Vergleich von metrischen und imperialen Schraubenmaßen.
Dimensions & Values
Chart for torque and tension forces. Comparison of bolt dimensions metric and imperial. Qualität / Festigkeitsklasse nach DIN Quality / Property class DIN 8.8 10.9 12.9 Vorspann- Vorspann- Vorspann- Dreh- Drehmo- Drehmo- kraft kraft kraft moment ment ment Größe Bolt Bolt Bolt pre- Torque Torque Torque Size preload preload load SW Gewinde A/F Thread Nm kN Nm kN Nm kN 22 M 14 138 52 194 73 235 87 24 M 16 211 71 299 100 358 120 27 M 18 289 87 412 122 490 146 30 M 20 412 111 579 156 696 188 32 M 22 559 139 785 196 941 234 36 M 24 711 160 1.000 226 1.196 271 41 M 27 1.049 211 1.481 296 1.775 356 46 M 30 1.422 256 2.010 360 2.403 433 50 M 33 1.932 320 2.716 449 3.266 539 55 M 36 2.481 375 3.491 528 4.197 633 60 M 39 3.226 451 4.531 634 5.443 761 65 M 42 3.991 516 5.609 726 6.727 871 70 M 45 4.992 604 7.012 850 8.414 1.019 75 M 48 6.021 680 8.473 956 10.150 1.147 80 M 52 7.747 816 10.885 1.147 13.092 1.378 85 M 56 9.650 941 13.582 1.324 16.279 1.589 90 M 60 11.964 1.098 16.867 1.545 20.202 1.853 95 M 64 14.416 1.245 20.300 1.751 24.320 2.099 100 M 68 17.615 1.426 24.771 2.005 29.725 2.406 105 M 72 21.081 1.620 29.645 2.278 35.575 2.734 110 M 76 24.973 1.827 35.118 2.569 42.141 3.083 115 M 80 29.314 2.046 41.222 2.877 49.467 3.452 130 M 90 42.525 2.648 59.801 3.723 71.761 4.468 145 M 100 59.200 3.327 83.250 4.678 99.900 5.614 Alle Angaben ohne Gewähr. Für eventuell auftretende Schäden übernehmen wir keine Haftung. Schraubentabelle imperial - metrisch Bolt chart imperial - metric Schraubenmaße imperial (Zoll) Schraubenmaße metrisch (mm) Bolt dim. imperial (inch) Bolt dim. metric (mm) SW A/F Bolzen Bolt dia. SW A/F Bolzen Bolt dia. 1.1/4“ 3/4“ 32 M 22 1.5/16“ 7/8“ 1.3/8“ 13/16“ 1.7/16“ 7/8“ 36 M 24 1.1/2“ 1“ 1.5/8“ 1“ 41 M 27 1.11/16“ 1.1/8“ 1.3/4“ 1.13/16“ 1.1/8“ 46 M 30 1.7/8“ 1.1/4“ 2“ 1.1/4“ 50 M 33 2.1/16“ 1.3/8“ 2.3/16“ 1.3/8“ 55 M 36 2.1/4“ 1.1/2“ 2.3/8“ 1.1/2“ 60 M 39 2.7/16“ 1.5/8“ 2.9/16“ 1.5/8“ 65 M 42 2.5/8“ 1.3/4“ 2.3/4“ 1.3/4“ 70 M 45 2.13/16“ 1.7/8“ 75 M 48 3“ 2“ 3.1/8“ 2“ 80 M 52 3.3/8“ 2.1/4“ 85 M 56 3.1/2“ 2.1/4“ 90 M 60 3.3/4“ 2.1/2“ 95 M 64 3.7/8“ 2.1/2“ 100 M 68 4.1/8“ 2.3/4“ 105 M 72 4.1/4“ 2.3/4“ 110 M 76 4.1/2“ 3“ 115 M 80 4.5/8“ 3“ 4.7/8“ 3.1/4“ 5“ 3.1/4“ 5.1/4“ 3.1/2“ 130 M 90 5.3/8“ 3.1/2“ 5.5/8“ 3.3/4“ 5.3/4“ 3.3/4“ 145 M 100 6“ 4“ 150 M 105 6.1/8“ 4“ 155 M 110 165 M 115 All indications are not binding. We are not liable for any damage caused. EK 10387 - 063 DE/EN 11-09 Errors and omissions excepted. Subject to change without notice. Druckfehler und technische Änderungen vorbehalten. Abbildungen und Angaben unverbindlich. Umrechnung / Conversion Metrische Einheiten Imperiale Einheiten metric units imperial units Gewicht / weight 1 kg 2.2 lb 0,45 kg 1 lb Länge / length 1m 3.28 ft 0,3 m 1 ft Druck / pressure 1 bar 14.5 psi 0,07 bar 1 psi Volumen / volume 1l 0.26 gal (US) 3,79 l 1 gal (US) Drehmoment / 1 Nm 0.74 ft lbs torque 1,36 Nm 1 ft lbs Kraft / force 1N 0.22 lbs 4,45 N 1 lbs Wichtige Information! Important notice! Die Tabelle Drehmoment/ This chart is only to be applied if Vorspannkraft nur anwenden, no specific instructions or re- wenn keine Hersteller- oder commendations of manufacturer Zeichnungsangaben vorliegen. of equip- ment are available. Alle Werte sind Richtwerte. All values mentioned in this Die Drehmomente und Vor- chart are approx. values. spannkräfte wurden errechnet Quality of bolt material has to be für Schrauben mit Regelgewinde ensured. All values are valid only nach DIN 13 und Kopfauflagen in conjunction with standard nach DIN ISO 4762 und DIN 931, threads according to DIN 13, bolt 6912 und 7990. Außerdem wurde head surface acc. to DIN ISO 4762 die Ausnutzung der Streck- and DIN 931, 6912 and 7990. grenze von 90 % bei einer Figures are calculated for 90 % of Reibungszahl von µ ges. 0,14 = bolt capacity. Friction coefficient neue Schraube, leicht geölt µ 0,14 = new bolts with light berücksichtigt. lubrication.