Beruflich Dokumente
Kultur Dokumente
1. Abstract
This technical report describes a recent change to the OTDR measurement methods employed
by Sterlite Optical Fibers. It details changes to the measurement definition of optical fiber
attenuation, describes the attenuation uniformity measurement and its use, and highlights the
advantages of the improved measurement integrity to the customer.
Continuous improvement to optical fiber manufacturing techniques has steadily reduced fiber
attenuation to record low levels. This, together with the network designers desire to exploit the
full dynamic range potential of installed system links, has driven the requirement for incremental
improvement to attenuation measurement capability. In response, Sterlite Optical Fibers has
upgraded its attenuation measurement capability to industry leading specification.
* PHILLIP COPPIN is Chief Quality Manager at Sterlite Optical Technologies, Aurangabad, India. He holds a
BSc.(Hons) degree from Loughborough University of Technology, UK. Mr. Coppin is an optical/optical technical
expert with 13 years experience gained working for Corning Inc. and British Telecom Research Laboratories.
5. Conclusion
Attenuation measurement methods and OTDR equipment adopted by Sterlite Optical fibers
conform to industry leading specification and measurement definition. This together with
Sterlite’s commitment to product quality and measurement integrity affirms the Sterlite fiber
advantage over competitive offerings.
References
1. TIA/EIA TSB62-5 ITM-5 Characterization of Attenuation Uniformity of Optical Fiber
© December 2002. Sterlite Optical Technologies Ltd, E3 MIDC Waluj Aurangabad 431136, Maharashtra, India
Phone: +91-240-2564599 Fax: +91-240-2564598. Email: ofmarketing@sterlite.com www.sterliteoptical.com
No part of this publication may be reproduced without prior permission of Sterlite Optical Technologies.