Sie sind auf Seite 1von 3

Serial-to-Ethernet Device Servers

NPort® 5100 Series


1-port RS-232/422/485 serial device servers
››Small size for easy installation
››Real COM/TTY drivers for Windows and Linux
››Standard TCP/IP interface and versatile operation modes
››Easy-to-use Windows utility for configuring multiple device
servers
››Built-in 15 KV ESD protection for all serial signals
››SNMP MIB-II for network management
››Configure by Telnet or web browser
››Adjustable termination resistor for RS-485 ports

Overview
NPort® 5100 device servers are designed to make serial devices terminals to an IP-based Ethernet LAN. Use the NPort® 5100 device
network-ready in an instant. The small size of the servers makes servers to give your PC software direct access to serial devices from
them ideal for connecting devices such as card readers and payment anywhere on the network.

Most Cost-effective Serial-to-Ethernet Solution


Using serial device servers to connect legacy serial devices to Ethernet their full support of Microsoft and Linux operating systems and solid
is now commonplace, and users expect device servers to be cost- 5-year warranty, the NPort® 5100 series device servers provide the
effective and to provide a broad selection of useful functions. With best choice for serial-to-Ethernet converters.

Standard TCP/IP Interface and Broad Choice of Operation Modes


The NPort® 5100 device servers can be configured for TCP Server, mode, ensuring compatibility with software based on a standard
TCP Client, UDP Server/Client, Pair Connection, or Ethernet Modem network API (e.g., Winsock or BSD Sockets).

Real COM/TTY Drivers for Existing Software


The Real COM/TTY drivers provided with the NPort® 5100 seamlessly over a TCP/IP network. Using Moxa’s Real COM/TTY
device servers allow you to continue using software designed for drivers is an excellent way to preserve your software investment,
communicating through COM/TTY ports. Installation and configuration while still allowing you to enjoy the benefits of networking your serial
is painless, and allows your serial devices and PC to communicate devices.

Easy to Troubleshoot
NPort® 5100 device servers support SNMP V2, which can be used to e-mail alert can be sent instead. Users can define the trigger for the
monitor all units over Ethernet. Each unit can be configured to send alerts using Moxa’s Windows utility, or the web console. For example,
trap messages automatically to the SNMP manager when user-defined alerts can be triggered by a warm start, a cold start, or a password
errors are encountered. For users who do not use SNMP manager, an change.

1 w w w. m o x a . c o m info@moxa.com
Serial-to-Ethernet Device Servers

Appearance

NPort® 5150 NPort® 5110 NPort® 5130


Ethernet
Ethernet
RJ45 10/100 Mbps
RJ45 10/100 Mbps Power input
Reset button Power jack
Reset button
Power input 12 to 48 VDC
Power input Power jack
Power jack 12 to 48 VDC 12 to 48 VDC Reset button
Ethernet
RJ45 10/100 Mbps

DK-35A DIN-Rail Kit

Available Accessory

RS-232/422/485 RS-232 RS-422/485

Specifications
Ethernet Interface Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7,
Number of Ports: 1 UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX
Speed: 10/100 Mbps, auto MDI/MDIX 5.x, HP-UX 11i
Connector: 8-pin RJ45 Linux Real TTY Drivers: Linux kernel 2.4.x, 2.6.x
Magnetic Isolation Protection: 1.5 KV built-in Physical Characteristics
Serial Interface Housing: Metal
Number of Ports: 1 Weight: 340 g
Serial Standards: Dimensions:
NPort® 5110: RS-232 Without ears: 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in)
NPort® 5130: RS-422/485 With ears: 75.2 x 80 x 22 mm (2.96 x 3.15 x 0.87 in)
NPort® 5150: RS-232/422/485 Environmental Limits
Connector: DB9 male Operating Temperature:
Serial Line Protection: 15 KV ESD protection for all signals Standard Models: 0 to 55°C (32 to 131°F)
RS-485 Data Direction Control: ADDC® (automatic data direction Wide Temp. Models: -40 to 75°C (-40 to 167°F)
control) Operating Humidity: 5 to 95% RH
Pull High/Low Resistor for RS-485: 1 KΩ, 150 KΩ Storage Temperature: -20 to 85°C (-4 to 185°F)
Serial Communication Parameters Power Requirements
Data Bits: 5, 6, 7, 8 Input Voltage: 12 to 48 VDC
Stop Bits: 1, 1.5, 2 Power Consumption:
Parity: None, Even, Odd, Space, Mark NPort® 5110: 128.7 mA @ 12 V, 72 mA @ 24 V
Flow Control: RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF NPort® 5130/5150: 200 mA @ 12 V, 106 mA @ 24 V
Baudrate: Regulatory Approvals
NPort® 5110: 110 bps to 230.4 Kbps EMC: CE (EN55022 Class A, EN55024), FCC Part 15 Subpart B
NPort® 5130/5150: 50 bps to 921.6 Kbps Class A
Serial Signals Safety: UL (UL60950-1), TÜV (EN60950-1)
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND Reliability
RS-422: Tx+, Tx-, Rx+, Rx-, GND Automatic Reboot Trigger: Built-in WDT (watchdog timer)
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND MTBF (meantime between failures):
RS-485-2w: Data+, Data-, GND NPort® 5110: 279122 hrs
Software NPort® 5130: 246505 hrs
Network Protocols: ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, NPort® 5150: 246034 hrs
SNMP V1/V2c, HTTP, SMTP Warranty
Configuration Options: Web Console, Serial Console (NPort® Warranty Period: 5 years
5110/5150 only), Telnet Console, Windows Utility Details: See www.moxa.com/warranty
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows
XP/2003/Vista/2008/7 x86/x64, Embedded CE 5.0/6.0, XP Embedded

2 w w w. m o x a . c o m info@moxa.com
Serial-to-Ethernet Device Servers

Dimensions
NPort® 5110 NPort® 5130 NPort® 5150

12-48 12-48 12-48

Port 1 RS-422/485 Port 1 RS-232/422/485

Pin Assignment
DB9 male connector NPort® 5110 (RS-232) NPort® 5130 (RS-422/485) NPort® 5150 (RS-232/422/485)
1 2 3 4 5 PIN RS-232 PIN RS-422/485-4w RS-485-2w PIN RS-232 RS-422/485-4w RS-485-2w
1 DCD 1 TxD-(A) – 1 DCD TxD-(A) –
2 RxD 2 TxD+(B) – 2 RxD TxD+(B) –
3 TxD 3 RxD+(B) Data+(B) 3 TxD RxD+(B) Data+(B)
6 7 8 9 4 DTR 4 RxD-(A) Data-(A) 4 DTR RxD-(A) Data-(A)
5 GND 5 GND GND 5 GND GND GND
6 DSR 6 – – 6 DSR – –
7 RTS 7 – – 7 RTS – –
8 CTS 8 – – 8 CTS – –

Ordering Information
Available Models Package Checklist
NPort® 5110: 1-port RS-232 device server, 0 to 55°C operating temperature • NPort® 5100 series device server
NPort® 5130: 1-port RS-422/485 device server, 0 to 55°C operating temperature
• Power Adaptor (only for non-T models)
NPort® 5150: 1-port RS-232/422/485 device server, 0 to 55°C operating temperature
• Document and Software CD
NPort® 5110-T: 1-port RS-232 device server, -40 to 75°C operating temperature
• Quick Installation Guide (printed)
Optional Accessories (can be purchased separately)
• Warranty Card
DK-35A: Mounting Kit for 35-mm DIN-Rail

3 © Moxa Inc. All Rights Reserved. Updated Mar. 17, 2010. Specifications subject to change without notice. Please visit our website for the most up-to-date product information.

Das könnte Ihnen auch gefallen