Beruflich Dokumente
Kultur Dokumente
Fesler Billet makes every effort to ensure that you are provided with the most
accurate and up-to-date technical information. However, all technical
information is approximate and may vary upon application. Fesler Billet is not
responsible for any consequences resulting from manufacture’s technical mid-
year changes. Fesler Billet products should only be installed by a qualified,
licensed auto mechanic experienced in the installation of such products.
Fesler Billet designs all parts off original OEM applications. Due to the vast INSTALLATION
array of manufacturers for aftermarket parts, it is possible that you may have to
make some minor adjustments to either our part or your sheet metal in order
for the part to fit properly.
INSTRUCTIONS
FBTHG-68Charger
QUESTIONS OR COMMENTS? 1968 – 1970 Dodge Charger
Call us at 1-866-583-9787
INSTALLATION INSTRUCTIONS
1968-1970 Dodge Charger Trunk Hinges
Copyright 2011 © by Fesler Productions, LLC. All rights reserved.
REMOVING YOUR OLD HINGES 12. Use an awl to transfer the location of the new holes to the body.
1. Remove four bolts retaining trunk lid and remove trunk lid
2. Remove trunk hinge springs.
3. Remove the retainer holding the trunk hinge in place (side cutters, pliers or a 13. Slide a deep socket or a spacer over a 1/8” drill
flat screwdriver will work) bit and drill pilot holes through the marks. Be
4. Remove the stock hinges careful not to hit the rear window with the drill
5. Install the new hinges in place of stock ones. Ball stuff will face center of car.
bit.
6. Install the new retainers. You can use a socket to drive the retainer on.
7. Remove the rear interior window trim and rear package tray.
10. From that center mark, measure out 16 ½” 17. Install struts with cylinder body towards the
and make another mark. Do this on both sides
of the center mark. Once you have made front of the car.
marks, place a piece of tape just on the
outside of each new mark. 18. Reinstall the trunk lid using four 5/16-18 x ¾ button head bolts and Fesler billet
washers.