Sie sind auf Seite 1von 16

Technical Support Section

MANUFACTURING INSTRUCTIONS
DESC. : Cu/PVC/PVC 300/500 V W.O. # : 2/2011
SIZE : 3 × 1.5 mm² Flex Specs. : BS 6500
Item code : U1T2-30800F-20202K-A

Thick. Diam. Weight


Constructional Details (mm) (mm) (kg/km)

Conductor : Soft Drawn Copper

Round Flexible conductor (Class 5)

1.5 mm2 ( 28 × 0.247 ) Lay Length** 25 mm - 1.60 39.16

Top Layer Right Hand (Z)

Insulation Layer : Phase: PVC-TI2 Nom. 0.70 3.00


24.20
Min. 0.62 -

3 Insulated Cores : G/Y, Blue & Brown - -


6.48
Lay length 141 mm, Direction (Z)

Sheathing: PVC TM2 - Black Nom. 0.90


8.28 48.80
Min. 0.62

PVC M.B - PVC 2.5% (PVC Weight) 2.78

TOTAL WEIGHT 112.16


*)Hypothetical **) L.L for Guidance Only.

Embossing details on outer sheath shall be in max. 50 cm spacing as follows:

EMBOSSING MESSAGE :UNITED CABLE - JORDAN 3×1.5 SQMM - (NYMHY)


N.B.:
The marking shall start at a distance of 50cm from the inner end of the cable.
The length marking shall start at one meter distance from the inner end of the cable.
Minimum Bending Radius = 66 mm
The Cutting Length shall be 2000 ± 5%

Issued By : TE
Verified by : TDH
Revised & amended by : TDH,PRM,PM
Technical Support Engineer
Bashar Alwadyan

QP-09/F06 Rev.:1
Technical Support Section
Single Core Power Cable
CU/PVC/AWA/PVC
Insulation (PVC) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)
Size(mm²)
Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires Nominal (mm) Min. (mm)
1.5 0.8 1 0.6 0.9 19 1.8 1.24
2.5 0.8 1 0.6 0.9 20 1.8 1.24
4 1 1 0.6 0.9 23 1.8 1.24
6 1 1 0.6 0.9 25 1.8 1.24
10 1 1 0.6 0.9 28 1.8 1.24
16 1 1 0.6 0.9 31 1.8 1.24
25 1.2 1 0.6 0.9 35 1.8 1.24
35 1.2 1 0.6 0.9 38 1.8 1.24
50 1.4 1 0.6 1.25 32 1.8 1.24
70 1.4 1 0.6 1.25 36 1.8 1.24
95 1.6 1 0.6 1.25 41 1.8 1.24
120 1.6 1 0.6 1.6 35 1.8 1.24
150 1.8 1 0.6 1.6 38 1.8 1.24
185 2 1 0.6 1.6 42 1.8 1.24
240 2.2 1 0.6 1.6 47 1.9 1.32
300 2.4 1 0.6 2 41 2 1.4
400 2.6 1.2 0.76 2 47 2.1 1.48
500 2.8 1.2 0.76 2 52 2.2 1.56
630 2.8 1.2 0.76 2 56 2.4 1.72

CU/PVC/PVC
Insulation (PVC) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)
Size(mm²)
Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires Nominal (mm) Min. (mm)
1.5 0.8 - - - - 1.4 1.09
2.5 0.8 - - - - 1.4 1.09
4 1 - - - - 1.4 1.09
6 1 - - - - 1.4 1.09
10 1 - - - - 1.4 1.09
16 1 - - - - 1.4 1.09
25 1.2 - - - - 1.4 1.09
35 1.2 - - - - 1.4 1.09
50 1.4 - - - - 1.4 1.09
70 1.4 - - - - 1.4 1.09
95 1.6 - - - - 1.5 1.18
120 1.6 - - - - 1.5 1.18
150 1.8 - - - - 1.6 1.26
185 2 - - - - 1.7 1.35
240 2.2 - - - - 1.8 1.43
300 2.4 - - - - 1.9 1.52
400 2.6 - - - - 2 1.6
500 2.8 - - - - 2.1 1.69
630 2.8 - - - - 2.2 1.77

2
Technical Support Section
Single Core Power Cable
CU/XLPE/AWA/PVC
Insulation (XLPE) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)
Size(mm²)
Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires Nominal (mm) Min. (mm)
1.5 0.7 1 0.6 0.9 19 1.8 1.24
2.5 0.7 1 0.6 0.9 20 1.8 1.24
4 0.7 1 0.6 0.9 22 1.8 1.24
6 0.7 1 0.6 0.9 23 1.8 1.24
10 0.7 1 0.6 0.9 26 1.8 1.24
16 0.7 1 0.6 0.9 30 1.8 1.24
25 0.9 1 0.6 0.9 33 1.8 1.24
35 0.9 1 0.6 0.9 37 1.8 1.24
50 1 1 0.6 1.25 30 1.8 1.24
70 1.1 1 0.6 1.25 34.00 1.8 1.24
95 1.1 1 0.6 1.25 38 1.8 1.24
120 1.2 1 0.6 1.6 33 1.8 1.24
150 1.4 1 0.6 1.6 37 1.8 1.24
185 1.6 1 0.6 1.6 40 1.8 1.24
240 1.7 1 0.6 1.6 45 1.9 1.32
300 1.8 1 0.6 1.6 49 1.9 1.32
400 2 1.2 0.76 2 45 2.1 1.48
500 2.2 1.2 0.76 2 50 2.2 1.56
630 2.4 1.2 0.76 2 55 2.3 1.64

CU/XLPE/PVC
Insulation (XLPE) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)
Size(mm²)
Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires Nominal (mm) Min. (mm)
1.5 0.7 - - - - 1.4 1.09
2.5 0.7 - - - - 1.4 1.09
4 0.7 - - - - 1.4 1.09
6 0.7 - - - - 1.4 1.09
10 0.7 - - - - 1.4 1.09
16 0.7 - - - - 1.4 1.09
25 0.9 - - - - 1.4 1.09
35 0.9 - - - - 1.4 1.09
50 1 - - - - 1.4 1.09
70 1.1 - - - - 1.4 1.09
95 1.1 - - - - 1.5 1.18
120 1.2 - - - - 1.5 1.18
150 1.4 - - - - 1.6 1.26
185 1.6 - - - - 1.6 1.26
240 1.7 - - - - 1.7 1.35
300 1.8 - - - - 1.8 1.43
400 2 - - - - 1.9 1.52
500 2.2 - - - - 2 1.6
630 2.4 - - - - 2.2 1.77

3
Tow Cores Power Cable
Technical Support Section

CU/PVC/SWA/PVC
Insulation (PVC) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)
Size(mm²)
Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires Nominal (mm) Min. (mm)

1.5 0.8 1 0.6 0.9 29 1.8 1.24


2.5 0.8 1 0.6 0.9 32 1.8 1.24
4 1 1 0.6 0.9 38 1.8 1.24
6 1 1 0.6 1.25 31 1.8 1.24
10 1 1 0.6 1.25 35 1.8 1.24
16 1 1 0.6 1.25 39 1.8 1.24
25 1.2 1 0.6 1.6 36 1.8 1.24
35 1.2 1 0.6 1.6 39 1.8 1.24
50 1.4 1 0.6 1.6 45 1.9 1.32
70 1.4 1 0.6 2 41 2 1.4
95 1.6 1.2 0.76 2 48 2.2 1.56
120 1.6 1.2 0.76 2 52 2.3 1.64
150 1.8 1.2 0.76 2.5 46 2.4 1.72
185 2 1.4 0.92 2.5 51 2.6 1.88
240 2.2 1.4 0.92 2.5 58 2.8 2.04
300 2.4 1.6 1.08 2.5 64 2.9 2.12
400 2.6 1.6 1.08 2.5 71 3.2 2.36

CU/PVC/PVC
Insulation (PVC) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)
Size(mm²)
Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires Nominal (mm) Min. (mm)

1.5 0.8 - - - - 1.8 1.43


2.5 0.8 - - - - 1.8 1.43
4 1 - - - - 1.8 1.43
6 1 - - - - 1.8 1.43
10 1 - - - - 1.8 1.43
16 1 - - - - 1.8 1.43
25 1.2 - - - - 1.8 1.43
35 1.2 - - - - 1.8 1.43
50 1.4 - - - - 1.8 1.43
70 1.4 - - - - 1.9 1.52
95 1.6 - - - - 2 1.6
120 1.6 - - - - 2.1 1.69
150 1.8 - - - - 2.2 1.77
185 2 - - - - 2.4 1.94
240 2.2 - - - - 2.5 2.03
300 2.4 - - - - 2.7 2.2
400 2.6 - - - - 2.9 2.37

4
Tow Cores Power Cable
Technical Support Section
CU/XLPE/SWA/PVC
Insulation (XLPE) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)
Size(mm²)
Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires Nominal (mm) Min. (mm)

1.5 0.7 1 0.6 0.9 28 1.8 1.24


2.5 0.7 1 0.6 0.9 31 1.8 1.24
4 0.7 1 0.6 0.9 34 1.8 1.24
6 0.7 1 0.6 0.9 38 1.8 1.24
10 0.7 1 0.6 1.25 32 1.8 1.24
16 0.7 1 0.6 1.25 37 1.8 1.24
25 0.9 1 0.6 1.6 34 1.8 1.24
35 0.9 1 0.6 1.6 37 1.8 1.24
50 1 1 0.6 1.6 42 1.8 1.24
70 1.1 1 0.6 1.6 48 2 1.4
95 1.1 1.2 0.76 2 45 2.1 1.48
120 1.2 1.2 0.76 2 49 2.2 1.56
150 1.4 1.2 0.76 2 55 2.3 1.64
185 1.6 1.4 0.92 2.5 49 2.5 1.8
240 1.7 1.4 0.92 2.5 55 2.7 1.96
300 1.8 1.6 1.08 2.5 61 2.8 2.04
400 2 1.6 1.08 2.5 68 3.1 2.28

CU/XLPE/PVC
Insulation (XLPE) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)
Size(mm²)
Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires Nominal (mm) Min. (mm)

1.5 0.7 - - - - 1.8 1.43


2.5 0.7 - - - - 1.8 1.43
4 0.7 - - - - 1.8 1.43
6 0.7 - - - - 1.8 1.43
10 0.7 - - - - 1.8 1.43
16 0.7 - - - - 1.8 1.43
25 0.9 - - - - 1.8 1.43
35 0.9 - - - - 1.8 1.43
50 1 - - - - 1.8 1.43
70 1.1 - - - - 1.8 1.43
95 1.1 - - - - 1.9 1.52
120 1.2 - - - - 2 1.6
150 1.4 - - - - 2.2 1.77
185 1.6 - - - - 2.3 1.86
240 1.7 - - - - 2.5 2.03
300 1.8 - - - - 2.6 2.11
400 2 - - - - 2.9 2.37

5
Three Core Power Cable
Technical Support Section

CU/PVC/SWA/PVC

Insulation (PVC) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)


Size(mm²)
Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires Nominal (mm) Min. (mm)

1.5 0.8 1 0.6 0.9 31 1.8 1.24


2.5 0.8 1 0.6 0.9 34 1.8 1.24
4 1 1 0.6 1.25 30 1.8 1.24
6 1 1 0.6 1.25 32 1.8 1.24
10 1 1 0.6 1.25 37 1.8 1.24
16 1 1 0.6 1.25 42 1.8 1.24
25 1.2 1 0.6 1.6 33 1.8 1.24
35 1.2 1 0.6 1.6 36 1.8 1.24
50 1.4 1 0.6 1.6 42 2 1.4
70 1.4 1.2 0.76 2 39 2.1 1.48
95 1.6 1.2 0.76 2 44 2.2 1.56
120 1.6 1.2 0.76 2 47 2.3 1.64
150 1.8 1.4 0.92 2.5 43 2.5 1.8
185 2 1.4 0.92 2.5 47 2.7 1.96
240 2.2 1.6 1.08 2.5 52 2.9 2.12
300 2.4 1.6 1.08 2.5 58 3.1 2.28
400 2.6 1.8 1.24 3.15 52 3.4 2.52

CU/PVC/PVC
Insulation (PVC) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)
Size(mm²)
Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires Nominal (mm) Min. (mm)

1.5 0.8 - - - - 1.8 1.43


2.5 0.8 - - - - 1.8 1.43
4 1 - - - - 1.8 1.43
6 1 - - - - 1.8 1.43
10 1 - - - - 1.8 1.43
16 1 - - - - 1.8 1.43
25 1.2 - - - - 1.8 1.43
35 1.2 - - - - 1.8 1.43
50 1.4 - - - - 1.8 1.43
70 1.4 - - - - 1.9 1.52
95 1.6 - - - - 2.1 1.69
120 1.6 - - - - 2.2 1.77
150 1.8 - - - - 2.3 1.86
185 2 - - - - 2.5 2.03
240 2.2 - - - - 2.7 2.2
300 2.4 - - - - 2.8 2.28
400 2.6 - - - - 3.1 2.54

6
Three Core Power Cable
Technical Support Section

CU/XLPE/SWA/PVC
Insulation (XLPE) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)
Size(mm²)
Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires Nominal (mm) Min. (mm)

1.5 0.7 1 0.6 0.9 29 1.8 1.24


2.5 0.7 1 0.6 0.9 32 1.8 1.24
4 0.7 1 0.6 0.9 36 1.8 1.24
6 0.7 1 0.6 0.9 40 1.8 1.24
10 0.7 1 0.6 1.25 34 1.8 1.24
16 0.7 1 0.6 1.25 39 1.8 1.24
25 0.9 1 0.6 1.6 31 1.8 1.24
35 0.9 1 0.6 1.6 34 1.8 1.24
50 1 1 0.6 1.6 39 1.9 1.32
70 1.1 1.2 0.76 2 37 2 1.4
95 1.1 1.2 0.76 2 41 2.2 1.56
120 1.2 1.2 0.76 2 45 2.3 1.64
150 1.4 1.4 0.92 2.5 41 2.5 1.8
185 1.6 1.4 0.92 2.5 45 2.6 1.88
240 1.7 1.6 1.08 2.5 50 2.8 2.04
300 1.8 1.6 1.08 2.5 55 3 2.2
400 2 1.6 1.08 2.5 62 3.2 2.36

CU/XLPE/PVC
Insulation (XLPE) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)
Size(mm²)
Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires Nominal (mm) Min. (mm)

1.5 0.7 - - - - 1.8 1.43


2.5 0.7 - - - - 1.8 1.43
4 0.7 - - - - 1.8 1.43
6 0.7 - - - - 1.8 1.43
10 0.7 - - - - 1.8 1.43
16 0.7 - - - - 1.8 1.43
25 0.9 - - - - 1.8 1.43
35 0.9 - - - - 1.8 1.43
50 1 - - - - 1.8 1.43
70 1.1 - - - - 1.9 1.52
95 1.1 - - - - 2 1.6
120 1.2 - - - - 2.1 1.69
150 1.4 - - - - 2.3 1.86
185 1.6 - - - - 2.4 1.94
240 1.7 - - - - 2.6 2.11
300 1.8 - - - - 2.7 2.2
400 2 - - - - 3 2.45

7
Four Cores Power Cable

Technical Support Section

CU/PVC/SWA/PVC

Insulation (PVC) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)


Size(mm²)
Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires Nominal (mm) Min. (mm)

1.5 0.8 1 0.6 0.9 33 1.8 1.24


2.5 0.8 1 0.6 0.9 37 1.8 1.24
4 1 1 0.6 1.25 32 1.8 1.24
6 1 1 0.6 1.25 35 1.8 1.24
10 1 1 0.6 1.25 40 1.8 1.24
16 1 1 0.6 1.6 37 1.8 1.24
25 1.2 1 0.6 1.6 39 1.8 1.24
35 1.2 1 0.6 1.6 43 1.9 1.32
50 1.4 1.2 0.76 2 41 2.1 1.48
70 1.4 1.2 0.76 2 46 2.2 1.56
95 1.6 1.2 0.76 2.5 43 2.4 1.72
120 1.6 1.4 0.92 2.5 47 2.5 1.8
150 1.8 1.4 0.92 2.5 51 2.7 1.96
185 2 1.6 1.08 2.5 57 2.9 2.12
240 2.2 1.6 1.08 2.5 63 3.1 2.28
300 2.4 1.6 1.08 3.15 56 3.3 2.44
400 2.6 1.8 1.24 3.15 63 3.6 2.68

CU/PVC/PVC

Insulation (PVC) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)


Size(mm²)
Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires Nominal (mm) Min. (mm)

1.5 0.8 - - - - 1.8 1.43


2.5 0.8 - - - - 1.8 1.43
4 1 - - - - 1.8 1.43
6 1 - - - - 1.8 1.43
10 1 - - - - 1.8 1.43
16 1 - - - - 1.8 1.43
25 1.2 - - - - 1.8 1.43
35 1.2 - - - - 1.8 1.43
50 1.4 - - - - 1.9 1.52
70 1.4 - - - - 2 1.6
95 1.6 - - - - 2.2 1.77
120 1.6 - - - - 2.3 1.86
150 1.8 - - - - 2.5 2.03
185 2 - - - - 2.6 2.11
240 2.2 - - - - 2.9 2.37
300 2.4 - - - - 3.1 2.54
400 2.6 - - - - 3.4 2.79

8
Four Cores Power Cable

Technical Support Section

CU/XLPE/SWA/PVC

Insulation (XLPE) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)


Size(mm²)
Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires Nominal (mm) Min. (mm)

1.5 0.7 1 0.6 0.9 32 1.8 1.24


2.5 0.7 1 0.6 0.9 35 1.8 1.24
4 0.7 1 0.6 0.9 39 1.8 1.24
6 0.7 1 0.6 1.25 32 1.8 1.24
10 0.7 1 0.6 1.25 37 1.8 1.24
16 0.7 1 0.6 1.6 34 1.8 1.24
25 0.9 1 0.6 1.6 37 1.8 1.24
35 0.9 1 0.6 1.6 41 1.9 1.32
50 1 1 0.6 1.6 47 2 1.4
70 1.1 1.2 0.76 2 44 2.2 1.56
95 1.1 1.2 0.76 2 49 2.3 1.64
120 1.2 1.4 0.92 2.5 44 2.5 1.8
150 1.4 1.4 0.92 2.5 49 2.6 1.88
185 1.6 1.4 0.92 2.5 54 2.8 2.04
240 1.7 1.6 1.08 2.5 61 3 2.2
300 1.8 1.6 1.08 2.5 67 3.2 2.36
400 2 1.8 1.24 3.15 61 3.5 2.6

CU/XLPE/PVC

Insulation (XLPE) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)


Size(mm²)
Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires Nominal (mm) Min. (mm)

1.5 0.7 - - - - 1.8 1.43


2.5 0.7 - - - - 1.8 1.43
4 0.7 - - - - 1.8 1.43
6 0.7 - - - - 1.8 1.43
10 0.7 - - - - 1.8 1.43
16 0.7 - - - - 1.8 1.43
25 0.9 - - - - 1.8 1.43
35 0.9 - - - - 1.8 1.43
50 1 - - - - 1.8 1.43
70 1.1 - - - - 2 1.6
95 1.1 - - - - 2.1 1.69
120 1.2 - - - - 2.3 1.86
150 1.4 - - - - 2.4 1.94
185 1.6 - - - - 2.6 2.11
240 1.7 - - - - 2.8 2.28
300 1.8 - - - - 3 2.45
400 2 - - - - 3.3 2.71

9
Technical Support Section Five Core Power Cable

CU/PVC/SWA/PVC
Insulation (PVC) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)
Size(mm²)
Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires Nominal (mm) Min. (mm)

1.5 0.8 1 0.6 0.9 36 1.8 1.24


2.5 0.8 1 0.6 0.9 40 1.8 1.24
4 1 1 0.6 1.25 35 1.8 1.24
6 1 1 0.6 1.25 39 1.8 1.24
10 1 1 0.6 1.6 35 1.8 1.24
16 1 1 0.6 1.6 40 1.8 1.24
25 1.2 1 0.6 1.6 46 1.9 1.32
35 1.2 1 0.6 2 41 2 1.4
50 1.4 1.2 0.76 2 48 2.2 1.56
70 1.4 1.2 0.76 2 54 2.3 1.64
95 1.6 1.4 0.92 2.5 51 2.5 1.8
120 1.6 1.4 0.92 2.5 55 2.7 1.96
150 1.8 1.6 1.08 2.5 62 2.9 2.12
185 2 1.6 1.08 2.5 68 3 2.2

CU/PVC/PVC
Insulation (XLPE) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)
Size(mm²)
Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires Nominal (mm) Min. (mm)

1.5 0.8 - - - - 1.8 1.43


2.5 0.8 - - - - 1.8 1.43
4 1 - - - - 1.8 1.43
6 1 - - - - 1.8 1.43
10 1 - - - - 1.8 1.43
16 1 - - - - 1.8 1.43
25 1.2 - - - - 1.8 1.43
35 1.2 - - - - 1.9 1.52
50 1.4 - - - - 2 1.6
70 1.4 - - - - 2.2 1.77
95 1.6 - - - - 2.3 1.86
120 1.6 - - - - 2.5 2.03
150 1.8 - - - - 2.6 2.11
185 2 - - - - 2.8 2.28

10
Technical Support Section Five Core Power Cable

CU/XLPE/SWA/PVC
Insulation (XLPE) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)
Size(mm²)
Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires Nominal (mm) Min. (mm)

1.5 0.7 1 0.6 0.9 34 1.8 1.24


2.5 0.7 1 0.6 0.9 38 1.8 1.24
4 0.7 1 0.6 1.25 31 1.8 1.24
6 0.7 1 0.6 1.25 35 1.8 1.24
10 0.7 1 0.6 1.25 41 1.8 1.24
16 0.7 1 0.6 1.6 37 1.8 1.24
25 0.9 1 0.6 1.6 43 1.8 1.24
35 0.9 1 0.6 1.6 48 1.9 1.32
50 1 1.2 0.76 2 45 2.1 1.48
70 1.1 1.2 0.76 2 52 2.3 1.64
95 1.1 1.4 0.92 2.5 48 2.5 1.8
120 1.2 1.4 0.92 2.5 53 2.6 1.88
150 1.4 1.4 0.92 2.5 59 2.8 2.04
185 1.6 1.6 1.08 2.5 65 3 2.2

CU/XLPE/PVC
Insulation (PVC) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)
Size(mm²)
Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires Nominal (mm) Min. (mm)

1.5 0.7 - - - - 1.8 1.43


2.5 0.7 - - - - 1.8 1.43
4 0.7 - - - - 1.8 1.43
6 0.7 - - - - 1.8 1.43
10 0.7 - - - - 1.8 1.43
16 0.7 - - - - 1.8 1.43
25 0.9 - - - - 1.8 1.43
35 0.9 - - - - 1.8 1.43
50 1 - - - - 1.9 1.52
70 1.1 - - - - 2.1 1.69
95 1.1 - - - - 2.2 1.77
120 1.2 - - - - 2.4 1.94
150 1.4 - - - - 2.6 2.11
185 1.6 - - - - 2.7 2.2

11
Three and Half Cores Power Cable
Technical Support Section

CU/XLPE/SWA/PVC

Size(mm²) Insulation (XLPE) Size(mm²) Insulation (XLPE) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)

PH⁰ Nominal (mm) PH⁰ NE⁰ Nominal (mm) NE⁰ Nominal(mm) Min.(mm) size (mm) no.of wires Nominal(mm) Min.(mm)

16 0.7 10 0.7 1 0.6 1.25 41 1.8 1.24

25 0.9 16 0.7 1 0.6 1.6 36 1.8 1.24

35 0.9 16 0.7 1 0.6 1.6 40 1.8 1.24

50 1 25 0.9 1 0.6 1.6 46 1.9 1.32

70 1.1 35 0.9 1.2 0.76 2 43 2.1 1.48

95 1.1 50 1 1.2 0.76 2 48 2.2 1.56

120 1.2 70 1.1 1.2 0.76 2 53 2.4 1.72

150 1.4 70 1.1 1.4 0.92 2.5 48 2.5 1.8

185 1.6 95 1.1 1.4 0.92 2.5 53 2.7 1.96

240 1.7 120 1.2 1.6 1.08 2.5 59 2.9 2.12

300 1.8 150 1.4 1.6 1.08 2.5 65 3 2.2

400 2 185 1.6 1.6 1.08 3.15 59 3.3 2.44

CU/XLPE/PVC

Size(mm²) Insulation (XLPE) Size(mm²) Insulation (XLPE) Bedding (PVC) Armoring (G.Steel) Sheathing (PVC)

PH⁰ Nominal (mm) PH⁰ NE⁰ Nominal (mm) NE⁰ Nominal(mm) Min.(mm) size (mm) no.of wires Nominal(mm) Min.(mm)

16 0.7 10 0.7 - - - - 1.8 1.43

25 0.9 16 0.7 - - - - 1.8 1.43

35 0.9 16 0.7 - - - - 1.8 1.43

50 1 25 0.9 - - - - 1.8 1.43

70 1.1 35 0.9 - - - - 1.9 1.52

95 1.1 50 1 - - - - 2.1 1.69

120 1.2 70 1.1 - - - - 2.2 1.77

150 1.4 70 1.1 - - - - 2.3 1.86

185 1.6 95 1.1 - - - - 2.5 2.03

240 1.7 120 1.2 - - - - 2.6 2.11

300 1.8 150 1.4 - - - - 2.8 2.28

400 2 185 1.6 - - - - 3.1 2.54

12
Technical Support SectionAll Information For Annealed Plain Copper Conductor

Approx. Weight Max conductor Max conductor


Nominal Area No.of Diameter of
of conductor resistance at 20⁰ resistance at 20⁰
(mm²) wires wire (mm) (Kg/Km) (ohm/km) Process (ohm/km) Final

1 7 0.44 8.5 16.92 18


1.5 7 0.53 13 11.37 12.1
2.5 7 0.67 22 6.96 7.41
4 7 0.85 34 4.38 4.61
6 7 1.04 53 2.9626 3.08
10 7 1.35 88 1.7568 1.83
16 7 1.7 142 1.104 1.15
25 7 2.25 225 0.7052 0.727
35 7 2.66 315 0.5083 0.524
50 7 3.05 425 0.3793 0.387
70 19 2.25 605 0.2626 0.268
95 19 2.66 850 0.1891 0.193
120 37 2.13 1060 0.1499 0.153
150 37 2.35 1325 0.1215 0.124
185 37 2.66 1645 0.0971 0.0991
240 37 3 2150 0.0739 0.0754
300 37 3.35 2690 0.0589 0.0601
400 61 3.02 3450 0.0461 0.047
500 61 3.32 4350 0.0359 0.0366
630 61 3.75 5580 0.027734 0.0283
28/2/2010 AMD 1
Technical Support Section All Information For Annealed Plain Copper Conductor

Max conductor
Nominal Area
resistance at 20⁰
(mm²) (ohm/km) Final

1 18
1.5 12.1
2.5 7.41
4 4.61
6 3.08
10 1.83
16 1.15
25 0.727
35 0.524
50 0.387
70 0.268
95 0.193
120 0.153
150 0.124
185 0.0991
240 0.0754
300 0.0601
400 0.047
500 0.0366
630 0.0283
28/2/2010 AMD 1
Technical Support Department All Information For Aluminum Conductor

Approx. Weight Max. conductor Max. conductor


Nominal Area No.of Diameter of
of conductor resistance at 20⁰ resistance at 20⁰
(mm²) wires wire (mm) (Kg/Km) (ohm/km) Process (ohm/km) Final

16 7 1.72 42 1.872 1.910


25 7 2.16 67 1.176 1.200
35 7 2.52 92 0.851 0.868
50 7 3 127 0.628 0.641
70 19 2.16 183 0.434 0.443
95 19 2.54 253 0.314 0.320
120 37 19 2.85 2.07 320 0.248 0.253
150 37 19 3.2 2.3 391 0.202 0.206
185 37 2.54 491 0.161 0.164
240 37 2.92 644 0.123 0.125
300 37 3.29 802 0.098 0.100
400 61 3 1040 0.076 0.078
500 61 3.29 1320 0.059 0.061
630 61 3.75 1738 0.046 0.047
Technicl Support Department
Technical Particulars & Guarantees

Description Unit Proposed Values

Size No. × mm2 4×95


Description - Cu/XLPE/SWA/LSOH
Reference Standard - IEC 60502-1
Maximum Permissible Continuous Conductor Temp. °C 90
Maximum Permissible Continuous Temp. of Outer Sheath °C 90
Rated Voltage V 600 / 1000
Number & Nominal Diameter of Wires No. × mm 19 × 2.66
Shape of Conductor - Sector compacted conductor
Conductor Material - Annealed Copper Class (2)
Insulation Material - XLPE - NORMAL
Average Thickness of Insulation mm 1.10
Core Identification - Red, Yellow, Blue & Black
Inner Sheath Material - PVC
Approximate Thickness of Bedding mm 1.20
Armouring GSWA-(Multi Core),AWA-(Single Core) No. × Dia (mm) 49 × 2.00
Outer sheath Material - PVC ST8 - BLACK
Nominal Thickness of Outer sheath mm 2.30
Approx.Max. DC Resistance at 20 C o
Ω/km 0.1930
Approx.Max. AC Resistance at Maximum Operating
Tempreture Ω/km 0.25

Approx.Inductive Reactance at 50 Hz Ω/km 0.078


Conductor Impedance at Maximum Operating Tempreture Ω/km 0.26
Approx.Current Carrying Capacity at 30 °C in Air (3-Φ)-
Multi Core Amp 305

Approx.C.C.C at (20 °C, 1.0 K m/W, 0.7mt. DOL) in


Ground (3-Φ)- Multi Core Amp 303

Short Circuit Current Rating Based on Max. Cond. Temp. (1-SEC) kA 13.585
Approximate Over all Diameter mm 41.38
Minimum Bending Raduis mm 331
Mass per Kilometer of Complete Cable Kg 5520.59
Nominal Drum Length ± 5% / Drum Type m/Drum 500
EMBOSSING MESSAGE : UNITED CABLE -UCIC- 4×95 SQMM Cu/XLPE/SWA/LSOH 600/1000 V IEC 60502-1 JORDAN (YEAR)
Issued By
Technical Support Department
Eng.Bashar Alwadyan

QP-09/F03 Rev.:1

Das könnte Ihnen auch gefallen