Beruflich Dokumente
Kultur Dokumente
Objective:
Seeking a position as an RF engineer in the area of network planning, Network optimization and
testing of system that provides opportunities to work with State of the Art Technology and
rewards performance.
Profile:
Radio Network Design, Tuning and Optimization: GSM, GPRS/EDGE, WCDMA Networks.
Professional Experience:
1 6 years+ working experience of RF Planning & Optimization and network
performance of GSM, GPRS/EGPRS & WCDMA Networks on Nokia, ALU, Huawei,
Ericsson Equipments with Flexi and Ultra BTS
2 Which include 3 years Exp on NOKIA BSC3i which is 2000 TRX capacity Bsc.
3 Worked on KPI Generation, Counters, and KPI Formula’s
4 Worked extensively on Atoll, NetAct, NEMO, TEMS, Aircom Optima, ACTIX, &
Nokia Optimization Tool.
5 Worked on various projects including Radio Network Design, Swapping of Sites, Street
Cells,
6 Tuning and Optimization of heterogeneous networks, Site Surveys and Drive testing etc.
7 Very good MapInfo, MS Access, XML and MS Excel skills.
Job Responsibilities:
1. Responsible for Nominal Planning and capacity planning, Scrambling code planning,
2. Setting the specific RF parameters for the site to be integrated: RNCid, WBTSid, LcrId,
MCC, MNC, LAC, RAC, SAC, CId, UARFCN frequency
3. NetACT Planner to use for planning all the sites.
4. Verifying all the TSS report to pre Launch steps.
5. Neighbor planning and creating required XML for all 3G sites
6. Finalizing site Design and getting design approvals from customer.
7. Making predictions and updating site information in NetAct for the candidate served
8. Responsible for the Pre Launch Optimization of the sites
9. Performed RF Design to maximize Pilot RSCP, Pilot Ec/Io, Coverage Probability and
Mean Served Erlangs for AMR 12.2 and PS 128 kbps. Minimize Pilot pollution, target
clear cell dominance and proportionate coverage between cells and identify problem areas.
10. Analyze Post Processed KPIs for Call setup success rate, Drop call rate, BLER, HSDPA,
and IRAT using TEMS, and Actix Analyzer.
11. Handling Interference issues by changing tilts, CPICH Power, antenna type, parameters of
site & neighboring sites, parameter adjustments.
12. Analyzing areas of poor RF performance - Pilot Pollution, Signal overshoot, Poor Ec,
Ec/Io and BLER, Site issue, Network issues, Site configuration, Poor uplink, Neighbor
List Inconsistency, SC Inconsistency, IuR links, and others.
13. Were using the software RU20 release.
14. Creating the templates to to make 3G xmls using RU20.
15. Planning all the RU20 parameter plans and setting all the threshold for the RNC to NodeB
16. Updating in the RU20 about the changed parameter and to recommending the changes to
meet the KPI’s and customer requirement.
From May- 09 Organization Huawei India
Sr. RF
Consultant
for :
Huawei, LMT server. Mapinfo 9. KTC Reports
To Sep-10
Aircel 2G
Project in
India
(Bangalore)
Huawei RF
Months 16 Huawei RF Consultant
Consultant
Job Responsibilities:
Job Responsibilities:
1 Worked as a 2G/3G RF Consultant in Jeddah for Zain 2G/3G Pre Launch Project,
Responsible for Pre Launch optimization and planning of 14 Clusters (212 GSM
Sites/2 BSC and with Flexi and Ultra BTS/ 206 WCDMA Sites/1 RNC).
2 Analyzing the SFT (Site Functionality Test) Log files of 2G/using Actix. e.g.-
- Voice calls (2G/3G) and Video Calls (3G) Testing
- MMS (3G), SMS (2G/3G) Testing
- R99 (384 RAB) Downloading and uploading Throughput Testing
- Intra Site & Inter Site HO Testing (2G)
- Intra Site and Inter Sites SHO and PS SHO Testing (3G)
- Inter System HOs Testing (3G)
- Inter BSC & Inter MSC HO (2G) & Inter RNC SHO (3G) Testing
- Identify and rectify the Swap Sectors & Swap Feeders
5 Responsible for analyzing the log files of CDT (Cluster Drive Test) & Optimization and
ADT (Acceptance Drive Test), Optimization with the help of Tilt & Orientation
Change.
6 Preparation of Cluster Acceptance Drive Test Report Through ACTIX
7 Increasing/Decreasing the RSCP Area with the help of arranging the CPICH Power,
Compare RSCP/Rx Level & ECIO/Rx Quality DT Plots with Planning Plots with the
help of NetAct Planning Tool.
8 Calculation of the KPI of the network
9 Sending the Datafills in XML for creation the sites of 2G/3G.
10 Responsible for 2G Parameter Tuning
11 Responsible for follow-up investigations to ensure the modifications to existing Cell Site
configurations and BSS parameters provided the expected improvement to System
Performance.
12 Finding Coverage deficient Areas/ Holes and suggesting remedial measures viz. re-
orientation of Antennas, increasing the Tx Power or issuing Search Rings.
13 Scrambling Code & Frequency Planning (MRP & SFH) & Neighbors’ Planning for
Dual band GSM & 3G Network using NetAct & MapInfo.
14 Post Processing of the Data Collected in Drive Test using ACTIX Tool.
Planning Part
GSM Antenna type & location selection for the sites:-
1 BSC3i Planning
2 In Building Solutions’ Planning
3 Network Capacity augmentation
4 Radio Database preparation & Frequency Planning for new sites
5 Radio Data base parameter changes for optimization
6 Statistics monitoring
7 Implementation of new features into the existing network (e.g. Power
Control, AMR & EDGE)
UMTS:
1 Site Survey, Neighbor Planning, SC planning.
2 UMTS site integration by performing Scrambling Code check, SHO, HHO, Cell
Reselection, inter system handover for CS domain
3 Performing CPICH Ec/Io and CPICH RSCP drive test & analysis for UMTS poor
Coverage zone and Pilot pollution zone
4 Optimizing the antenna orientation and tilt for UMTS coverage and Ec/Io
Enhancement.
From July-06 Organization Leadcom Integrated Solution Pvt. Ltd
Leadcom
2G, NetAct, Actix, NEMO, MapInfo, NetAct Plan
Integrated
To Feb-08 Editor, Reporting Suits, TCPU (Tems cell planner
Solution Pvt.
universal)
Ltd
Sr.Optimization 2G/2.5G/EDGE Network Design &Optimization
Months 19
Engineer Engineer
Job Responsibilities:
Job Responsibilities:
1 Test using TEMS to collect data for Planning and Optimization purpose
2 Drive test using TEMS after Re-homing to check network performance has quality
minimal same as before re-homing.
3 Drive test using TEMS after Cut Over a site to check there is no problem in that site for
making and receiving call.
4 Trouble shooting drive test.
5 Drive test and making performance report for before and after frequency Re-tune.
6 Benchmarking drive test and making report for submit to Nokia.
7 Drive Test and making performance report for before and after BSC Re-Homing.
8 Preparation of Cluster Reports Using ACTIX
.
Trainings:
1 Nokia BSS Parameter & RF Optimization with the help of Actix.
2 Nortel BSS Parameters, Counters, Optimization Techniques & KPI Monitoring.
Educational Qualifications:
1 B.Tech. in Electronics and telecommunication Engineering from Rajkumar Goel Institute
of technology College, Ghaziabad (India) in 2004,
2 10+2 from CBSE Board
3 10th from CBSE Board
Computer Knowledge:
Comfortable with MS Office and Windows.
Personal Details: