Beruflich Dokumente
Kultur Dokumente
[ Cover Page ]
FOR
Government of India
Ministry of Communications and Information Technology
Department of Information Technology
National Informatics Centre (NIC)
Assam State Centre
NIC-ASSC-DRISHTI- Version: 1.0 Released on: 12-11-2005 Page 1 of
DHARITREE-UM 210
National Informatics Centre User Manual Document General
Assam State Centre ID-NIC-ASSC-DRISTI-DHARITREE-UM For Users
For
Published by
Government of India
Ministry of Communications & Information Technology
Department of Information Technology
NATIONAL INFORMATICS CENTRE (NIC)
Assam State Centre
Email: sio-asm@nic.in, asm-hemanta@nic.in
Phones: (0361) 2260254/2261964
Headed by -
Shri Hemanta Kr. Saikia, Technical Director,
NIC, Assam State Centre.
Reviewed by Shri Hemanta Kr. Saikia, Technical Director
NIC, Assam State Centre, Guwahati
This d ocu m ent is the sole p rop erty of N IC, Assam . Any alteration,
modification, deletion or copying of the material without due permission of NIC,
Assam would call for strict legal (Civil and Criminal) implications.
Amendment Log
N IC and the User Organization being governm ent bod ies d o not have a financial
or a contract agreem ent as su ch. The d evelop m ent, im p lem entation and
m aintenance of DHARITREE fall w ithin the p urview of Govt. of Ind ia
sponsored Land Records Computerization (LRC) project. According to which the
DHARITREE softw are shall be m aintained by N IC for all su bsequ ent
requirements of enhancement and upgradations in technology.
The User group shall be provided all necessary operational and technical
trainings on the software, which shall be implemented in all the districts and
circles of Assam. NIC is bound to provide technical support and such trainings,
as newer versions are released for implementation.
TABLES OF CONTENTS
This book has been organized into 11 chap ters along w ith a annexu re
section and , each chapter deals with different topics. A quick reference on which
chap ter d eals w ith w hat top ic, for w hat pu rp ose and w ho shou ld consu lt w hich
chapter(s) has been given in a tabular format below.
INTRODUCTION
The Land Record s Com pu terization Softw are System of the Government
of Assam has been christened as DHARITREE. The DHARITREE is a com pletely
web-enabled System of the Revenu e Departm ent of Govt. of Assam , w hich is
analyzed , d esigned & d evelop ed by N IC, Assam State Centre for its
im plem entation at the District level, Sub-Divisional level and the Circle level
offices of Revenue Department of Assam.
1.3 Scope
This d ocu m ent w ill be u sefu l for learning and op erating the
DHARITREE softw are system by d ifferent u sers of the Revenu e Dep artm ent,
Govt. of Assam involved in Land and Revenue Administration.
The d ocu m ent serves the interest of the DHARITREE cu stom er and
the producer as well.
So, to elim inate the above p roblem s, and keep ing in view the
essentiality of e-Governance for good governance the objective of
DHARITREE has been set as under
The p resent DHARITREE (Version 1.1) has been organized into the
following sub-systems:
Different privileged u sers have been created so far w ith the p resent
DHARITREE. A sample of which are given in the following tables :
LAND RECLASSIFICATION
dc dc RECLASSIFICATION
adc dc RECLASSIFICATION
Login
Privileges Functions that can be accessed
Name
land adm DATA ENTRY/EDIT MENU
1. Chitha Register Entry
2. Jamabandi Remarks Entry
3. Complete Jamabandi View/Edit
REPORT MENU
1. Chitha Report.
2. Jamabandi Remarks Report.
3. Jamabandi Report.
4. Tauzi Bahira Report.
5. Encroachment Penalty Report.
6. MIS Report.
MANITENANCE MENU
1. Jamabandi Auto Update.
2. Delete Dag Information.
3. Data Back-Up/Restore.
QUERY MENU
(Allows to view various master codes tables)
INITIALIZATION MENU
1. Login User Creation
2. Mutation User Creation
3. Administrative User Creation
4. Lot Mandal Master Entry
5. Lot Mandal Master Edit
6. SK Master Edit
7. Location Creation
8. Other Initialization
REPORT MENU
1. Chitha Report.
2. Jamabandi Remarks Report.
3. Jamabandi Report.
QUERY MENU
( all items )
QUERY MENU
( all items )
MUTATION MENU
( Items as per role)
1.10 Benefits
i) Land Ow ners w ill get their legitim ate certificates w ith qu ality , and
w ithou t d elay, and thereby enabling them to obtain all the benefits
ou t of their land hold ing. Also, paying only the d u e am ou nt for
getting a quality service will benefit them.
1.11.1 Hardware
i) Xeon Processor based Server at District level.
ii) Xeon Processor based Server at Circle Office level.
iii) Pentium IV based Client at District & Circle level offices.
iv) 136-Column Dot Matrix Printer.
iv) Biometric Thumb Impression Device.
v) Modem/Telephone for network connection.
The H ard w are and Softw are requ irem ents for the im plem entation
of DHARITREE software are as follows:
HARDWARE REQUIREMENTS
Server Configuration
Client Configuration
Other Equipments
SOFTWARE REQUIREMENTS
Server
Client
Windows 2000 Professional / Windows XP Operating System
Internet Explorer 5.5 or above
There are tw o w ays to install DHARITREE softw are into you r server
m achine. One w ay is to u se the DHARITREE autom atic installer CD, pu t it
into the CD ROM d rive and follow the installation step s prom p ted by the
installer.
The second w ay is to d o all the installation tasks m anu ally and this
is to be done only when the automatic installer fails accidentally.
The auto-installer w ill au tom atically install GIST SDK, and Iplu gin
from the DHARITREE CD after clicking the respective buttons being
d isp layed by the installer . Please read the first screen d isp layed by the
installer carefully and then p roceed . Bu t the SQL Server 7 or 2000 m u st be
installed from the SQL Server CD separately.
To Install and Configure SQL Server RDBMS, follow the following steps:
Insert the DHARITREE CD into the drive and the installation will
start automatically or run the setup.exe from the CD.
Click on the Install GIST SDK bu tton to install GIST SDK, if it has
not alread y been installed on the server. On clicked this bu tton, the
following message box is displayed which hints you to reboot the machine
after installation of GIST SDK , and then reru n the auto-installer from the
DHARITREE CD. Click the OK bu tton of this m essage box to p roceed .
NIC-ASSC-DRISHTI- Version: 1.0 Released on: 12-11-2005 Page 24 of
DHARITREE-UM 210
National Informatics Centre User Manual Document General
Assam State Centre ID-NIC-ASSC-DRISTI-DHARITREE-UM For Users
Click on the N ext bu tton as show n on the above screen to continu e the
installation or click on the Cancel bu tton to cancel the installation.
Click the Yes button on the License Agreem ent Screen to p roceed . Click
Back to m ove to the p reviou s screen, or N o to stop installation.
N.B. Installation of GIST-SDK requires the system to restart. After restarting the
machine , run the setup.exe from the DHARITREE Installer CD again and
continue to next step by clicking on the Install Iplugin button to install Iplugin
, if it is not there on the same server.
As shown on the above screen now click on the Install IPlugin button.
Then click on the OK button of the message box that pops up , to continue
installation of Iplugin.
On the License Agreement page as shown above click on the Yes button to
continue; Back to move to the previous screen , or No to stop installation.
Enter User Name & Company Name as indicated in the above screen and click on
the Next button to proceed.
Select Assamese by clicking on the Assamese word from the above list and
click on the Next button to proceed.
Next, on this screen, the installer checks the System for availability
of IIS and MS-SQL servers on the server m achine. If the statu ses are
d isp layed like the above screen then click on the Continu e button,
otherw ise click on the Back bu tton , and click Cancel bu tton to cancel
installation of DHARITREE . Then d o the need fu l as system ad m inistrator
to install/ ru n IIS server if show n not Ok! , and also to install SQL server,
if Detected is not show n in the above screen. After d oing these, again
ru n the DHARITREE auto-installer CD to proceed w ith installation of the
DHARITREE software.
1. Install Software to
2. Installing Database to SQL Server
3. Configuring IIS.
After these Steps, click on the Continu e that ap p ears on the screen
to p roceed w ith installation. After su ccessfu l installation you w ill receive
congratu lation m essage as below . H ere click on the OK bu tton to qu it
the installation process.
Insert the GIST SDK CD into the CD ROM d rive and follow the
instru ctions prom p ted by the installer. To know abou t the d etail
installation proced u re please refer to the page nu m ber 15 of section 2.2.2
where it has already been explained.
Insert the IPlu gin CD into the CD ROM d rive and follow the
installation step s prom p ted by the installer. To know abou t the d etail
installation proced u re please refer to the page nu m ber 18 of section 2.2.2
where it has already been explained.
Now, click Start > Settings > C ontrol Panel > A dministrative Tools >
Internet Information Services
On this screen, in the Alias box, typ e lrc and click on N ext button.
H ere, you m u st enter the fold er nam e ( path ) w here you have
cop ied the D haritree Softw are . You can type C:\ dharitree , if as p er
exam ple you have cop ied it to this fold er. After entering the path, click on
the Next button.
Click Next and then Finish the Virtual Directory creation wizard.
Click on Start > Programs > Microsoft SQL Server > Enterprise Manager.
Click on the + sym bol of SQL Server Grou p and (local) su ccessively and
then Right Click on Database and select N ew Database
In the above screen give the Database name as LRC and click on OK
N ext, you ll find that u nd er the Databases, LRC has been listed .
Right Click on LRC and Click on All Tasks > Restore Database.
After this on the above screen click on the [ ] button and select the p ath
of the d atabase backup file as given in the above screen and then click on
OK and then the installation of the Dharitree Database w ill be d one.
This chapter aim s to m ake one fam iliar on how to invoke the DHARITREE
softw are for u sing it and how to login (get access to the softw are) and log-off
(how to qu it from the softw are) the softw are. Also this chapter m akes one
fam iliar w ith d ifferent m enu item s of the DHARITREE softw are and their
purposes before actually using them.
http://dharitree/lrc/login.asp
or
http://(server IP)/lrc/login.asp
where dharitree is the name of the server or (server IP) is the actual IP
address( e.g. 192.168.100.100) of the DHARITREE server machine of the
intranet.
Then the follow ing Login page w ill ap pear. H ere a u ser is to typ e
his/her user name & password correctly to get access to the Main Menu of
the DHARITREE. If either the u ser nam e or the p assw ord is typ ed
NIC-ASSC-DRISHTI- Version: 1.0 Released on: 12-11-2005 Page 44 of
DHARITREE-UM 210
National Informatics Centre User Manual Document General
Assam State Centre ID-NIC-ASSC-DRISTI-DHARITREE-UM For Users
incorrectly it w ill not d isp lay the m ain m enu as show n below . Then the
system suggests to typ e them correctly again. Once the u sernam e and
passw ord are typed correctly and clicked on the GO bu tton, he/she will
be able to access different menu items of DHARITREE as per the privileges
assigned to him/her.
Login Page
When finished u sing, ju st click on the Log Off & close the Internet
Explorer (IE) to exit.
N.B. TO TY PE IN A SSA M ESE PLEA SE EN SURE THA T THE Caps Lock KEY IS ON .
Dep end ing on d ifferent fu nctions & ease of m aintenance, the DHARITREE
softw are has been d ivid ed into d ifferent m od u les, w hich have been
organized u nd er d ifferent su b-system m enus. By clicking on each m enu
item a user can perform the activity he/she wants to perform. Those are -
This Menu provid es the list of m aster cod es item s as listed below .
One can select a particu lar m aster cod e item from the list and can view its
complete code and description list.
allottees_type_code
case_type_code
col8_order_type
Crop_code
crop_season
encro_class_code
encro_land_used_for
fruit_tree_code
landclass_code
LM_Code
Nature_trans_code
Ord_on_gl_type_code
order_type
patta_code
premium_chalan_receipt
rmk_content_type
Source_water
Tenant_type
type_of_allotment
Used_noncrop_type
users
1. Login User Creation (throu gh this a 1st level login accou nt can be
created )
2. Mu tation User Ed it/ Creation (throu gh this a m utation login accou nt
can be created)
To perform any of the above listed activities the Click here link for the
respective activity should be clicked.
N.B. The names of mutation items are self-indicative of function that can be
performed through them.
Initialization
This chapter intend s to fam iliarize one w ith all the item s and instru ctions
of the vital task of initialization of the DHARITREE softw are, before operating on
it for p rod u ction ru n. For accom plishing all the necessary tasks of initialization,
one is to use all the items of the Initialization Menu as explained below in details.
After com p leting this task of initialization only, one w ill be able to use variou s
other featu res/ fu nctions of the softw are, as p er p rivileges given to them . This
initialization privileges have been given to a user- land (d efau lt ad m inistrator of
DHARITREE) only. It is t o remember t hat t he first init ializ at ion t ask is t o creat e
t he det ails of Administ rat iv e Users , and t hen t he det ails of t he Lot Mandals.
Because t he codes being giv en t o t hese users must also be used successiv ely in
t he Mut at ion User creat ion process of t he Init ializ at ion Menu , for t hese users.
For perform ing any task of initialization, exp lained below , invoke the
DHARITREE software as explained in section 3.1.
Login u sers are the first level entry p rivileged u sers of DHARITREE.
For creating a new Login User first click w ith the m ou se on the
Initialization m enu . Then it w ill d isplay the list of item s of this m enu as
show n below . Then click on the Login User Creation item of this m enu to
create a new user.
Enter the N am e, Passw ord ,User Cod e, and Privilege in the above
form and then click on the Su bm it bu tton to create a new login user. H ere
N am e is a w ord w ith not m ore than 30 characters in length (w hich can
have any one character from a-z,A-Z, & 0-9) and p assw ord is also a w ord
w ith not m ore than 25 characters in length (w hich can have any one
character from a-z,A-Z, & 0-9). The User Cod e is one of the ad m nX (for
ad m inistrator), gstXX (for gu est), and d eXXX (for d ata entry op erator)
and m u tXX (for m u tation u ser). H ere , in the cod e X stand for a d igit
betw een 0 to 9. Select one of the follow ing privileges from the d rop -down
list by clicking on the v bu tton associated w ith the field :
i) ast ( Assistant )
ii) lm ( Lot Mandal )
iii) sk ( Supervisor Kanangu)
iv) co ( Circle Officer )
v) dc ( Deputy Commissioner / District Collector )
vi) adc ( Additional DC )
vii) mut ( Mutation )
After that for p erform ing his/ her specific task of m u tation, he/ she
w ill login w ith his/ her m utation u ser nam e and p assw ord in the
Mu tation Login form of the DHARITREE Main Menu , w hich w e w ill
create/edit through this module.
N.B. For assigning a User Code in the above form , please take a print
ou t of all the row s of LM s , and the ad m inistrative u ser s tables
through the Query Menu.
i) DC ( Deputy Commissioner )
ii) ADC ( Additional DC )
iii) SDO ( Sub-Divisional Officer )
iv) CO ( Circle Officer )
v) SK ( Supervising Kanangu)
Select User Designation as one of the (DC, ADC, SDO, CO, SK),
enter the district code, subdiv code, circle code, user name, user code, user
statu s ( from the d rop -d ow n list ) and click on Su bm it to ad d a u ser.
Field s have to be entered w .r.t. the resp ective d esignation e.g. for
designation being - DC , no need to enter sub-division, and circle codes .
The User s N am e & User s Cod e can have m axim u m of 45 & 4 characters
respectively. The style of u ser s cod e w ill be au to-bu ilt d ep end ing on the
d esignation. For exam p le for a ad m inistrator w ith d esignation being DC
the cod e w ill be initialized to DC , and you have only to enter a tw o d igit
number to build a unique code for him/her. Also remember this same user
code must be used during mutation user creation process for him/her.
Lot Mand als (LMs) have vital roles in land record s m u tation and
m aintenance p rocess. For LM d etails entry/ m aintenance a separate table
has been maintained in DHARITREE. Remember t he LM s codes st art s w it h
the letter M and followed by a number and this same code must be entered
for him during Mut at ion user creation. The p refix M of the cod e is au to-
built. Only a three d igit u niqu e nu m ber to be entered in the next field of
the cod e to bu ild the com p lete cod e for an LM. Also, it is to be
rem em bered that all the LMs of the d istrict shou ld be given a u niqu e cod e
in this pattern( exam p le given , M001 ).
After clicking on Lot Mand al Master Entry op tion the follow ing form
will appear.
Enter the location cod es for d istrict, su b-d ivision, circle, m ou za,
and , lot for w hich the LM w orks. Then his nam e , and statu s from the
drop-d ow n list. Remember , here t he Corresponding SK Code is v ery
significant . This SK( Superv isor Kananguho) code should be t he code of
t hat SK w ho w orks on t he same Circle in w hich t his LM also w orks and
superv ises act iv it ies of t his LM. And t his SK code should hav e already
been ent ered in t he Administ rat iv e User Creat ion process. After entering
this click on the su bm it to create a new Lot Mand al s record .
Select the Location and Mand al s N am e and click on the Click here
to view or Ed it Lot Mand al Info bu tton for view ing or ed iting.
Sim ilar to the Lot Mand al s m aster ed it, SK s inform ation can be ed ited .
To d o this , click on the SK Master Ed it op tion u nd er Initialization Menu .
In this screen w e can see the SK s Inform ation. Lot N o. and Lot
Mand al s inform ation , u nd er his su p ervision , are also listed .
i) District
ii) Sub-Division
iii) Circle
iv) Mouza
v) Lot
vi) Village/Town-Part
Enter the location cod e and nam e and click Ad d Location Inform ation .
Other Master Cod es can be entered here. These m aster cod es are
referenced d u ring Chitha entry/ ed it operation; e.g. Crop cod es, Fru it
plants codes, Land class codes , Patta types codes etc.
Select Other Master Cod es Entry item from the Initialization Menu .
Select one of the Entry Item as listed below and click on su bm it to enter
data for data item.
N.B. : These cod es goes bu ilt-in along w ith DHARITREE base d atabase. This item
is requ ired to be u sed only w hen an ad d ition to a particu lar cod e list is to be
done.
Throu gh this m od u le all the d ata regard ing the Chitha of Dag (a
plot) of th Chitha Register is entered as w ell as ed ited . To d o so, click on
the Chitha Register Entry op tion of Data Entry/ Ed it m enu . Then a
page w ill ap pear to select the ap prop riate land location, for w hich the
Chitha record is to be entered. A user can select by clicking the drop down
box and selecting his d esired location, say- District, Su b-d ivision, Circle,
Mouza, Lot N o. Then click N ext Form . Then select Village/ Tow n p art of
the plot and click su bm it .
Then the main page for the Entry/Edit will appear just like below:
In this p age, the d etail inform ation for Colu m n 1-6 of the Chitha is
entered . A u ser can u se the Tab key to navigate from one inp u t box to the
next w hile entering the d ata. The Fields marked w it h red st ar (*) are
mandatory.
For a m inim u m entry, enter the Dag nu m ber, select the Patta type,
enter the Patta N o, select the Land Class, then the Dag area, w hether it is
Direct Paying State or not and the land revenu e. The softw are calculates
the Local Tax au tom atically. N ow , if inform ation abou t the old Dag no.,
boundary description of plot of the surrounding plot and the north, south,
east, w est d ag nu m bers of the given d ag nu m ber are available, enter them
also and click Subm it .
If record alread y available for that plot/ Dag, then the Ed it m ethod
w ill be called , w here the u ser can ed it the existing record for that plot and
finish by clicking on the Mod ify bu tton.
Chitha Column 7
In Chitha Col 7, the Pattad ar d etails are to be entered . If alread y
the Pattad ar d etails are there then the follow ing w ind ow w ill appear,
w here a u ser is requ ired to select one Pattad ar and click Show Details .
H e can choose to enter a new record of Pattad ar for that plot also
by clicking Want to Enter a Pattad ar Details (Colu m n 7)
Then the follow ing page ap pears (d irectly for fresh entry or w hen he
clicks Show Details for ed iting).
H ere the u ser has to enter the nam e of the Pattad ar, his gu ard ians,
ad d ress, his land p ortion etc. in the space p rovid ed . If his nam e is to be
show n as strikeou t then select Pd ar N am e d eleted as yes .
Then click on the Subm it or the Mod ify bu tton (w hat com es in
the page). If there are multiple no of Pattadar, enter them in the same way.
Finally, click N ext .
Chitha Column 8
In Chitha Col. 8, the field m u tation ord er is kep t. H ere he/ she can
d o three typ es of w ork - (A) If record s are alread y p resent then you can
m od ify it (B) you can freshly enter new ord er or (C) skip these page if
nothing to be entered.
Initially the follow ing p age com es if there is alread y record p resent
and he/ she is ju st requ ired to select the ord er no and click Show d etails
for modifying it otherwise click next for moving to the next form.
N ow , if the ord er p age com es, he/ she is requ ired to prop erly select
the Ord er type, N atu re of Transfer, LM s N am e, Date, CO s N am e, Date
and then click Subm it or Mod ify (then click N ext ).
Then the following page will appear and enter the detail about him
or m od ify it. Then click Su bm it (then click N ext ).
Chitha Column 11
Then the following page will appear and enter the detail about him
or m od ify it. Then click Su bm it (then click N ext ).
In these colu m ns, the year-w ise crop d etaila for that plot are
entered . (A) If the record s are alread y there then he/ she can m od ify it,
other-w ise (B) he/ she can freshly enter the record , or (C) skip if no
inform ation is available by clicking N ext .
Then follow ing p age w ill ap pear and he/ she has is required to
enter the Crop detail for that plot (Dag).
If the plot (Dag) is u sed for other than Crop , then ju st like the
previous, in these columns, the non-crop d etail for that plot is entered . (A)
If the record s are alread y there then he/ she can m od ify it, otherw ise (B)
he/ she can freshly enter the record , or (C) skip if no inform ation is
available by clicking N ext .
Then follow ing p age w ill ap pear and he/ she has is required to
enter the Non-Crop detail for that plot (Dag).
Chitha Column 30
If the plot (Dag) is u sed for p rod u ction of fru it, then ju st like the
previous column, in this column the fruit detail for that plot is entered. (A)
If the record s are alread y there then he/ she can m od ify it, otherw ise (B)
he/ she can freshly enter the record , or (C) skip if no inform ation is
available by clicking N ext .
Then follow ing p age w ill ap pear and he/ she has is required to
enter the fruit detail for that plot (Dag).
Chitha Column 31
In Chitha Colu m n 31, all the rem arks as w ell as the Mu tation ord er
d etails are to be entered . Rem arks m ay be LM s N ote, SK s N ote,
Encroacher detail , Mutation Order etc. Click on the appropriate option to
enter or click N ext .
Be su re that you have the ord er no & d ate before p roceed ing otherwise
skip this stage
Su p pose he/ she has to enter any basic ord er d etail then he/ she has
to select the app ropriate one (if exist for ed iting) & click Show Details
or click Want to Enter a Basic Ord er .
Then he/ she has to select the Typ e of Ord er in the next Screen and
click Subm it as show n in the next page below .
Su p pose he/ she selects HUKUM then the next form app ears
w here he/ she enters the d etail as below . Star (*) m arked field s are
mandatory.
Su p pose the Ord er typ e is selected Conversion, then the next form
w ill be like the below . In other cases also like Mutation, Partition, etc
similar window will appear & he/she has to enter the data accordingly.
N.B. Then screen for on behalf of /In Favor of may be like the following in case
of other type of Order, but the entry procedure is the same.
Option 2: SK Note
If there is entry for SK note, click on the SK note option. Now,
choose the line no for Existing note to ed it or click Want to Enter a SK
N ote .
Then in the follow ing screen, typ e the SK N ote, Date & Select his
N am e. Then Su bm it u ntil all SK note entry is finished & finally click
N ext .
Option 3: LM Note
Then in the follow ing screen, type the LM N ote, Date & Select his
N am e. Then Su bm it u ntil all LM note entry is finished & finally click
N ext .
If there is entry for Encroacher in that Dag (Plot), w hen he/ she
selects the option the follow ing screen app ears, w here typ e the d etail
about the encroacher.
Then click Su bm it & rep eat the sam e for m u ltiple no of entry.
With these steps the Chitha Register entry for one Dag (Plot) is
com p leted . Then a m essage screen w ill ap p ear, w here he can choose entry
for another Dag, etc.
Then the Location page w ill ap p ear and the entry op erator w ill
have to select the ap p rop riate Location u p to Lot N o & in the N ext
Form he/ she has to select the village.
In the next form he/she has to select the Patta type & enter the Patta No.
Then, the Remark line no comes automatically & he/she just needs to type
the Remark (line-w ise) and click Save Rem ark .
Finally, click H om e , w hen com p leted or click Enter rem ark for the
sam e village if he/ she w ants to enter Rem ark for another Patta.
Bu t, if som e Rem ark is p resent alread y, and then a page w ill com e w here
he will be able to view the Remarks for that Patta. If he wants to enter new
rem ark or ed it existing line then click Ed it this Rem ark .
The rem ark entry page w ill com e w hich is the d efau lt p age in case there is
fresh remark entry.
Com p lete Jam aband i View / Ed it m eans, for a particu lar Jam aband i,
the (A) Dag Inform ation (B) Pattad ar Inform ation & (C) Rem ark etc. can
be viewed & edited.
Then the Location page w ill ap p ear and the entry op erator w ill
have to select the appropriate Location u p to the village. Then he/ she is
required to
Select and enter the Patta N o, w hich he is going to View or Ed it. Then
click N ext Form . Then the m ain m enu p age for Jam aband i View / Ed it
comes.
N ow , he/ she is ju st requ ired to click the app rop riate link w hich field
he/ she w ant to view or ed it, i.e., Jam aband i Dag, Jam aband i Pattad ar or
Jamabandi Remark.
If he/ she selects this op tion, the follow ing p age appears, w here
he/ she ju st fill the u pd ated (new ) d ata & click Ed it . If w ant to go back
click Com plete Jam aband i View / Ed it .
Moreover he/ she can enter new Dag inform ation also for that Patta
by clicking the bu tton Enter new Dag . The follow ing screen ap p ears in
this case and he/she has to fill up Dag No, Govt. Grant No (if any), Land
typ e (select), Land area, Local Tax and Su rrou nd ing Inform ation (if
inform ation is available) in the sp ace p rovid ed . Then, click Enter
Record .
If he/ she selects this option, the follow ing p age (left) appears,
w here he/ she ju st need s to fill the u pd ated (new ) d ata & click Save the
Ed ited Record . H e/ she can navigate to the next record by buttons
provid ed . To enter a com p lete new record abou t a Pattad ar click Enter
new Pattad ar . Finally, if he/ she w ants to go back, click Com p lete
Jam aband i View / Ed it .
If he/ she selects this op tion, the follow ing p age appears, w here
he/ she w ill get lots of op tions Ed it as a w hole, Line-w ise ed it, Delete a
line and Help.
First click H ELP how to u se it. H ere if he/ she w ill see all the
rem ark line by line. If he/ she find s that any m od ification is requ ired ,
he/ she can m od ify that line and click Save the Ed ited Rem ark .
Then the follow ing p age com es, w here he can ed it the rem ark. If
ed ited record d oes not accom m od ated in that line click new line and typ e
there you r record . H e/ she can get u p to 5 new lines at a tim e & start fresh
if again new line is requ ired . When typ ing (m axim u m 5-line) is
com p leted , click on Save new rem ark .
Finally click
H om e if you r record has
been edited completely.
In Report Generation Menu you can generate d ifferent typ es of rep ort
facilitated by DHARITREE.
Select Jam aband i Rem arks Report from the Rep ort Su b m enu item .
Select the Village Name, Patta Type, and Patta Number Range on this
screen and click on Generate Report .
Select Land Location from this screen and click on N ext Form .
Select the Village Name, Patta Type, Patta Number Range and click on
Generate Rep ort .
Click on Encroachment Penalty Report from the Report sub menu item.
After the appropriate location, we get the report.
The various types of MIS reports can be generated by clicking the link in
the page shown below:
8. Land Area of Annual Patta (A.P), Periodic Patta (P.P), Special Periodic Patta
(S.P.P), Special Annual Patta (S.A.P)
Maintenance Modules
On this screen, w e are to enter the relevant field s and click on Delete Data
to delete dag information. After entering Location Cod e if w e check
Basic check box then all the su bsequ ent tables w ill be selected
automatically. Otherwise we can check tables optionally also.
N.B. In case of parent - child relation, if we check the parent one then
automatically child get selected.
w rite c:\ d b_backu p and click the Backu p d atabase bu tton. The
backup of the
Dharitree database will be saved to c:\ as a file d b_backu p .
When the Restore tab is selected , w e get this screen. In this screen,
w e can d irectly w rite the full path w here the backu p is kep t, or w e can
brow se to the file by clicking the Brow se bu tton. After this, click the
Restore button to restore the Dharitree d atabase.
Query Module
On this screen, w e are prom p ted to select one of the m aster cod es as
show n above to view its content. To select an item from the list click on the v
bu tton. After selecting an item , click the Su bm it bu tton. For exam ple if w e have
selected the tenant typ e option and click on the SUBMI bu tton, then w e can
view (as show n below ) all the d ifferent types of tenancy available at p resent and
its correspond ing cod es. One op tion like Others (Aainannya in Assam ese) is
kept if some other category of codes found/applicable which is not in the list.
Here we can see the tenant codes and their type of description.
Utility Module
Select Operator Paym ent Statu s from the Utility menu item.
Enter the Operator code (Data Entry Operator Code) and click on the
Check d ata entry bu tton.
Select Circle-w ise Data Separation from the Utility m enu item .
As shown in the above screen, select the location up to circle level for
whose data separation is to be carried out.
On this screen, click the Click H ere link to start the d ata separation
process.
Mutation Modules
In this chapter w e w ill d iscu ss w ork-flow-w ise com plete p roced u re for
carrying ou t d ifferent typ es of m u tations and thereby correcting/ u p d ating
various registers.
First, the LM Logins in the Mutation Login section of the main menu page
of DHARITREE and clicks Write Report on Field Mutation . Then the Field
Mutation process starts and the following page appears.
Then he/she has to select the appropriate Mutation type. DHARITREE then
immediately generates a Case Number & the Report date for that case. Now
he/she has to select the Transfer Type, Patta Type & enter the Patta Number.
He/she can say the status of Possession [DAKHAL], is there any dispute & is the
Mutation is sought in the Rajah Adalot by ticking in the appropriate check box.
Then click Next .
Following screen will appear, where he/she is required to type the name of
the applicant for Mutation, his guardian s name & relationship with him and the
address of the applicant. Then click Submit . If there is multiple no of applicant
for the case, type their name and submit in the same way. Finally, click Next .
Now the Land area for the Mutation is to be entered. Here, first on select
the Dag no the original Dag area will be displayed. Here he/she needs to enter the
portion of Land for Mutation. Now if the Pattadar s whole land area is to be
mutated, then his name will be strike out from Chitha & Jamabandi to indicate
that his name is deleted otherwise his name will not be deleted. If it is to be
deleted, then TICK the check box and click Submit .
Now, there may be multiple no of Dag in that Patta and some other Dag
may have entry for the same case. In that case click Enter Another Dag (if any)
and repeat the process of Dag Entry & Pattadar Entry in the same way as stated.
Then a link Home will appear and click to go to Mutation Home. This is
the task to be done by LM for Field Mutation (Namjari). After that CO will
process the task.
For the process of Field Mutations, viz. Namjari and Batowara the CO has
to do very little thing. He/she just has to verify the report passed by the LM and
gives the order if he is satisfied. This Mutation starts with the Login of CO for the
Mutation Login from the main menu page & click Field Mutation & Partition
Link. Then an additional link Pending Application for Field Mutation/Partition
appears.
Now, when he clicks Click Here , a page appears, clearly showing all the
Field Mutation cases reported by the LM type wise viz. Namjari and Batowara.
Now CO can choose a case and proceed by clicking on See LM Report .
Then the detailed report in an Ordered Format appears, just like below.
Now if he/she thinks everything is OK, then he can pass the order by clicking
Order Passed & proceed. But he can keep pending for a later date to pass the
order by clicking Keep Pending . Even he can reject the case as well if he finds
so [due to some reasons] by clicking Reject , but he has to type the reason of
rejection.
Suppose he want to pass the order, then the Dag detail page comes, where
all the Dag no under that Patta passed by LM for Mutation appears for viewing.
He/she just needs to click Enter new Order. At this moment also he can keep it
pending and give the order in a later Date [clicking Give order in a later date ].
Then in the next page, he can see the type of Mutation, Nature of Transfer,
LM Name, his note date etc. He/she just needs to click submit.
Then he/she can see the Applicants detail, just by selecting the Dag no &
clicking Show details .
Then he/she can see the Pattadar details of that Patta, who were already
there, by selecting the Dag No & clicking Show Detail .
All the Pattadar s name & Land portion for that Land appears, along with
or in place of whom the Mutation is sought. He/she just needs to click submit.
Then when the Dag no selection page appears, click Next .
Here though the mutation order is completely entered, but it will not be
reflected on the Chitha until performing different update tasks under the Update
Chitha Option tab of his mutation menu. This is a simple job for the CO. Earlier,
he had to order the LM to update the Chitha, but now it is just a click for the CO.
To update the Chitha, the CO has to click the link Update the Current
Chitha (Field Mutation) -Click here .
After he/she clicks there, the mutation order is written into the Chitha and
a user will get the updated record when he/she views the Chitha report followed
by this operation.
Field partition also starts with the Login of Lot Mandal [LM] and his/her
clicking for Write Report on Field Mutation . There also he selects the location
of the plot where Partition is sought. Then the following page appears, where
he/she has to first select the Mutation type [a case no is generated automatically
for that Mutation]. Then he/she needs to type the Patta No & also to select the
Patta type [generally Kheraj Myadi or Periodic Patta] and tick the appropriate
check box for Possession [DAKHAL], Rajah Adalot etc. Then click Next .
In the next form, he selects the Land Portion for Batowara. When he
selects a Dag no for that Patta in that case, the whole Land portion for the Dag is
displayed and he/she has to type the Land portion to be used for Batowara. When
he focuses Area left for Pattadar for the Pattadar the left Land area for other
Pattadar for that Dag is calculated automatically.
If the Pattadar, who seeks Batowara, don t leave any Land portion there in
the Dag, his name will be marked deleted from that Patta & will appear in the new
Patta. To do so, click the Check box Is Pattadar s name to be strike out from
whom Mutation is sought? . If his land remains in the old Dag also, don t check
it. Then click submit.
Then select the Pattadar, who wants partition & enter their detail, i.e., the
address, land portion etc. Then click Submit . Do the same for all the Pattadar
involved in the case.
Now, if multiple no of Dag is associated in the case, enter the detail of all
the Dag in the same way, & the Pattadar and their Land portion. Finally, click
home to go to Mutation Home. This is the work necessary to be done by the
LM for field Partition.
The Field Partition Process is exactly same as Field Mutation, Here only a
new Patta & a new Dag no is given to each petitioner [Applicant]. The software
automatically generates the new Dag & Patta No, but he should check it & can
modify to make it same as the TRACE map.
Now, when he clicks Click Here , a page appears, clearly showing all the
Field Mutation cases passed by the LM for different Lot ordered by Namjari then
Batowara. Now CO can choose a case and proceed by clicking See LM Report, .
After Clicking on See LM Rep ort, Co has op tion of Keep Pend ing ,
Reject , or Ord er Passed . To Pass an ord er Ord er Passed is clicked
and the next screen gives a d etail of the type of land w ith d ag
no.,area,patta no. and patta type. Order details is to be entered.
In this screen, the CO enters the Order Details. And press submit
button to continue.
The next screen that appears is to enter the occupant details. Here,
CO select the Dag N o. and click on Show Details .
In the occupant details form that appears, CO is to check the details and
click on submit after everything is done.
The above screen informs that all details for Field Partition has
been entered.
1. AST: H e register a petition from a p etitioner and this goes to the CO.
The petitioner gets a receipt for his case.
2. CO: Upon getting a fresh p etition CO first gives a hearing d ate to the
petitioner and during this period the concerned LM has to give a report on
the plot.
3. LM: Then LM p rep ares a rep ort for that case and then w rites it in an
order sheet and forward to respective SK.
4. SK: Based on LM s rep ort SK w rites his/ her report for CO s p eru sal.
5. AST: AST then p rints the hearing notice and circu lates to concerned
parties throu gh the Jari-karok .
6. CO: Finally, CO based on these rep orts, p asses the ord er for conversion
to Period ic Patta. Then he u p d ates the Chitha for reflection of the
conversion order in the Chitha.
Then the Dag entry form appears. Select the Dag no under the Patta
& and type the Land Area to be Converted & submit.
Now, details of the Applicant is to be entered. For that Dag, all the
Pattadar who wants conversion, select & submit one-by-one. If his land
portion rem ains in the old Dag also then select Thakibo & click Abad en
karir tathya grahan karok . If Mu ltip le Dag is associated click Parabarti
d agor tathya grahan karok and enter Dag & App licant d etail in the sam e
way.
Then click Panjikaran Rasid prod an karok to give him the registration
receipt.
For conversion CO logins from m u tation login m enu . Then he/ she
Clicks Office Mu tation, Partition & Conversion and selects Write
proceed ings for fresh petitions and selects a Case u sing Case N o.
Then the follow ing p age ap pears w here he enters the next hearing
d ate and su bm its by clicking Tathya Dakhil Karok . H e can see the
Ap p lication by clicking Abed on patra saok & also d isp ose a case by
selecting the Gosor khariz karok w ith prop er cau se.
Then the follow ing page ap pears, w here he types the rep ort abou t
the p ossession [DAKHAL] of the p etitioner. H e/ she can see the ap plication
as w ell by clicking Abad on p atra Saok . Finally click Pratibed on Dakhil
Karok for su bm it.
action Taken on Proceed ing Ord er from his Mu tation Login. The
following Page appears and he/she writes the note in the space provided.
Then click Enter N ote .
For conversion SK logins from Mu tation login. Then he/ she selects
Write notes on p etitions and clicks a Case N o.
Then based on the LM s rep ort he typ es his rep ort in the follow ing
page. H e can see the LM s rep ort by clicking Mand alor Pratibed on Saok
& the ap plication by clicking Abad on Patra Saok . Finally, after typ ing
he su bm its by clicking Pratibed on Dakhil Karok .
Then AST generates the notices for hearing and d istribu tes it to the
concerned p arties by the Jari-karok w ith the ord er of CO. H e clicks the
link N otice Generation for Petitioners and concerned p arties . The notice
gets displayed and AST takes the printout & proceed further.
d ecid es to give other nu m bers m anually then he can typ e them in the
respective place.
The follow ing p age ap p ears. N ow , d ep end ing on the report of LM,
SK etc. he can give the final ord er for the case or m ake it continu e [su nani
jari rakhok] or Dispose the case [goshor khariz karok]. If he w ant to
continu e, next tim e it w ill app ear on his Mu tation Login as Write final
ord er on the petitions and then selects the case no. H ere also he can all
reports, by clicking the appropriate button.
Now, he can choose that LM will give the report again. In that case it will
again go to the Login of LM. For that purpose, he needs to type a date as next date
of hearing.
If he w ants to give the final ord er, select the op tion Ontim hoku m
d iyak and su bm it by clicking Tathya d akhil karok .
For final ord er, Basic Ord er Details seen app ears w here Ord er N o
and the date is to be entered and submit.
Then fill up the Conversion Order Detail form and submit for all
the petitioner.
Finally, CO need s to u p d ate the Chitha from his Mu tation login &
the resu lt com es into the new Chitha [That Patta of the Dag] becom es
periodic.
In the same way like conversion, CO from his/her Mutation login, Click
Office Mutation, Partition & Conversion and select Write proceedings for
fresh petitions and select Case using Case No.
H ere CO typ es the next d ate of hearing, and su bm its by clicking Tathya
Dakhil karok . If notice is to serve to other p eop le, type in the follow ing
page and su bm it by clicking Sam u h Tathya Dakhil karok .
After that select and w rite N ote of Action Taken on Proceed ing Ord er
and submits his action in a Proper Order Sheet.
Then AST generates the N otice for the concerned p arties. To d o so, Assistant
(AST) from his login clicks on N otice Generation for Petitioners and concerned
p arties against a Case N o.
Then in the HUKUM p age select the Antim hoku m d iyak for final
ord er in the next page and su bm it. If he w ants other op tion, he can
proceed in the same way as conversion.
Then the basic ord er d etails page com es, w here he/ she typ es the
Order No, Order Date etc. in the form and click submit.
Then enter the d etails of the p etitioner in the case. To d o so, select a
Dag no and click Show Details .
Then enter the d etails of the Pattad ar in the case. To d o so, select a
Dag no and click Show Details .
Here enter the Pattadar details for the case and submit.
When all the entry is com p eted a m essage p age com es to tell that
the Mutation Process is completed.
The final step now is for the CO to u p d ate the Chitha from his
Mutation Login menu similar to all cases of mutations.
The Process starts with registration of Petition by the AST and completes
by CO when he passes the order. The operation of each person is sequentially
described below.
Now, select a Dag no and enter the portion of Land for Partition.
Then the following page appears, where he/she gives the next date
of hearing in the sp ace provid ed and su bm it by clicking Tathya Dakhil
Karok .
Then he/she can give hearing notice to some other people related
to the case also in the same way.
The Notice for the case is displayed and AST taking its printout
circulates in the usual way.
LM prepares his report and gives them in the follow ing p age,
w hich he gets from his Mu tation Login and su bm it by clicking
Pratibad on Dakhil karok . In this p rocess he can see the ap p lication also
for the case by clicking Abad on p atra saok .
After Byay Prak Kalan and Report LM has to give a note for the
case. H e w rites them in a p roper ord ered sheet. Typ ing his note in the
prop er place click the bu tton Enter N ote to su bm it.
Then the HUKUM p age app ears w here he selects the option Ontim
hu ku m d iyak and su bm its to give the final ord er. H e/ she can see the
other op tion by clicking the related links in the sam e w ay like Conversion
& Mutation.
Then the applicant s detail page appears. Here the Land portion for the
applicant, his address, new Dag No & new Patta No etc to be entered.
Then Submit. Repeat the same process for all the applicants. If
multiple no of Dag is associated do the same way by selecting the Dag.
H ere in this p rocess the u sers p lay their roles in the follow ing
sequence.
Assistant (AST)
Lot Mandal (LM)
Circle Officer (CO)
Deputy Commissioner (DC)
Circle Officer (CO)
Now Lot Mandal will get the case only after Assistant Registers it.
Similarly, CO will get only after LM, and DC will get only after CO. Finally CO
Updates the Chitha after DC s Approval.
1. Login: First AST login s his/ her accou nt & sees the link for AP Cancel.
4. Dag No: Enter the particular Dag No for the case and then click the
Su bm it bu tton.
5. Pattadar Detail: Select & type all the Pattadar details for that Patta.
1. Login: First the LM login s his/ her accou nt & sees the link for AP
Cancel.
2. LM Report:
When the LM clicks the link in his Login page the LM Rep ort page
com es. H ere he w rites his Rep ort and clicks the Su bm it Button. Before if
he w ants to view the petition registered by the AST, he can see it ju st by
clicking the View Petition Bu tton.
3. View Petition:
In the Petition, m ainly the LM see the p etition & also its statu s
(below the check boxes). There is also another link called Show Chitha
by clicking w hich he can see the Chitha for that Dag also. Then click
Back .
Then he is w rites his Rep ort for the case and clicks the Su bm it
button in the LM Rep ort from . After he su bm its, the link au tom atically
goes to his Mutation Login page.
Thou gh, there are lots of p rocesses for CO, this d oes not m ean that
he have to do it on the same day. On a particular day, he just needs to do a
particular job. The processes are described bellow one-by-one.
Hukum [Order]: Then a new p age ap p ears, w here he has to typ e the
H u ku m or Ord er for that case & give a d ate of H earing and click the
Su bm it .
If he wants, he can see the Petition registered by AST & also the LM
Report just by clicking the provided button.
View Petition: If he w ants to see the p etition & clicks the View Petition
button, then view petition page app ears & here he gets all the d etails
about the applicant. He even can see the Chitha also from the page for that
Dag.
Submit: N ow after verifying, he ju st gives his ord er & the next d ate of
hearing and clicks the Subm it bu tton.
Second Part
The second p art is for the CO to issu e show cau se notice. From
his/ her login page, CO clicks on the corresp ond ing case no. Und er Issu e
Show Cau se N otice
After CO clicks on the case no. to issu e show cau se notice, the
following screen appears.
Third Part
Recommend to DC
The third p art is for the CO to recom m end the case to DC for A.P.
Cancellation from his m enu , u nd er Give Recom m end ation for A.P.
Cancellation by clicking on the concerned case number.
After clicking on the case nu m ber, the follow ing screen ap p ears. On this
screen, CO is to recom m end the case for DC s ap proval by checking the
CO Recom m end ation check box. After that CO clicks the u pd ate bu tton
to pass his recommendation.
Login: From the main menu page, DC logs on with his/her mutation
login account.
From his/ her m u tation m enu as show n above he/ she clicks on the
concerned case nu m ber u nd er Write Rep ort on Cancellation Matter-Click
here link.
After DC clicks on the case nu m ber, the above page app ears
show ing the case d etails for w hich he/ she has to give app roval for AP
Cancellation. DC checks the DC Ap proval check box and clicks the
Update button to give the approval.
On this screen, CO is to select the Dag No. and press the show
details button to continue.
NIC-ASSC-DRISHTI- Version: 1.0 Released on: 12-11-2005 Page 184
DHARITREE-UM of 210
National Informatics Centre User Manual Document General
Assam State Centre ID-NIC-ASSC-DRISTI-DHARITREE-UM For Users
On this screen, CO will check the details and fill up the necessary
fields and click on submit to continue.
The last step in A.P Cancellation is for the CO to u p d ate the Chitha
for AP Cancellation order.
CO is to click on the Up d ate the Cu rrent Chitha w ith AP
Cancellation Record Click here link to u pd ate the Chitha.
The follow ing screen w ith the m essage to confirm that the Master
Chitha has been su ccessfu lly u pd ated .
First, LM/ AST login from the m u tation login of the m enu page of
DHARITREE and click Write Prop osal for Land Reclassification . Then,
the following page appears.
N ow , LM/ AST enters the Prop osal d etails, ie. The new land class,
Prop osed Land Revenu e. Prop osed Local Tax and Revenu e d ifference is
au tom atically calcu lated . LM/ AST clicks Enter Prop osal bu tton to
continue.
He/she clicks on the concerned proposal and the next page appears.
On this p age, CO can view the prop osal for Reclassification (Form
K). H ere the CO is to enter Recom m end ation concerning the case and
passes it on to the DC for further processing.
When DC logs in into his/ her login page from Dharitree m ain
m enu p age. DC w ill find u nd er Recom m end Reclassification Proposals ,
some pending cases for which he/she has to give approval.
After clicking on the concerned proposal no., the next page follows.
From the CO s login, CO w ill now u p d ate the Master Chitha for
ap proved case of reclassification. H e/ she w ill click Up d ate the Chitha
w ith Reclassification Record s .
Then enter the d etail of the Ap plicant and click Generate Receip t .
Then the Receipt is generated. Just print & give the receipt to the
applicant. All the receipts are of the same format.
1. JAMABANDI
See the Jam aband i. If it is OK, Click the Red bu tton other-w ise click back
as per the instruction.
In the next p age, before entering the d ata, he/ she can see the
Jam aband i & Chitha of the ap p licant and then enter the d ata, Dag w ise,
i.e., first Dag No & then his Land portion.
If he/ she chooses to view Chitha, the follow ing page ap pears,
w here he/ she is requ ired to select the Dag no and click Show Chitha .
Then the Certificate app ears as below . Click the Red bu tton to
forward to CO.
3. INCOME CERTIFICATE
Enter the Detail of Income. If no crop is there enter the income got
from proper verification in Other Incom e and click Generate
Certificate .
This tim e click the second link Print a Certificate for CO s Verification .
A. INCOME CERTIFICATE
Docu m entation shall explain the form ats and proced u res for u ser-entered
softw are com m and s, inclu d ing requ ired p aram eters, optional param eters,
default options, order commands and syntax.
Annexures
Annexure A: Glossary
CD : Compact Disk
CD ROM : Compact Disk Read Only Memory
Client : A low end com p u ter and accord ingly the softw are for it are called
called clients.
Chitha : Field Index or Plot wise details register in the State of Assam.
IIS : Internet Inform ation Service, a technology for hosting inform ation
on the web.
ROR : Record of Right a m ain d ocu m ent w hich contains the d etails
abou t ow ners, ow nership rights, p lots and revenu e. This
d ocu m ent m ay be used for m ortgage as w ell as acqu iring loan
against the land held and for judicial purposes.
Land Area Units : 1 Bigha = 5 Katha = 100 (5 x 20) Lessa ( 1 Lessa = 7.4745454
Are in Metric system = 2880 Sqr. Ft.)
LAN : Means Local Area N etw ork . That a com pu ter netw ork , say
within the campus of an organization.
Lot : A group of certain number of villages.
LM : Lot Mand al , the person w ho p rep ares and m aintains the Land
Records Registers for the villages under a particular lot.
Patwari : In some districts( specially in the Barak Valley) in the State of Assam,
a Lot Mandal is known as a Patwari.
SK : The p erson w ho su p ervises a grou p of Lot Mand als is an
SK(Supervisor Kanangu).
Server : A high end com p u ter m achine and accord ingly the softw are for it
are called servers.
RAM : Random Access Memory, a type memory or also called the main
memory.
Error trapping and handling in the software has been carried out. Whenever there
is an error due to technical constraints or unknown reason, the software handles the
problem by showing the error message. Some of them are listed below with their causes
and corrective action to be taken out in that situation.
9. Run-time error 339. Windows Components corrupt or missing. The following assumes you
Component have a Windows CD.
MSWIN SCK.OCX or one of
its dependencies not Go to Start->Run and type
correctly registered.: a file is sfc / scannow in the Ru n
missing or invalid. box and press enter. You
w ill be asked for your
NIC-ASSC-DRISHTI- Version: 1.0 Released on: 12-11-2005 Page 209
DHARITREE-UM of 210
National Informatics Centre User Manual Document General
Assam State Centre ID-NIC-ASSC-DRISTI-DHARITREE-UM For Users
Windows CD to be inserted
in then CD d rive. Then the
com m and w ill d o the
needful to shoot the trouble.
10. Automatic closing of This happens when the maximum of 12 Contact at:
Jam aband i View / Ed it minutes idle time given exceeded. So, to i) asm-hemanta@nic.in
process. avoid this problem , always try to edit data ii) (0361) 2228277, 2226123
without remaining idle for more than 12
minutes. This is also a wastage of precious
server time.