Beruflich Dokumente
Kultur Dokumente
a) ASTM A 53
b) ASTM A 106
c) ASTM A 333
d) All of the above
Ans. b
2) What is the mill’s tolerance to be considered for the thickness calculation of smls pipe as per ASME B31.3
a) 12
b) 12.25
c) 12.5
d) None of the above
Ans. c
1) Butt welded fittings (upto 600#) are generally used in which Size range
e) 11/2” & above
f) 2” & above
g) Both a & b
h) None of the above
Ans. b
Ans. b
Ans. b
Ans. c
Ans. c
8) Which of the fluid Service is non-toxic in nature?
a) Category D
b) Category M
c) High Pressure fluid service
d) Normal fluid service
Ans. a
a) hot formed
b) cold formed
c) both a & b
d) none of the above
Ans. b
10) What is the Size range in NPS for ASTM A106 Smls.Pipe
a) 1/8 to 46
b) 1/8 to 44
c) 1/8 to 48
d) None of the above
Ans. c
a) API-602
b) API-600
c) API-609
d) None of the above
Ans. a
a) API-602
b) API-600
c) API-609
d) None of the above
Ans. b
a) BS-5351
b) BS-5352
c) BS-1873
d) API-602
Ans. b
14) What is the dmn.std. for L.B. globe valve?
a) BS-5351
b) BS-5352
c) BS-1873
d) API-602
Ans. c
a) BS-5352
b) BS-1868
c) BS-1873
d) Both a & b
Ans. d
a) BS-5351
b) BS-5352
c) BS-1873
d) None of the above
Ans. a
a) ERW
b) EFW
c) Seamless
d) None of the above
Ans. c
18) Low temp. carbon steel shall be used below which temp. in 0C
a) -20
b) -30
c) -29
d) -40
Ans. c
19) What is the std. used for Welded and seamless wrought steel pipe?
a) ASME B36.10
b) ASME B36.19
c) ASME B16.11
d) ASME B16.9
Ans. a
20) Small bore fitting are covered under which American std.?
a) ASME B36.10
b) ASME B36.19
c) ASME B16.11
d) ASME B16.9
Ans. c
21) Large bore fittings are covered under which American std.?
a) ASME B36.10
b) ASME B36.19
c) ASME B16.11
d) ASME B16.9
Ans. d
a. ASME B16.5
b. ASME B16.47
c. ASME B16.48
d. None of the above
Ans. b
23) _________is used as the fitting material in LTCS for Sizes usually 2” & above
Ans. a
24) _________is used as the fitting material in LTCS for Sizes usually 11/2” & below
Ans. b
a) Gate Valve
b) Globe valve
c) Ball Valve
d) Check Valve
Ans. d
26) What is the dmn.std. for Plug valve?
a) BS-5352
b) BS-5351
c) API-599
d) API-602
Ans. c
27) _________ is the maximum temp. till which Carbon Steel can be used as per B31.3
a) 4200C
b) 4290C
c) 4250C
d) 4270C
Ans. c
28) _________ is the minimum temp. till which Carbon Steel can be used as per B31.3
a) -300C
b) -280C
c) -450C
d) -290C
Ans. d
a) 1
b) 3
c) 6
d) 7
Ans. a
a) Gate Valve
b) Butterfly Valve
c) Ball Valve
d) Globe Valve
Ans. d
a) Full Port
b) Regular Port
c) Soft Seat & Metal Seat
d) All of the above
Ans. d
32) Types of Check Valve:
a) Lift type
b) Swing type
c) Wafer type
d) All of the above
Ans. d
a) Isolating
b) Regulating
c) Non-return
d) None of the above
Ans. a
a) Isolating
b) Regulating
c) Non-return
d) None of the above
Ans. b
35) What is the minimum thickness required for CS pipe which needs PWHT requirement?
a) 18 mm
b) 20 mm
c) 19 mm
d) 21 mm
Ans. c