Beruflich Dokumente
Kultur Dokumente
PUBLICATION: 17A-02-5BEx
ISSUE No. & DATE: 1 4/06
Registered Company: Thorn Security Ltd. Registered Office: Dunhams Lane Letchworth Garden City Hertfordshire SG6 1BE
800 SERIES
17A-02-5BEx
1 4/06
L -ve IN/OUT
11.5 L1 +ve IN/OUT
0.5
125.6 L2 Not connected
1.3 CABLING
Fig. 2 Overall Base Dimensions
Cables are to be selected in accordance with Publication
17A-02-D. Only Two loop connections L and L1 are
Material provided on the base itself, the input and output connection
Base: FR110 ‘BAYBLEND’ being made at the same terminal. The monitoring system
Flame Retardant will allow ‘teed’ or ‘spur’ junctions which may be used to
Base Contacts: Stainless steel/Nickel plated simplify the installation cabling. However, a maximum of
two 1.5mm2 cables may be connected at any one
Base screws: Steel/Zinc plated terminal. End of line devices are not required on addressed
circuits, see Fig. 3 and Fig. 4.
Weight
It is suggested that the he loop cable should be run in a
Base: 0.064kg metal cable tray and the cable secured with metal fastners at
approximately half metre intervals.
Environmental
Operating Temperature: -25°C to +70°C (+90°C for
short periods)
Storage Temperature: -40°C to +80°C
Relative Humidity: 95% non-condensing
-
+
MX +
CONTROLLER
L1 L1 L1
- L L
L2 L2 L 5BEx L2
5BEx 5BEx
R BASE R BASE R BASE
M M
TO +VE
TERMINAL
L1
L1 L1
L
L L2 L2
5BEx 5BEx
R BASE R BASE
PAGE 2 of 8
EQUIPMENT: 800 SERIES
PUBLICATION:
17A-02-5BEx
ISSUE No. & DATE:
1 4/06
Registered Company: Thorn Security Ltd. Registered Office: Dunhams Lane Letchworth Garden City Hertfordshire SG6 1BE
800 SERIES
17A-02-5BEx
1 4/06
163 SEALING
GASCKET
144 P.C.D FIXING CENTRE
76 P.C.D. FIXING CENTRE
CONDUIT KNOCKOUT
TO SUIT O20 OR
O25 GLAND
4 POSITIONS
25mm
131.94
2 HOLES O5
PAGE 4 of 8
EQUIPMENT: 800 SERIES
PUBLICATION:
17A-02-5BEx
ISSUE No. & DATE:
1 4/06
TERMINAL SCREWRIVER
ADDRESS
LABEL
AFFIXED
HERE
Registered Company: Thorn Security Ltd. Registered Office: Dunhams Lane Letchworth Garden City Hertfordshire SG6 1BE
800 SERIES
17A-02-5BEx
1 4/06
DUST COVER
(SUPPLIED AS PART
OF DETECTOR
REMOVAL KIT)
SLIDERS
UP
The metal slides are retained by wing nuts and are used in Height: 40.5mm
two positions, fully up and fully down. In the fully up Width: 145.5mm
position, it is used to remove/replace a detector. In the fully Depth: 145.5mm
down position, it is used to remove the dust cover and to Weight: 0.062kg
engage the temporary park plunger.
Material
Body: 3mm Polycarbonate
Sliders/Wing Nuts: Stainless Steel
Fig. 13
PAGE 6 of 8
EQUIPMENT: 800 SERIES
PUBLICATION:
17A-02-5BEx
ISSUE No. & DATE:
1 4/06
Electrical Characteristics:
Current consumption at 37.5V dc:
Standby Alarm
0.0mA 3.0mA
Dimensions (HWD):
Assembly: 85 x 85 x 38mm
Electrical Characteristics:
Current consumption:
Standby: 0
Alarm: 5mA
Registered Company: Thorn Security Ltd. Registered Office: Dunhams Lane Letchworth Garden City Hertfordshire SG6 1BE
800 SERIES
17A-02-5BEx
1 4/06
-VE
+VE
+VE
-VE
5BEx 5BEx
MX
CONTROLLER
+ + M1 M2 M3 M4
1 2 3 4 5 6
7.5k
0,25 W
5%
PAGE 8 of 8