Sie sind auf Seite 1von 61

SuperNova

n = 1750 1/min

H H
[m] [ft]

Q [m³/h]

n = 3500 1/min

H H
[m] [ft]

Q [m³/h]

PUMPENTECHNIK 07/2001
122.65502.51.01 PUMP TECHNOLOGY 07/2001
SuperNova

Baureihe
series

Spiralgehäusepumpe in Prozessbauweise
nach EN 733 / DIN 24255
ZLND End suction pump, process type
according to EN 733 / DIN 24255

Betriebsbereich

Der zulässige Betriebsbereich von Pumpen ist von verschiedenen Faktoren wie Art der Flüssigkeit,
NPSH, Dauer des Betriebes, Baugröße der Pumpe (Schnelläufigkeit) etc. abhängig.

Der empfohlene Bereich zur Auswahl von Pumpen ist in der folgenden Liste dargestellt.

Ein Betrieb außerhalb dieser Grenzen ist für viele Baugrößen ebenfalls möglich, bedarf aber der
Rückfrage bei Sterling SIHI.

Operating Range

The allowable operating range for pumps depends on different parameters like type of the liquid,
NPSH, duration of operation, size of pump (specific speed) etc.

Recommended selection range for pumps is given in the following table.

Operation outside these limits is also possible for many sizes, but needs consultancy by Sterling Fluid
Systems.

Bitte beachten:
Please observe:

1) Kennlinien gültig für Pumpen mit geschlossenem Laufrad


Curves are valid for pumps with closed impeller
2) Garantiewerte nach ISO 9906, Anhang A
Guarantee values according to ISO 9906, annex A
2) Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Magnetkupplungspumpen
Power consumption does not include Eddy Current losses for magnetic drive pumps
3) NPSHR - NPSH-Werte wurden im geschlossenem Kreislauf mit entgastem Wasser ermittelt. Die in den Kennlinien angegebenen
NPSH-Werte sind Messwerte, die einem Förderhöhenabfall von 3% entsprechen. Sicherheitszuschlag von mindestens 0,5 m
erforderlich
NPSHR - NPSH-values are measured with degased water in a closed circuit. The NPSH-values given in the performance curve
sheets are measured values which correspond to a loss of discharge head of 3%. Margin of minimum 0,5 m should be added.

2 122.65502.51.01
SuperNova

Baugröße Qmin Qmax Baugröße Qmin Qmax


/ Size Faktor / Faktor / / Size Faktor / Faktor /
Factor Factor Factor Factor
ZLND 32-125 0,3 1,2 ZLND 250-300 0,5 1,2
ZLND 32-160A 0,3 1,2 ZLND 250-315 0,5 1,2
ZLND 32-160B 0,3 1,2 ZLND 250--400 0,5 1,2
ZLND 32-200A 0,3 1,2 ZLND 250500 0,5 1,1
ZLND 32-200B 0,3 1,2 ZLND 300-400 0,5 1,2
ZLND 32-250 0,3 1,1 ZLND 300-500 0,5 1,1
ZLND 40-125 0,3 1,2
ZLND 40-160 0,3 1,2
ZLND 40-200 0,3 1,2
ZLND 40-250 0,3 1,1 Die empfohlenen Grenzwerte für die Auslegung
ZLND 40-315 0,3 1,1 werden wie folgt berechnet:
Qmin und Qmax Faktoren aus vorstehender
ZLND 50-125 0,3 1,2 Tabelle
ZLND 50-160 0,3 1,2 QOptimum(Volumenstrom, bei dem die Pumpe
ZLND 50-200 0,3 1,1 ihren besten Wirkungsgrad erreicht) aus der
ZLND 50-250 0,3 1,2 Einzelkennlinie
ZLND 50-315 0,3 1,2 Qmin Auslegung = Qmin Faktor x QOptimum
ZLND 65-125 0,3 1,2 Qmax Auslegung = Qmax Faktor x QOptimum
ZLND 65-160 0,3 1,2
Beispiel:
ZLND 65-200 0,3 1,2
Baugröße: ZLND 32-125
ZLND 65-250 0,3 1,1 Qmin = 0,3 x 9,6 = 2,9 m3/h.
ZLND 65-315 0,3 1,2 Qmax = 1,2 x 9,6 = 11,5 m3/h.
ZLND 80-160 0,3 1,2
ZLND 80-200 0,3 1,2
To calculate Qmin and Qmax, the following
ZLND 80-250 0,3 1,2 process will be follow:
ZLND 80-315 0,3 1,2 Qmin or Qmax = Factor from table x Qoptimun
ZLND 80-400 0,3 1,2 from curve
Example:
ZLND 100-160 0,5 1,2 Pump size: ZLND 32-125
ZLND 100-200 0,5 1,2 Qmin = 0,3 x 9,6 = 2,9 m3/h.
ZLND 100-250 0,5 1,1 Qmax = 1,2 x 9,6 = 11,5 m3/h.
ZLND 100-315 0,3 1,2
ZLND 100-400 0,3 1,2
ZLND 125-200 0,5 1,2
ZLND 125-250 0,5 1,2
ZLND 125-315 0,3 1,2
ZLND 125-400 0,3 1,2
ZLND 150-200 0,5 1,1
ZLND 150-250 0,3 1,1
ZLND 150-315 0,3 1,2
ZLND 150-400 0,3 1,2
ZLND 150-500 0,3 1,2
ZLND 200-250 0,7 1,2
ZLND 200-315 0,7 1,2
ZLND 200-400 0,7 1,2
ZLND 200-500 0,5 1,2

122.65501.51.01 2 bis
Nenndrehzahl / nominal speed
SIHISuperNova 32-125
1750 min-1
Baureihe / series ZLND

11

10 ∅ 140
40% 50% 55%
59%
62%
9 64%
∅ 130
8 62%

H 7 59%
∅ 120
55%
[m] 6
∅ 110

5
∅ 100
4

1
0 2 4 6 8 10 12 14

0,5

0,4 ∅ 140

P
0,3 ∅ 130
[kW]
0,2 ∅ 120

∅ 110
0,1 ∅ 100

0,0
0 2 4 6 8 10 12 14

3
NPSHR
2
∅ 140-100
[m] 1
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 3
Nenndrehzahl / nominal speed
SIHISuperNova 32-160A
1750 min-1
Baureihe / series ZLND

20

18
∅ 175 35% 42% 48% 52% 55%
57%
16 ∅168 58%
57%
14 ∅ 160 55%
52%

H 12 ∅ 150

∅ 140
[m] 10 48%
∅ 130
8

0
0 2 4 6 8 10 12 14

0,8
∅ 175

∅168
0,6
∅ 160
P
∅ 150
0,4
[kW] ∅ 140

∅ 130
0,2

0,0
0 2 4 6 8 10 12 14

2
NPSHR
∅ 130 - 175
1
[m]
0
0 2 4 6 8 10 12 14
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
4 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 32-160B
1750 min-1
Baureihe / series ZLND

18
∅ 175
40% 48% 54%
16 58%
61%
∅ 168 63%
14 64%
∅ 160
63%
12 ∅ 150 61%

H 58%
10 ∅ 140
54%
[m] ∅ 130
8

0
0 2 4 6 8 10 12 14 16 18 20 22 24

1,2
∅ 175
1,0
∅ 168
P 0,8 ∅ 160

0,6 ∅ 150
[kW]
∅ 140
0,4 ∅ 130

0,2

0,0
0 2 4 6 8 10 12 14 16 18 20 22 24

2
NPSHR ∅ 130 - 175
1
[m]
0
0 2 4 6 8 10 12 14 16 18 20 22 24
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 5
Nenndrehzahl / nominal speed
SIHISuperNova 32-200A
1750 min-1
Baureihe / series ZLND

26
∅ 214 30% 35% 40% 44% 47%
24 49%
∅ 207 50%
22 49%
∅ 200
20 47%
∅190
44%
18
H ∅ 180
16
[m] ∅ 170 40%
14

12

10

4
0 2 4 6 8 10 12 14

1,4
∅ 214
1,2 ∅ 207

1,0 ∅ 200
P ∅190
0,8
∅ 180
[kW] 0,6 ∅ 170

0,4
0,2
0,0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14

1,5
NPSHR ∅ 170 - 217
1,0
[m] 0,5
0,0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
6 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 32-200B
1750 min-1
Baureihe / series ZLND

26
∅ 214 43% 49%
54% 58%
24 61%
∅ 207 63%
64%
22 ∅ 200
63%
20 61%
∅190

H 18
∅ 180 58%

[m] 16
∅ 170
14 54%

12

10

6
0 2 4 6 8 10 12 14 16 18 20 22 24

2,0
∅ 214
∅ 207
1,5 ∅ 200
P ∅190

1,0 ∅ 180
[kW]
∅ 170

0,5

0,0
0 2 4 6 8 10 12 14 16 18 20 22 24

2,0
NPSHR 1,5
1,0 ∅ 170 - 217
[m] 0,5
0,0
0 2 4 6 8 10 12 14 16 18 20 22 24
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 7
Nenndrehzahl / nominal speed
SIHISuperNova 32-250
1750 min-1
Baureihe / series ZLND

34
∅ 255 20% 25% 30%
32 35%

37%
30 ∅ 245

28 38%
∅ 235
26
H 37%
24 ∅ 225

[m] 22 35%
∅ 215
20
30%
18

16

14

12

10
0 2 4 6 8 10 12 14 16

2,4
∅ 255

∅ 245
P 2,0
∅ 235

[kW] ∅ 225
1,6 ∅ 215

1,2

0,8
0 2 4 6 8 10 12 14 16

4
NPSHR 3
2
[m] ∅ 215- 255
1
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
8 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 40-125
1750 min-1
Baureihe / series ZLND

10 ∅ 140 50% 60%


66% 70%
72%
9 73%

∅ 130 72%
8
70%

7 ∅ 120
66%

H 60%
6
∅ 110
[m] 5
∅ 100

0
0 2 4 6 8 10 12 14 16 18 20 22 24

0,6
∅ 140

0,5

0,4 ∅ 130
P

0,3 ∅ 120
[kW]
∅ 110
0,2
∅ 100
0,1

0,0
0 2 4 6 8 10 12 14 16 18 20 22 24

4
NPSHR 3
2 ∅ 100 - 140
[m] 1
0
0 2 4 6 8 10 12 14 16 18 20 22 24
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 9
Nenndrehzahl / nominal speed
SIHISuperNova 40-160
1750 min-1
Baureihe / series ZLND

18
∅ 175 55% 60%
65%
69%
16 72%
∅168 74%

75%
14 ∅ 160
74%
72%
∅ 150 69%
12
H
∅ 140
[m] 10
∅ 130

2
0 5 10 15 20 25 30 35 40 45

2,0
∅ 175

1,5 ∅168
P ∅ 160

1,0 ∅ 150
[kW]
∅ 140
∅ 130
0,5

0,0
0 5 10 15 20 25 30 35 40 45

2,5
NPSHR 2,0
∅ 130 - 175
1,5
[m] 1,0
0,5
0,0
0 5 10 15 20 25 30 35 40 45
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
10 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 40-200
1750 min-1
Baureihe / series ZLND

30

∅ 214 50% 58% 63% 67%


70% 72%
25
∅ 207 73%
72%
∅ 200 70%
67%
20 ∅190
H
∅ 180
[m]
∅ 170
15 63%

10

5
0 5 10 15 20 25 30 35 40 45

4
∅ 214
3
∅ 207
3 ∅ 200
P
∅190
2
∅ 180
[kW] 2
∅ 170
1
1
0
0 5 10 15 20 25 30 35 40 45

2,5
NPSHR 2,0
∅ 170 - 214
1,5
[m] 1,0
0,5
0,0
0 5 10 15 20 25 30 35 40 45
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 11
Nenndrehzahl / nominal speed
SIHISuperNova 40-250
1750 min-1
Baureihe / series ZLND

35
∅ 255
40% 46%
51%
55%
∅ 245
57%
30
58%
∅ 235

57%
∅ 225
H 25
∅ 215
[m] 55%

20

15

10
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28

4
∅ 255

∅ 245
P 3
∅ 235

[kW] ∅ 225

2 ∅ 215

1
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28

4
NPSHR 3
∅ 215 - 255
2
[m]
1
0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
12 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 40-315
1750 min-1
Baureihe / series ZLND

∅ 325 30% 34%


38%
41%
43%
50 ∅ 315

44%
∅ 305

43%
∅ 295
H 40 41%
∅ 285
[m]
∅ 270 38%

30

20
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30

7
∅ 325

6 ∅ 315

P ∅ 305
5
[kW] ∅ 295
4 ∅ 285
∅ 270
3

2
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30

5
NPSHR 4
3 ∅ 270 - 325
[m] 2
1
0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 13
Nenndrehzahl / nominal speed
SIHISuperNova 50-125
1750 min-1
Baureihe / series ZLND

10
∅ 140 50 % 60 % 66 %
70 %
73 %
9
∅ 130 75 %
8
73 %
7 ∅ 120 70 %
66 %
H 6
∅ 110
60 %
[m] 5
∅ 100

0
0 5 10 15 20 25 30 35 40 45

1,0
∅ 140
0,8
P ∅ 130
0,6
[kW] ∅ 120
0,4
∅ 110
∅ 100
0,2

0,0
0 10 20 30 40

5
NPSHR 4
3
∅ 100- 140
[m] 2
1
0
0 5 10 15 20 25 30 35 40 45
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
14 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 50-160
1750 min-1
Baureihe / series ZLND

18

16 ∅ 175 60% 68%


73%
77%
79%
80%
14 ∅ 160 79%
77%
12 ∅ 150 73%
H

[m] 10 ∅ 140

8 ∅ 130

2
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70

3,0

2,5 ∅ 175

P 2,0 ∅ 160

1,5 ∅ 150
[kW]
1,0 ∅ 140
∅ 130
0,5

0,0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70

6
NPSHR
4 ∅ 130 - 175

[m] 2
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 15
Nenndrehzahl / nominal speed
SIHISuperNova 50-200
1750 min-1
Baureihe / series ZLND

26
∅ 214 60%
24 65%
70%
74%
∅ 207 76%
22 76,5%
∅ 200 77%
76,5%
20 ∅ 190
76%
74%

H 18 ∅ 180

[m] 16
∅ 170

14

12

10

6
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70

4,5
∅ 214
4,0
∅ 207
3,5
∅ 200
P 3,0
∅ 190
[kW] 2,5
∅ 180
2,0 ∅ 170
1,5
1,0
0,5
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70

6
NPSHR
4 ∅ 170 - 214
[m] 2
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
16 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 50-250
1750 min-1
Baureihe / series ZLND

35
∅ 255 50%
55%
60%
65%
68%
∅ 245
69%
30
∅ 235 68%
H
65%
∅ 225
[m] 25

∅ 215

20

15
0 5 10 15 20 25 30 35 40 45 50

5 ∅ 255

∅ 245
P 4
∅ 235
3 ∅ 225
[kW]
∅ 215
2

0
0 5 10 15 20 25 30 35 40 45 50

4
NPSHR 3
∅ 215- 255
2
[m]
1
0
0 5 10 15 20 25 30 35 40 45 50
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 17
Nenndrehzahl / nominal speed
SIHISuperNova 50-315
1750 min-1
Baureihe / series ZLND

60
∅ 325 40 % 45 % 51 % 55 %
58 %

∅ 313 60 %
50
∅ 300 58 %

H 55 %
∅ 285

[m] 40 51 %
∅ 270

45 %

30

20
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70

14
∅ 325
12
∅ 313

P 10 ∅ 300

8 ∅ 285
[kW]
∅ 270
6

2
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70

2,5
NPSHR
2,0 ∅ 270 - 325
[m]
1,5
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
18 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 65-125
1750 min-1
Baureihe / series ZLND

11

50% 60%
10 ∅ 143 67%
72%
76%
79%
9 81%

82%
8 ∅ 130
81%

H 7 79%
∅ 120 76%
[m] 6 72%
∅ 110
67%
5
60%
4

1
0 10 20 30 40 50 60 70 80 90 100

2,0

∅ 143
1,5
P
∅ 130
1,0
[kW]
∅ 120
∅ 110
0,5

0,0
0 10 20 30 40 50 60 70 80 90 100

4
NPSHR 3 ∅ 110 - 143
2
[m] 1
0
0 20 40 60 80 100

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 19
Nenndrehzahl / nominal speed
SIHISuperNova 65-160
1750 min-1
Baureihe / series ZLND

18

∅ 175 60% 67%


16 73%
77%
80%
∅ 168 81%
14
80%
∅ 160
77%
12
H 73%
∅ 150

[m] 10 67%
∅ 140

8 ∅ 130
60%

2
0 10 20 30 40 50 60 70 80 90 100

4
∅ 175
3
∅ 168
P
∅ 160
2
[kW] ∅ 150
∅ 140
∅ 130
1

0
0 10 20 30 40 50 60 70 80 90 100

6
NPSHR ∅ 130- 175
4

[m] 2
0
0 10 20 30 40 50 60 70 80 90 100
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
20 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 65-200
1750 min-1
Baureihe / series ZLND

26

24 ∅ 214 60% 65% 70% 73%


76%
22 ∅ 207 78%
79%
∅ 200
20 78%
76%
18 ∅ 190
73%
H
16 ∅ 180

[m]
∅ 170
14

12

10

4
0 10 20 30 40 50 60 70 80 90 100

6
∅ 214
5 ∅ 207
∅ 200
P 4
∅ 190
3 ∅ 180
[kW]
2 ∅ 170

0
0 10 20 30 40 50 60 70 80 90 100

4
NPSHR 3
2 ∅ 170- 214
[m] 1
0
0 10 20 30 40 50 60 70 80 90 100

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 21
Nenndrehzahl / nominal speed
SIHISuperNova 65-250
1750 min-1
Baureihe / series ZLND

36
34
∅ 255 60% 66%
70%
32 73%
75%
30 ∅ 245 76%

75%
28
∅ 235
73%
26
H
∅ 225
24
[m] 70%
22
∅ 215
20
18
16
14
12
10
0 10 20 30 40 50 60 70 80 90 100

10
∅ 255
8
∅ 245
P ∅ 235
6
∅ 225
[kW] ∅ 215
4

0
0 10 20 30 40 50 60 70 80 90 100

4
NPSHR 3 ∅ 215-255
2
[m]
1
0
0 10 20 30 40 50 60 70 80 90 100

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
22 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 65-315
1750 min-1
Baureihe / series ZLND

60

∅ 325 50% 56%


61%
65%
∅ 315
67%
50
68 %
∅ 305
67%
H ∅ 295
65%
[m] 40 ∅ 285
61%

59 %

30

20
0 20 40 60 80 100 120 140

20
∅ 325
18
∅ 315
16
P ∅ 305
14
∅ 295
12 ∅ 285
[kW]
10
8
6
4
2
0 20 40 60 80 100 120 140

8
NPSHR 6
∅ 285-325
4
[m] 2
0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 23
Nenndrehzahl / nominal speed
SIHISuperNova 80-160
1750 min-1
Baureihe / series ZLND

18

∅ 175 60 % 68 %
75 %
16 80 %
83 %
∅ 168 84 %
14 83 %

∅ 160 80 %
12
H 75 %
∅ 150

[m] 10
∅ 140

8 ∅ 130

2
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140

5 ∅ 175

P 4 ∅ 168

∅ 160
3
[kW] ∅ 150
2 ∅ 140
∅ 130
1

0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140

6
NPSHR 4
∅ 130-175
[m] 2
0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
24 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 80-200
1750 min-1
Baureihe / series ZLND

26
∅ 214 55 % 65 %
24 72 % 76 %
79 %
81 %
∅ 207
22 82 %

81 %
∅ 200
20 79 %

18 76 %
∅ 190
H
16 ∅ 180
[m]
14 ∅ 170

12

10

4
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

9
8 ∅ 214

7 ∅ 207
P 6
∅ 200
[kW] 5
∅ 190
4
∅ 180
3 ∅ 170
2
1
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

4
NPSHR 3
∅ 170 - 214
2
[m] 1
0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 25
Nenndrehzahl / nominal speed
SIHISuperNova 80-250
1750 min-1
Baureihe / series ZLND

35
∅ 255 60% 67%
74%
78%
80%
81%
∅ 245
30
80%

78%
∅ 235

25 74 %
H
∅ 225
67%
[m]
∅ 215
20

15

10
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

12
∅ 255
10 ∅ 245

∅ 235
P 8
∅ 225
6 ∅ 215
[kW]
4

0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

4
NPSHR 3
∅ 215-255
2
[m] 1
0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
26 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 80-315
1750 min-1
Baureihe / series ZLND

60

∅ 325 60% 66% 70%


73%
50 ∅ 315 75%
76%
∅ 305
75%
∅ 295
73%
40 ∅ 285 70%
H
66%
[m]
60%
30

20

10
0 20 40 60 80 100 120 140 160 180

25
∅ 325
∅ 315
20
∅ 305
P ∅ 295
15 ∅ 285
[kW]
10

0
0 20 40 60 80 100 120 140 160 180

10
NPSHR 8
6
4 ∅ 285-325
[m]
2
0
0 20 40 60 80 100 120 140 160 180

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 27
Nenndrehzahl / nominal speed
SIHISuperNova 80-400
1750 min-1
Baureihe / series ZLND

90 ∅ 409 40 % 50 % 58 % 63 %
66 %
68 %
∅ 395

80 69 %
∅ 380
68 %

∅ 365 66 %
70
H
63 %
∅ 350
[m]
60 ∅ 335
58 %

50

40

30
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160

40
∅ 409
∅ 395

32 ∅ 380
P ∅ 365
∅ 350
24
[kW] ∅ 335

16

8
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160

4
NPSHR 3
∅ 335 - 409
2
[m]
1
0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
28 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 100-160
1750 min-1
Baureihe / series ZLND

16
∅ 183 50% 60% 66% 70%
74%
14 78%
∅ 170 80%
81%
∅ 160
12 80%
∅ 150 78%

H 10 ∅ 140 74%

70%
[m]
66%
8

60%
6

2
0 20 40 60 80 100 120 140 160 180 200 220 240 260

8
∅ 180

∅ 170
P 6
∅ 160

[kW] ∅ 150

4 ∅ 140

2
0 20 40 60 80 100 120 140 160 180 200 220 240 260

8
NPSHR 6
4 ∅ 140 - 180
[m] 2
0
0 20 40 60 80 100 120 140 160 180 200 220 240 260
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 29
Nenndrehzahl / nominal speed
SIHISuperNova 100-200
1750 min-1
Baureihe / series ZLND

60 ∅ 213 65% 73% 79%


83%
85%
∅ 200 86%
50 85%
∅ 190 83%

∅ 180
40
H
∅ 170

[m] 79%
30

73%

20

10

0
0 50 100 150 200 250 300 350

50

∅ 213
40
P
∅ 200
30
[kW]
∅ 190

20 ∅ 180

∅ 170

10
0 50 100 150 200 250 300 350

10
NPSHR 8
∅ 170-210
6
[m] 4
2
0 50 100 150 200 250 300 350
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
30 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 100-250
1750 min-1
Baureihe / series ZLND

35 60%
∅ 255 68%
75%
83%
85%
∅ 245
30 86%
∅ 235 85%

25 ∅ 225 83%

H ∅ 215 75%

20
[m]

15

10

0
0 20 40 60 80 100 120 140 160 180 200 220 240

18
∅ 255
16
14 ∅ 245
P
12 ∅ 235
[kW] 10 ∅ 225

8 ∅ 215

6
4
0 20 40 60 80 100 120 140 160 180 200 220 240

6
NPSHR
4 ∅ 215-255

[m] 2
0
0 20 40 60 80 100 120 140 160 180 200 220 240
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 31
Nenndrehzahl / nominal speed
SIHISuperNova 100-315
1750 min-1
Baureihe / series ZLND

60

∅ 325
55 60% 66%
71%
∅ 315 74%
50 76%
∅ 305 77%
45 ∅ 295 76%

∅ 285 74%
H 40
71%

[m] 35 66%

60%
30

25

20

15

10
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300

35
∅ 325
30 ∅ 315
∅ 305
P 25 ∅ 295
∅ 285
20
[kW]
15

10

5
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300

8
NPSHR 6
∅ 285-325
4
[m] 2
0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
32 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 100-400
1750 min-1
Baureihe / series ZLND

∅ 409 40% 50% 60%


60 65% 69%
72%
∅ 395
74%

∅ 380
50 72%
∅ 365
69%
H
∅ 350
65%
[m]
40 ∅ 335

30

20
0 20 40 60 80 100 120 140 160 180 200 220

40
35 ∅ 409

30 ∅ 395
P ∅ 380
25
∅ 365
[kW] 20 ∅ 350
∅ 335
15
10
5
0 20 40 60 80 100 120 140 160 180 200 220

3
NPSHR 2
∅ 335-409
2
[m] 1
1
0
0 20 40 60 80 100 120 140 160 180 200 220
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 33
Nenndrehzahl / nominal speed
SIHISuperNova 125-200
1750 min-1
Baureihe / series ZLND

26

24 50 % 60 % 68 % 73 %
∅ 220
77 %
80 %
22 ∅ 210 82 %

83 %
20 ∅ 200
82 %
18 ∅ 190
80 %
H
∅ 180 77 %
16
73 %
[m]
14 68 %

12

10

4
0 50 100 150 200 250 300 350 400 450 500

25
∅ 220

20
∅ 210
P
∅ 200
15
[kW] ∅ 190
∅ 180
10

5
0 50 100 150 200 250 300 350 400 450 500

10
NPSHR 8
6
∅ 180-220
[m] 4
2
0
0 50 100 150 200 250 300 350 400 450 500
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
34 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 125-250
1750 min-1
Baureihe / series ZLND

35
∅ 255 60 % 70 % 76 %
82 %
85 %
∅ 245 87 %
30 88 %
∅ 235 87 %
85 %
25 ∅ 225
82 %
H ∅ 215

[m] 20

15

10

5
0 50 100 150 200 250 300 350 400

30
∅ 255
25
∅ 245
P
20
∅ 235
[kW]
15 ∅ 225

∅ 215
10

5
0 50 100 150 200 250 300 350 400

6
NPSHR
4 ∅ 215- 255

[m] 2
0
0 50 100 150 200 250 300 350 400
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 35
Nenndrehzahl / nominal speed
SIHISuperNova 125-315
1750 min-1
Baureihe / series ZLND

60
∅ 329
50 % 60 % 70 % 75 % 80 %
82 %
55 85 %
∅ 315 87 %
50
∅ 300 85 %
45 82 %

∅ 285 80 %
H 40 75 %
∅ 270
70 %
[m] 35

30

25

20

15

10
0 50 100 150 200 250 300 350 400 450

60
∅ 329
50
∅ 315
P
40 ∅ 300

[kW] ∅ 285
30 ∅ 270

20

10
0 50 100 150 200 250 300 350 400 450

6
NPSHR
4
∅ 270-329

[m] 2
0
0 50 100 150 200 250 300 350 400 450
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
36 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 125-400
1750 min-1
Baureihe / series ZLND

90
40 % 50 % 60 %
∅ 409 65 % 70 %
75 %
78 %
80 ∅ 395
80 %

∅ 380

70 78%
∅ 365
H 75 %

∅ 350
[m] 60 70 %
∅ 335

50

40

30
0 50 100 150 200 250 300 350 400 450 500

100
∅ 409

80 ∅ 395

P ∅ 380
60 ∅ 365

[kW] ∅ 350
40 ∅ 335

20

0
0 50 100 150 200 250 300 350 400 450 500

6
NPSHR
4
∅ 335-409
[m] 2
0
0 50 100 150 200 250 300 350 400 450 500
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 37
Nenndrehzahl / nominal speed
SIHISuperNova 150-200
1750 min-1
Baureihe / series ZLND

24

22 60 % 70 %
∅ 220 75 %
81 %
85 %
20 87 %
∅ 205 88 %
18 87%
85 %
H 16 ∅ 190
81 %

[m] 14
∅ 175
75 %
12 ∅ 160

70 %
10

4
0 100 200 300 400 500 600

32

28 ∅ 220

P 24
∅ 205
20 ∅ 190
[kW]
16 ∅ 175
∅ 160
12

8
0 100 200 300 400 500 600

16
NPSHR 12
8 ∅ 160-220
[m] 4
0
0 100 200 300 400 500 600
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
38 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 150-250
1750 min-1
Baureihe / series ZLND

35
∅ 258 65% 73% 78%
82%
85%
87%
∅ 245
30 88%

∅ 235 87%
85%

25 ∅ 225
H 82%

[m] ∅ 215

20

15

10
0 100 200 300 400 500 600 700

50
∅ 258

∅ 245
40
P ∅ 235

∅ 225
30
[kW] ∅ 215

20

10
0 100 200 300 400 500 600 700

12
NPSHR
8
∅ 215-258
[m] 4
0
0 100 200 300 400 500 600 700
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 39
Nenndrehzahl / nominal speed
SIHISuperNova 150-315
1750 min-1
Baureihe / series ZLND

60

∅ 329 50% 60%


55 70% 77%
82%
85%

50 ∅ 315 87%

85%
45 ∅ 300
H 82%

40 ∅ 285
[m]

∅ 270
35

77%
30

25

20
0 100 200 300 400 500 600

90
80 ∅ 329

70 ∅ 315
P 60 ∅ 300

50 ∅ 285
[kW]
40 ∅ 270

30
20
10
0 100 200 300 400 500 600

5
NPSHR
4
∅ 270-329
[m] 3
2
0 100 200 300 400 500 600

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
40 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 150-400
1750 min-1
Baureihe / series ZLND

90
40% 50% 60% 70%
∅ 409 75%
80%
80 83%
∅ 395 84%

∅ 380 83%
70
80%
H ∅ 365

60 ∅ 350 75%
[m]
∅ 335

50

40

30
0 100 200 300 400 500 600 700

140
∅ 409

120 ∅ 395

∅ 380
P 100
∅ 365
80 ∅ 350
[kW]
∅ 335
60

40

20
0 100 200 300 400 500 600 700

6
NPSHR 5
4 ∅ 335-409
[m] 3
2
1
0 100 200 300 400 500 600 700
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 41
Nenndrehzahl / nominal speed
SIHISuperNova 200-250
1750 min-1
Baureihe / series ZLND

30

1
60% 72 %
78%
25 82%
2 86%

88%

20 3
86%
H 82%
4

[m] 15
5 78%

10
1 = 256 (256) / 236 (236) - 9°
2 = 256 (244) / 236 (209) - 15°
5 3 = 256 (232) / 236 (184) - 20°
4 = 256 (220) / 236 (157) - 24,5°
5 = 256 (214) / 236 (125) - 35,5°

0
0 100 200 300 400 500 600 700 800 900 1000

50
∅ 256

40
∅ 244
P

30 ∅ 232
[kW]
∅ 220
20
∅214
10
0 100 200 300 400 500 600 700 800 900 1000

8
NPSHR
6 ∅ 214 - 256

[m] 4
2
0 100 200 300 400 500 600 700 800 900 1000

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
42 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 32-125
3500 min-1
Baureihe / series ZLND

40 ∅ 140 40% 50% 55%


59%
62%

35 64%
∅ 130

62%
30
59%
∅ 120
H 55%
25
∅ 110 66 %
[m] 20
∅ 100

15

10

0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30

∅ 140
3
P
∅ 130
2
[kW]
∅ 120

∅ 110
1
∅ 100

0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30

10
NPSHR 8
6
4 ∅ 100 - 140
[m]
2
0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 43
Nenndrehzahl / nominal speed
SIHISuperNova 32-160A
3500 min-1
Baureihen / series ZLND

70
∅ 175 35% 42% 48% 52%
55%
57%
60 ∅168 58%
57%
∅ 160 55%
50

H ∅ 150

52%
[m] 40 ∅ 140

∅ 130
30

20

10
0 2 4 6 8 10 12 14 16 18 20 22 24

6
∅ 175
5
∅168
P 4 ∅ 160

∅ 150
3
[kW]
∅ 140
2 ∅ 130

0
0 2 4 6 8 10 12 14 16 18 20 22 24

3
NPSHR
2 ∅ 255 - 325

[m] 1
0
0 2 4 6 8 10 12 14 16 18 20 22 24
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
44 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 32-160B
3500 min-1
Baureihe / series ZLND

70

∅ 175 40% 48% 54%


60 58%
61%
∅ 168
63%
64%
50 ∅ 160
63%
∅ 150 61%
H 40 58%
∅ 140
[m]
∅ 130
30

20

10

0
0 5 10 15 20 25 30 35 40 45

10

8 ∅ 175
P ∅ 168
6 ∅ 160

[kW] ∅ 150
4 ∅ 140
∅ 130
2

0
0 5 10 15 20 25 30 35 40 45

10
NPSHR 8
6
4 ∅ 130 - 175
[m]
2
0
0 5 10 15 20 25 30 35 40 45
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 45
Nenndrehzahl / nominal speed
SIHISuperNova 32-200A
3500 min-1
Baureihe / series ZLND

100 ∅ 214 30% 35% 40% 44%


47%
49%
50%
90 ∅ 207

49%
∅ 200
80 47%

44%
H ∅190
70

[m] ∅ 180
60 40%

∅ 170
50

40

30
0 2 4 6 8 10 12 14 16 18 20 22 24

10
∅ 214
∅ 207
8
∅ 200
P ∅190
6
∅ 180
[kW]
4 ∅ 170

0
0 2 4 6 8 10 12 14 16 18 20 22 24

3,0
NPSHR
2,0 ∅ 170 - 217

[m]
1,0
0,0
0 2 4 6 8 10 12 14 16 18 20 22 24
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
46 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 32-200B
3500 min-1
Baureihe / series ZLND

100 ∅ 214 43% 49% 54%


58%
61%
63%
∅ 207
90 64%

∅ 200 63%
80 61%
H ∅190

70
58%
[m] ∅ 180

60
∅ 170
54%
50

40

30
0 5 10 15 20 25 30 35 40 45

14 ∅ 214
∅ 207
12
∅ 200
P
10
∅190
[kW] 8 ∅ 180

6 ∅ 170

4
2
0 5 10 15 20 25 30 35 40 45

10
NPSHR 8
6
4 ∅ 170 - 214
[m]
2
0
0 5 10 15 20 25 30 35 40 45
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 47
Nenndrehzahl / nominal speed
SIHISuperNova 40-125
3500 min-1
Baureihe / series ZLND

40 ∅ 140 50% 60% 66%


70%
72%
73%
∅ 130 72%
70%
30
∅ 120 66%

H 60 %

∅ 110
[m] 20
∅ 100

10

0
0 5 10 15 20 25 30 35 40 45 50

5
∅ 140

4
P ∅ 130
3
[kW] ∅ 120
2 ∅ 110

∅ 100
1

0
0 5 10 15 20 25 30 35 40 45 50

10
NPSHR 8
6
∅ 100-140
4
[m]
2
0
0 5 10 15 20 25 30 35 40 45 50

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
48 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 40-160
3500 min-1
Baureihe / series ZLND

70
∅ 175 55% 60% 65%
69%
∅168 72%
60 74%
75%
∅ 160
74%
50
∅ 150 72%
H 69%
∅ 140
[m] 40

∅ 130

30

20

10
0 10 20 30 40 50 60 70 80 90

14
∅ 175
12 ∅168

10 ∅ 160
P
8 ∅ 150
[kW] 6 ∅ 140
∅ 130
4
2
0
0 10 20 30 40 50 60 70 80 90

6
NPSHR
4 ∅ 130 - 175

[m] 2
0
0 10 20 30 40 50 60 70 80 90
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 49
Nenndrehzahl / nominal speed
SIHISuperNova 40-200
3500 min-1
Baureihe / series ZLND

110

∅ 214 50% 58% 63%


100 67% 70%
72%
∅ 207
73%
90 ∅ 200
72%
70%
67%
80 ∅190

H
70 ∅ 180

[m]
60 ∅ 170 63%

50

40

30

20
0 10 20 30 40 50 60 70 80 90

30
∅ 214
∅ 207
P 20 ∅ 200
∅190

[kW] ∅ 180

10 ∅ 170

0
0 10 20 30 40 50 60 70 80 90

6
NPSHR ∅ 1705 - 214
4

[m] 2
0
0 10 20 30 40 50 60 70 80 90
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
50 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 50-125
3500 min-1
Baureihe / series ZLND

40
∅ 140 50 % 60 % 66 %
70 %
73 %

∅ 130 75 %

30 73 %
∅ 120 70 %
66 %
H ∅ 110
60 %

[m] 20 ∅ 100

10

0
0 10 20 30 40 50 60 70 80 90

8
∅ 140
7
6
P ∅ 130
5
4 ∅ 120
[kW]
3
∅ 110
2 ∅ 100

1
0
0 10 20 30 40 50 60 70 80 90

10
NPSHR 8
6
4 ∅ 100-140
[m] 2
0
0 10 20 30 40 50 60 70 80

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 51
Nenndrehzahl / nominal speed
SIHISuperNova 50-160
3500 min-1
Baureihe / series ZLND

70

∅ 175 60% 68%


73%
60 77%
79%
∅ 160 80%
79%
50 77%
∅ 150
H 73%

[m] 40 ∅ 140

∅ 130
30

20

10
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140

20
∅ 175
18
16
∅ 160
P 14
12 ∅ 150
[kW] 10
∅ 140
8
6 ∅ 130
4
2
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140

10
NPSHR 8
6 ∅ 130-175

[m] 4
2
0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
52 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 50-200
3500 min-1
Baureihe / series ZLND

100
∅ 214 60%
65% 70%
74%
∅ 207
90 76%
76,5%
∅ 200 77%
76,5%
80
76%
∅ 190

H 70 ∅ 180
74%
[m]
60 ∅ 170

50

40

30
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140

35
∅ 214
30
∅ 207
P 25 ∅ 200

∅ 190
20
[kW]
∅ 180
15 ∅ 170

10

5
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140

10
NPSHR 8
6 ∅ 170-214
4
[m] 2
0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140
Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 53
Nenndrehzahl / nominal speed
SIHISuperNova 65-125
3500 min-1
Baureihe / series ZLND

45

∅ 143 50% 60%


40 67%
72%
76%
79%
35 81%
82%
∅ 130
81%
30
H 79%
∅ 120 76%
[m] 25
72%
∅ 110 67%
20
60%

15

10

5
0 20 40 60 80 100 120 140 160 180 200

14
∅ 143
12

P 10
∅ 130
8
[kW]
6 ∅ 120
∅ 110
4

2
0 20 40 60 80 100 120 140 160 180 200

12
NPSHR 8
∅ 110-143
4
[m]
0
0 20 40 60 80 100 120 140 160 180 200

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
54 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 65-160
3500 min-1
Baureihe / series ZLND

70

∅ 175 60% 67% 73%


77%
60 80%
∅ 168
81%

∅ 160 80%
50 77%
H ∅ 150
73%

[m] 40
∅ 140 67%

∅ 130
30 60%

20

10
0 20 40 60 80 100 120 140 160 180 200

30
∅ 175
25
∅ 168
P 20
∅ 160

[kW] 15 ∅ 150
∅ 140
10 ∅ 130

0
0 20 40 60 80 100 120 140 160 180 200

10
NPSHR 8
∅ 130-175
6
[m] 4
2
0 20 40 60 80 100 120 140 160 180 200

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 55
Nenndrehzahl / nominal speed
SIHISuperNova 65-200
3500 min-1
Baureihe / series ZLND

100

∅ 214 60% 65% 70%


73%
90 76%
78%
∅ 207
79%
80 ∅ 200
78%
76%
∅ 190
70 73%
H
∅ 180

[m] 60
∅ 170

50

40

30

20
0 20 40 60 80 100 120 140 160 180

45
∅ 214
40
∅ 207
35
P ∅ 200
30
25 ∅ 190
[kW]
20 ∅ 180
∅ 170
15
10
5
0 20 40 60 80 100 120 140 160 180

12
NPSHR
8
∅ 170-214
[m] 4
0
0 20 40 60 80 100 120 140 160 180

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
56 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 80-160
3500 min-1
Baureihe / series ZLND

70

∅ 175 60 % 68 % 75 %
80 %
60 83 %
∅ 168 84 %

83 %
50 ∅ 160
80 %
H 75 %
∅ 150

[m] 40
∅ 140

∅ 130
30

20

10
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280

40
∅ 175
∅ 168
30
P ∅ 160

20 ∅ 150
[kW]
∅ 140
∅ 130
10

0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280

10
NPSHR 8
∅ 130-175
6
[m] 4
2
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 57
Nenndrehzahl / nominal speed
SIHISuperNova 80-200
3500 min-1
Baureihe / series ZLND

100
∅ 214 55 % 65 % 72 %
76 %
79 %
90 50 % 81 %
∅ 207 60 %
66 % 70 %
82 %
73 %
∅ 200 81 %
80 74 %
79 %
73 %
76 %
70 ∅ 190
70 %
H
∅ 180 66 %
[m] 60
∅ 170

50

40

30

20
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300

70
∅ 214
60
∅ 207
P 50
∅ 200
40
[kW]
∅ 190
30 ∅ 180
∅ 170
20

10
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300

10
NPSHR 8
6 ∅ 170-214
[m] 4
2
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
58 122.65502.51.01
Nenndrehzahl / nominal speed
SIHISuperNova 100-160
3500 min-1
Baureihe / series ZLND

60
∅ 183 50%
60% 66%
70%
55 74%
50 % 60 % 78%
∅ 170 66 % 70 % 80%
50 73 %
81%
∅ 160 74 %
80%73 %
45
∅ 150 78% 70 %
H
40
∅ 140 74% 66 %
[m]
35 70%

30
66%
25

20

15
0 100 200 300 400 500

60
∅ 180

50 ∅ 170
P
∅ 160

[kW] 40
∅ 150

∅ 140
30

20
0 100 200 300 400 500

12
NPSHR 8
∅ 140 - 180
4
[m]
0
0 100 200 300 400 500

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewerte nach ISO 9906, Anhand A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
x Guarantee values according to ISO 9906, Annx A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
122.65502.51.01 59
Nenndrehzahl / nominal speed
SIHISuperNova 100-200
3500 min-1
Baureihe / series ZLND

90
∅ 213 65%
73%
79%
80 83%
85%
∅ 200
86%
70 85%
∅ 190 83%

60 ∅ 180

H
50 ∅ 170

[m] 79%
40
73%
30

20

10

0
0 50 100 150 200 250 300 350 400 450

80
∅ 213
70

P 60 ∅ 200

50
[kW]
∅ 190
40
∅ 180
30 ∅ 170

20
0 50 100 150 200 250 300 350 400 450

15
NPSHR ∅ 170-213
10

[m] 5
0
0 50 100 150 200 250 300 350 400 450

Q [m³/h]

1 m³/h = 3,663 Imp g.p.m / 4,405 US g.p.m. 1 m = 3,28 ft


Bitte beachten: Gültig für: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Garantiewrte nach ISO 9906, Anhang A
NPSHR - garantierte NPSHR Werte erfordern einen Sicherheitszuschlag von mindestens 0,5 m
Leistungskennlinie berücksichtigt nicht Wirbelstromverluste bei Pumpen mit Magnetkupplung
Please observe: Valid for: ρ = 1 kg/dm³, ν ≤ 20 mm²/s
Guarantee values according to ISO 9906, Annex A
NPSHR - for guaranteed NPSHR values, add minimum 0,5 m safety margins on the values read from the curves
Power consumption does not include Eddy Current Losses for pumps with magnetic drive
60 122.65502.51.01

Das könnte Ihnen auch gefallen