Beruflich Dokumente
Kultur Dokumente
AIM:
The main aim of the project is to detect the presence of the mobile phone even if
it is in silent mode.
PURPOSE:
The purpose of the project is to sense the presence of an activated mobile phone
from a distance of one and half meters. So it can be used to prevent use of mobile phones
in examination halls, confidential rooms etc.
METHODOLOGY:
BLOCKDIAGRAM:
POWER SUPPLY:
It detects both incoming , outgoing calls, sms and video transmission even if
mobile in silent mode.the moment the bug detects RF tx signal from an activated mobile
phone and it starts sounding a beep alarm and led blinks .the alarm continues until the
signal tx ceases.
When the mobile phone signal is detected by C3 the OUTPUT OFic1 becomes
high and low alternatively according to the frequency of the signal indication by led1.
this triggers monostable multivibrator IC2.
SOFTWARES:
1. Embedded C
2. Keil IDE
3. Uc-Flash
HARDWARES:
1. Power Supply
2. IC CA3130
3. IC NE 555
4. BUZZER
5. ANTENNA
RESULT:
Hence by using this project we can implement mobile bug using operational amplifier
and monostable multivibrator.