Beruflich Dokumente
Kultur Dokumente
5 qDesigner .................................................................................................................................... 09
table of contents
5.4.2 Insert an Image ...................................................................................................................... 14
6 FAQ ..................................................................................................................................... 30
7 Support ..................................................................................................................................... 30
8 Appendix 1: Setting the Wireless Network Connection of the Q-BiX WINDOWS player.... 31
9 Appendix 2: Setting the Wireless Network Connection of the Q-BiX LINUX Player .... 32
www.qbixsignage.com 03
02 Network Environment
PC
Q-Bix
designer
software
qDesigner.exe
NETWERK
NETWORK
Network Environment
qPlayer.exe
Q-Bix
Digital
signage
player
qScheduler.exe
HDMI-DVI
LCD
Screen
Digital
signage
output
04 To learn more about Q-Bix digital signage and the rest of the product range, Visit us online...
03 Quick guide – software installation
3.1 qDesigner
STEP 1 STEP 5
STEP 2
STEP 3
STEP 6
Klick ‘Run’
STEP 4
Choose the location where you want the system files to be installed.
It is, however, recommended that you do not change the ‘Destination
folder’ that is indicated by default.
Klick ‘Next’
www.qbixsignage.com 05
STEP 7 STAP 9
Quick guide – software installation
Choose the name of the folder which will appear in your The installer installs all of the required components.
START menu. It is again recommended that you retain the
default notation. Then click ‘Next’.
STEP 8 STAP 10
The installation requires the installation of a Runtime component. Click ‘Finish’ to complete the installation.
Check the box to allow this and then click ‘Install’.
06 To learn more about Q-Bix digital signage and the rest of the product range, Visit us online...
3.2 qPlayer & qScheduler
These files have already been installed on the player by your product dealer.
Please contact your dealer if you experience any problems with these components.
www.qbixsignage.com 07
04 Quick guide – HARDWARE installation
STEP 1
STEP 2
Screw the wireless antenna onto the back of the Q-BiX player (18).
STEP 3
Connect your LAN connection to the back of the Q-BiX player (13).
STEP 4
Connect your DVI or HDMI connection to the back of the Q-BiX player (15 or 16).
Quick guide – HARDWARE installation
STEP 5
Connect the power supply to the back of the Q-BiX player (17).
STEP 6
Turn on the Q-BiX player using the switch located on the front of it. (3).
18
3
1 2
16 17
10 15
11 12 13 14
8 9
6 7
4 5
08 To learn more about Q-Bix digital signage and the rest of the product range, Visit us online...
05 Quick guide – QDESIGNER
Before you start using the software, you need to be aware of a few of the terms used:
A project is a collection (playlist) of layouts. When a project has been completed, it will be sent
Project
in its entirety to the player.
A layout is one 'slide' within your project. It is possible to add multiple layouts to the same
Layout
project.
An asset is an 'object' (e.g. text, video, image...) within a layout. The number of assets within a
Asset
layout is infinite.
The entire tree-like structure (project, layout and assets) of your project can be viewed in your ‘Project Browser’.
QDESIGNER
www.qbixsignage.com 09
5.1 Start the Software
You can use the software by clicking on ‘Start’, ‘All Programs’, ‘Q-BiX’ and ‘qDesigner’. The software will then run and open up the window
depicted on the previous page:
QDESIGNER
10 To learn more about Q-Bix digital signage and the rest of the product range, Visit us online...
5.2 Create a New Project
In the software’s main window, select ‘Create New Project’ from the ‘Project’ menu. A dialog box will then appear:
QDESIGNER
Choose a project name and set your preferred width, height and background color. Then click ‘OK’.
In the dialog box, define a layout name, background color and running time (= slide).
www.qbixsignage.com 11
5.4 Add Assets to Your Layout
TAB ‘BASIC’
Name the text box here. Note: this is not the text that will be shown in your
Object name
layout.
Text Enter the text that you want to display in your layout.
Geometry Define the position, height and width of the text box.
QDESIGNER
TAB ‘APPEARANCE’
Area Fill Color Define the background color of your text box here.
Area Fill
Define the transparency of your background.
Opacity
Text Alignment Define the alignment (left, centre, right) of the text inside the text box.
12 To learn more about Q-Bix digital signage and the rest of the product range, Visit us online...
TAB ‘ADVANCED’
Reflection Define the setting for the reflection of your text box.
Reflection
Define the distance between the text box and its reflection.
Distance
Fading Out
Define the fade-out effect of your text box.
Reflection
Scrolling
Define the direction of your banner.
direction
QDESIGNER
www.qbixsignage.com 13
5.4.2 Insert an Image
Select the image asset in the asset browser.
Drag this asset to your layout.
Double-click on the image box to open
the properties menu.
TAB ‘BASIC’
Geometry Define the position, height and width of your image object.
QDESIGNER
TAB ‘APPEARANCE’
Area Fill Color Define the background color of your image here.
Define the position of your image within your image object (scale to item
Scale Mode
area; keep aspect ratio; do not scale).
Mask image
Browse to the image you want to set as the mask.
source
14 To learn more about Q-Bix digital signage and the rest of the product range, Visit us online...
TAB ‘ADVANCED’
Reflection
Define the distance between the image object and its reflection.
Distance
Fading Out
Define the fade-out effect of your image object.
Reflection
QDESIGNER
www.qbixsignage.com 15
5.4.3 Insert a Video
Select the video asset in the asset browser.
Drag this asset to your layout.
Double-click on the video asset
to open the properties menu.
TAB ‘BASIC’
Geometry Define the position, height and width of your video object here.
QDESIGNER
TAB ‘APPEARANCE’
Area Fill Color Define the background color of your video object here.
Define the position of your video within your video object (scale to item
Scale Mode
area; keep aspect ratio; do not scale).
Mask image
Browse to the video you want to set as the mask.
source
(1)
= the Q-BiX player has no internal speakers. You can get sound by connecting the Q-BiX player to external
speakers, amplifiers, etc.
16 To learn more about Q-Bix digital signage and the rest of the product range, Visit us online...
TAB ‘ADVANCED’
Reflection
Define the distance between the video object and its reflection.
Distance
Fading Out
Define the fade-out effect of your video object.
Reflection
QDESIGNER
www.qbixsignage.com 17
5.4.4 Insert a Clock
TAB ‘BASIC’
Analog clock skin Define the background of your analog clock from the options list.
Time Zone Set the time zone where you are located.
Geometry Define the position, height and width of your clock object.
QDESIGNER
Area Fill Color Define the background color of your clock object.
Area Fill Opacity Define the transparency of the background color of your clock object.
Font Define the font of the number representations around your clock object.
Font Color Define the color of the number representations around your clock object.
Alignement Define the alignment (left, centre, right) of the clock inside the clock object.
18 To learn more about Q-Bix digital signage and the rest of the product range, Visit us online...
TAB ‘ADVANCED’
Reflection
Define the distance between the clock object and its reflection.
distance
Fading out
Define the fade-out effect of your clock object.
reflection
QDESIGNER
www.qbixsignage.com 19
5.4.5 Insert a Playlist
A new layout window will then appear, enabling you to again add one or more assets.
To add more layouts to your playlist, right-click on Add Playlist’, which is in the area below the playlist screen. A new dialog box will then appear.
The example set out below depicts the structure of our main layout, containing a playlist asset with three playlist layouts.
20 To learn more about Q-Bix digital signage and the rest of the product range, Visit us online...
5.4.6 Insert a Website
TAB ‘BASIC’
URL Enter the link to the referring website that you want to highlight.
Geometry Define the position, height and width of your website object.
QDESIGNER
TAB ‘ADVANCED’
Reflection
Define the distance between the website object and its reflection.
distance
Fading out
Define the fade-out effect of your website object.
reflection
www.qbixsignage.com 21
5.5 Take a Look at a Preview
If you want to see what you have created before sending it to your player(s), the menu gives you the option to see a preview of your project.
If you click on the Preview button, a dialog box will open and display your project.
To leave the preview, click on the Close button in the top right corner of the dialog box.
At the top of the software’s interface you will find a timeline as set out here.
22 To learn more about Q-Bix digital signage and the rest of the product range, Visit us online...
This timeline can be used to limit the lifespan of certain assets in your layout.
QDESIGNER
- Define the duration (Time) of your clock.
- In the example above the duration of the clock is 10 seconds.
- Then choose between ‘Invisible’ and ‘Visible’ in the ‘Make Asset’ drop list.
o When you select ‘invisible’, the clock will disappear after 10 seconds.
o When you select ‘visible’, the clock will appear after 10 seconds.
www.qbixsignage.com 23
5.7 Send Your Project to the Player
Click Displays, then Configure Displays to make one or more Klik op Scan…
connections to the available players.
Een nieuw venster verschijnt, de designer zoekt
A dialog box will appear. naar (een) beschikbare player(s).
QDESIGNER
You can also send the same layout to several players by selecting
multiple players when you conduct the scan.
24 To learn more about Q-Bix digital signage and the rest of the product range, Visit us online...
5.7.2 Linking a Project to a Player
A new window will appear which enables you to upload a project you have saved to the player.
QDESIGNER
Click ‘Add’ and select the saved project. Click OK.
www.qbixsignage.com 25
Then, select the beginning and end date + time for the project. You Select the project and click the Upload button.
must define the duration of your project here. Then click OK.
You can upload several projects with different time definitions to one or more players by
adding multiple projects in the ‘Schedule Editor’ window.
When the box ‘Updated’ is checked, the project has been successfully sent to the player.
26 To learn more about Q-Bix digital signage and the rest of the product range, Visit us online...
5.7.3 Planning/Scheduling a Project
QDESIGNER
To send an extra project to be played at a later time, open your saved ‘Schedule’ with the ‘Load’ button in the Schedule Editor.
www.qbixsignage.com 27
You can then add a project by clicking the ‘Add Project’ button.
QDESIGNER
Then select the start and end date + time for the project. You can also define the duration of your project here.
When a second project has been added to the ‘Schedule’, you can click ‘Upload’ again to send both projects.
Save your ‘Schedule’ for later use.
28 To learn more about Q-Bix digital signage and the rest of the product range, Visit us online...
5.8 Checking for Updates
A dialog box will appear. Select the latest update and click Install Updates.
The new updates will be installed and the older version of the software deleted.
QDESIGNER
www.qbixsignage.com 29
6 FAQ
My display shows the message ‘No Input’.
Æ Check whether the Q-BiX player is on. You can do this by checking the status of the green light on the front of the player. If the light is off, please
turn your player on.
Æ Contact your dealer if the default password ‘qbix’ does not work.
Æ Turn the Q-BiX player on again using the switch on the front of the player. The presentation should re-appear after a few minutes.
When I schedule a project to start at a later point in time, my current presentation disappears.
Æ When you send a new presentation through the Schedule Editor, all current presentations have to be sent as well. It is also important to always
save your ‘Schedule’ using the ‘Save’ button in the Schedule Editor (see also Section 5.7.3 in this manual).
FAQ - SUPPORT
When I run a scan for available players, I see more players than are actually present.
Æ When a player is linked to the network, whether via a wired or a wireless connection, it appears twice in the results of the scan, with a different
IP address on each occasion.
Æ Normally, the most common codecs will have already been installed on the player. If, however, a video does not play, it is likely that the codec
which supports it is missing. In these circumstances, please contact your dealer.
Æ Check the firewall settings of your computer. The firewall settings of your player have been set correctly. Note that it is important that port
10233 is open.
7 SUPPORT
You can contact the Q-BiX Help Desk by sending an email to helpdesk@qbixsignage.com
30 To learn more about Q-Bix digital signage and the rest of the product range, Visit us online...
8 Appendix 1: Setting the Wireless Network Connection of the Q-BiX WINDOWS Player
STeP 1
STeP 2
Connect a USB keyboard and a USB mouse to the USB ports (11) at the back of the Q-BiX player.
STeP 3
Press Ctrl+Alt+Del, then click Start Task Manager and select the ‘Processor’ tab.
STeP 4
Click ‘qScheduler.exe and then ‘End Process’. Click ‘End Process’ again when your computer asks for confirmation.
STeP 5
APPENDIX 1
You will now enter a Windows environment. Select ‘Start’, Configuration Panel, Network Centre’ and select ‘Open or Close a Connection’.
STeP 6
Select the desired network, provide a security password when required and activate your chosen wireless network. Contact your network
administrator to obtain the security password.
STeP 7
Click again on ‘Start’, All Programs, Q-BiX and qScheduler.exe to make your player active again.
www.qbixsignage.com 31
9 Appendix 2: Setting the Wireless Network Connection of the Q-BiX LINUX Player
STeP 1
STeP 2
Connect a USB keyboard and a USB mouse to the USB ports (11) at the back of the Q-BiX player.
STeP 3
Press Alt+F1 and then click on the WINDOWS key + E to switch to the desktop.
STeP 4
You are now in a Linux environment. Select ‘System’, ‘Preferences’, ‘Network Connections’.
STeP 5
APPENDIX 2
Select the desired network, provide a security password when required and activate your chosen wireless network. Contact your network
administrator to obtain the security password.
STeP 6
32 To learn more about Q-Bix digital signage and the rest of the product range, Visit us online...
© 2010 Q-Bix. All rights reserved. The Q-Bix logo and all Q-Bix slogans are trademarks or registered trademarks of VSV international in Europe and/or other countries. All other company and product names are for
identification purposes only and may be trademarks of their respective owners.
Contact Helpdesk
info@qbixsignage.com Helpdesk@qbixsignage.com
www.qbixsignage.com