see this supported. Any plans for this QNAP ?
-julle
jullejuntunen
Cadet
Posts: 2
Joined: Mon Nov 19, 2007 12:06 am
Top
Have you tried clicking "More printers" and going for a windows printer. You should pick up the
printer shared here - assuming the workgroup is set to NAS (default). Most USB printers need the
correct driver, so make sure the printer model is correct and not "Generic". If the share doesn't appear
here then maybe go back over your settings on the NAS.
jens
Cadet
Posts: 9
Joined: Sat Dec 08, 2007 4:35 pm
Top
I went through a lot of trial and error, so not sure what actually was important, but here´s what I
think did the trick
http://forum.qnap.com/viewtopic.php?f=182&t=1232&p=140947&hilit=osx+printer 1/26/2011
QNAP NAS Community Forum • View topic - OS apple to use print server as well as xp Page 3 of 9
http://docs.info.apple.com/article.html?artnum=301397
The trick is to hold option key while pressing "more printers" in add printers -dialog. This enables
"advanced" option under top drop-down menu (the one with AppleTalk/Bluetooth/SMB options).
In the advanced dialog I selected "Windows printer (SAMBA). As URI I used
smb://user:password@server/sharename
Where user:password was my new "printer" user, server is my NAS IP address and sharename was
"NAS". As printer type I just used "General".
Then in following dialogs the share and printer names were shown automatically and I just clicked
them through and got the printer finally connected. Btw. looks that QNAP automatically names
printer by addind suffix "PR" to QNAP host name.
cheers
julle
jullejuntunen
Cadet
Posts: 2
Joined: Mon Nov 19, 2007 12:06 am
Top
Thanks julle!
I was having trouble printing to my HP PSC 1205 when connected to my QNAP TS-109 and this tip
helped me out.
I also installed the HPIJS printer drivers so that my printer type appeared. Don't worry about the fact
that the downloads are labelled PPC rather than Intel or Universal -- they work fine both on my
MacBook running Leopard and my iBook running Panther.
I also found that using the CUPS administration pages on http://localhost:631 were sometimes easier
than the default Windows printer setup on Leopard.
adamcr
Cadet
http://forum.qnap.com/viewtopic.php?f=182&t=1232&p=140947&hilit=osx+printer 1/26/2011
QNAP NAS Community Forum • View topic - OS apple to use print server as well as xp Page 4 of 9
Posts: 4
Joined: Mon Dec 31, 2007 8:04 pm
• Website
Top
I have now got a QNAP TS-109 myself & Macbook (intel) & xp so will test first at my place before
sorting out the issue for the client with wife with macbook and him with Windows XP trying to print ,
if there is anything i need more two know on this issue it would be grateful
GhostWorks
Crystal Warrior
Posts: 101
Joined: Thu Sep 20, 2007 6:30 am
Location: Isle of Man
• YIM
Top
Re:
by JDH » Sat Jul 12, 2008 4:16 pm
http://forum.qnap.com/viewtopic.php?f=182&t=1232&p=140947&hilit=osx+printer 1/26/2011
QNAP NAS Community Forum • View topic - OS apple to use print server as well as xp Page 5 of 9
adamcr wrote:I also found that using the CUPS administration pages on
http://localhost:631 were sometimes easier than the default Windows printer setup on
Leopard.
@adamcr
Could you elaborate the detailed steps in using CUPS please as I have no idea on what should I enter
for some of the settings. Thanks.
JDH
NAS Model: TS239 Pro & TS209 Pro
FW Ver: 3.4 / 3.3.0
OS: Mac Leopard (English) / WinXP
No. of HDDs: 2
HDD Model: WD RE3 Never Seagate Again
HDD Capacity: 1TB / 500GB
RAID Config: RAID 1
Services enabled: DDNS, Web Server, iTunes, Joomla! 1.5.8
Ext. Devices: USB Printer (HP Laser Jet 1320)
NAS Speed/MTU: 100Mbps/1500 Bytes
JDH
Crystal Warrior
Posts: 253
Joined: Sun Dec 30, 2007 4:55 pm
NAS Model: TS-239 Pro
Top
Has anyone gotten this to work with inkjet? Ive got a canon pro9000 and would LOVE to get this to
work, so far no luck...
techdef
Cadet
Posts: 44
Joined: Fri Dec 07, 2007 11:32 am
Top
http://forum.qnap.com/viewtopic.php?f=182&t=1232&p=140947&hilit=osx+printer 1/26/2011
QNAP NAS Community Forum • View topic - OS apple to use print server as well as xp Page 6 of 9
The trick is to hold option key while pressing "more printers" in add printers -dialog. This
enables "advanced" option under top drop-down menu (the one with
AppleTalk/Bluetooth/SMB options).
In the advanced dialog I selected "Windows printer (SAMBA). As URI I used
smb://user:password@server/sharename
Where user:password was my new "printer" user, server is my NAS IP address and
sharename was "NAS". As printer type I just used "General".
Then in following dialogs the share and printer names were shown automatically and I
just clicked them through and got the printer finally connected. Btw. looks that QNAP
automatically names printer by addind suffix "PR" to QNAP host name.
cheers
i really dont understand why you type NAS as share name? shouldent it be qusb?
its clear that the NAS knows the name of my printer, but i really cant get OS X to use it and print...
at this point im extremey desperate...i really cant see what im doing wrong
Havalina
Cadet
Posts: 25
Joined: Sun Oct 19, 2008 8:27 am
NAS Model: TS-109/209
Top
i followed jullejuntunens description and it was successful. u can find the "share"-name of your
printer in your qnap web-interface under "external devices"/"usbprinter".
in my case it was not even necessary to add login/password to the URL. The printer asked me for this
on the first print and i could save it in keychain.
cheers,
bendsch
bendsch
Cadet
http://forum.qnap.com/viewtopic.php?f=182&t=1232&p=140947&hilit=osx+printer 1/26/2011
QNAP NAS Community Forum • View topic - OS apple to use print server as well as xp Page 7 of 9
Posts: 11
Joined: Fri Oct 23, 2009 3:20 am
NAS Model: TS-109/209 Pro II
Top
Apple Developer Connection If you are running a different version of Mac OS X,display connec-tions
connections tions may continue to use the print context. with the X print server (i.e. fonts containing
glyphs) as well as any The xp-listfonts-modes xp-listfontsmodes modes attribute is provided so
Thanks
shanm
Cadet
Posts: 2
Joined: Mon Nov 30, 2009 2:59 am
NAS Model: TS-639 Pro
Top
Specific to Lexmark X215 but the steps are the same. It would be a matter of doing the same thing but
substitute your printer model in. If you can't find your printer model in OSX Google it for support in
OSX which is what I did to find this article.
Also make sure the user account you are using to print with has an account on the NAS.
http://forum.qnap.com/viewtopic.php?f=182&t=1232&p=140947&hilit=osx+printer 1/26/2011
QNAP NAS Community Forum • View topic - OS apple to use print server as well as xp Page 8 of 9
Willo
Cadet
Posts: 67
Joined: Sun Oct 19, 2008 8:51 am
NAS Model: TS-109/209 Pro
Top
hey
i also tried it
so thanks
_____________---
"Want to get-on Google's first page and loads of traffic to your website?
Hire a SEO Specialist from Ocean Groups seo pecialist"
grace01
Cadet
Posts: 2
Joined: Tue Aug 10, 2010 12:33 pm
NAS Model: TS-100
Top
anyone willing to walk me threw this? i have HP laserjet and 119P and can't get it to work for the life
of me...
QNAP SS-439 PRO with (4) 7200 WD BLACK 320GB in Raid 5
FreedomPirate01
Cadet
http://forum.qnap.com/viewtopic.php?f=182&t=1232&p=140947&hilit=osx+printer 1/26/2011
QNAP NAS Community Forum • View topic - OS apple to use print server as well as xp Page 9 of 9
Posts: 23
Joined: Sat Oct 10, 2009 9:21 am
Location: NY
NAS Model: SS-439 Pro
Top
Display posts from previous: All posts Sort by Post time Ascending Go
Post a reply
15 posts • Page 1 of 1
Jump to:
Hardware & Software Compatibility
Go
Who is online
Users browsing this forum: No registered users and 6 guests
• Home
• The team • Delete all board cookies • All times are UTC + 8 hours
• News
• Site map
• SitemapIndex
• RSS Feed
• Channel list
http://forum.qnap.com/viewtopic.php?f=182&t=1232&p=140947&hilit=osx+printer 1/26/2011