Beruflich Dokumente
Kultur Dokumente
HiPath 1100
HiPath 1120
HiPath 1150
HiPath 1190
Analog telephones
DTMF and DP
Explanation of symbols
Symbol Explanation
(
d) If you are using an MF analog telephone, press the Flash key.
ll, q,p... Enter numbers, keys, password, internal or external numbers, etc.
s Start conversation
Numbering Plan
Description HiPath 1120 HiPath 1150 HiPath 1190
Carrier 9
2
KBA.book Seite 3 Freitag, 26. Januar 2007 9:34 09
n p external s
or
2)Wait for (
d ) qil t
Phone rings.
n p external s
Override
Busy extension
np busy (
d ) qjf s
LCR Bypass n qhi p Carrier + number s
Silent Monitoring n qmhh p busy extension s
busy extension
Recall
Activation
1) n p no answer (
d ) qil w t
(Extension does not answer or is busy)
Wait. Phone rings ns
or
2) Wait for wt
Wait. Phone rings ns
Callback n ril t
Deactivation
3
KBA.book Seite 4 Freitag, 26. Januar 2007 9:34 09
Carrier nms
Using a temporary MSN to make a n qhe p MSN slot or MSN number
Call
s(
Parking
d) qij + d.m t
Retrieving a parked n rij + d.m s
call
Toggle s (d) qf s
(Use after consultation, for answering
a second or urgent call)
4
KBA.book Seite 5 Freitag, 26. Januar 2007 9:34 09
EVM:
Miscellaneous functions
Feature Code
Deactivating Features n rd w t
(Call forwarding, do not disturb, head-
set, data protection, alarm clock, recall,
speakerphone auto-answering)
5
KBA.book Seite 6 Freitag, 26. Januar 2007 9:34 09
t
Remote configuration n qmmf w t
HiPath 1100 Manager
qmme w t
The remote programmer must provide:
Relay n qmd t
Activation (only for HiPath 1120)
Relay n rmd t
Activation (only for HiPath 1120)
Alarm clock
Feature Code
6
KBA.book Seite 7 Freitag, 26. Januar 2007 9:34 09
Satellite PABX
Feature Code
s(
Caller ID
(Trace) d ) qlh s
Restriction for sending MSN n qlj t
Activation
7
KBA.book Seite 8 Freitag, 26. Januar 2007 9:34 09
Note 1:
For Korea the numbering plan changes as follows:
a) Access to the group of external lines is done with digit "9" instead of "0";
b) Calling an operator terminal is done with digit "0" instead of "9";
c) Group call pickup is done with sequence "*0" instead of "*57"
d) Recovery of a parked call is done with sequence "*57" instead of "*0";
Note 2:
Feature Codes can be changed with the HiPath 1100 Manager. An expert
should be consulted in this case.
8
KBA.book Seite 9 Freitag, 26. Januar 2007 9:34 09
www.siemens.com/enterprise