Beruflich Dokumente
Kultur Dokumente
Specification Data
A Complete Line of
Rugged, Top Guided,
Globe Valves with
LO-DB®/Anti-Cavitation
Capabilities
A Halliburton Company
Table of Contents
Foreword .................................................................................................................................... 2
Numbering System ..................................................................................................................... 3
General Data .............................................................................................................................. 3
Temperature Range/Seat Leakage/LE Packing Pressure and Temperature Limits .................. 4
Ratings/Connections .................................................................................................................. 4
CV and FL versus Travel ........................................................................................................ 5 - 7
Materials ................................................................................................................................. 8, 9
Allowable Pressure Drops .................................................................................................10 - 29
Dimensions .......................................................................................................................30 - 32
Weights .................................................................................................................................... 33
Accessories and Options ......................................................................................................... 34
Sales Offices and Distribution Centers .................................................................................... 36
Foreword
21000 Series single ported heavy top guided control Pressure Drop Capability
valves are designed with built in versatility making A variety of actuator sizes to handle low to high
them well-suited to handle a wide variety of process pressure drop requirements.
applications. Standard features include:
Allowable pressure drop shown on all tables reflect
Top Guided
actuator capability for the leakage class.
Rugged, heavy top plug guiding provides maximum
support to ensure plug stability.
Proper application requires consideration with regards
to cavitation, noise, velocity, etc. Refer to Masoneilan
Single and Double Stage
® sizing and noise manuals.
LO-DB /Anti-cavitation Trim
Replacing the conventional plug with the LO-DB®/Anti-
Tight Shutoff
cavitation design provides excellent noise attenuation
or cavitation control. Class IV leakage is standard. Optional constructions
meet IEC 534-4 and ANSI/FCI 70.2 Class V and VI.
Reduced Capacity
A series of reduced area trim is available to provide Hardened Trim
wide flow range capabilities in all valve sizes. Provided as standard to handle the high pressure drop
capabilities of the 21000 Series.
Environmental Packing
Low emission LE Packing is available to assure Trim Type
compliance with the Clean Air Act. Standard construction offers a quick change or
threaded seat ring.
SD CH1080 - 11/99
2 21000 Series
Numbering System
Control
Actuator Type Body Series Plug Type Characteristic Seat Type
General Data
SD CH1080 - 11/99
21000 Series 3
Temperature Range/Seat Leakage
Contoured Trim
Ratings/Connections ➂
Valve PN 10 to 100
Size
ANSI Class 150 to 600
mm inch
20 to 50 3/4 to 2 ■ • • ∆
80 to 150 3 to 6 ■ ∆ ■
➀ Temperature limitations are valid for PTFE based packings and LE packing. The LE Packing also has a pressure limit of 750 PSIG (52 bar).
For graphite packing, there is no temperature limitation inherent with the packing itself. For other material limitations, refer to table on Materials
of Construction, page 9.
➁ Quick Change seat ring only for double stage control valves.
DN 150 (6'') not available for double stage anticavitation valves.
➂ Ra 125 - 250 is the standard flange finish.
Other flange facings and surface finishes are available.
Other ratings, sizes, and materials are available, consult Masoneilan.
SD CH1080 - 11/99
4 21000 Series
Cv and FL versus Travel
for 21100 and 21600 Series
Contoured Trim
Body Rating: PN 10 to 100 - ANSI Class 150 to 600
Sizes: DN 20 to DN 150 - 3/4" to 6" Flow Characteristic: LINEAR
SD CH1080 - 11/99
21000 Series 5
Cv and FL versus Travel
for 21100 and 21600 Series
Contoured Trim
Body Rating: PN 10 to 100 - ANSI Class 150 to 600
Sizes: DN 20 to DN 150 - 3/4" to 6" Flow Characteristic: EQUAL PERCENTAGE
Percent of Travel 10 20 30 40 50 60 70 80 90 100
FL 0.93 0.93 0.93 0.93 0.93 0.92 0.92 0.91 0.91 0.90
Valve Orifice
Size Diameter Travel Rated Cv
inches mm inches mm inches mm
3/4 20 0.375 9.5 0.8 20.3 0.13 0.19 0.27 0.42 0.72 1.37 2.14 2.86 3.42 3.8
&1 & 0.500 12.7 0.8 20.3 0.21 0.30 0.42 0.66 1.13 2.16 3.38 4.52 5.4 6
25 0.812 20.6 0.8 20.3 0.4 0.6 0.8 1.3 2.3 4.3 6.8 9.0 10.8 12
0.375 9.5 0.8 20.3 0.13 0.19 0.27 0.42 0.72 1.37 2.14 2.86 3.42 3.8
0.500 12.7 0.8 20.3 0.21 0.30 0.42 0.66 1.13 2.16 3.38 4.52 5.4 6
11/2 40 0.812 20.6 0.8 20.3 0.5 0.6 0.9 1.4 2.5 4.7 7.3 9.8 11.7 13
1.250 31.8 0.8 20.3 0.9 1.3 1.8 2.8 4.7 9.0 14.1 18.8 22.5 25
1.625 41.3 0.8 20.3 1.2 1.8 2.5 3.9 6.6 12.6 19.7 26 31.5 35
0.375 9.5 0.8 20.3 0.13 0.19 0.27 0.42 0.72 1.37 2.14 2.86 3.42 3.8
0.500 12.7 0.8 20.3 0.21 0.30 0.42 0.66 1.13 2.16 3.38 4.52 5.4 6
2 50 0.812 20.6 0.8 20.3 0.5 0.8 1.1 1.7 2.8 5.4 8.5 11.3 13.5 15
1.250 31.8 0.8 20.3 0.9 1.3 1.8 2.9 4.9 9.4 14.7 19.6 23.4 26
1.625 41.3 0.8 20.3 1.6 2.3 3.2 5.1 8.7 16.6 26 35 41 46
1.250 31.8 1.5 38.1 1.1 1.6 2.2 3.4 5.9 11.2 17.5 23.3 28 31
3 80 1.625 41.3 1.5 38.1 1.7 2.4 3.3 5.2 8.9 16.9 26.5 35.0 42.0 47
2.625 66.7 1.5 38.1 3.9 5.5 7.7 12.1 21 40 62 83 99 110
1.625 41.3 1.5 38.1 1.7 2.5 3.4 5.4 9.3 17.6 27.6 36.9 44 49
4 100 2.625 66.7 1.5 38.1 3.9 5.7 7.9 12.4 21 41 64 85 102 113
3.500 88.9 1.5 38.1 6.8 9.8 13.7 21 37 70 110 147 176 195
2.625 66.7 2.0 50.8 4.4 6.3 8.8 13.9 24 45 71 95 113 126
6 150 3.500 88.9 2.0 50.8 7.3 10.4 14.6 23 39 75 117 157 187 208
5.000 127 2.0 50.8 14 20 28 44 76 144 226 301 360 400
21700 Series
Single Stage LO-DB®/Anti-cavitation Trim
Body Rating: PN 10 to 100 - ANSI Class 150 to 600
Sizes: DN 20 to DN 150 - 3/4" to 6" Flow Characteristic: LINEAR
Percent of Travel 10 20 30 40 50 60 70 80 90 100
FL 0.93 0.93 0.93 0.93 0.93 0.93 0.93 0.93 0.93 0.93
Valve Orifice
Size Diameter Travel Rated Cv
inches mm inches mm inches mm
3/4 20 0.812 20.6 0.8 20.3 0.24 0.56 0.96 1.44 2.08 2.68 3.20 3.56 3.84 4
&1 & 25 0.812 20.6 0.8 20.3 0.48 1.12 1.92 2.88 4.16 5.36 6.40 7.12 7.68 8*
0.48 1.12 1.92 2.88 4.16 5.36 6.40 7.12 7.68 8
11/2 40 1.250 31.8 0.8 20.3 0.9 2.1 3.6 5.4 7.8 10.1 12.0 13.4 14.4 15
0.48 1.12 1.92 2.88 4.16 5.36 6.40 7.12 7.68 8
1.250 31.8 0.8 20.3 0.9 2.1 3.6 5.4 7.8 10.1 12.0 13.4 14.4 15
2 50
2.000 50.8 0.8 20.3 1.5 3.5 6.0 9.0 13.0 16.8 20.0 22.3 24.0 25
2.9 6.7 11.5 17.3 24.9 32.2 38.4 42.7 46.1 48
3 80 2.625 66.7 1.5 38.1
4.5 10.5 18.0 27.0 39.0 50.3 60.0 66.8 72.0 75
2.625 66.7 1.5 38.1 3.8 8.8 15.1 22.7 32.8 42.2 50.4 56.1 60.5 63
4 100
3.500 88.9 1.5 38.1 6 14 24 36 52 67 80 89 96 100
5.000 127 2.0 50.8 9 21 36 54 78 101.5 120 134 144 150
6 150
5.000 127 2.0 50.8 12 28 48 72 104 134 160 178 192 200
21900 Series
SD CH1080 - 11/99
21000 Series 7
Materials of Construction
Standard Construction
Spring
Loaded
Follower S/A
Flexible Graphite
(Fire Tested Version)
Spacer
Kalrez / Zymax*
Packing Set
5 pieces
® ® ®
Single Stage LO-DB / Double Stage LO-DB / Soft Seated LE Packing System (Optional)
Anti-cavitation Trim Anti-cavitation Trim Plug S/A Low Emission Stem Packing
SD CH1080 - 11/99
8 21000 Series
Materials of Construction
SD CH1080 - 11/99
21000 Series 9
Allowable Pressure Drops for 21100 Series (PSIG)
Air to Close, Flow to Open
Contoured Trim
Body Rating: PN 10 to 100 - ANSI Class 150 to 600
Leakage: Per IEC 534-4 and ANSI/FCI 70.2, Class IV and Class V
PTFE Packing and Standard Bonnet Bench Range (PSIG): 3 - 15
40 1
1 /2 0.8 25 10 269 --- 1084 700 1500 1500 1500 * 1500 * 1500 * 1500 *
13 6 331 --- 1490 899 1500 1500 1500 1500 1500 1500
6 6 1024 64 1500 1500 1500 1500 1500 1500 1500 1500
3.8 6 1500 647 1500 1500 1500 1500 1500 1500 1500 1500
1.7 6 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500
46 6 46 --- 335 40 624 329 914 618 1203 908
46 10 142 --- 624 329 1107 811 1500 * 1293 * 1500 * 1500 *
26 6 106 --- 595 211 1084 700 1500 1189 1500 1500
26 10 269 --- 1084 700 1500 1500 1500 * 1500 * 1500 * 1500 *
50 2 0.8
15 6 331 --- 1490 899 1500 1500 1500 1500 1500 1500
6 6 1024 64 1500 1500 1500 1500 1500 1500 1500 1500
3.8 6 1500 647 1500 1500 1500 1500 1500 1500 1500 1500
1.7 6 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500
110 10 37 --- 222 39 407 224 591 * 409 * 776 * 593 *
110 16 93 --- 388 205 684 * 501 * --- --- --- ---
80 3 1.5 47 10 142 --- 624 329 1107 811 1500 * 1293 * 1500 * 1500 *
47 16 287 --- 1058 763 1500 * 1500 * --- --- --- ---
31 10 269 --- 1084 700 1500 1500 1500 * 1500 * 1500 * 1500 *
195 10 12 --- 116 --- 220 83 324 * 187 * 428 * 291 *
195 16 43 --- 210 73 376 * 239 * --- --- --- ---
113 10 37 --- 222 39 407 224 591 * 409 * 776 * 593 *
100 4 1.5
113 16 93 --- 388 205 684 * 501 * --- --- --- ---
49 10 142 --- 624 329 1107 811 1500 * 1293 * 1500 * 1500 *
49 16 287 --- 1058 763 1500 * 1500 * --- --- --- - ---
400 16 12 --- 94 --- 175 79 256 160 338 * 242 *
400 23 30 --- 147 51 264 168 381 * 285 * 498 * 402 *
208 16 39 --- 205 68 372 234 538 401 704 * 567 *
150 6 2.0
208 23 75 --- 314 177 553 416 793 * 655 * 1032 * 894 *
126 16 84 --- 380 197 676 493 971 789 1267 * 1084 *
126 23 149 --- 574 391 999 816 1424 * 1241 * 1500 * 1500 *
SD CH1080 - 11/99
10 21000 Series
Allowable Pressure Drops for 21100 Series (bar)
Air to Close, Flow to Open
Contoured Trim
Body Rating: PN 10 to 100 - ANSI Class 150 to 600
Leakage: Per IEC 534-4 and ANSI/FCI 70.2, Class IV and Class V
Kevlar PTFE Packing and Standard Bonnet Bench Range (PSIG): 3 - 15
SD CH1080 - 11/99
21000 Series 11
Allowable Pressure Drops for 21100 Series (PSIG)
Air to Open, Flow to Open
Contoured Trim
Body Rating: PN 10 to 100 - ANSI Class 150 to 600
Leakage: Per IEC 534-4 and ANSI/FCI 70.2, Class IV and Class V
PTFE Packing and Standard Bonnet Supply pressure is 5 PSIG over bench range
SD CH1080 - 11/99
12 21000 Series
Allowable Pressure Drops for 21100 Series (bar)
Air to Open, Flow to Open
Contoured Trim
Body Rating: PN 10 to 100 - ANSI Class 150 to 600
Leakage: Per IEC 534-4 and ANSI/FCI 70.2, Class IV and Class V
Kevlar PTFE Packing and Standard Bonnet Supply pressure is 0.4 bar over bench range
Note: Inlet pressure must not exceed the ANSI rating for the selected pressure class. *17-4PH or A 638 Gr 660 Stem Standard
SD CH1080 - 11/99
21000 Series 13
Allowable Pressure Drops for 21600 Series (PSIG)
Air to Close, Flow to Open
SD CH1080 - 11/99
14 21000 Series
Allowable Pressure Drops for 21600 Series (bar)
Air to Close, Flow to Open
SD CH1080 - 11/99
21000 Series 15
Allowable Pressure Drops for 21600 Series (PSIG)
Air to Open, Flow to Open
Note: Inlet pressure must not exceed the ANSI rating for the selected pressure class.
SD CH1080 - 11/99
16 21000 Series
Allowable Pressure Drops for 21600 Series (bar)
Air to Open, Flow to Open
Note: Inlet pressure must not exceed the ANSI rating for the selected pressure class.
SD CH1080 - 11/99
21000 Series 17
Allowable Pressure Drops for 21700 Series (PSIG)
Air to Close, Flow to Open
SD CH1080 - 11/99
18 21000 Series
Allowable Pressure Drops for 21700 Series (bar)
Air to Close, Flow to Open
SD CH1080 - 11/99
21000 Series 19
Allowable Pressure Drops for 21700 Series (PSIG)
Air to Open, Flow to Open
SD CH1080 - 11/99
20 21000 Series
Allowable Pressure Drops for 21700 Series (bar)
Air to Open, Flow to Open
SD CH1080 - 11/99
21000 Series 21
Allowable Pressure Drops for 21700 Series (PSIG)
Air to Close or Air to Open, Flow to Close
Note: Inlet pressure must not exceed the ANSI rating for the selected pressure class.
SD CH1080 - 11/99
22 21000 Series
Allowable Pressure Drops for 21700 Series (bar)
Air to Close or Air to Open, Flow to Close
Note: Inlet pressure must not exceed the ANSI rating for the selected pressure class.
SD CH1080 - 11/99
21000 Series 23
Allowable Pressure Drops for 21800 Series (PSIG)
Air to Close or Air to Open, Flow to Close
Note: Inlet pressure must not exceed the ANSI rating for the selected pressure class.
SD CH1080 - 11/99
24 21000 Series
Allowable Pressure Drops for 21800 Series (bar)
Air to Close or Air to Open, Flow to Close
Note: Inlet pressure must not exceed the ANSI rating for the selected pressure class.
SD CH1080 - 11/99
21000 Series 25
Allowable Pressure Drops for 21900 Series (PSIG)
Air to Close, Flow to Open
Note: Inlet pressure must not exceed the ANSI rating for the selected pressure class.
SD CH1080 - 11/99
26 21000 Series
Allowable Pressure Drops for 21900 Series (bar)
Air to Close, Flow to Open
Note: Inlet pressure must not exceed the ANSI rating for the selected pressure class.
SD CH1080 - 11/99
21000 Series 27
Allowable Pressure Drops for 21900 Series (PSIG)
Air to Open, Flow to Open
3/4 & 1 5.7 10 331 --- 911 320 1500 1285 1500 1500
0.8
3.5 6 100 --- 447 --- 1027 435 1500 1500
3.5 10 331 --- 911 320 1500 1285 1500 1500
13 6 --- --- 155 --- 400 16 889 505
13 10 106 --- 351 --- 758 374 1500 1189
1.5 0.8
7 6 --- --- 155 --- 400 16 889 505
7 10 106 --- 351 --- 758 374 1500 1189
21 6 --- --- 75 --- 219 --- 509 213
21 10 46 --- 190 --- 432 136 914 618
21 16 133 --- 364 69 750 454 1500 * 1226 *
21 23 234 --- 567 271 1121 826 --- ---
2 0.8
13 6 --- --- 155 --- 400 16 889 505
13 10 106 --- 351 --- 758 374 1500 1189
13 16 253 --- 644 260 1296 912 1500 * 1500 *
13 23 424 40 986 602 1500 1500 --- ---
10 --- --- 56 --- 148 --- 333 150
3 63 & 40 16 1.5 33 --- 122 --- 270 87 566 * 383 *
23 72 --- 200 17 412 229 --- ---
83 10 --- --- 23 --- 75 --- 179 41
83 16 10 --- 60 --- 143 --- 310 * 172 *
83 23 32 --- 104 --- 223 86 --- ---
4 1.5
53 10 --- --- 56 --- 148 --- 333 150
53 16 33 --- 122 --- 170 87 566 383
53 23 72 --- 200 17 412 229 --- ---
125 16 --- --- 20 --- 61 --- 142 46
6
125 23 2.0 --- --- 41 --- 100 --- 217 21
Note: Inlet pressure must not exceed the ANSI rating for the selected pressure class.
SD CH1080 - 11/99
28 21000 Series
Allowable Pressure Drops for 21900 Series (bar)
Air to Open, Flow to Open
Note: Inlet pressure must not exceed the ANSI rating for the selected pressure class.
SD CH1080 - 11/99
21000 Series 29
Dimensions (inches)
A A
A
ANSI Class
Valve ANSI Class 150 ANSI Class 300 ANSI Class 600 PN 16, 25 PN 63
150 - 600 PN 10
and equivalent PN and equivalent PN and equivalent PN and 40 and 100
and equivalent PN
Size
BW, SW
mm inch RF RTJ RF RTJ RF RTJ RF RTJ RF RTJ RF RTJ
& THD
3
20 /4 8.24 7.25 - 7.64 8.11 8.11 8.11 7.25 - 7.64 8.11 8.11 8.11
25 1 8.24 7.25 7.76 7.76 8.26 8.26 8.26 7.25 7.76 7.76 8.26 8.26 8.26
40 11/2 9.88 8.75 9.25 9.25 9.76 9.88 9.88 8.75 9.25 9.25 9.76 9.88 9.88
50 2 11.24 10.00 10.51 10.51 11.10 11.26 11.38 10.00 10.51 10.51 11.10 11.26 11.38
80 3 13.24 11.73 12.24 12.52 13.11 13.27 13.39 11.73 12.24 12.52 13.11 13.27 13.39
100 4 15.50 13.86 14.37 14.49 15.12 15.51 15.63 13.86 14.37 14.49 14.53 15.51 15.63
150 6 20.00 17.76 - 18.62 19.25 20.00 20.12 17.76 - 18.62 19.25 20.00 20.12
B C
Valve
PN < 63 PN 63, 100
Standard Bonnet Extension Bonnets
Size
ANSI Class ANSI Class PN 10 to 100 PN 10 to 100
mm inch 150-300 600 ANSI Class 150 to 600 ANSI Class 150 to 600
SD CH1080 - 11/99
30 21000 Series
Dimensions (mm)
A A
A
ANSI Class
Valve ANSI Class 150 ANSI Class 300 ANSI Class 600 PN 16, 25 PN 63
150 - 600 PN 10
and equivalent PN and equivalent PN and equivalent PN and 40 and 100
and equivalent PN
Size
BW, SW
mm inch RF RTJ RF RTJ RF RTJ RF RTJ RF RTJ RF RTJ
& THD
3
20 /4 206 184 - 194 206 206 206 184 - 194 206 206 206
25 1 206 184 197 197 210 210 210 184 197 197 210 210 210
40 11/2 251 222 235 235 248 251 251 222 235 235 248 251 251
50 2 286 254 267 267 282 286 289 254 267 267 282 286 289
80 3 337 298 311 318 333 337 340 298 311 318 333 337 340
100 4 394 352 365 368 369 394 397 352 365 368 369 394 397
150 6 508 451 - 473 489 508 511 451 - 473 489 508 511
B C
Valve
PN < 63 PN 63, 100
Standard Bonnet Extension Bonnets
Size
ANSI Class ANSI Class PN 10 to 100 PN 10 to 100
mm inch 150-300 600 ANSI Class 150 to 600 ANSI Class 150 to 600
SD CH1080 - 11/99
21000 Series 31
Dimensions
Actuator Size D E F G
Actuator Size D E F G
SD CH1080 - 11/99
32 21000 Series
Weights
Body S/A (lbs)
Valve Up to PN 40 Up to PN 40 Up to PN 100 Up to PN 100
Size ANSI Class 150, 300 ANSI Class 150, 300 ANSI Class 600 ANSI Class 600
25 1 36 27 38 27
40 11/2 49 36 53 36
50 2 57 44 64 44
80 3 127 73 128 99
25 1 16 12 17 12
40 11/2 22 16 24 16
50 2 26 20 29 20
80 3 57 33 58 45
100 4 89 55 98 61
SD CH1080 - 11/99
21000 Series 33
Accessories
Extension Bonnets
Smart Valve Interface (SVI®) Environmental Capabilities (LE Packing)
Smart Positioner and Smart Valve Lubricator & Isolation Valve
Process Controller Other Flange Facings
Input range 4-20 mA Limit Stops
Split range Body Drain Plug
HART Communication Reducer and Nipple Connections
(See Brochure BW1000) NACE Compliance
Custom Trim Materials
U.O.P. Trim Materials
ValVue Software Other Materials
Calibration, Configuration, Diagnostic, and Non-Destructive Examination
Operator Interface Tool Oxygen Cleaning
(See Brochure BW1000) Electric Actuators
2700 Controllers
(See Specification Data CW6000) For additional Accessories and Options,
consult Masoneilan.
SD CH1080 - 11/99
34 21000 Series
AUSTRIA ITALY
Masoneilan HP+HP GmbH Dresser Italia S.p.A.
Hans Kudlich-Strasse 35 Masoneilan Operation
A2100 Korneuburg (b. Wien), Austria Via Cassano, 77
Phone: 43-2262-63689 80020 Casavatore (Naples), Italy
Fax: 43-2263-68915 Phone: 39-81-7892-111
Fax: 39-81-7892-208
Masoneilan Direct
BELGIUM
Masoneilan Division of Dresser Europe, S.A.
281-283 Chaussee de Bruxelles
JAPAN
Niigata Masoneilan Company, Ltd.
Sales Offices
281-283 Brusselsesteenweg 20th Floor, Marive East Tower
1190 Brussels, Belgium WBG 2-6 Nakase, Mihama-Ku
Phone: 32-2-344-0970 Chiba-shi, Chiba 261-7120, Japan
Fax: 32-2-344-1123 Phone: 81-43-297-9222
Fax: 81-43-299-1115
BRAZIL SWITZERLAND
Dresser Industria E Comercio Ltda KOREA Dresser Europe SA
Divisao Masoneilan Dresser Korea, Inc. Frauentalweg 76
Rua Senador Vergueiro, 433 #2107 Kuk Dong Building CH-8045 Zurich, Switzerland
09521-320 Sao Caetano Do Sul 60-1, 3-Ka, Choongmu-ro Mailing Address:
Sao Paulo, Brazil Chung-Ku, Soeul – 100705 P.O. Box 3568
Phone: 55-11-453-5511 Korea CH-8021 Zurich, Switzerland
Fax: 55-11-453-5565 Phone: 82-2-274-0792 Phone: 41-1-450 28 91
Fax: 82-2-274-0794 Fax: 41-1-450 28 95
CANADA
Alberta KUWAIT UNITED ARAB EMIRATES
Valve Division Dresser Valve Division Dresser Valve Division
Dresser Canada, Inc. P.O. Box 242 Post Box 61302
#300, 444-58th Avenue S.E. Safat 13003, Kuwait Jebel Ali Free Zone
Calgary, Alberta T2H 0P4 Courier: United Arab Emirates
Canada Flat No. 36, Floor 8 Courier:
Phone: 403-299-2565 Gaswa Complex, Mahboula Units Nos. JAO1 + JAO2
Fax: 403-299-2575 Kuwait Roundabout 8
Phone: 965-9061157
Ontario Jebel Ali Free Zone
Valve Division MEXICO United Arab Emirates
Dresser Canada, Inc. Masoneilan Internacional, S.A. de C.V. Phone: 971-4-838-752
5010 North Service Road Henry Ford No. 114, Esq. Fulton Fax: 971-4-838-038
Burlington, Ontario L7L 5R5 Fraccionamiento Industrial San Nicolas UNITED KINGDOM
Canada 54030 Tlalnepantla Estado de Mexico Valve Division
Phone: 905-335-3529 Phone: 52-5-310-9863 Dresser U.K. Limited
Fax: 905-336-7628 Fax: 52-5-310-5584 Trevithick Works
CHINA THE NETHERLANDS Gillibrands Estate, Skelmersdale
Dresser Valve Division Dresser Industrial Products B.V. Lancashire WN8 9TU, England
Suite 2403, Capital Mansion Masoneilan Division United Kingdom
6 Xinyuannan Road Steenhouwerstraat 11 Phone: 44-1695-52600
Chao Yang District 3194 AG Hoogvliet Fax: 44-1695-52662
Beijing 100040 The Netherlands Valve Division
China Mailing Address: U.K. Southern Sales Office
Phone: 86-10-6466-1164 P.O. Box 640 Unit 5, Brook Business Centre
Fax: 86-10-6466-0195 NL - 3190 AN Hoogvliet RT Cowley Mill Road, Uxbridge
The Netherlands
FRANCE Middlesex UB8 2FX, England
Phone: 31-10-438-4122
Dresser Produits Industriels United Kingdom
Fax: 31-10-438-4443
Division Masoneilan Phone: 44-1895-454900
4 Place de Saverne SINGAPORE Fax: 44-1895-454919
92400 Courbevoie Dresser Singapore Pte Ltd UNITED STATES
France Valve Division Northern Region
Mailing Address: 16, Tuas Avenue 8 Valve Division
92971 Paris La Defense Cedex Singapore 639231 Dresser Equipment Group, Inc.
France Phone: 65-861-6100 85 Bodwell Street
Phone: 33-1-49-04-90-00 Fax: 65-861-7172 Avon, MA 02322-1190
Fax: 33-1-49-04-90-10 Phone: 508-586-4600
SOUTH AFRICA
GERMANY Dresser Ltd, South Africa Branch Fax: 508-427-8971
Masoneilan HP+HP GmbH Valve Division Southern Region
Klein-Kollenburg-Strasse 78-80 P.O. Box 2234, 16 Edendale Road Valve Division
47877 Willich, Germany Eastleigh, Edenvale 1610 Dresser Equipment Group, Inc.
Mailing Address: Republic of South Africa 11100 West Airport Blvd.
P.O. Box 1208 Phone: 27-11-452-1550 Stafford, TX 77477-3014
47860 Willich, Germany Fax: 27-11-452-6542 Phone: 281-568-2211
Phone: 49-2156-9189-0
SPAIN Toll Free: 800-847-1099
Fax: 49-2156-41058
Masoneilan, S.A. Fax: 281-568-1414
INDIA Zona Franca
Dresser Valve India Pvt. Ltd. Sector M., Calle Y
305-306 "Midas" - Sahar Plaza 08040 Barcelona, Spain
Mathurdas Vasanji Road Phone: 34-93-223-4175
J.B. Nagar - Andheri East Fax: 34-93-223-4754
Mumbai, India 400 059
Phone: 91-22-835-4790
Fax: 91-22-835-4791 Copyright 1999. Dresser Equipment Group, Inc.
A Halliburton Company