Beruflich Dokumente
Kultur Dokumente
MOTIVE
T Y P I C A L A P P L I C AT I O N S 1/2” FNPT
The Watson McDaniel WPT Pump-Trap Combinations are excellent
for draining heat exchangers or other equipment that is being fed by
a temperature regulator or a temperature control valve. In these
applications, the steam pressure in the heat exchanger may not be 1” FNPT OUTLET
sufficient to overcome the back pressure in the condensate return line.
When this condition occurs, the pressure powered pump takes over
and uses high pressure steam supplied to the pump to discharge the
condensate through the trap. When sufficient pressure does 11/2” FTE-200 TRAP
exist, the system functions like a standard steam trap.
P U M P - T R A P F E AT U R E S
141/8”
• Steam trap and pump are pre-mounted together on 4”
a single base for easy installation
• Engineering and selection is simplified.
28”
428 Jones Boulevard • Limerick Airport Business Center • Pottstown PA • 19464 • Tel: 610-495-5131 • Fax: 610-495-5134
76 www.watsonmcdaniel.com
NON-ELECTRIC CONDENSATE PUMPS
WPT2 - 11/4” x 11/4” (PMPM with 2” FTE200) WPT3 - 11/2” x 11/2” (PMPLS with 2” FTE200)
VENT VENT
1/2” FNPT 1” FNPT
25”
25”
PUMPS
MOTIVE MOTIVE
1/2” FNPT 1/2” FNPT
2” FTE-200 TRAP
141/8” 24”
31/2”
31/2”
28”
28”
VENT
1” FNPT VENT
1” FNPT
25”
25”
MOTIVE
1/2” FNPT MOTIVE
1/2” FNPT
2” FNPT OUTLET
2” FNPT OUTLET
8” 51/4”
28” 28”
428 Jones Boulevard • Limerick Airport Business Center • Pottstown PA • 19464 • Tel: 610-495-5131 • Fax: 610-495-5134
www.watsonmcdaniel.com 77