Beruflich Dokumente
Kultur Dokumente
Agenda
Safe
Intended purpose
Vault
Operating modes
1.Normal operation mode
2.Programming mode
3.Information menu (opening counter,
battery level, code entry format)
Operation
Operation
Lock opening
Lock programing
Operation
Code entry formats
ID+PIN
00123456
PIN+ID
12345600
Operation
Code Hierarchy
Operation
Code hierarchy (continued)
Operation
Master code
Operation
Manager code
Operation
Duress code
00123456
If the lock is connected to an
external alarm system, a silent
duress alarm (not noticeable for the
aggressor) can be triggered.
Operation
Phantom code
0012345…6
Enter your code as usual (at least the first
7 digits) and keep on adding any
combination
as desired.
Enter the last digit of your code and press
ENTER.
Operation
Locking periods 16 weekly locking period (7 days long
for each)
22 holiday locking period (35 days
long for each)
Duress time delay 0-99 minutes
Locking Automatically: After 6 seconds
Manually: Press the DEL key
Event memory Min. 2400 events, protected against
manipulation and power failure (Non-
volatile).
Power supply 3 Alkaline batteries 1.5 V LR6 (AA,
AM3, E91), service life approx. 3-4
years (with 1 opening/closing cycle
per working day, no load on lock bolt).
Cycle times (lock unit) Opening/closing approx. 2 seconds
FAQ
Q: Should I need to replace my
combination lock?
A: The SL525 lock can replace any lock
type, which include the combination lock,
key lock etc.
Q: Is there any rental plan available
instead of purchase it?
A: Yes.
FAQ
Q: When I program the weekly and
holiday locking period, what is the
interface of them?
A:
FAQ
Do not confuse the “TUE” and “THU” when
you are programming the weekly locking
period.
The information is accessible by pressing the
INFO/ESC key while the display shows “open”
or “locked”. Pressing INFO/ESC will initiate an
6 second auto-display showing…
1. opening counter
2. battery level (% of nominal capacity)
3. Code entry format (ID+PIN or PIN+ID)
Soft Reminder
Change the battery when the battery %
reaches 60% or lower.
Close the safe door and then close the
bolt-work of the safe once the immediate
time lock function is activated.
Soft Reminder