Beruflich Dokumente
Kultur Dokumente
SMR-DM 48V-1800W -B
VOCABULARY
AC Alternating Current
ADC Amps, Direct Current
BTS Base Transceiver Station
℃ Temperature in degrees centigrade
dB Decibel
DC Direct current
EMC Electro Magnetic Compatibility
EN Europe Norm
FCC Federal Communications Commission
℉ Temperature in degrees Fahrenheit
Hz Frequency in hertz
IEC International Elektrotechnical Commission
I/O Input / Output, bi-directional
IP Ingress protection
ISO International Standards Organization
Kg Kilo grams
LED Light emitting diode
Lbs Pounds
mA Milli Amps
MHz Mega Hertz
mm Milli meter
ms Milli second
m/s Meters per second
MTBF Mean time between failure
NS Not Specified
OVP Over voltage protection
RH Relative humidity
VAC Alternating current voltage
VDC Direct current voltage
UL Underwriter’s Laboratories
CONTENTS
1. FEATURES, BENEFITS & DESCRIPTIONS ....................................................4
4. PROTECTION ..................................................................................................9
7. OUTLINE DIMENSIONS.................................................................................13
8. STANDARD (CONTINUED)............................................................................15
9. ENVIRONMENTAL .........................................................................................16
Description
Sunlight’s SMR-DM 48V-1800W -B is a compact and very reliable family of front
end modules offering 1800W at the output. The module can be inserted into 2U
(horizontal) or 3U (vertical) racks, convenient to customers applications. These
UL Listed SMR-DM Series Plug-in modules are rated at 30 Amps for -48VDC
operation. These features afford you the flexibility to meet both today’s power
requirements and future growth as you increase your network demands.
2. Electrical Specifications - Input Parameters
Item Specification/Function Standard/Comment
Number of
Phase/Number of Wire - Single phase/two wire with
grounding wire
Input Voltage
- Nominal voltage - 220V, Single Phase
Efficiency
- >91% (Full Load) At Nominal Line
Input, Rated Output
Voltage, Full Load
Inrush Current
- <12A (peak) Full load cold start,
Nominal line, Rated
output voltage.
IEC1000-3-2: Limits
for harmonic current
emissions.
2. Electrical Specifications - Input Parameters (Continued)
Item Specification/Function Standard/Comment
Start Time Delay(Walk-in)
- 3 ~ 10 seconds Full load, Nominal
line, Rated output
voltage
AC Connector
- Type Sunlight Standard 15ME2
Input Protection(Fuse)
- Type Fuse
- Rating 20A
- Standard UL/VDE approved
- Allocation On Board
GND wiring character Resistance value < 0.1 at current 30A Standard
3. Electrical Specifications - Output Parameters
Item Specification/Function Standard/Comment
Maximum Output Power
- 1800W 60V/30A output
Output Voltage
- Nominal output voltage - 54.3V
- ≦ ±1%
At output
<Sunlight Spec.> : 43.2v,54.3v,57.6v
V − VF voltage, 0-100% load
Equation : × 100%
VF
V : No Load Voltage;
VH: Half Load Voltage
VF: Half Load Voltage
Current Sharing
≦ ±5% of rated output current
3. Electrical Specifications - Output Parameters (Continued)
Item Specification/Function Standard/Comment
Voltage Stability ≦ ±0.6% Include load change
Accuracy and line change
Noise
- Audio band - ≦ 24 dBrnc Connect battery
No Connect battery
- ≦ 40 dBrnc Or ≦ -54.26dbmp
CCITT
- <2mV
<Note> dBmp + 2.5 = 20 Log
(V/0.7746)
- Wide band
- ≦ 20 mVrms (10KHz~100MHz)
- Peak to peak ripple Oscilloscope band
voltage - ≦ 100 mV set to 20 MHz
- ≦ 55dBA
Temperature Coefficient <200PPM
4. Protection
Item Condition Protection
Input
- Power Brown Out - 0~80% Of Rated Input Voltage No damage to SMR
Output
- O/P voltage abnormal - >59.5±0.5V Shut down and latch
Other Protection
- Overtemperature - 95±5℃ (Output-Diode heat sink) Shutdown and restart
(Environment)
C.L.
- Function - Current Limited - The LED lights when the
- Component type - LED output current exceeds
- Color - Yellow 110% (default) of rated
- On condition - Output current is limited. load.
- Off condition - Output current under 110% - The current limited point
of rated load. Output can be programmed by
current is not limited. CSU.
I+, I-
- Function -Output Current Test Points - The I+, I- will send a
voltage value, which can
be transferred, to output
current.
0.1V =1A
FLO
- Function - Float Voltage -Variable Resistor
Adjustment(40-60V) Adjustment
- Increase in clockwise,
decrease in
counterclockwise.
5. Indicators & Adjustment (Continued)
Item Specification/Function Standard/Comment
CL
- Function - Current Limit (30-110%) - Variable Resistor
Adjustment
- Increase in clockwise,
decrease in
counterclockwise
6. Mechanical Specifications
Item Specification/Function Standard/Comment
Width
- Module Case - 3.3" / 83.6mm
Height
- Module Case - 5.2" / 132mm
Depth
- Module Case - 10.35" / 263mm -The dimension does
not include the length
of front panel screw
and rear panel
connector
Weight - 7.26b / 3.3kg
263.0
298.7
83.6 25.2 263.0
ON
CL A
RF
CL
I- I+
AC
O
FL
120.5
132.0
AC
F
ON OF
7.9
12.3
8. Standard
Item Specification/Function Standard/Comment
Safety Mark
- UL/CUL - IEC 950
- TUV/CE - EN 60950
Insulation Resistance
- Input to output>2 MΩ (At Test Condition:
500Vdc) - Humidity 90% R.H.,
- Input to frame ground > 2 MΩ Non condensing, 25℃
(At 500Vdc) condition
- Output to frame ground >2 MΩ - Disconnect the FG
(At 500Vdc) wire from the case
(Input to frame ground)
Withstand voltage
(High Pot) - Input To Output 4242 Vdc 1
Minute (Or 3000 Vac 50Hz
≤30mA)
- Input to Frame Ground 2837 Vdc
1 Minute (Or 2006 Vac 50Hz
≤30mA)
- Output to Frame Ground 707
-For China market,
Vdc 1 Minute (Or 500 Vac 50Hz
1500VDC
≤30mA)
Leakage Current
- <3.5mA
Vibration
- (1) Sine Wave, 5.5 ~ 500Hz,
3.5G acceleration, duration: 30
minutes
- (2) Sine Wave, 10 ~ 55Hz,
0.35mm amplitude, duration: 30
minutes
9. Environmental
Item Specification/Function Standard/Comment
Operation Temperature
- 0℃ ~ +50℃ (32℉ ~ +122℉)
Operation Humidity
- 0 ~ 95% Relative Humidity
(Non-Condensing)
Storage Temperature
- -40℃ ~ +85℃ (-40℉ ~ +185℉)
Storage Humidity
- 0 ~ 95% Relative Humidity
(Non-Condensing)
Altitude
- -152m~3048m (-500~10000
Feet)
10. Life Time
Item MTBF Standard/Comment
Rectifier
- >150K hours At 25℃, rated load
Cooling Fan
- > 5 years
11. Settings and Controls
Setting from CSU
Settings Description Comment
Floating/equalize
charging voltage
- Function - Floating/equalize charging voltage
can be set from CSU
- Setting Window - 53.3VDC-55.3VDC
- Default - 54.3VDC
Current Limited
- Function - Current limited can be set from CSU
- Setting Window - 0-110% , 1% per step
- Default - 110%
Floating/equalize status
- Function - SMR floating/equalize status can be set
through the CSU control.
24 19
VO - 6 1 VO+
Signal
Pin Meaning
1 COM
2 NC
3 ITP1
4 RFA
7 NO
9 IBUS
15 VASJ
16 STDN
20 CLL
21 ICOM
22 I (A/M)