Beruflich Dokumente
Kultur Dokumente
6 CORPORATE PARKWAY
GOOSE CREEK , SC . 29445 STYLE NUMBER: GS1404IB
www . quoizel . com
C Hex Nut 1 pc
D Nipple 1 pc G
B
E Lock Washer 1 pc C
F Mounting Ball 1 pc
D
G Shade 4 pcs
E
H Socket Collar 4 pcs
F
I Fixture Body 1 pc H
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package contents
list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement part.
● Estimated Assembly Time: 20 - 30 minutes
● Tool Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape,
Wire cutter, Safety glasses and (4) 100W A19 medium base bulbs .
● Helpful Tools (not included): Wire strippers.
1 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER: GS1404IB
STEP 1: Crossbar
a. Secure the Crossbar to the Outlet Box with Outlet Box
Screws.
Outlet Box
Outlet Box Screw
STEP 2:
a. Thread one Hex Nut onto top end of the Nipple.
b. Place one Lock Washer over the top end of the Nipple
and then thread the Nipple into the center lock hole of
the Crossbar.
c. Using pliers, thread the Hex Nut against the Crossbar
and hand-tighten until snug.
Crossbar Lock Washer
Hex Nut
Nipple
STEP 3:
a. Locate the Backplate onto the Crossbar and slip the
Button Stop on the end of Lanyard into the Slot on the
Crossbar as shown. Crossbar
Button Stop
Slot
Lanyard
Backplate
2 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER: GS1404IB
STEP 4:
Use Wire Connectors (not supplied) to connect the
WHITE OR RIBBED WHITE OR RIBBED
wires.
a. Connect the House Ground Wire to the Fixture Ground FROM HOUSE FROM FIXTURE
Wire.
b. Connect the House White (or Ribbed) Wire to the
Fixture Supply Wire (Black or Smooth Side). BLACK (OR RED) WIRE BLACK OR SMOOTH
c. Connect the House Black (or Red) Wire to the Fixture FROM FIXTURE
FROM HOUSE
Supply Wire (Black or Smooth Side).
d. Wrap each connection with approved electrical tape
and carefully stuff all of the connected wires into the GROUND WIRE GROUND WIRE
Outlet Box.
FROM HOUSE FROM FIXTURE
Backplate
Mounting Ball
3 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER: GS1404IB
STEP 6:
a. Place the Shade over the Socket as shown. Secure by
threading the Socket Collar onto the Socket. Hand-
tighten until snug.
Socket
Shade
Socket Collar
STEP 7:
a. Install correct bulbs referring to fixture markings and/or labels for maximum wattage.
Your installation is completed now. Restore electricity. Retain this sheet for future reference.
4 OF 4