Beruflich Dokumente
Kultur Dokumente
ANALYSIS OF EXISTING
45m SQUARE SELF-SUPPORT TOWER
Client :
DiGi Telecommunication Sdn. Bhd.
Lot 10, Jalan Delima 1/1,
Subang Hi-Tech Industrial Park,
40000 Shah Alam,
Selangor Darul Ehsan.
1
DIGI SENAI AIRPORT N550-REV.0
TABLE OF CONTENTS
2.0 INTRODUCTION
8.0 RECOMMENDATIONS
9.0 CONCLUSIONS
10.0 APPENDIX
REVISIONS
2
DIGI SENAI AIRPORT N550-REV.0
LeBLANC Communications (Malaysia) Sdn. Bhd. (LCM) is pleased to submit this “Tower
Structural Analysis Report” to determine the structural integrity of the aforementioned tower.
The purpose of this analysis is to determine the suitability of the tower and foundation under the
proposed swap of existing loading and new additional loading condition. The existing loading has
been determined by a physical site visit and the proposed loading was provided by DIGI. All
loading considered in this analysis are as shown in Table 3.2 of this report. This analysis has been
performed in accordance with the requirements of BS8100: Part 1: 1986, “Code of Practice for
Loading - Lattice Towers and Masts” based on a 3-second gust wind speed of 120km/hr.
Based on our analysis, we have determined that the tower IS NOT CAPABLE of supporting the
existing and proposed loading, with a maximum utilization members capacity of more than 100%.
It is recommended that the remedial action suggested in the inspection report be carried out to bring
this tower into industry standard condition.
All proposed equipment/loadings, if any, shall be installed in accordance with the instructions
included in this report. Any deviation in the size and location of any equipment/loadings to be
installed, as noted in this report, shall be reported back to LCM for review.
We at LCM appreciate the opportunity of providing our continuing professional services to you at
DIGI. If you have any questions or need further assistance on this matter or any other projects,
please feel free to contact us at your convenience.
3
DIGI SENAI AIRPORT N550-REV.0
2.0 INTRODUCTION
At the request of DIGI, LeBLANC Communications (Malaysia) Sdn. Bhd. (LCM) has carried out
the following structural analysis for the 45m square self support tower referenced in this report.
The general scope of this report includes, but is not limited to, a description of the existing tower,
condition of the tower, location and size of all existing antennas and associated transmission lines
and the analysis of this structure under the loading conditions and standards as prescribed by the
client. The tower inspection was done by Dancom on 14th June 2010 and handed over to LCM for
analysis purposes.
The intent of the inspection and analysis is to determine the existing and proposed condition of the
structure, the capability of the structure to support its existing loading and to determine the capacity
to support proposed and/or future loading.
This analysis has been performed in accordance with the requirements of BS8100: Part 1: 1986,
“Code of Practice for Loading - Lattice Towers and Masts”, based on a 3-second gust wind speed
of 120km/hr.
Existing Antennas
No. Elevation Leg/Face Qty Antenna Description
1 45.0 m A 2 GSM Panel Antenna
2 33.0 m A 1 Solid Parabolic Ø0.6m
3 32.0 m A 2 Solid Parabolic Ø0.6m
4 27.0 m A 1 GSM Panel Antenna
5 21.0 m A 2 Solid Parabolic Ø0.6m
6 20.0 m A 1 Solid Parabolic Ø0.6m
7 19.0 m A 1 Solid Parabolic Ø0.3m
8 45.0 m B 1 Solid Parabolic Ø1.8m
9 39.0 m B 1 GSM Panel Antenna
4
DIGI SENAI AIRPORT N550-REV.0
The above information has been determined from a site visit performed by Dancom on June 14,
2010.
5
DIGI SENAI AIRPORT N550-REV.0
Based on the results provided by Dancom based on tower inspection on June 14, 2010 performed
by them, it has been determined that this structure requires maximum maintenance to bring it up to
industry standard condition. In general, the findings of their inspection indicate that the tower and
associated equipment requires routine maintenance to control corrosion and secure structural
connections and equipment fasteners. Therefore, it is recommended to replace the badly corroded
bolts to a new one to maintain its connection strength for future years.
At the request of the client, this analysis report considers the tower in its existing condition with its
existing compliment of antennas, lines and appurtenances, as well as the proposed equipment as
prescribed by DIGI. The tower has been analysed under the following climatic conditions and
design standards as per the client’s request:
Since this tower is square in cross-section, the wind loading has been applied from all directions
from 0 to 360 degrees in increments of 45 degrees to cover the worst case conditions.
The analysis was performed by the use of MStower V6.0 computer program developed by
Engineering Systems Pty Ltd. Computer input and partial output printouts are included in
Appendix of this report.
6
DIGI SENAI AIRPORT N550-REV.0
In general this tower has been shown to be within acceptable stress levels with the exception of the
following:
At the analysis wind speed of 22mps MEAN, the maximum antenna deflection is 0.58° which is
smaller than 1.0˚.
Therefore, the tower MEETS the deflection criteria under the existing loading conditions at wind
speed of 22mps MEAN.
7
DIGI SENAI AIRPORT N550-REV.0
In general this tower has been shown to be within acceptable stress levels with the exception of the
following:
At the analysis wind speed of 22mps MEAN, the maximum antenna deflection is 0.66° which is
smaller than 1.0˚.
Therefore, the tower MEETS the deflection criteria under the existing loading conditions at wind
speed of 22mps MEAN.
8
DIGI SENAI AIRPORT N550-REV.0
The following stress levels and performance characteristics were obtained under maximum design
loading conditions assuming the tower is in good, undamaged, non-corroded condition. These
values are shown in the “PRE” columns. If any strengthening of the tower is required, the stress
levels in the new tower configuration are shown in the “POST” columns. The “POST” columns
will remain blank if no tower strengthening is required.
Therefore, the tower will have adequate strength for proposed loading conditions after carry out
strengthening work.
At the analysis wind speed of 22mps MEAN, the maximum antenna deflection is 0.72° which is
smaller than 1.0˚.
Therefore, the tower MEETS the deflection criteria under the existing loading conditions at wind
speed of 22mps MEAN.
9
DIGI SENAI AIRPORT N550-REV.0
Based on the site visit inspection foundation sketch drawing and soil investigation report, we have
performed an assessment on the foundation stability due to the existing loading plus tower
condition. The geometry of the foundation was measured on site, after excavation works. There are
4 isolated footing, square pad of 3.60m x 3.60m x 0.6m and small square pier of 0.70m x 0.70m x
2.0m.
Based on some assumptions made, the results of this assessment are as indicated below:
The existing foundation as described in the foundation and soil exploration slightly IS NOT
CAPABLE to support the reaction listed on the table above in terms of its soil bearing capacity.
10
DIGI SENAI AIRPORT N550-REV.0
The existing foundation as described in the foundation and soil exploration IS NOT CAPABLE to
support the reaction listed on the table above in terms of its soil bearing capacity.
The existing foundation as described in the foundation and soil exploration IS NOT CAPABLE to
support the reaction listed on the table above in terms of its soil bearing capacity.
11
DIGI SENAI AIRPORT N550-REV.0
8.0 RECOMMENDATIONS
1. Some leg members has to be strengthen to increase its capacity by adding new face
redundant size L50x50x5 and connected with 1-M16 bolt at each end.
2. Existing foundation need to be strengthened by enlarging the pad.
3. It is recommended to replace all the badly corroded bolts to a new one to maintain its
connection strength for future years.
4. For the foundation connection, the holding down bolts are not visible due to possible
concrete covering. However the leg connection with the foundation requires scrapping and
painting to prevent rusting and / or deterioration in quality.
5. It is also recommended that the remedial action suggested in the inspection report be carried
out to bring this tower into industry standard condition.
9.0 CONCLUSIONS
1. The results of the tower analysis indicate that the structure IS NOT CAPABLE of
supporting the existing and proposed loadings based on ultimate wind loading. Therefore,
we have made a recommendation that the tower will have an adequate strength after carry
out the proposed strengthening on the overstress members. The new stress level after
strengthening work as stated in the Table 6.3.1 in the Post column, is acceptable because the
proposed antenna was considered at the maximum height.
2. The foundation IS NOT CAPABLE to support the existing and proposed loading
conditions of the tower based on the service condition of the wind loading by considering
the partial safety factor for wind load, = 1.0. Therefore, the recommended foundation
strengthening will increase the foundation capacity.
3. However, the tower deflection is adequate to sustain the existing and proposed loadings
criteria based on the service condition of the wind loading by considering the partial safety
factor for wind load, = 1.0.
4. LeBLANC Communications (Malaysia) Sdn. Bhd. (LCM) engineers would like to point
out that any rearrangement of antenna location that has been considered in this analysis
might cause overstressing situation to existing tower members. Comments and checks
provided in this report are valid for antenna types and locations as indicated in this report
only.
5. The Aviation Lights are not functioning.
6. Lightning Arrestor is considered in good condition.
12
DIGI SENAI AIRPORT N550-REV.0
10.0 APPENDICES
13
DIGI SENAI AIRPORT N550-REV.0
14
DIGI SENAI AIRPORT N550-REV.0
15
DIGI SENAI AIRPORT N550-REV.0
PROFILE
FACES 4
WBASE 6.000
RLBAS 0.0000
$ MODULE 1
PANEL 1 HT 0.850 TW 1.20
FACE K LEG 1 BR1 0 H1 103
BOLT BR 1 M16-8 H 1 M16-8 PB 1 M16-8
PANEL 1 HT 3.000
FACE XH1 LEG 1 BR1 104 H1 103
BOLT BR 1 M16-8 H 1 M16-8 PB 1 M16-8
$ MODULE 2
PANEL 2 HT 3.000
FACE XH1 LEG 1 BR1 104 H1 103
BOLT LEG 6 M16-82 BR 1 M16-8 H 1 M16-8
PANEL 2 HT 3.000
FACE XH3A LEG 1 BR1 104 H1 103 R1 101 R2 101 R3 0 R4 0
BOLT BR 1 M16-8 H 1 M16-8 R 1 M16-8
PANEL 2 HT 1.500
FACE M LEG 1 BR1 104 H1 0
BOLT LEG 6 M16-82 BR 2 M16-8 R 1 M16-8
$ MODULE 3
PANEL 3 HT 1.500 TW 1.20
FACE K2A LEG 2 BR1 105 H1 105 R1 101 R2 101 R3 101 R4 101
BOLT LEG 6 M16-82 BR 1 M16-8 H 2 M16-8 R 1 M16-8
$ MODULE 4
PANEL 4 HT 3.000
FACE M1 LEG 2 BR1 107 H1 0 R1 101 R2 101
BOLT BR 2 M16-8 BR 2 M16-8 H 1 M16-8 R 1 M16-8
PANEL 4 HT 3.000
FACE K1 LEG 2 BR1 107 H1 105 R1 101 R2 101 R3 0
PLAN PL2 PB1 0 PB2 103 PB3 0 PB4 0
$HIP HS ND 1 HP1 0 HP2 808
BOLT LEG 6 M16-82 BR 2 M16-8 PB 1 M16-8 H 1 M16-8 R 1 M16-8
$ MODULE 5
PANEL 5 HT 3.000
FACE M1 LEG 2 BR1 107 H1 0 R1 101 R2 101
$HIP HS ND 1 HP1 0 HP2 809
BOLT BR 2 M16-8 R 1 M16-8 HP 1 M16-8
PANEL 5 HT 3.000
FACE K1 LEG 2 BR1 107 H1 105 R1 101 R2 101
PLAN PL2 PB1 0 PB2 105 PB3 0 PB4 0
$HIP HS ND 1 HP1 0 HP2 810
BOLT LEG 6 M16-82 BR 2 M16-8 PB 1 M16-8 R 1 M16-8 H 1 M16-8
$ MODULE 6
PANEL 6 HT 3.000
FACE M1 LEG 2 BR1 107 H1 0 R1 101 R2 101
$HIP HS ND 1 HP1 0 HP2 811 $ hip brace missing
BOLT BR 2 M16-8 R 1 M16-8 HP 1 M16-8
PANEL 6 HT 3.000
FACE K1 LEG 2 BR1 107 H1 105 R1 101 R2 101
16
DIGI SENAI AIRPORT N550-REV.0
PLAN PL2 PB1 0 PB2 105 PB3 0 PB4 0
$HIP HS ND 1 HP1 0 HP2 812
BOLT LEG 6 M16-82 BR 2 M16-8 PB 1 M16-8 R 1 M16-8 HP 1 M16-8
$ MODULE 7
PANEL 7 HT 3.000
FACE M1 LEG 3 BR1 107 H1 0 R1 103 R2 103
$HIP HS ND 1 HP1 0 HP2 814
BOLT BR 2 M16-8 R 1 M16-8 HP 1 M16-8
PANEL 7 HT 3.000
FACE K1 LEG 3 BR1 107 H1 107 R1 103 R2 103
PLAN PL2 PB1 0 PB2 107
$HIP HS ND 1 HP1 0 HP2 814
BOLT LEG 8 M20-82 BR 2 M16-8 PB 1 M16-8 R 1 M16-8 H 1 M16-8
$ MODULE 8
PANEL 8 HT 3.000
FACE M1 LEG 3 BR1 107 H1 0 R1 103 R2 103
$HIP HS ND 1 HP1 0 HP2 815
BOLT BR 2 M16-8 R 1 M16-8 HP 1 M16-8
PANEL 8 HT 3.000
FACE KTR F1 0.5 LEG 3 BR1 107 H1 107 R1 103 R2 103 R3 103
PLAN PL2 PB1 0 PB2 107 PB3 0 PB4 0
$HIP HS ND 1 HP1 0 HP2 816
BOLT LEG 8 M20-82 BR 2 M16-8 PB 1 M16-8 R 1 M16-8 H 1 M16-8
END
SECTIONS
LIBR L:LCM IFACT 0.1 $ 1.00
$ LEG
1 EA90X90X7 FY 250 CONNECT C BH 22
2 EA100X100X10 FY 250 CONNECT C BH 22
3 EA130X130X12 FY 250 CONNECT C BH 22
$ BRACINGS
101 EA50X50X5 FY 245 CONNECT L BH 18
102 EA50X50X6 FY 245 CONNECT L BH 18
103 EA65X65X5 FY 245 CONNECT L BH 18
104 EA65X65X6 FY 245 CONNECT L BH 18
105 EA80X80X7 FY 245 CONNECT L BH 18
106 EA90X90X6 FY 245 CONNECT L BH 18
107 EA90X90X7 FY 245 CONNECT L BH 18
108 EA90X90X8 FY 245 CONNECT L BH 18
109 EA90X90X9 FY 245 CONNECT L BH 18
END
BOLTDATA
END
END
END
TERRAIN
ANGLE 0 TCAT 2.0 KD 1.00 $ HH 0.0 BETAH 0.0 XLEE 0.0
END
LOADS
CASE 100 Weight of tower plus ancillaries
DL
17
DIGI SENAI AIRPORT N550-REV.0
CASE 200 wind at 0 to X axis
WL ANGLX 0.0 NOICE
ANCILLARIES
FACE
WORK-PLATFORM2 FACE 1234 ZA 31.50 MASS 100 CN 1.8 AREA 0.30 FLAT
WORK-PLATFORM3 FACE 1234 ZA 43.50 MASS 100 CN 1.8 AREA 0.30 FLAT
END
END
-- L O A D C A S E S --
Case Y/N Title
100 N WEIGHT OF TOWER PLUS ANCILLARIES
110 N BARE DEAD WEIGHT OF TOWER
200 N WIND AT 0 TO X AXIS
201 N from Case 200 - P'aw = Ga.Paw
202 N from Case 200 - Ptw + Paw + Pcw
220 N WIND AT 45 TO X AXIS
221 N from Case 220 - P'aw = Ga.Paw
222 N from Case 220 - Ptw + Paw + Pcw
240 N WIND AT 90 TO X AXIS
241 N from Case 240 - P'aw = Ga.Paw
242 N from Case 240 - Ptw + Paw + Pcw
260 N WIND AT 135 TO X AXIS
261 N from Case 260 - P'aw = Ga.Paw
262 N from Case 260 - Ptw + Paw + Pcw
280 N WIND AT 180 TO X AXIS
281 N from Case 280 - P'aw = Ga.Paw
282 N from Case 280 - Ptw + Paw + Pcw
300 N WIND AT 225 TO X AXIS
301 N from Case 300 - P'aw = Ga.Paw
302 N from Case 300 - Ptw + Paw + Pcw
320 N WIND AT 270 TO X AXIS
321 N from Case 320 - P'aw = Ga.Paw
322 N from Case 320 - Ptw + Paw + Pcw
340 N WIND AT 315 TO X AXIS
341 N from Case 340 - P'aw = Ga.Paw
342 N from Case 340 - Ptw + Paw + Pcw
500 Y MAX. TOWER WEIGHT
510 Y BARE TOWER WEIGHT
520 Y TENSION: WIND AT 0 TO X AXIS
540 Y COMPRES: WIND AT 0 TO X AXIS
560 Y TENSION: WIND AT 45 TO X AXIS
580 Y COMPRES: WIND AT 45 TO X AXIS
600 Y TENSION: WIND AT 90 TO X AXIS
620 Y COMPRES: WIND AT 90 TO X AXIS
640 Y TENSION: WIND AT 135 TO X AXIS
660 Y COMPRES: WIND AT 135 TO X AXIS
680 Y TENSION: WIND AT 180 TO X AXIS
700 Y COMPRES: WIND AT 180 TO X AXIS
720 Y TENSION: WIND AT 225 TO X AXIS
740 Y COMPRES: WIND AT 225 TO X AXIS
760 Y TENSION: WIND AT 270 TO X AXIS
780 Y COMPRES: WIND AT 270 TO X AXIS
800 Y TENSION: WIND AT 315 TO X AXIS
820 Y COMPRES: WIND AT 315 TO X AXIS
Y = Cases to be checked
20
DIGI SENAI AIRPORT N550-REV.0
N = Not Used
Report Units:
Dims., lengths, areas ... mm, mm2
Forces ..................... kN
Stresses ..............N/mm2 (MPa)
Partial safety factor on strength:
Members: 1.10
Bolts: 1.10
Symbols:
fy = yield stress
nb = no. bolts in end connection.
P = design force.
C = continuity classification:
2 - continuous both ends, symmetric
3 - continuous both ends, unsymmetric
4 - continuous one end
5 - discontinuous
K = effective length factor, Table 2 and 3.
N = design capacity.
* = Load/Capacity > 1.0
# = Exceeds code slenderness limits.
Note:
* Members are checked for axial force only; additional member checks are
required if members are subject to significant bending moments.
* Buckling restraints assume fully triangulated bracing patterns; additional
checks of member capacity and buckling restraints may be required if
non-triangulated bracing is used.
* Members are not checked for manloads or maintenance loads.
2 401- 667 LEG EA90X90X7 250 6 2 0.900 85v 193 660 270c 1.401 0.885 *
2 421- 621 LEG EA90X90X7 250 6 2 0.900 85v 193 740 271c 1.405 0.888 *
2 441- 641 LEG EA90X90X7 250 6 2 0.900 85v 193 820 278c 1.442 0.911 *
2 461- 661 LEG EA90X90X7 250 6 2 0.900 85v 193 580 262c 1.357 0.857 *
2 405- 406 XBR EA65X65X6 245 1 4 0.951 127v 62.9 760 27c 0.432 0.636
2 407- 408 XBR EA65X65X6 245 1 4 0.951 127v 62.9 600 25c 0.402 0.636
2 425- 426 XBR EA65X65X6 245 1 4 0.951 127v 62.9 520 23c 0.371 0.548
2 427- 428 XBR EA65X65X6 245 1 4 0.951 127v 62.9 680 24c 0.374 0.550
2 445- 446 XBR EA65X65X6 245 1 4 0.951 127v 62.9 600 23c 0.373 0.574
2 447- 448 XBR EA65X65X6 245 1 4 0.951 127v 62.9 760 25c 0.390 0.574
2 465- 466 XBR EA65X65X6 245 1 4 0.951 127v 62.9 680 28c 0.437 0.643
2 467- 468 XBR EA65X65X6 245 1 4 0.951 127v 62.9 520 26c 0.415 0.645
2 507- 510 XBR EA65X65X6 245 1 2 0.951 127v 69.9 780 31c 0.438 0.716
2 511- 514 XBR EA65X65X6 245 1 2 0.951 127v 69.9 620 29c 0.421 0.704
2 527- 530 XBR EA65X65X6 245 1 2 0.951 127v 69.9 540 28c 0.403 0.658
2 531- 534 XBR EA65X65X6 245 1 2 0.951 127v 69.9 700 28c 0.396 0.648
2 547- 550 XBR EA65X65X6 245 1 2 0.951 127v 69.9 620 29c 0.416 0.680
2 551- 554 XBR EA65X65X6 245 1 2 0.951 127v 69.9 780 29c 0.418 0.683
21
DIGI SENAI AIRPORT N550-REV.0
2 567- 570 XBR EA65X65X6 245 1 2 0.951 127v 69.9 700 31c 0.450 0.736
2 571- 574 XBR EA65X65X6 245 1 2 0.951 127v 69.9 540 30c 0.425 0.720
2 604 BRC EA65X65X6 245 2 5 0.951 127v 69.9 760 34c 0.485 0.396
2 605 BRC EA65X65X6 245 2 5 0.951 127v 69.9 600 33c 0.466 0.402
2 624 BRC EA65X65X6 245 2 5 0.951 127v 69.9 520 30c 0.425 0.350
2 625 BRC EA65X65X6 245 2 5 0.951 127v 69.9 680 30c 0.424 0.356
2 644 BRC EA65X65X6 245 2 5 0.951 127v 69.9 600 30c 0.435 0.365
2 645 BRC EA65X65X6 245 2 5 0.951 127v 69.9 760 31c 0.440 0.361
2 664 BRC EA65X65X6 245 2 5 0.951 127v 69.9 680 33c 0.476 0.389
2 665 BRC EA65X65X6 245 2 5 0.951 127v 69.9 520 32c 0.461 0.396
2 403- 404 RED EA65X65X5 245 1 4 0.000 0 84.4 660 2 0.022 0.053
2 423- 424 RED EA65X65X5 245 1 4 0.000 0 84.4 820 2 0.023 0.055
2 443- 444 RED EA65X65X5 245 1 4 0.000 0 84.4 820 2 0.023 0.055
2 463- 464 RED EA65X65X5 245 1 4 0.000 0 84.4 660 2 0.022 0.053
2 505- 506 RED EA65X65X5 245 1 4 0.000 0 84.4 740 3 0.038 0.089
2 525- 526 RED EA65X65X5 245 1 4 0.000 0 84.4 820 3 0.039 0.092
2 545- 546 RED EA65X65X5 245 1 4 0.000 0 84.4 820 3 0.039 0.092
2 565- 566 RED EA65X65X5 245 1 4 0.000 0 84.4 660 3 0.038 0.089
2 515 RED EA50X50X5 245 1 5 0.000 0 59.3 660 2 0.036 0.059
2 516 RED EA50X50X5 245 1 5 1.692 53x 51.7 660 3c 0.055 0.079
2 519 RED EA50X50X5 245 1 5 0.000 0 59.3 740 2 0.036 0.059
2 520 RED EA50X50X5 245 1 5 1.692 53x 51.7 740 3c 0.055 0.079
2 535 RED EA50X50X5 245 1 5 0.000 0 59.3 740 2 0.036 0.059
2 536 RED EA50X50X5 245 1 5 1.692 53x 51.7 740 3c 0.055 0.079
2 539 RED EA50X50X5 245 1 5 0.000 0 59.3 820 2 0.037 0.061
2 540 RED EA50X50X5 245 1 5 1.692 53x 51.7 820 3c 0.057 0.082
2 555 RED EA50X50X5 245 1 5 0.000 0 59.3 820 2 0.037 0.061
2 556 RED EA50X50X5 245 1 5 1.692 53x 51.7 820 3c 0.057 0.082
2 559 RED EA50X50X5 245 1 5 0.000 0 59.3 580 2 0.034 0.057
2 560 RED EA50X50X5 245 1 5 1.692 53x 51.7 580 3c 0.053 0.077
2 575 RED EA50X50X5 245 1 5 0.000 0 59.3 580 2 0.034 0.057
2 576 RED EA50X50X5 245 1 5 1.692 53x 51.7 580 3c 0.053 0.077
2 579 RED EA50X50X5 245 1 5 0.000 0 59.3 660 2 0.036 0.059
2 580 RED EA50X50X5 245 1 5 1.692 53x 51.7 660 3c 0.055 0.079
3 701- 703 LEG EA100X100X10 250 6 2 0.000 0 384 800 262 0.682 0.629
3 721- 723 LEG EA100X100X10 250 6 2 0.900 26v 425 740 275c 0.647 0.630
3 741- 743 LEG EA100X100X10 250 6 2 0.000 0 384 640 255 0.663 0.646
3 761- 763 LEG EA100X100X10 250 6 2 0.000 0 384 720 255 0.665 0.608
3 704- 706 BRC EA80X80X7 245 1 5 1.472 68y 102 560 8c 0.083 0.170
3 713- 715 BRC EA80X80X7 245 1 5 1.472 68y 102 740 10c 0.102 0.208
3 724- 726 BRC EA80X80X7 245 1 5 1.472 68y 102 600 5c 0.054 0.128
3 733- 735 BRC EA80X80X7 245 1 5 1.472 68y 102 820 7c 0.067 0.137
3 744- 746 BRC EA80X80X7 245 1 5 1.472 68y 102 820 7c 0.070 0.143
3 753- 755 BRC EA80X80X7 245 1 5 1.472 68y 102 680 6c 0.054 0.111
3 764- 766 BRC EA80X80X7 245 1 5 1.472 68y 102 580 9c 0.092 0.189
3 773- 775 BRC EA80X80X7 245 1 5 1.472 68y 102 700 7c 0.071 0.161
3 711- 712 RED EA80X80X7 245 2 5 1.772 49y 149 660 19c 0.127 0.190
3 731- 732 RED EA80X80X7 245 2 5 1.772 49y 149 740 20c 0.131 0.196
3 751- 752 RED EA80X80X7 245 2 5 1.772 49y 149 820 20c 0.132 0.198
3 771- 772 RED EA80X80X7 245 2 5 1.772 49y 149 660 19c 0.129 0.194
3 707 RED EA50X50X5 245 1 5 1.996 41x 56.9 660 3c 0.061 0.097
3 708 RED EA50X50X5 245 1 5 0.000 0 59.3 660 3 0.058 0.096
3 709 RED EA50X50X5 245 1 5 2.220 35x 59.5 660 7c 0.118 0.197
3 710 RED EA50X50X5 245 1 5 0.000 0 59.3 660 4 0.066 0.110
3 716 RED EA50X50X5 245 1 5 1.996 41x 56.9 740 3c 0.061 0.098
3 717 RED EA50X50X5 245 1 5 0.000 0 59.3 740 3 0.058 0.096
3 718 RED EA50X50X5 245 1 5 2.220 35x 59.5 740 7c 0.117 0.195
3 719 RED EA50X50X5 245 1 5 0.000 0 59.3 740 4 0.066 0.109
3 727 RED EA50X50X5 245 1 5 1.996 41x 56.9 740 3c 0.061 0.098
3 728 RED EA50X50X5 245 1 5 0.000 0 59.3 740 3 0.058 0.096
3 729 RED EA50X50X5 245 1 5 2.220 35x 59.5 740 7c 0.121 0.202
3 730 RED EA50X50X5 245 1 5 0.000 0 59.3 740 4 0.068 0.113
3 736 RED EA50X50X5 245 1 5 1.996 41x 56.9 820 4c 0.063 0.100
3 737 RED EA50X50X5 245 1 5 0.000 0 59.3 820 4 0.059 0.099
3 738 RED EA50X50X5 245 1 5 2.220 35x 59.5 820 7c 0.121 0.203
3 739 RED EA50X50X5 245 1 5 0.000 0 59.3 820 4 0.068 0.113
3 747 RED EA50X50X5 245 1 5 1.996 41x 56.9 820 4c 0.063 0.100
3 748 RED EA50X50X5 245 1 5 0.000 0 59.3 820 4 0.059 0.099
3 749 RED EA50X50X5 245 1 5 2.220 35x 59.5 820 7c 0.121 0.202
3 750 RED EA50X50X5 245 1 5 0.000 0 59.3 820 4 0.068 0.113
3 756 RED EA50X50X5 245 1 5 1.996 41x 56.9 580 3c 0.059 0.094
3 757 RED EA50X50X5 245 1 5 0.000 0 59.3 580 3 0.056 0.093
3 758 RED EA50X50X5 245 1 5 2.220 35x 59.5 580 7c 0.114 0.190
3 759 RED EA50X50X5 245 1 5 0.000 0 59.3 580 4 0.064 0.106
3 767 RED EA50X50X5 245 1 5 1.996 41x 56.9 580 3c 0.059 0.094
3 768 RED EA50X50X5 245 1 5 0.000 0 59.3 580 3 0.056 0.093
3 769 RED EA50X50X5 245 1 5 2.220 35x 59.5 580 7c 0.115 0.193
3 770 RED EA50X50X5 245 1 5 0.000 0 59.3 580 4 0.065 0.107
3 776 RED EA50X50X5 245 1 5 1.996 41x 56.9 660 3c 0.061 0.097
3 777 RED EA50X50X5 245 1 5 0.000 0 59.3 660 3 0.058 0.096
3 778 RED EA50X50X5 245 1 5 2.220 35x 59.5 660 7c 0.119 0.198
3 779 RED EA50X50X5 245 1 5 0.000 0 59.3 660 4 0.067 0.111
4 801- 902 LEG EA100X100X10 250 6 2 0.900 77v 322 660 268c 0.832 0.614
4 821- 922 LEG EA100X100X10 250 6 2 0.900 77v 322 740 269c 0.836 0.617
4 841- 942 LEG EA100X100X10 250 6 2 0.900 77v 322 820 275c 0.853 0.630
4 861- 962 LEG EA100X100X10 250 6 2 0.900 77v 322 580 261c 0.811 0.599
4 803- 804 BRC EA90X90X7 245 2 5 1.170 112y 99.1 740 16c 0.160 0.159
4 805- 806 BRC EA90X90X7 245 2 5 1.170 112y 99.1 660 12c 0.119 0.118
4 823- 824 BRC EA90X90X7 245 2 5 1.170 112y 99.1 780 13c 0.132 0.131
4 825- 826 BRC EA90X90X7 245 2 5 1.170 112y 99.1 740 8c 0.081 0.080
4 843- 844 BRC EA90X90X7 245 2 5 1.170 112y 99.1 540 9c 0.088 0.087
22
DIGI SENAI AIRPORT N550-REV.0
4 845- 846 BRC EA90X90X7 245 2 5 1.170 112y 99.1 820 12c 0.118 0.118
4 863- 864 BRC EA90X90X7 245 2 5 1.170 112y 99.1 660 11c 0.111 0.110
4 865- 866 BRC EA90X90X7 245 2 5 1.170 112y 99.1 580 16c 0.157 0.156
4 903- 904 BRC EA90X90X7 245 2 5 1.151 117y 95.0 660 18c 0.187 0.179
4 905- 906 BRC EA90X90X7 245 2 5 1.151 117y 95.0 740 22c 0.232 0.221
4 923- 924 BRC EA90X90X7 245 2 5 1.151 117y 95.0 740 16c 0.170 0.162
4 925- 926 BRC EA90X90X7 245 2 5 1.151 117y 95.0 820 18c 0.194 0.185
4 943- 944 BRC EA90X90X7 245 2 5 1.151 117y 95.0 820 20c 0.209 0.199
4 945- 946 BRC EA90X90X7 245 2 5 1.151 117y 95.0 580 14c 0.152 0.144
4 963- 964 BRC EA90X90X7 245 2 5 1.151 117y 95.0 580 23c 0.240 0.228
4 965- 966 BRC EA90X90X7 245 2 5 1.151 117y 95.0 660 19c 0.204 0.195
4 907- 908 RED EA80X80X7 245 1 4 0.000 0 151 740 5 0.030 0.092
4 927- 928 RED EA80X80X7 245 1 4 0.000 0 151 820 5 0.031 0.094
4 947- 948 RED EA80X80X7 245 1 4 0.000 0 151 820 5 0.031 0.094
4 967- 968 RED EA80X80X7 245 1 4 0.000 0 151 660 5 0.030 0.092
4 985 PBR EA65X65X5 245 1 5 1.006 104v 57.4 580 1c 0.016 0.026
4 986 PBR EA65X65X5 245 1 5 1.006 104v 57.4 660 1c 0.016 0.026
4 987 PBR EA65X65X5 245 1 5 1.006 104v 57.4 740 1c 0.016 0.027
4 988 PBR EA65X65X5 245 1 5 1.006 104v 57.4 820 1c 0.017 0.027
4 809 RED EA50X50X5 245 1 5 0.000 0 59.3 660 5 0.077 0.128
4 810 RED EA50X50X5 245 1 5 0.892 165v 25.7 660 8c 0.303 0.219
4 811 RED EA50X50X5 245 1 5 0.000 0 59.3 740 5 0.077 0.128
4 812 RED EA50X50X5 245 1 5 0.892 165v 25.7 740 8c 0.305 0.220
4 829 RED EA50X50X5 245 1 5 0.000 0 59.3 740 5 0.077 0.128
4 830 RED EA50X50X5 245 1 5 0.892 165v 25.7 740 8c 0.305 0.220
4 831 RED EA50X50X5 245 1 5 0.000 0 59.3 820 5 0.079 0.131
4 832 RED EA50X50X5 245 1 5 0.892 165v 25.7 820 8c 0.311 0.224
4 849 RED EA50X50X5 245 1 5 0.000 0 59.3 820 5 0.079 0.131
4 850 RED EA50X50X5 245 1 5 0.892 165v 25.7 820 8c 0.311 0.224
4 851 RED EA50X50X5 245 1 5 0.000 0 59.3 580 4 0.075 0.124
4 852 RED EA50X50X5 245 1 5 0.892 165v 25.7 580 8c 0.295 0.212
4 869 RED EA50X50X5 245 1 5 0.000 0 59.3 580 4 0.075 0.124
4 870 RED EA50X50X5 245 1 5 0.892 165v 25.7 580 8c 0.295 0.212
4 871 RED EA50X50X5 245 1 5 0.000 0 59.3 660 5 0.077 0.128
4 872 RED EA50X50X5 245 1 5 0.892 165v 25.7 660 8c 0.303 0.219
4 909 RED EA50X50X5 245 1 5 0.901 158v 27.2 660 7c 0.274 0.209
4 910 RED EA50X50X5 245 1 5 0.000 0 59.3 660 5 0.078 0.129
4 911 RED EA50X50X5 245 1 5 0.901 158v 27.2 740 8c 0.276 0.211
4 912 RED EA50X50X5 245 1 5 0.000 0 59.3 740 5 0.078 0.130
4 929 RED EA50X50X5 245 1 5 0.901 158v 27.2 740 8c 0.276 0.211
4 930 RED EA50X50X5 245 1 5 0.000 0 59.3 740 5 0.078 0.130
4 931 RED EA50X50X5 245 1 5 0.901 158v 27.2 820 8c 0.281 0.215
4 932 RED EA50X50X5 245 1 5 0.000 0 59.3 820 5 0.080 0.133
4 949 RED EA50X50X5 245 1 5 0.901 158v 27.2 820 8c 0.281 0.215
4 950 RED EA50X50X5 245 1 5 0.000 0 59.3 820 5 0.080 0.133
4 951 RED EA50X50X5 245 1 5 0.901 158v 27.2 580 7c 0.267 0.204
4 952 RED EA50X50X5 245 1 5 0.000 0 59.3 580 4 0.076 0.126
4 969 RED EA50X50X5 245 1 5 0.901 158v 27.2 580 7c 0.267 0.204
4 970 RED EA50X50X5 245 1 5 0.000 0 59.3 580 4 0.076 0.126
4 971 RED EA50X50X5 245 1 5 0.901 158v 27.2 660 7c 0.274 0.209
4 972 RED EA50X50X5 245 1 5 0.000 0 59.3 660 5 0.078 0.129
5 1001- 1102 LEG EA100X100X10 250 6 2 0.900 77v 322 660 325c 1.009 0.745 *
5 1021- 1122 LEG EA100X100X10 250 6 2 0.900 77v 322 740 329c 1.020 0.753 *
5 1041- 1142 LEG EA100X100X10 250 6 2 0.900 77v 322 820 334c 1.038 0.766 *
5 1061- 1162 LEG EA100X100X10 250 6 2 0.900 77v 322 580 319c 0.989 0.730
5 1003- 1004 BRC EA90X90X7 245 2 5 1.151 117y 95.0 800 12c 0.129 0.125
5 1005- 1006 BRC EA90X90X7 245 2 5 1.151 117y 95.0 560 15c 0.155 0.156
5 1023- 1024 BRC EA90X90X7 245 2 5 1.151 117y 95.0 560 11c 0.111 0.116
5 1025- 1026 BRC EA90X90X7 245 2 5 1.151 117y 95.0 640 12c 0.126 0.130
5 1043- 1044 BRC EA90X90X7 245 2 5 1.151 117y 95.0 640 13c 0.139 0.141
5 1045- 1046 BRC EA90X90X7 245 2 5 1.151 117y 95.0 720 11c 0.111 0.106
5 1063- 1064 BRC EA90X90X7 245 2 5 1.151 117y 95.0 720 15c 0.161 0.162
5 1065- 1066 BRC EA90X90X7 245 2 5 1.151 117y 95.0 800 14c 0.142 0.139
5 1103- 1104 BRC EA90X90X7 245 2 5 1.125 124y 89.7 580 18c 0.198 0.178
5 1105- 1106 BRC EA90X90X7 245 2 5 1.125 124y 89.7 780 16c 0.182 0.164
5 1123- 1124 BRC EA90X90X7 245 2 5 1.125 124y 89.7 660 16c 0.176 0.158
5 1125- 1126 BRC EA90X90X7 245 2 5 1.125 124y 89.7 540 15c 0.173 0.155
5 1143- 1144 BRC EA90X90X7 245 2 5 1.125 124y 89.7 780 15c 0.171 0.153
5 1145- 1146 BRC EA90X90X7 245 2 5 1.125 124y 89.7 660 17c 0.188 0.169
5 1163- 1164 BRC EA90X90X7 245 2 5 1.125 124y 89.7 540 17c 0.192 0.173
5 1165- 1166 BRC EA90X90X7 245 2 5 1.125 124y 89.7 740 18c 0.198 0.179
5 1107- 1108 RED EA80X80X7 245 1 4 1.056 89v 124 740 6c 0.046 0.113
5 1127- 1128 RED EA80X80X7 245 1 4 1.056 89v 124 820 6c 0.046 0.115
5 1147- 1148 RED EA80X80X7 245 1 4 1.056 89v 124 820 6c 0.046 0.115
5 1167- 1168 RED EA80X80X7 245 1 4 1.056 89v 124 660 6c 0.045 0.112
5 1185 PBR EA80X80X7 245 1 5 0.952 126v 79.7 580 1c 0.014 0.022
5 1186 PBR EA80X80X7 245 1 5 0.952 126v 79.7 660 1c 0.014 0.023
5 1187 PBR EA80X80X7 245 1 5 0.952 126v 79.7 740 1c 0.014 0.022
5 1188 PBR EA80X80X7 245 1 5 0.952 126v 79.7 820 1c 0.014 0.023
5 1009 RED EA50X50X5 245 1 5 1.845 46x 54.7 660 6c 0.102 0.157
5 1010 RED EA50X50X5 245 1 5 0.881 175v 23.8 660 7c 0.286 0.191
5 1011 RED EA50X50X5 245 1 5 1.845 46x 54.7 740 6c 0.103 0.158
5 1012 RED EA50X50X5 245 1 5 0.881 175v 23.8 740 7c 0.288 0.193
5 1029 RED EA50X50X5 245 1 5 1.845 46x 54.7 740 6c 0.103 0.158
5 1030 RED EA50X50X5 245 1 5 0.881 175v 23.8 740 7c 0.288 0.193
5 1031 RED EA50X50X5 245 1 5 1.845 46x 54.7 820 6c 0.105 0.161
5 1032 RED EA50X50X5 245 1 5 0.881 175v 23.8 820 7c 0.293 0.196
5 1049 RED EA50X50X5 245 1 5 1.845 46x 54.7 820 6c 0.105 0.161
5 1050 RED EA50X50X5 245 1 5 0.881 175v 23.8 820 7c 0.293 0.196
5 1051 RED EA50X50X5 245 1 5 1.845 46x 54.7 580 5c 0.100 0.153
5 1052 RED EA50X50X5 245 1 5 0.881 175v 23.8 580 7c 0.280 0.187
5 1069 RED EA50X50X5 245 1 5 1.845 46x 54.7 580 5c 0.100 0.153
23
DIGI SENAI AIRPORT N550-REV.0
5 1070 RED EA50X50X5 245 1 5 0.881 175v 23.8 580 7c 0.280 0.187
5 1071 RED EA50X50X5 245 1 5 1.845 46x 54.7 660 6c 0.102 0.157
5 1072 RED EA50X50X5 245 1 5 0.881 175v 23.8 660 7c 0.286 0.191
5 1109 RED EA50X50X5 245 1 5 0.892 165v 25.7 660 6c 0.250 0.180
5 1110 RED EA50X50X5 245 1 5 1.844 46x 54.7 660 6c 0.103 0.157
5 1111 RED EA50X50X5 245 1 5 0.892 165v 25.7 740 6c 0.252 0.182
5 1112 RED EA50X50X5 245 1 5 1.844 46x 54.7 740 6c 0.104 0.159
5 1129 RED EA50X50X5 245 1 5 0.892 165v 25.7 740 6c 0.252 0.182
5 1130 RED EA50X50X5 245 1 5 1.844 46x 54.7 740 6c 0.104 0.159
5 1131 RED EA50X50X5 245 1 5 0.892 165v 25.7 820 7c 0.256 0.185
5 1132 RED EA50X50X5 245 1 5 1.844 46x 54.7 820 6c 0.105 0.162
5 1149 RED EA50X50X5 245 1 5 0.892 165v 25.7 820 7c 0.256 0.185
5 1150 RED EA50X50X5 245 1 5 1.844 46x 54.7 820 6c 0.105 0.162
5 1151 RED EA50X50X5 245 1 5 0.892 165v 25.7 580 6c 0.245 0.177
5 1152 RED EA50X50X5 245 1 5 1.844 46x 54.7 580 5c 0.101 0.154
5 1169 RED EA50X50X5 245 1 5 0.892 165v 25.7 580 6c 0.245 0.177
5 1170 RED EA50X50X5 245 1 5 1.844 46x 54.7 580 5c 0.101 0.154
5 1171 RED EA50X50X5 245 1 5 0.892 165v 25.7 660 6c 0.250 0.180
5 1172 RED EA50X50X5 245 1 5 1.844 46x 54.7 660 6c 0.103 0.157
6 1201- 1302 LEG EA100X100X10 250 6 2 0.900 77v 322 660 354c 1.099 0.812 *
6 1221- 1322 LEG EA100X100X10 250 6 2 0.900 77v 322 740 358c 1.110 0.820 *
6 1241- 1342 LEG EA100X100X10 250 6 2 0.900 77v 322 820 363c 1.127 0.832 *
6 1261- 1362 LEG EA100X100X10 250 6 2 0.900 77v 322 580 348c 1.081 0.798 *
6 1203- 1204 BRC EA90X90X7 245 2 5 1.125 124y 89.7 740 16c 0.177 0.159
6 1205- 1206 BRC EA90X90X7 245 2 5 1.125 124y 89.7 660 15c 0.166 0.149
6 1223- 1224 BRC EA90X90X7 245 2 5 1.125 124y 89.7 540 15c 0.163 0.146
6 1225- 1226 BRC EA90X90X7 245 2 5 1.125 124y 89.7 740 14c 0.159 0.143
6 1243- 1244 BRC EA90X90X7 245 2 5 1.125 124y 89.7 620 14c 0.154 0.139
6 1245- 1246 BRC EA90X90X7 245 2 5 1.125 124y 89.7 820 15c 0.171 0.154
6 1263- 1264 BRC EA90X90X7 245 2 5 1.125 124y 89.7 700 15c 0.171 0.153
6 1265- 1266 BRC EA90X90X7 245 2 5 1.125 124y 89.7 580 16c 0.182 0.163
6 1303- 1304 BRC EA90X90X7 245 2 5 1.097 133y 83.6 660 18c 0.214 0.179
6 1305- 1306 BRC EA90X90X7 245 2 5 1.097 133y 83.6 740 19c 0.224 0.188
6 1323- 1324 BRC EA90X90X7 245 2 5 1.097 133y 83.6 700 17c 0.209 0.175
6 1325- 1326 BRC EA90X90X7 245 2 5 1.097 133y 83.6 540 18c 0.214 0.179
6 1343- 1344 BRC EA90X90X7 245 2 5 1.097 133y 83.6 820 18c 0.219 0.183
6 1345- 1346 BRC EA90X90X7 245 2 5 1.097 133y 83.6 620 17c 0.203 0.170
6 1363- 1364 BRC EA90X90X7 245 2 5 1.097 133y 83.6 580 19c 0.228 0.191
6 1365- 1366 BRC EA90X90X7 245 2 5 1.097 133y 83.6 700 18c 0.220 0.185
6 1307- 1308 RED EA80X80X7 245 1 4 0.968 119v 95.9 740 6c 0.064 0.123
6 1327- 1328 RED EA80X80X7 245 1 4 0.968 119v 95.9 820 6c 0.065 0.125
6 1347- 1348 RED EA80X80X7 245 1 4 0.968 119v 95.9 820 6c 0.065 0.125
6 1367- 1368 RED EA80X80X7 245 1 4 0.968 119v 95.9 660 6c 0.064 0.122
6 1385 PBR EA80X80X7 245 1 5 0.890 168v 56.5 580 1c 0.021 0.024
6 1386 PBR EA80X80X7 245 1 5 0.890 168v 56.5 660 1c 0.021 0.024
6 1387 PBR EA80X80X7 245 1 5 0.890 168v 56.5 740 1c 0.021 0.024
6 1388 PBR EA80X80X7 245 1 5 0.890 168v 56.5 820 1c 0.021 0.024
6 1209 RED EA50X50X5 245 1 5 1.034 95v 46.7 660 6c 0.130 0.171
6 1210 RED EA50X50X5 245 1 5 0.870 188v 21.7 660 6c 0.276 0.168
6 1211 RED EA50X50X5 245 1 5 1.034 95v 46.7 740 6c 0.132 0.172
6 1212 RED EA50X50X5 245 1 5 0.870 188v 21.7 740 6c 0.279 0.170
6 1229 RED EA50X50X5 245 1 5 1.034 95v 46.7 740 6c 0.132 0.172
6 1230 RED EA50X50X5 245 1 5 0.870 188v 21.7 740 6c 0.279 0.170
6 1231 RED EA50X50X5 245 1 5 1.034 95v 46.7 820 6c 0.134 0.175
6 1232 RED EA50X50X5 245 1 5 0.870 188v 21.7 820 6c 0.283 0.172
6 1249 RED EA50X50X5 245 1 5 1.034 95v 46.7 820 6c 0.134 0.175
6 1250 RED EA50X50X5 245 1 5 0.870 188v 21.7 820 6c 0.283 0.172
6 1251 RED EA50X50X5 245 1 5 1.034 95v 46.7 580 6c 0.128 0.168
6 1252 RED EA50X50X5 245 1 5 0.870 188v 21.7 580 6c 0.272 0.165
6 1269 RED EA50X50X5 245 1 5 1.034 95v 46.7 580 6c 0.128 0.168
6 1270 RED EA50X50X5 245 1 5 0.870 188v 21.7 580 6c 0.272 0.165
6 1271 RED EA50X50X5 245 1 5 1.034 95v 46.7 660 6c 0.130 0.171
6 1272 RED EA50X50X5 245 1 5 0.870 188v 21.7 660 6c 0.276 0.168
6 1309 RED EA50X50X5 245 1 5 0.881 175v 23.8 660 6c 0.235 0.157
6 1310 RED EA50X50X5 245 1 5 1.034 95v 46.7 660 6c 0.131 0.171
6 1311 RED EA50X50X5 245 1 5 0.881 175v 23.8 740 6c 0.238 0.159
6 1312 RED EA50X50X5 245 1 5 1.034 95v 46.7 740 6c 0.132 0.173
6 1329 RED EA50X50X5 245 1 5 0.881 175v 23.8 740 6c 0.238 0.159
6 1330 RED EA50X50X5 245 1 5 1.034 95v 46.7 740 6c 0.132 0.173
6 1331 RED EA50X50X5 245 1 5 0.881 175v 23.8 820 6c 0.241 0.161
6 1332 RED EA50X50X5 245 1 5 1.034 95v 46.7 820 6c 0.134 0.176
6 1349 RED EA50X50X5 245 1 5 0.881 175v 23.8 820 6c 0.241 0.161
6 1350 RED EA50X50X5 245 1 5 1.034 95v 46.7 820 6c 0.134 0.176
6 1351 RED EA50X50X5 245 1 5 0.881 175v 23.8 580 6c 0.231 0.154
6 1352 RED EA50X50X5 245 1 5 1.034 95v 46.7 580 6c 0.129 0.168
6 1369 RED EA50X50X5 245 1 5 0.881 175v 23.8 580 6c 0.231 0.154
6 1370 RED EA50X50X5 245 1 5 1.034 95v 46.7 580 6c 0.129 0.168
6 1371 RED EA50X50X5 245 1 5 0.881 175v 23.8 660 6c 0.235 0.157
6 1372 RED EA50X50X5 245 1 5 1.034 95v 46.7 660 6c 0.131 0.171
7 1401- 1502 LEG EA130X130X12 250 6 2 0.900 59v 573 660 409c 0.714 0.782
7 1421- 1522 LEG EA130X130X12 250 6 2 0.900 59v 573 740 413c 0.721 0.789
7 1441- 1542 LEG EA130X130X12 250 6 2 0.900 59v 573 820 418c 0.730 0.799
7 1461- 1562 LEG EA130X130X12 250 6 2 0.900 59v 573 580 403c 0.703 0.770
7 1403- 1404 BRC EA90X90X7 245 2 5 1.097 133y 83.6 760 15c 0.181 0.160
7 1405- 1406 BRC EA90X90X7 245 2 5 1.097 133y 83.6 560 15c 0.183 0.160
7 1423- 1424 BRC EA90X90X7 245 2 5 1.097 133y 83.6 520 15c 0.181 0.159
7 1425- 1426 BRC EA90X90X7 245 2 5 1.097 133y 83.6 680 15c 0.184 0.162
7 1443- 1444 BRC EA90X90X7 245 2 5 1.097 133y 83.6 640 15c 0.178 0.156
7 1445- 1446 BRC EA90X90X7 245 2 5 1.097 133y 83.6 760 15c 0.175 0.153
7 1463- 1464 BRC EA90X90X7 245 2 5 1.097 133y 83.6 680 16c 0.189 0.165
7 1465- 1466 BRC EA90X90X7 245 2 5 1.097 133y 83.6 520 16c 0.193 0.166
24
DIGI SENAI AIRPORT N550-REV.0
7 1503- 1504 BRC EA90X90X7 245 2 5 1.069 143y 77.2 620 18c 0.239 0.185
7 1505- 1506 BRC EA90X90X7 245 2 5 1.069 143y 77.2 780 18c 0.238 0.184
7 1523- 1524 BRC EA90X90X7 245 2 5 1.069 143y 77.2 700 19c 0.242 0.188
7 1525- 1526 BRC EA90X90X7 245 2 5 1.069 143y 77.2 540 19c 0.240 0.185
7 1543- 1544 BRC EA90X90X7 245 2 5 1.069 143y 77.2 780 18c 0.232 0.180
7 1545- 1546 BRC EA90X90X7 245 2 5 1.069 143y 77.2 620 18c 0.232 0.180
7 1563- 1564 BRC EA90X90X7 245 2 5 1.069 143y 77.2 540 19c 0.251 0.195
7 1565- 1566 BRC EA90X90X7 245 2 5 1.069 143y 77.2 700 19c 0.247 0.191
7 1507- 1508 RED EA90X90X7 245 1 4 0.943 131v 98.1 740 7c 0.070 0.138
7 1527- 1528 RED EA90X90X7 245 1 4 0.943 131v 98.1 820 7c 0.071 0.139
7 1547- 1548 RED EA90X90X7 245 1 4 0.943 131v 98.1 820 7c 0.071 0.139
7 1567- 1568 RED EA90X90X7 245 1 4 0.943 131v 98.1 660 7c 0.069 0.136
7 1585 PBR EA90X90X7 245 1 5 0.872 185v 56.3 580 1c 0.023 0.026
7 1586 PBR EA90X90X7 245 1 5 0.872 185v 56.3 660 1c 0.023 0.026
7 1587 PBR EA90X90X7 245 1 5 0.872 185v 56.3 740 1c 0.023 0.026
7 1588 PBR EA90X90X7 245 1 5 0.872 185v 56.3 820 1c 0.023 0.026
7 1409 RED EA65X65X5 245 1 5 1.053 90v 64.6 660 6c 0.095 0.172
7 1410 RED EA65X65X5 245 1 5 0.907 153v 37.5 660 5c 0.139 0.146
7 1411 RED EA65X65X5 245 1 5 1.053 90v 64.6 740 6c 0.096 0.173
7 1412 RED EA65X65X5 245 1 5 0.907 153v 37.5 740 5c 0.140 0.147
7 1429 RED EA65X65X5 245 1 5 1.053 90v 64.6 740 6c 0.096 0.173
7 1430 RED EA65X65X5 245 1 5 0.907 153v 37.5 740 5c 0.140 0.147
7 1431 RED EA65X65X5 245 1 5 1.053 90v 64.6 820 6c 0.097 0.176
7 1432 RED EA65X65X5 245 1 5 0.907 153v 37.5 820 5c 0.142 0.149
7 1449 RED EA65X65X5 245 1 5 1.053 90v 64.6 820 6c 0.097 0.176
7 1450 RED EA65X65X5 245 1 5 0.907 153v 37.5 820 5c 0.142 0.149
7 1451 RED EA65X65X5 245 1 5 1.053 90v 64.6 580 6c 0.093 0.169
7 1452 RED EA65X65X5 245 1 5 0.907 153v 37.5 580 5c 0.137 0.144
7 1469 RED EA65X65X5 245 1 5 1.053 90v 64.6 580 6c 0.093 0.169
7 1470 RED EA65X65X5 245 1 5 0.907 153v 37.5 580 5c 0.137 0.144
7 1471 RED EA65X65X5 245 1 5 1.053 90v 64.6 660 6c 0.095 0.172
7 1472 RED EA65X65X5 245 1 5 0.907 153v 37.5 660 5c 0.139 0.146
7 1509 RED EA65X65X5 245 1 5 0.923 143v 41.1 660 5c 0.118 0.136
7 1510 RED EA65X65X5 245 1 5 1.053 90v 64.6 660 6c 0.095 0.173
7 1511 RED EA65X65X5 245 1 5 0.923 143v 41.1 740 5c 0.119 0.137
7 1512 RED EA65X65X5 245 1 5 1.053 90v 64.6 740 6c 0.096 0.174
7 1529 RED EA65X65X5 245 1 5 0.923 143v 41.1 740 5c 0.119 0.137
7 1530 RED EA65X65X5 245 1 5 1.053 90v 64.6 740 6c 0.096 0.174
7 1531 RED EA65X65X5 245 1 5 0.923 143v 41.1 820 5c 0.120 0.139
7 1532 RED EA65X65X5 245 1 5 1.053 90v 64.6 820 6c 0.097 0.176
7 1549 RED EA65X65X5 245 1 5 0.923 143v 41.1 820 5c 0.120 0.139
7 1550 RED EA65X65X5 245 1 5 1.053 90v 64.6 820 6c 0.097 0.176
7 1551 RED EA65X65X5 245 1 5 0.923 143v 41.1 580 5c 0.116 0.134
7 1552 RED EA65X65X5 245 1 5 1.053 90v 64.6 580 6c 0.094 0.170
7 1569 RED EA65X65X5 245 1 5 0.923 143v 41.1 580 5c 0.116 0.134
7 1570 RED EA65X65X5 245 1 5 1.053 90v 64.6 580 6c 0.094 0.170
7 1571 RED EA65X65X5 245 1 5 0.923 143v 41.1 660 5c 0.118 0.136
7 1572 RED EA65X65X5 245 1 5 1.053 90v 64.6 660 6c 0.095 0.173
8 1601- 1703 LEG EA130X130X12 250 8 2 0.900 59v 573 660 444c 0.775 0.509
8 1621- 1723 LEG EA130X130X12 250 8 2 0.900 59v 573 740 449c 0.782 0.514
8 1641- 1743 LEG EA130X130X12 250 8 2 0.900 59v 573 820 453c 0.791 0.519
8 1661- 1763 LEG EA130X130X12 250 8 2 0.900 59v 573 580 439c 0.765 0.503
8 1603- 1604 BRC EA90X90X7 245 2 5 1.069 143y 77.2 780 16c 0.212 0.164
8 1605- 1606 BRC EA90X90X7 245 2 5 1.069 143y 77.2 620 16c 0.213 0.165
8 1623- 1624 BRC EA90X90X7 245 2 5 1.069 143y 77.2 540 17c 0.218 0.169
8 1625- 1626 BRC EA90X90X7 245 2 5 1.069 143y 77.2 700 17c 0.215 0.166
8 1643- 1644 BRC EA90X90X7 245 2 5 1.069 143y 77.2 620 16c 0.206 0.159
8 1645- 1646 BRC EA90X90X7 245 2 5 1.069 143y 77.2 820 16c 0.205 0.159
8 1663- 1664 BRC EA90X90X7 245 2 5 1.069 143y 77.2 700 17c 0.222 0.172
8 1665- 1666 BRC EA90X90X7 245 2 5 1.069 143y 77.2 540 17c 0.220 0.170
8 1708- 1709 BRC EA90X90X7 245 2 5 1.042 154y 70.9 620 19c 0.270 0.192
8 1713- 1714 BRC EA90X90X7 245 2 5 1.042 154y 70.9 780 19c 0.270 0.192
8 1728- 1729 BRC EA90X90X7 245 2 5 1.042 154y 70.9 700 19c 0.273 0.194
8 1733- 1734 BRC EA90X90X7 245 2 5 1.042 154y 70.9 540 20c 0.277 0.197
8 1748- 1749 BRC EA90X90X7 245 2 5 1.042 154y 70.9 780 19c 0.263 0.187
8 1753- 1754 BRC EA90X90X7 245 2 5 1.042 154y 70.9 620 19c 0.263 0.187
8 1768- 1769 BRC EA90X90X7 245 2 5 1.042 154y 70.9 540 20c 0.278 0.198
8 1773- 1774 BRC EA90X90X7 245 2 5 1.042 154y 70.9 700 20c 0.281 0.200
8 1704- 1707 RED EA90X90X7 245 1 4 1.062 100y 121 740 7c 0.062 0.149
8 1724- 1727 RED EA90X90X7 245 1 4 1.062 100y 121 820 8c 0.062 0.151
8 1744- 1747 RED EA90X90X7 245 1 4 1.062 100y 121 820 8c 0.062 0.151
8 1764- 1767 RED EA90X90X7 245 1 4 1.062 100y 121 660 7c 0.061 0.148
8 1790 PBR EA90X90X7 245 1 5 0.844 221v 43.5 580 1c 0.027 0.023
8 1791 PBR EA90X90X7 245 1 5 0.844 221v 43.5 660 1c 0.027 0.023
8 1792 PBR EA90X90X7 245 1 5 0.844 221v 43.5 740 1c 0.027 0.023
8 1793 PBR EA90X90X7 245 1 5 0.844 221v 43.5 820 1c 0.027 0.023
8 1609 RED EA65X65X5 245 1 5 0.995 108v 55.4 660 7c 0.120 0.186
8 1610 RED EA65X65X5 245 1 5 0.892 165v 34.1 660 5c 0.149 0.143
8 1611 RED EA65X65X5 245 1 5 0.995 108v 55.4 740 7c 0.121 0.188
8 1612 RED EA65X65X5 245 1 5 0.892 165v 34.1 740 5c 0.151 0.144
8 1629 RED EA65X65X5 245 1 5 0.995 108v 55.4 740 7c 0.121 0.188
8 1630 RED EA65X65X5 245 1 5 0.892 165v 34.1 740 5c 0.151 0.144
8 1631 RED EA65X65X5 245 1 5 0.995 108v 55.4 820 7c 0.122 0.190
8 1632 RED EA65X65X5 245 1 5 0.892 165v 34.1 820 5c 0.152 0.146
8 1649 RED EA65X65X5 245 1 5 0.995 108v 55.4 820 7c 0.122 0.190
8 1650 RED EA65X65X5 245 1 5 0.892 165v 34.1 820 5c 0.152 0.146
8 1651 RED EA65X65X5 245 1 5 0.995 108v 55.4 580 7c 0.118 0.184
8 1652 RED EA65X65X5 245 1 5 0.892 165v 34.1 580 5c 0.147 0.141
8 1669 RED EA65X65X5 245 1 5 0.995 108v 55.4 580 7c 0.118 0.184
8 1670 RED EA65X65X5 245 1 5 0.892 165v 34.1 580 5c 0.147 0.141
8 1671 RED EA65X65X5 245 1 5 0.995 108v 55.4 660 7c 0.120 0.186
8 1672 RED EA65X65X5 245 1 5 0.892 165v 34.1 660 5c 0.149 0.143
25
DIGI SENAI AIRPORT N550-REV.0
8 1710 RED EA65X65X5 245 1 5 0.892 165v 34.1 660 5c 0.150 0.143
8 1711 RED EA65X65X5 245 1 5 0.971 117v 51.0 640 0c 0.005 0.010
8 1712 RED EA65X65X5 245 1 5 0.995 108v 55.4 660 3c 0.060 0.094
8 1715 RED EA65X65X5 245 1 5 0.892 165v 34.1 740 5c 0.151 0.145
8 1716 RED EA65X65X5 245 1 5 0.971 117v 51.0 720 0c 0.005 0.010
8 1717 RED EA65X65X5 245 1 5 0.995 108v 55.4 740 3c 0.061 0.095
8 1730 RED EA65X65X5 245 1 5 0.892 165v 34.1 740 5c 0.151 0.145
8 1731 RED EA65X65X5 245 1 5 0.971 117v 51.0 720 0c 0.005 0.010
8 1732 RED EA65X65X5 245 1 5 0.995 108v 55.4 740 3c 0.061 0.095
8 1735 RED EA65X65X5 245 1 5 0.892 165v 34.1 820 5c 0.153 0.146
8 1736 RED EA65X65X5 245 1 5 0.971 117v 51.0 800 0c 0.005 0.010
8 1737 RED EA65X65X5 245 1 5 0.995 108v 55.4 820 3c 0.061 0.096
8 1750 RED EA65X65X5 245 1 5 0.892 165v 34.1 820 5c 0.153 0.146
8 1751 RED EA65X65X5 245 1 5 0.971 117v 51.0 800 0c 0.005 0.010
8 1752 RED EA65X65X5 245 1 5 0.995 108v 55.4 820 3c 0.061 0.096
8 1755 RED EA65X65X5 245 1 5 0.892 165v 34.1 580 5c 0.148 0.141
8 1756 RED EA65X65X5 245 1 5 0.971 117v 51.0 560 0c 0.005 0.010
8 1757 RED EA65X65X5 245 1 5 0.995 108v 55.4 580 3c 0.059 0.092
8 1770 RED EA65X65X5 245 1 5 0.892 165v 34.1 580 5c 0.148 0.141
8 1771 RED EA65X65X5 245 1 5 0.971 117v 51.0 560 0c 0.005 0.010
8 1772 RED EA65X65X5 245 1 5 0.995 108v 55.4 580 3c 0.059 0.092
8 1775 RED EA65X65X5 245 1 5 0.892 165v 34.1 660 5c 0.150 0.143
8 1776 RED EA65X65X5 245 1 5 0.971 117v 51.0 640 0c 0.005 0.010
8 1777 RED EA65X65X5 245 1 5 0.995 108v 55.4 660 3c 0.060 0.094
Symbols:
fy = yield stress
nb = no. bolts in end connection.
* = Load/Capacity > 1.0
# = Exceeds code slenderness limits.
ANCILLARY ROTATIONS
-- L O A D C A S E S --
Case Y/N Title
100 N WEIGHT OF TOWER PLUS ANCILLARIES
110 N BARE DEAD WEIGHT OF TOWER
200 N WIND AT 0 TO X AXIS
201 N from Case 200 - P'aw = Ga.Paw
202 N from Case 200 - Ptw + Paw + Pcw
220 N WIND AT 45 TO X AXIS
221 N from Case 220 - P'aw = Ga.Paw
222 N from Case 220 - Ptw + Paw + Pcw
240 N WIND AT 90 TO X AXIS
241 N from Case 240 - P'aw = Ga.Paw
242 N from Case 240 - Ptw + Paw + Pcw
260 N WIND AT 135 TO X AXIS
261 N from Case 260 - P'aw = Ga.Paw
262 N from Case 260 - Ptw + Paw + Pcw
280 N WIND AT 180 TO X AXIS
281 N from Case 280 - P'aw = Ga.Paw
282 N from Case 280 - Ptw + Paw + Pcw
300 N WIND AT 225 TO X AXIS
301 N from Case 300 - P'aw = Ga.Paw
302 N from Case 300 - Ptw + Paw + Pcw
320 N WIND AT 270 TO X AXIS
321 N from Case 320 - P'aw = Ga.Paw
322 N from Case 320 - Ptw + Paw + Pcw
340 N WIND AT 315 TO X AXIS
341 N from Case 340 - P'aw = Ga.Paw
342 N from Case 340 - Ptw + Paw + Pcw
500 Y MAX. TOWER WEIGHT
510 Y BARE TOWER WEIGHT
520 Y TENSION: WIND AT 0 TO X AXIS
540 Y COMPRES: WIND AT 0 TO X AXIS
560 Y TENSION: WIND AT 45 TO X AXIS
580 Y COMPRES: WIND AT 45 TO X AXIS
600 Y TENSION: WIND AT 90 TO X AXIS
620 Y COMPRES: WIND AT 90 TO X AXIS
640 Y TENSION: WIND AT 135 TO X AXIS
660 Y COMPRES: WIND AT 135 TO X AXIS
680 Y TENSION: WIND AT 180 TO X AXIS
700 Y COMPRES: WIND AT 180 TO X AXIS
720 Y TENSION: WIND AT 225 TO X AXIS
740 Y COMPRES: WIND AT 225 TO X AXIS
760 Y TENSION: WIND AT 270 TO X AXIS
780 Y COMPRES: WIND AT 270 TO X AXIS
800 Y TENSION: WIND AT 315 TO X AXIS
820 Y COMPRES: WIND AT 315 TO X AXIS
Y = Cases to be checked
N = Not Used
26
DIGI SENAI AIRPORT N550-REV.0
ENVELOPE OF TOWER ROTATIONS (Degrees about global axes, 3 node plane)
Pt Height LC X-Rot LC Y_Rot LC Z-Rot
1 45.20 760 0.6658 700 0.6650 780 1.9580
2 44.35 760 0.6663 700 0.6646 760 0.8893
3 43.50 760 0.6658 700 0.6638 580 0.0620
4 42.00 760 0.6639 700 0.6618 560 0.0557
5 39.00 760 0.6398 700 0.6375 580 0.0485
6 36.00 760 0.5831 700 0.5804 560 0.0392
7 33.00 760 0.4898 700 0.4868 580 0.0305
8 31.50 760 0.4161 700 0.4134 560 0.0254
9 30.00 760 0.3462 700 0.3437 560 0.0216
10 27.00 760 0.3115 700 0.3092 580 0.0124
11 24.00 760 0.2469 680 0.2453 560 0.0068
12 21.00 760 0.2070 680 0.2058 560 0.0041
13 18.00 760 0.1514 680 0.1508 560 0.0027
14 15.00 760 0.1223 680 0.1219 580 0.0018
15 12.00 760 0.0832 680 0.0831 580 0.0012
16 9.00 760 0.0620 680 0.0620 560 0.0008
17 6.00 760 0.0365 680 0.0365 560 0.0004
18 3.00 760 0.0199 680 0.0200 580 0.0002
36
DIGI SENAI AIRPORT N550-REV.0
37