Beruflich Dokumente
Kultur Dokumente
This form is for Wainscoting Horizontal wall application only. Please use Stair Design Request Form for angled stair walls.
Phone: (888) 460-6324, Fax: (256) 767-2916 or visit us at www.NewEnglandClassic.com By providing the requested design information, we will provide you with a detailed wall panel design, bill of materials list and a price for your project.
Date: __________________________________ Project Name: _______________________________ Project Contact: _________________________________ Address: ______________________________________City_________________State______Zip___________ Daytime Phone: ______________________Fax: _____________________E-mail: _______________________ Dealer Name: ________________________________Dealer Contact: _________________________________
2.
ClassicBeadboard
System Height:
ClassicCottage
System Height: 48 56 Panel Style in Top Tier (Required): Flat Raised
ClassicRustic
System Height: 36 44
3.
ClassicRustic
Species: Only Available in Hand-Scraped Maple Finish: _Unfin. _Natural _ Golden Honey _ W.Chestnut _Cinnamon _Nutmeg _Merlot _Tuscan Coffee *Please continue to page 2 of the Wall Design Request Form to complete your design request. RPX-LT21- 12.23.05
Page 1 of 6
5.
Casing Option(s) (i.e. door & window trim): Please select one (1) option. Please supply appropriate New England Classic CasingPak. (4 system) Owner supplied or already existing casing (REQUIRED - Enter dimensions below.)
T W
STEP 3: Sketch Room Plan and Select Appropriate Project Measuring Guideline.
1. Copy the Design Request & Sketch Sheet for each room. 2. Fill in name of room on each sheet. 3. Please determine project conditions and complete your Project Design in accordance to the Project Measuring Guideline (#) indicated below. If Owner is keeping existing casing. Follow Project Measuring Guideline Example #1 If using New England Classic Casing. Follow Project Measuring Guideline Example #2 If Owner is supplying casing which is not currently installed. Follow Project Measuring Guideline Example #2 If project is in rough framing stage. (No wallboard installed) Follow Project Measuring Guideline Example #3
STEP 4: Submit to New England Classic. Fax all pages to Design Services at (256) 767-2916 or Mail to: New England Classic Attention: Design Services 4145
Parkway
Drive Florence,AL35630 For further assistance Call NEC at: (888) 460-6324
*Please continue to the Wall Design Request Data Chart and Sketch Sheet to complete your design request. RPX-LT21- 12.23.05 Page 2 of 6
Date: _______________________________________
CASING-DIMENSIONS WINDOW REQUIRED IF NEW OR SILL/JAMB REPLACING CASING HEIGHT WIDTH REVEAL
UNIT SIZE
WIDTH
HEIGHT
1 2 3 4 5
*Please make a copy of Wall Design Request & Sketch Sheet for each room. RPX-LT21- 12.23.05
Page 3 of 6
Date: _______________________________________
CASING-DIMENSIONS WINDOW REQUIRED IF NEW OR SILL/JAMB REPLACING CASING HEIGHT WIDTH REVEAL
UNIT SIZE
WIDTH
HEIGHT
1 2 3 4 5
*Please make a copy of Wall Design Request & Sketch Sheet for each room. RPX-LT21- 12.23.05
Page 4 of 6
WIDTH
REVEAL
1
2 '-1 3 /4 " 5'-2 3/4" 3 '-8 1 /2 "
3
HEATER 10'-11"
7'-1"
2'-3"
3'-6"
MEASURE TO EDGE
1'-113/4"
9 '-0 "
HEIGHT 1'-10"
1
2'-6" 5'-7" 3'-0" 3'-6" 2'-10"
3
HEATER 10'-11"
DOOR
6'-6"
2'-4"
9'-0"
RPX-LT21- 12.23.05
Page 5 of 6
2'-10"
2'-6"
3'-0"
3'-0"
5'-3"
2'-10"
3'-8 1/2"
DOOR
WINDOW
WALL
5'-3"
2'-10"
3 '-1 3 /4 "
1. Measure overall length of walls. 2. Measure wall corner(s) to inside edge of rough opening (RO) for windows, doors & other items that could interfere with wall paneling (Do not include switches & outlets). Repeat process for each wall elevation. 3. Measure width of window & door rough openings (RO). 4. Measure sill height from sub floor to inside top edge of sill rough opening. 5. Measure height of rough opening for window & door openings, from sub floor to bottom of header. 6. Enter dimension information into project data chart. 7. Enter future casing width & reveal width to be applied or installed. 8. Sketch project, dimension and label items. 9. See examples below for guidance.
ITEM D = DOOR W = WINDOW H = HEATER O = OTHER UNIT SIZE WINDOW SILL/FRAME CASING -DIM REQUIRED IF NEW OR REPLACING CASING
D 1 2 3 4 5
HEIGHT 1'-10"
W IN D O W O P E N IN G
1
3'-0"
3
1'-10" TO TOP OF WINDOW FRAME 11'-0"
DOOR
6'-6"
3'-0"
2'-4 1/2"
3'-0"
9'-1"
RPX-LT21- 07.13.11
Email: design@newenglandclassic.com
Page 6 of 6