Beruflich Dokumente
Kultur Dokumente
MARINE
COPPER NICKEL PIPES AND PIPE FITTINGS
PIPES
PAGE / 01
FLANGES
PAGE / 63
MACHINED FITTINGS
PAGE / 09
MECH
MARINE
www.mechmarine.com
PIPES
PIPES
PIPES - EUROPEAN STANDARDS
Dimension: DIN/EEMUA
02 MECH
MARINE
www.mechmarine.com
PIPES - U.S. STANDARDS
PIPES
Material: CuNi 90/10
Other dimensions, wall thicknesses and outside diameters as well as all relevant flanges, butt weld and machined
fittings are also available upon request.
MECH 03
MARINE
www.mechmarine.com
BARS & PLATES
HEXAGON BAR
Material: CuNi 90/10
Dimension: DIN 1763
06 MECH
MARINE
www.mechmarine.com
PLATES
MECH 07
MARINE
www.mechmarine.com
BUTT WELD FITTINGS
Page: 14, 15, 16 Page: 17, 18, 19, 20, 22, 23, 24, 25 Page: 20, 21, 23, 25
Page: 26, 27, 30, 32 Page: 28, 29, 31, 33 Page: 34, 35, 36
10 MECH
MARINE
www.mechmarine.com
ELBOWS SHORT RADIUS 10 BAR
R~1D-45° and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
MECH 11
MARINE
www.mechmarine.com
ELBOWS SHORT RADIUS 10 BAR
R~1D-90° and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
12 MECH
MARINE
www.mechmarine.com
ELBOWS LONG RADIUS 10 BAR
R~1,5D-45° and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
MECH 13
MARINE
www.mechmarine.com
ELBOWS LONG RADIUS 16 BAR
R~1,5D-45°
14 MECH
MARINE
www.mechmarine.com
ELBOWS LONG RADIUS 20 BAR
R~1,5D-45°
MECH 15
MARINE
www.mechmarine.com
ELBOWS LONG RADIUS 10 BAR
R~1,5D-90° and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
16 MECH
MARINE
www.mechmarine.com
ELBOWS LONG RADIUS 16 BAR
R~1,5D-90°
MECH 17
MARINE
www.mechmarine.com
ELBOWS LONG RADIUS 20 BAR
R~1,5D-90°
18 MECH
MARINE
www.mechmarine.com
CONCENTRIC REDUCERS 10 BAR
and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
MECH 19
MARINE
www.mechmarine.com
CONCENTRIC REDUCERS 10 BAR
and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
20 MECH
MARINE
www.mechmarine.com
CONCENTRIC REDUCERS 10 BAR
and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
MECH 21
MARINE
www.mechmarine.com
CONCENTRIC REDUCERS 10 BAR
and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
22 MECH
MARINE
www.mechmarine.com
CONCENTRIC REDUCERS 16 BAR
MECH 23
MARINE
www.mechmarine.com
CONCENTRIC REDUCERS 10 BAR
and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
24 MECH
MARINE
www.mechmarine.com
CONCENTRIC REDUCERS 16 BAR
MECH 25
MARINE
www.mechmarine.com
CONCENTRIC REDUCERS 20 BAR
26 MECH
MARINE
www.mechmarine.com
CONCENTRIC REDUCERS 20 BAR
MECH 27
MARINE
www.mechmarine.com
ECCENTRIC REDUCERS 10 BAR
and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
28 MECH
MARINE
www.mechmarine.com
ECCENTRIC REDUCERS 10 BAR
and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
MECH 29
MARINE
www.mechmarine.com
ECCENTRIC REDUCERS 10 BAR
and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
30 MECH
MARINE
www.mechmarine.com
ECCENTRIC REDUCERS 10 BAR
and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
MECH 31
MARINE
www.mechmarine.com
ECCENTRIC REDUCERS 16 BAR
32 MECH
MARINE
www.mechmarine.com
ECCENTRIC REDUCERS 16 BAR
MECH 33
MARINE
www.mechmarine.com
ECCENTRIC REDUCERS 20 BAR
34 MECH
MARINE
www.mechmarine.com
ECCENTRIC REDUCERS 20 BAR
MECH 35
MARINE
www.mechmarine.com
EQUAL TEES 10 BAR
and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
36 MECH
MARINE
www.mechmarine.com
EQUAL TEES 16 BAR
MECH 37
MARINE
www.mechmarine.com
EQUAL TEES 20 BAR
38 MECH
MARINE
www.mechmarine.com
REDUCING TEES 10 BAR
and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
MECH 39
MARINE
www.mechmarine.com
REDUCING TEES 10 BAR
and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
40 MECH
MARINE
www.mechmarine.com
REDUCING TEES 10 BAR
and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
MECH 41
MARINE
www.mechmarine.com
REDUCING TEES 10 BAR
and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
42 MECH
MARINE
www.mechmarine.com
REDUCING TEES 16 BAR
MECH 43
MARINE
www.mechmarine.com
REDUCING TEES 16 BAR
44 MECH
MARINE
www.mechmarine.com
REDUCING TEES 20 BAR
MECH 45
MARINE
www.mechmarine.com
REDUCING TEES 20 BAR
46 MECH
MARINE
www.mechmarine.com
SADDLES 10 BAR
With equal or reduced branch and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
MECH 47
MARINE
www.mechmarine.com
SADDLES 10 BAR
With equal or reduced branch and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
48 MECH
MARINE
www.mechmarine.com
SADDLES 10 BAR
With equal or reduced branch and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
MECH 49
MARINE
www.mechmarine.com
SADDLES 10 BAR
With equal or reduced branch and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
50 MECH
MARINE
www.mechmarine.com
SADDLES 10 BAR
With equal or reduced branch and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
MECH 51
MARINE
www.mechmarine.com
SADDLES 16 BAR
With equal or reduced branch
52 MECH
MARINE
www.mechmarine.com
SADDLES 16 BAR
With equal or reduced branch
MECH 53
MARINE
www.mechmarine.com
SADDLES 16 BAR
With equal or reduced branch
54 MECH
MARINE
www.mechmarine.com
SADDLES 16 BAR
With equal or reduced branch
MECH 55
MARINE
www.mechmarine.com
SADDLES 20 BAR
With equal or reduced branch
56 MECH
MARINE
www.mechmarine.com
SADDLES 20 BAR
With equal or reduced branch
MECH 57
MARINE
www.mechmarine.com
SADDLES 20 BAR
With equal or reduced branch
58 MECH
MARINE
www.mechmarine.com
END CAPS 10 BAR
and 14 Bar
Other dimensions, wall thicknesses and outside diameters are also available upon request.
MECH 59
MARINE
www.mechmarine.com
END CAPS 16 BAR
60 MECH
MARINE
www.mechmarine.com
END CAPS 20 BAR
MECH 61
MARINE
www.mechmarine.com
FLANGES
Flanges
FLANGES
Composite Weld Neck Flanges Composite Weld Neck Flanges Composite Weld Neck Flanges
Inner flanges (DIN) Inner flanges (Short type EEMUA) Inner flanges (Long type EEMUA)
Composite Weld Neck Flanges Composite Weld Neck Flanges Composite Weld Neck Flanges
Outer flanges (ISO) Outer flanges (EEMUA) Outer flanges (ANSI)
Composite blind Flanges Solid Welding Neck Flanges Solid Weld Neck Flanges
(ISO, ANSI) (DIN) (EEMUA, ANSI)
64 MECH
MARINE
www.mechmarine.com
COMPOSITE WELD 10 BAR
NECK FLANGES and 14 Bar
Inner flanges
Material: CuNi 90/10
Other dimensions, wall thicknesses and outside diameters are also available upon request.
MECH 65
MARINE
www.mechmarine.com
COMPOSITE WELD 16 BAR
NECK FLANGES
Short inner flanges type EEMUA
Material: CuNi 90/10
66 MECH
MARINE
www.mechmarine.com
COMPOSITE WELD 20 BAR
NECK FLANGES
Short inner flanges type EEMUA
Material: CuNi 90/10
MECH 67
MARINE
www.mechmarine.com
COMPOSITE WELD 16 BAR
NECK FLANGES
Long inner flanges type EEMUA
Material: CuNi 90/10
68 MECH
MARINE
www.mechmarine.com
COMPOSITE WELD 20 BAR
NECK FLANGES
Long inner flanges type EEMUA
Material: CuNi 90/10
MECH 69
MARINE
www.mechmarine.com
COMPOSITE WELD 10 BAR
NECK FLANGES
Outer Flanges
Material: CuNi 90/10
Other dimensions, wall thicknesses and outside diameters are also available upon request.
70 MECH
MARINE
www.mechmarine.com
COMPOSITE WELD 150 LBS
NECK FLANGES
Outer Flanges
Material: CuNi 90/10
MECH 71
MARINE
www.mechmarine.com
COMPOSITE WELD 150 LBS
NECK FLANGES
Outer Flanges
Material: CuNi 90/10
Other dimensions, wall thicknesses and outside diameters are also available upon request.
72 MECH
MARINE
www.mechmarine.com
COMPOSITE WELD 300 LBS
NECK FLANGES
Outer Flanges
Material: CuNi 90/10
Other dimensions, wall thicknesses and outside diameters are also available upon request.
MECH 73
MARINE
www.mechmarine.com
COMPOSITE BLIND FLANGES 10 BAR
DISCS:
Material: CuNi 90/10
FLANGES:
Material: Carbon steel A105
(Galvanised or epoxy coated
upon request)
Dimension: ISO NP 10
Other dimensions, wall thicknesses and outside diameters are also available upon request.t
74 MECH
MARINE
www.mechmarine.com
COMPOSITE BLIND FLANGES 150 LBS
DISCS:
Material: CuNi 90/10
FLANGES:
Material: Carbon steel A105
(Galvanised or epoxy coated
upon request)
Other dimensions, wall thicknesses and outside diameters are also available upon request.
MECH 75
MARINE
www.mechmarine.com
COMPOSITE BLIND FLANGES 300 LBS
DISCS:
Material: CuNi 90/10
FLANGES:
Material: Carbon steel A105
(Galvanised or epoxy coated
upon request)
Other dimensions, wall thicknesses and outside diameters are also available upon request.
76 MECH
MARINE
www.mechmarine.com
SOLID WELDING 10&16 BAR
NECK FLANGES
Material: CuNi 90/10
Other dimensions, wall thicknesses and outside diameters are also available upon request.
MECH 77
MARINE
www.mechmarine.com
SOLID WELDING NECK FLANGES 16 BAR
78 MECH
MARINE
www.mechmarine.com
SOLID WELDING NECK FLANGES 20 BAR
MECH 79
MARINE
www.mechmarine.com
SOLID WELDING 150 LBS
NECK FLANGES
Material: CuNi 90/10
Other dimensions, wall thicknesses and outside diameters are also available upon request.
80 MECH
MARINE
www.mechmarine.com
SOLID WELDING NECK FLANGES 300 LBS
Other dimensions, wall thicknesses and outside diameters are also available upon request.
MECH 81
MARINE
www.mechmarine.com
SOLID SLIP ON FLANGES 10 BAR
Material: CuNi10Fe1Mn
alloy UNS C70600
CuNi30Mn1Fe
alloy UNS C71500
Other dimensions, wall thicknesses and outside diameters are also available upon request.
82 MECH
MARINE
www.mechmarine.com
SOLID SLIP ON FLANGES 16&20 BAR
Material: CuNi10Fe1Mn
alloy UNS C70600
CuNi30Mn1Fe
alloy UNS C71500
MECH 83
MARINE
www.mechmarine.com
SOLID SLIP ON FLANGES 150 LBS
Other dimensions, wall thicknesses and outside diameters are also available upon request.
84 MECH
MARINE
www.mechmarine.com
SOLID SLIP ON FLANGES 300 LBS
Other dimensions, wall thicknesses and outside diameters are also available upon request.
MECH 85
MARINE
www.mechmarine.com
SOLID BLIND FLANGES 150 LBS
Other dimensions, wall thicknesses and outside diameters are also available upon request
.
86 MECH
MARINE
www.mechmarine.com
SOLID BLIND FLANGES 300 LBS
Other dimensions, wall thicknesses and outside diameters are also available upon request.
MECH 87
MARINE
www.mechmarine.com
MACHINED FITTINGS
Machined Fittings
Machined Fittings
Elbows 45° Elbows 90° Equal Tees
Socket welding or capillary ends Socket welding or capillary ends Socket welding or capillary ends
90 MECH
MARINE
www.mechmarine.com
Machined Fittings
Union Connectors Male Union Connectors Male Union Connectors
Butt welding ends SW or capillary end x Male thread Butt welding ends x Male thread
MECH 91
MARINE
www.mechmarine.com
Machined Fittings
End Caps Hexagonal Nipples Pipe Nipples
Threaded Threaded Threaded
92 MECH
MARINE
www.mechmarine.com
ELBOWS SOCKET WELDING OR
CAPILLARY ENDS
Material: CuNi 90/10
Elbows 45°
Elbows 90°
MECH 93
MARINE
www.mechmarine.com
EQUAL TEES SOCKET WELDING OR
CAPILLARY ENDS
Material: CuNi 90/10
94 MECH
MARINE
www.mechmarine.com
REDUCING TEES SOCKET WELDING OR
CAPILLARY ENDS
Material: CuNi 90/10
MECH 95
MARINE
www.mechmarine.com
COUPLINGS SOCKET WELDING OR
CAPILLARY ENDS
Material: CuNi 90/10
Straight couplings
Half couplings
96 MECH
MARINE
www.mechmarine.com
REDUCING SOCKET WELDING OR
COUPLINGS CAPILLARY ENDS
Material: CuNi 90/10
MECH 97
MARINE
www.mechmarine.com
COUPLINGS THREADED
Straight couplings
Half couplings
98 MECH
MARINE
www.mechmarine.com
REDUCING INSERTS
Capillary x male ends
Other dimensions, wall thicknesses and outside diameters are also available upon request.
MECH 99
MARINE
www.mechmarine.com
REDUCING INSERTS
Male x capillary ends
Other dimensions, wall thicknesses and outside diameters are also available upon request.
100 MECH
MARINE
www.mechmarine.com
UNION CONNECTORS
Other dimensions, wall thicknesses and outside diameters are also available upon request.t
MECH 101
MARINE
www.mechmarine.com
MALE UNION CONNECTORS
102 MECH
MARINE
www.mechmarine.com
FEMALE UNION CONNECTORS
MECH 103
MARINE
www.mechmarine.com
STRAIGHT CONNECTORS
Socket welding or capillary end x Male thread
104 MECH
MARINE
www.mechmarine.com
STRAIGHT CONNECTORS
Socket welding or capillary end x Female thread
MECH 105
MARINE
www.mechmarine.com
Adaptors
106 MECH
MARINE
www.mechmarine.com
SPRINKLER BUSHES & MALE PLUGS
Sprinkler bushes
Male plugs
MECH 107
MARINE
www.mechmarine.com
END CAPS
Female threaded
108 MECH
MARINE
www.mechmarine.com
NIPPLES THREADED
Hexagonal nipples
Pipe nipple
MECH 109
MARINE
www.mechmarine.com
WELDOLETS 16&20 BAR
110 MECH
MARINE
www.mechmarine.com
SOCKOLETS 16&20 BAR
MECH 111
MARINE
www.mechmarine.com
THREADOLETS 16&20 BAR
112 MECH
MARINE
www.mechmarine.com
MECH
MARINE
TEL +65 6278 3666
FAX +65 6273 7956
EMAIL mechma@pacific.net.sg
6, Tuas Avenue 10 Singapore 639130
www.mechmarine.com