Beruflich Dokumente
Kultur Dokumente
R2>
R2>enable
Password:
Password:
Password:
% Bad secrets
R2>
R2>cisco
Translating "cisco"...domain server (255.255.255.255)
% Bad IP address or host name
Translating "cisco"...domain server (255.255.255.255)
(255.255.255.255)
Translating "cisco"...domain server (255.255.255.255)
% Unknown command or computer name, or unable to find computer address
R2>
R2>
R2>
R2>enable
Password:
Password:
Password:
% Bad secrets
R2>show run
R2>show run
R2>show r
R2>show r
R2>show
R2>show
R2>show running-config
^
% Invalid input detected at '^' marker.
R2>
R2>enable
Password:
Password:
Password:
% Password: timeout expired!
% Bad secrets
R2>
System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
Initializing memory for ECC
.
c2811 pPC = 0xbfcd0d54, Cause = 0x2000, Status Reg = 0x3040a803
atform with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC enabled
Upgrade ROMMON initialized
program load complete, entry point: 0x8000f000, size: 0xcb80
program load complete, entry point: 0x8000f000, size: 0xcb80
You must reset or power cycle for new config to take effect
rommon 2 > reset
c2811 platform with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC enabled
enable
configure terminal
hostname R3
interface Serial0/0/0
ip address 192.168.64.10 255.255.255.252
clock rate 64000
no shutdown
interface FastEthernet0/0
ip address 192.168.200.5 255.255.255.0
no shutdown
interface Loopback 0/0
ip address 192.168.205.1 255.255.255.0
clock rate 64000
no shutdown
interface loopback 0
192.168.208.0
interface loopback 0
192.168.209.0
interface loopback 0
192.168.210.0
interface loopback 0
192.168.211.0
interface loopback 0
192.168.212.0
interface loopback 0
192.168.213.0
interface loopback 0
192.168.214.0
interface loopback 0
192.168.215.0
interface loopback 0