Beruflich Dokumente
Kultur Dokumente
User’s Manual
CDVB5110D
Table of Contents
2. Connecting to TV……………………………………………………………………….
5. Trouble Shooting………………………………………………………………………...
2
Important Safety Instructions
Power Supply
Location
Locate the receiver in an indoor location with good ventilation, suitable temperature, no direct sunrays,
low humidity, and low vibration. Unplug the STB during lightening, storms or when unused for long
periods of time.
Place the receiver at least 30cm from the wall & do not put heavy objects or any electrical appliance on
top of the receiver.
Avoid Overloading
Do not overload wall outlets, extension cords or adapters as this can result in fire or electric shock.
The symbol, is intended to alert the user to the presence of un-insulated “dangerous
voltage“ within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons
The symbol is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the product
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
NOTE : if not used for long, please remember to pull out the power cable or turn off the power.
3
Cleaning
Disconnect the STB from the wall socket before cleaning. Use a dry cloth to dust the STB.
Do not insert any kinds of small objects such as coins into the receiver & keep liquids away, as it may
result in short circuit.
Ventilation Openings
The Receiver’s ventilation openings prevent itself from heating. Do not block then as it may cause
malfunctioning. Ensure that free airflow is maintained around the receiver.
4
Connecting STB (SET TOP BOX) to TV
2. Connect the supplied RCA cables to the Set Top Box RCA outputs and your TVs RCA inputs.
5
Controls and Functions
CDVB5110D (Coship)
Front Panel
6
Rear Panel
7
Remote Control Unit (RCU)
Press for EEPG info window Press to display favorite TV list window
11 & 13Move up/down a page in TV program select window 27 & 29 - Volume control when
Key unavailable watching TV
8
Settings and Operations
CDVB5110D (Coship)
Restore Factory Re-Set (Factory Default)
The operation deletes all the data currently saved and settings and returns the system to the
initial status.
Parental Control
9
Favorite Channel Selection
Timer reservations
This function allows to set the time to make the receiver perform the designated actions
including timer based wakeup/sleep the STB.
EPG shows the event information on the current TP channel by time zone. The event is
displayed only at the channel’s that has EPG information. EPG is divided into daily, weekly &
extended mode. When EPG button is pressed daily mode is displayed as a default.
10
Manual Scan
Performance
The function allows verifying the link quality and the power.
11
Trouble Shoots
Seq Fault Identification Possible Cause for Error Possible action (by customer)
No
1 Error Messages - E-04 / E-05 / E-06 / E- Smart Card Problem Remove; Clean contacts; Re-insert
07
2 Error Messages - E-17 Smart Card / STB Mismatch Place the original SIM card in the original STB
3 Error Messages - E-30 Waiting for authorization Wait for 2 minutes and if message does not disappear automatically, call
DTV hotline
4 Error Messages - E-48 / E-52 No Reception check Weather / Dish alignment
5 Error Messages - E-50 No Services Tuned Rescan + Check all TPs level & quality
7 STB - No Power (No LEDs ON) Power unit failure Check power supply
8 STB - No Power (Only red LED is ON) Power unit failure Call DTV hotline
9 STB - STB hanging / 8888 / 0000 / LOCK STB issue Try a factory reset
10 STB - STB Non-responsive STB issue Power reset
11 STB - STB Restarting STB issue Power reset/factory reset
12 Video - Blank (No audio and video) STB not responding/cable error power reset/check AV cables
13 Video - Blank but can see Information Bar MPEG decoding problem Channel swap/power reset/factory reset
14 Video - Black and white only Video standard mismatch Check settings on TV/check STB video output setting(PAL)
15 Video - Abnormal colors video output problem Check settings on TV/check STB video output setting(PAL)/power
reset/factory reset
16 Video - No video but can hear audio video decoding problem check video cable/Channel swap/power reset/factory reset
17 Video - Video freeze STB not responding/signal power reset/channel re-scan/factory reset
interference
18 Video - Some channels / Channel blocks Signal interference Rescan + Check all TPs level & quality
missing
19 Audio - No audio Audio decoding problem power reset/check AV cables
20 Audio - Audio corrupted Audio decoding problem power reset/factory reset/check for loose connections
21 Remote - No response RCU issue Check battery and polarity