Beruflich Dokumente
Kultur Dokumente
User Manual
Instructions 06
Software Installation 08
Hardware Installation 12
Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly. In
the event of product failure within its intended use over the course of the
first 1 year after the date of purchase, we will rectify the problem as quickly
as possible once it has been brought to our attention. In the unlikely event
of such an occurrence, or if you require any information about the product
please contact us via our after sales support services, details of which can
be found in this manual and on the product itself.
3. Click “Next”
5. Put in Name, Company Name and Licence Key (from White CD-cover)
and Click “Next”
7. Click “Next
2. Take the USB connector of the device and connect it directly into any
available USB port of the computer.
1. Before launching TotalMedia, please make sure the DUAL DVB-T USB
device has been connected.
2. Total Media is a MCE like software. When launched, you will see
different features on the front panel.
For the first time to use TotalMedia on watching DVB-T TV, the TV program
scanning is required. Please follow the following TV scanning process to
run the TV program scanning.
From the control panel, you can choose the PIP location when you enable
the PIP feature. You can do the recording for big screen TV program, then
switching it to the small screen and record another at the same time.
While Total Media is in full screen mode, you can enable the PBP feature. 2
programs will share the half size of screen.
Please note that the PBP feature will consume the CPU resources a lot. We
recommend that the CPU should be higher than Pentium IV 2.0 GHz, and
the Ram should be higher than 1G.