Beruflich Dokumente
Kultur Dokumente
PROJECT REFERENCE
Originator
Project N° Unit Number Doc. Type Material Code Serial Number Revision No. of Pages
DOCUMENT CATEGORY
☐ INFORMATION – Class 1
☒ REVIEW – Class 2
ISSUED FOR
☒ OWNER
☐ INTERNAL- CONSORTIUM
☐ INTERNAL-TECHNIP-FMC
☐ INTERNAL - LTHE
A 07/09/18 ISSUED FOR REVIEW SAMADHAN AHER JATIN GANDEVIKAR JATIN GANDEVIKAR
Rev Date STATUS WRITTEN BY CHECKED BY APPROVED BY
DD/MM/YY (name & visa) (name & visa) (name & visa)
DOCUMENT REVISIONS
Sections changed in last revision are identified by a vertical line in the margin
CONFIDENTIAL INFORMATION –The information contained in this document belongs to LTHE. All IP rights relevant to this document are
expressly reserved.
Page 1 of 4
STANDARD INSPECTION AND TEST PLAN FOR CARBON STEEL FITTINGS (FORGED,SEAMLESS & WELDED)
Purchaser : L&T Hydrocarbon Engineering Limited, Vadodara Item Description CS FITTINGS (FORGED, SEAMLESS & WELDED) (FOR OEM/Mill Only)
Project : Ammonia Urea Fertilizer Plant ITP Document No. LT-077625-C00-ITP-1330-5500 Rev.A
Client : Hindustan Urvarak & Rasayan Limited (HURL) MR/PR/Specification No. PDIL Spec:5003/E-01/P-II/5.2.3 Rev 0
STANDARD INSPECTION AND TEST PLAN FOR CARBON STEEL FITTINGS (FORGED,SEAMLESS & WELDED)
Purchaser : L&T Hydrocarbon Engineering Limited, Vadodara Item Description CS FITTINGS (FORGED, SEAMLESS & WELDED) (FOR OEM/Mill Only)
Project : Ammonia Urea Fertilizer Plant ITP Document No. LT-077625-C00-ITP-1330-5500 Rev.A
Client : Hindustan Urvarak & Rasayan Limited (HURL) MR/PR/Specification No. PDIL Spec:5003/E-01/P-II/5.2.3 Rev 0
As per Material
Grain Size Measurement - As Applicable As per Material Spec./Project As per Material Spec./Project
9.5 Spec./Project Insp. Report H R R*
(ASTM E112) Spec. Spec.
Spec.
10 NDT
RT of all welds of welded fittings after Heat
10.1 100% NDT Reports H R# #- Review of RT Films
Treatment (Note 6)
R*
W
10.2 PT/MT of Bevel Edges 100% NDT Reports H
(10%)
PT/MPT on Fittings surface after heat Project specification; ASME Project specification; ASME W
10.3 100% NDT Reports H
treatment (As Applicalbe) Sec VIII Div.1; ASME Sec. V Sec VIII Div.1; ASME Sec. V (10%)
UT Thickness Gauging for all wrought elbows
R*
& bends of size ≥ 2" NPS (Note 7) :- Thickness W
10.4 100% H
At least five readings at different locations on Measurement Reports (10%)
extradose/outer radius of elbows
11 Final Inspection
11.1 Visual Examination (Note 8) 100% Insp. Report H W R*
W
11.2 Overall Dimensional Check (Note 9) 100% Insp. Report H R*
(10%)
Project Project Mass of Zinc coating and
W
11.3 Galvanizing (If applicable) (Note 10) 100% Specifications;Material Specifications;Material Insp. Reports H R* coating thickness to be
(10%)
specifications ;Applicable specifications;Applicable checked.
Procedures Procedures W
11.4 End Preparation & End Protection (Note 11) 100% Insp. Report H R*
(10%)
Verification of Marking & Colour Coding
11.5 100% IC / IRN H W R*
(Note 12)
Identification marking / stamping by TPIA
11.6 100% PO & Specification PO & Specification IC / IRN H W R*
(Note 13)
11.7 Verification of IBR Stamp for IBR items 100% - - IC / IRN H W R*
Project Project
MTC as per EN10204
12 Manufacturer's Test Certificate (Note 14) 100% Specifications;Material Specifications;Material H R R*
3.1
specifications; specifications;
13 Inspection Certificate / Release Note 100% PO & Specification PO & Specification IC / IRN H Issue R*
Page 3 of 4
STANDARD INSPECTION AND TEST PLAN FOR CARBON STEEL FITTINGS (FORGED,SEAMLESS & WELDED)
Purchaser : L&T Hydrocarbon Engineering Limited, Vadodara Item Description CS FITTINGS (FORGED, SEAMLESS & WELDED) (FOR OEM/Mill Only)
Project : Ammonia Urea Fertilizer Plant ITP Document No. LT-077625-C00-ITP-1330-5500 Rev.A
Client : Hindustan Urvarak & Rasayan Limited (HURL) MR/PR/Specification No. PDIL Spec:5003/E-01/P-II/5.2.3 Rev 0
STANDARD INSPECTION AND TEST PLAN FOR CARBON STEEL FITTINGS (FORGED,SEAMLESS & WELDED)
Purchaser : L&T Hydrocarbon Engineering Limited, Vadodara Item Description CS FITTINGS (FORGED, SEAMLESS & WELDED) (FOR OEM/Mill Only)
Project : Ammonia Urea Fertilizer Plant ITP Document No. LT-077625-C00-ITP-1330-5500 Rev.A
Client : Hindustan Urvarak & Rasayan Limited (HURL) MR/PR/Specification No. PDIL Spec:5003/E-01/P-II/5.2.3 Rev 0