Beruflich Dokumente
Kultur Dokumente
Pomona Performance
www.pomonaelectronics.com
Table of Contents
2
3 New Products
5 Customized Products
has been
40 Patch Cords and Test Leads
synonymous with
products by using
84 IC Test Clips and Adapters
only the finest
at your side.
www.pomonaelectronics.com
New Products
3
RF SMA Connectors RF SMB Connectors
SMA connectors are compact and durable, with a SMB connectors have the added advantage of
bandwidth of DC to 12.4 GHz on flexible cables. snap-on coupling rather than threads which make
it great for fast connect and disconnect.
SMA 50Ω Within Series Adapters SMB 50Ω and 75Ω Plugs,
Straight Crimp
Shown on page 22
Shown on page 21
Shown on page 21
Shown on page 22
MCX 50Ω Jack, Straight Surface MMCX 50Ω Plug, Straight Edgecard
Mount Receptacle
Shown on page 23
Shown on page 24
www.pomonaelectronics.com
New Products
Pomona's quality
connectors and
test accessories
reliable signal
is demanded.
Featuring an ergonomic design with comfort grip, With a CAT II, 600V (CAT III, 300V) rating,
fully insulated, and with a 500 MHz bandwidth, these these probes are perfect for use with portable
probes provide plenty of headroom for those high oscilloscopes.
frequency measurements. Shown on page 77
Europe
www.pomona.cc
Technical Support
U.S.
technicalsupport@
pomonatest.com
Europe Featuring a new, compact, ergonomically designed probe handle, these modular
+31(0) 40 2675 150 general purpose passive voltage probes are ideal for use with a wide variety of
oscilloscopes.
Rest of World Modular in design, the probe handle is capable of receiving a variety of
1-425-446-5500 spring-loaded and fixed tips, providing greater testing versatility.
Shown on pages 76-77
www.pomonaelectronics.com
Customized Products
Pomona responds to a wide range of special or custom requirements by
providing accessories tailored to your needs. Whether we simply modify
an existing catalog product or create a unique combination of products,
we use only the finest materials to delier top qulity products.
www.pomonaelectronics.com
Coaxial Cable Assemblies
and Breakouts
Pomona is the professional’s choice, whether in the lab, plant or in the
field. Using high-quality materials such as beryllium copper, gold and nick-
el plating ensures the precision you rely on. With a huge selection
of cables and breakouts offering almost every connector
6 and clip combination, Pomona provides you the
solution for any application.
2.71in 3.50in
(68.83mm) (188.9mm)
Capacitance Stranding
Cable Impedance per 1ft/ Insulation/ Strands Wire Jacket Temperature
Designation Type Ω 0.304m Dieletric AWG X AWG Type Material Cable O.D. Shield (w/o connectors)
A twisted pair, 2 NA 27.0 pf PVC 18 65X36 TC PVC 0.25in (6.35mm) NA -4 to 221°F (-20 to +105°C)
conductor
C Coax, RG58C/U 50 30.8 pf PE 20 19X36 TC PVCNC 0.195in (4.95mm) TCB -40 to 185°F (-40 to +85°C)
E Coax, RG59B/U 75 22.5 pf PE 23 Solid BCCS PVCNC 0.242in (6.15mm) BCB -40 to 140°F (-40 to +60°C)
J Microphone, 2 90 18 / 32 pf* PE 22 16X34 TC PVC 0.231in (5.84mm) TCB -40 to 176°F (-40 to +80°C)
conductor,
shielded
K Coax, RG174/U 50 30.8 pf PE 26 7X34 BCCS PVC 0.110in (2.79mm) TCB -40 to 167°F (-40 to +75°C)
T Coax, RG214/U 50 30.8 pf PE 13 7X22 SPC PVCNC 0.425in (10.8mm) SCCB/SCCB -40 to 176°F (-40 to +80°C)
X Coax, RG142B/U 50 29.0 pf TFE 18 Solid SPCCS FEP 0.195in (4.05mm) SPC/SPC -94 to 392°F (-70 to +200°C)
Y Coax, RG223/U 50 30.8 pf PE 19 Solid SPC PVCNC 0.212in (5.38mm) SCB/SCB -40 to 140°F (-40 to +60°C)
BB Coax, RG316/U 50 29.0 pf TFE 26 7X37 SPCCS FEP 0.096in (2.44mm) SPC -94 to 392°F (-70 to +200°C)
SS Coax, RG58/U, 50 37.0 pf CPE / PE 22 7X30 TC PVC 0.195in (4.95mm) BAF/TCB -40 to 176°F (-40 to +80°C)
low noise
V Coax, RG59/U 75 20.4 pf PE 23 Solid BCCS PVC 0.242in (6.15mm) BCB -40 to 176°F (-40 to +80°C)
Triaxial Coax, RG 58A/U, 50 30.8 pf PE / PE 20 7X28 TC PVC 0.240in (6.10mm) TCB / TCB- to 167°F (-40 to +75°C)
double shielded 40
* Capacitance between conductors / Capacitance between conductor and shield
AWG = American Wire Gauge FEP = Fluorinated Ethylene Propylene PVCNC = Polyvinyl Chloride Non SPCCS = Silver Plated Copper Covered Steel
BAF = Bonded Aluminum Foil Polyester Tape OD = Outside Diameter Contaminating SSPE = Semi-Solid Polyethylene
BCB = Bare Copper Braid NA = Not Applicable SCB = Silver Coated Braid TC = Tinned Copper
BCCS = Bare Copper Covered Steel PE = Polyethylene SPC = Silver Plated Copper TCB = Tinned Copper Braid
CPE = Conductive Polyethylene PVC = Polyvinyl Chloride SCCB = Silver Coated Copper Braid TFE = Tetrafluoroethylene
www.pomonaelectronics.com Ratings: The components in this section have a hands free rating for use in controlled voltage environments.
However, for CE compliance these products are not intended for hand held use at voltages above 33 Vrms/70 Vdc.
Coaxial Cable Assemblies and Breakouts
Length 50Ω Cable O.D. 50Ω Cable O.D. 75Ω Cable O.D. 50Ω Cable O.D. 50Ω Cable O.D.
BNC Male Cable with Molded .195in (4.95mm) .206in (5.23mm) .242in (6.15mm) .100in (2.54mm) .195in 4.95mm)
Strain Relief RG58C/U RG223 RG59B/U RG174/U RG58C/U
.5ft (0.2m) 2249-C-6 2249-E-6 2249-K-6 7
3.37in (85.60mm) 1ft (0.3m) 2249-C-12 2249-Y-12 2249-E-12 2249-K-12
2ft (0.6m) 2249-C-24 2249-Y-24 2249-E-24 2249-K-24
3ft (0.9m) 2249-C-36 2249-Y-36 2249-E-36 2249-K-36
4ft (1.2m) 2249-C-48 2249-Y-48 2249-E-48 2249-K-48
5ft (1.5m) 2249-C-60 2249-Y-60 2249-E-60 2249-K-60 5266-C-60
6ft (1.8m) 2249-C-72 2249-Y-72 2249-E-72 2249-K-72
8ft (2.4m) 2249-C-96 2249-Y-96 2249-K-96
10ft (3.0m) 2249-C-120 2249-Y-120 2249-E-120 2249-K-120
12ft (3.7m) 2249-C-144 2249-Y-144 2249-E-144
15ft (4.6m) 2249-C-180 2249-Y-180 2249-E-180 2249-K-180
20ft (6.1m) 2249-C-240 2249-Y-240 2249-E-240 2249-K-240
25ft (7.6m) 2249-C-300 2249-E-300 2249-K-300
30ft (9.1m) 2249-C-360 2249-E-360
50ft (15.2m) 2249-C-600 2249-E-600
Rating: Maximum voltage for hands free use: 500 Vrms*, +122˚F Model 2249-C is Pomona Electronics’ Model 2249-E RG59B/U is a 75Ω Model 5266-C is the same high
(+50˚C) max., (“Y” Cable 176°F (+80°C).) most popular cable. The 50Ω cable, making it the right choice quality construction as
RG58C/U cable makes it ideal for most for use with TV, video and LAN Model 2249-C with a connector
BNC: Body: tarnish resistant nickel-plated brass; test and measurement applications. applications. on (one end only.)
Center Contact: gold-plated brass; Dielectric: PTFE.
Model 2249-Y is a 50Ω RG223/U Model 2249-K RG174/U offers
Strain Relief: PVC molded directly to cable and connectors. cable with double shield. Use when superior flexibility in a 50Ω cable.
See chart on page 6 for additional wire and cable specifications. additional shielding is required.
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow, *see rating message at start of section. www.pomonaelectronics.com
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
Coaxial Cable Assemblies and Breakouts
Model# Length
BNC Male Right Angle
4276-C-12 12in (0.3m)
Connector Cable with Model# Length
4276-C-24 24in (0.6m) BNC Male 50Ω Cable with
Molded Strain Relief 6253-C-36 36in (0.9m)
4276-C-36 36in (0.9m) Insulated Push-on Connector
3.98in (101.09mm) Unique locking feature assures
Rating: Maximum voltage for hands secure retention with the conve-
free use: 500 Vrms*. 3.67in (93.22mmmm)
nience of a push-on connector.
BNC: Body: tarnish resistant nickel- Rating: Maximum voltage for hands
plated brass; Center Contact: gold- free use: 500 Vrms*.
plated brass; Dieletric: PTFE.
1.09in BNC: Body: tarnish resistant nickel-
(27.68mm) Strain Relief: PVC molded directly plated brass; Center Contact: gold-
to cable and connectors. plated brass; Outer Shell: blue
See chart on page 6 for additional thermoplastic; Dieletric: PTFE.
wire and cable specifications. Strain Relief: PVC molded directly
to cable and connectors.
See chart on page 6 for additional
wire and cable specifications.
Model# Length
BNC Male to BNC Male Right
1383-C-24 24in (0.6m)
Angle 50Ω Cable
1383-C-60 60in (1.5m)
1.60in
(40.64mm) Model# Length
BNC Male to BNC Female
Rating: Maximum voltage for hands 4524-C-36 36in (0.9m)
free use: 500 Vrms*. with Molded Strain Relief
4524-C-48 48in (1.2m)
BNC: Body: tarnish resistant nickel- 4524-C-60 60in (1.5m)
plated brass; Center Contact: gold-
plated brass; Dieletric: PTFE.
Use to extend BNC Cables.
See chart on page 6 for additional 3.58in (90.93m)
wire and cable specifications. Rating: Maximum voltage for hands
free use: 500 Vrms*.
1.06in
(26.92mm) BNC: Body: tarnish resistant nickel-
plated brass, Center Contact: male:
gold-plated brass; female: gold-
plated beryllium copper; Dieletric:
PTFE.
Strain Relief: PVC molded directly
to cable and connectors.
See chart on page 6 for additional
wire and cable specifications.
RG 316/U Length
SMA Male Right Angle
4813-BB-24 24in (0.6m)
50Ω Cable 0.90in
(22.86mm) SMA: Body/Fittings: passivated
stainless steel; Contact: gold-plated
brass; Dielectric: PTFE.
See chart on page 6 for additional
wire and cable specifications.
Model# Length
Insulated BNC Male / 4mm BNC Male to ... the ends listed below
72927-C-40 40in (100cm)
Shrouded Plugs
72927-C-80 80in (200cm)
12 2.28in
(58mm)
Impedance: 50Ω.
3.37in (85.60mm)
Rating: 500V Cat I, 150 V Cat II, 3A.
Color: Black. 1st End: Crimp BNC Male with Molded Rating: Maximum voltage for hands free
Strain Relief. use: 500 Vrms*.
Body: tarnish resistant nickel-plated BNC: Body: tarnish resistant nickel-plated
brass; Center contact: gold-platedbrass; brass; Center Contact: gold-plated brass
Impedance: 50Ω, Boot, PVC; Color: black.
Strain Relief: PVC molded directly to cable
Cable Type C: RG58C/U and connectors.
Rating: 33 Vrms / 70 Vdc, 6A. Ideal for use with binding posts.
2.13in (54mm) 2nd End: Sheathed Banana Plugs.
Color: Black.
Body: nickel-plated brass beryllium
copper spring; Insulation: nylon.
2.72in (69.09mm) See chart on page 6 for additional
wire and cable specifications.
7.92in (201.17mm)
Model# Length
BNC Male with Molded
4945-K-18 18in (0.5m)
Strain Relief to Square
4945-K-24 24in (0.6m)
Pin Receptacles
4945-K-36 36in (0.9m)
7.92in 0.52in
(13.21mm) 4945-K-48 48in (1.2m)
(201.17mm)
4945-K-60 60in (1.5m)
2.13in (54mm)
2nd End: 0.025in (0.6mm)
Square Pin Receptacles
Center Contact; gold-plated brass;
Insulation: ABS; Colors: one black
and one red.
2.19in (55.63mm) 0.10in (2.54mm)
See chart on page 6 for additional
wire and cable specifications.
Model# 72931
SMA Adapter Kit
A consolidated kit including the
most frequently used SMA adapt-
ers in a rugged pistol-grip case.
Allows for direct adaptation without
intermediate couplers. All parts are
precision machined brass, not die-
cast, with tarnish resistant nickel
plating. Male center pin contacts are
Adapter Kit Accessories Individual adapters for the Universal
gold plated brass. Female center
Adapter Kits are also available.
contacts are gold plated heat treated
Coupling nut Coupling nut beryllium copper. Insulation material
adapter to Model# 5698 5748 adapter to Model# 5698 5748 is high density PTFE.
BNC (m) 5735 2 2 Mini UHF (m) 5753 2
BNC (f) 5739 2 2 Mini UHF (f) 5757 2
TNC (m) 5736 2 2 RCA (m) 5754 2
TNC (f) 5740 2 2 RCA (f) 5758 2
SMA (m) 5737 2 2 F (m) 5759 2
SMA (f) 5741 2 2 F (f) 5755 2 Kit contains:
4282 Right Angle SMA Female to SMA Male 4292 SMA Male to TNC Male
N (m) 5734 2 2 Coupler 5742 4 6
4283 Inline SMA Male to SMA Male 4293 SMA Female to TNC Male
N (f) 5738 2 2 Dbl Banana Plug 5743 1 1 4284 Inline SMA Female to SMA Female 4294 SMA Male to TNC Female
UHF (m) 5752 2 Dbl Banana Post 5744 1 1 4286 SMA Male Terminator Plug 4295 SMA Female to TNC Female
4288 SMA Male to BNC Male 4296 SMA Male to N Male
UHF (f) 5756 2 Sampler 5760 1
4289 SMA Female to BNC Male 4297 SMA Female to N Male
4290 SMA Male to BNC Female 4298 SMA Male to N Female
4291 SMA Female to BNC Female 4299 SMA Female to N Female
www.pomonaelectronics.com Ratings: The components in this section have a hands free rating for use in controlled voltage environments.
However, for CE compliance these products are not intended for hand held use at voltages above 33 Vrms/70 Vdc.
RF Coaxial Connectors, Adapters and Kits
Model# 5510
Kit contains BNC to Banana Plug and
6737 75Ω BNC f/f Adapter 1297 Adapter, BNC(f), Phono Plug Binding Post Adapter Kit An assortment of many of Pomona’s most
6738 75Ω BNC f/f/f Adapter 3837 BNC (f)/Tini Plug popular BNC
6739 75Ω BNC f/m/f Adapter 4043 Adapter, BNC(M), Phono Jack Kit contains one each:
6740 75Ω BNC m/m Adapter 4267 BNC (f)/Microplug BNC Female to Stacking Double Banana Plug
6754 BNC (F/M/F) Adapter, In-Line, 75Ω 5319 BNC Female to Phono Plug BNC Male to Stacking Double Banana Plug
6779 BNC (m) / f (f), 75Ω 4054 BNC (m) to Phono Jack Adapter BNC Male to Stackable Binding Posts
6780 BNC (f) / f (f), 75Ω 4719 BNC (f)/Bantam Plug BNC Female to Stackable Binding Posts
6781 BNC (f) / F (m), 75Ω 5008 BNC (f)/.090 Video Plug BNC Female to Female
6782 BNC (m) / F (m), 75Ω 6519 BNC TO Mini-WECO Adapter BNC Male to Male adapters.
3840-75 BNC (m) Resistor Terminator
Plug, 75Ω
Model# 5513
BNC 50Ω Attenuator Kit
Kit contains five Model 4108 BNC 50Ω
attenuators, one each of 3dB, 6dB, 10dB,
14dB and 20dB.
(Same as Model 4108).
Model# 1452
BNC Female to Stackable
Binding Posts Rating: Maximum voltage for
Model# 1270 hands free use: 500 Vrms*, +122˚F
BNC Male to Double
(+50˚C) max.
Stacking Banana Plug Rating: Maximum voltage for
hands free use: 500 Vrms*, +122˚F 1.19in 0.75in
(+50˚C) max. (30.27mm) (19.05mm)
1.13in 0.75in Material: Banana Plug Jack: brass;
(28.70mm) (19.05mm) Spring: heat treated berylliumcop-
per; Finish: nickel plating. 2.30in (58.42mm)
(open)
2.20in (55.88mm)
Model# 1469
BNC Male to Stackable
Model# 1468
Isolated Binding Posts 4 solder turrets for component
BNC Female to Double with 4 Terminals attachments.
Banana Plug 4 solder turrets provide access Use to make your own attenuator,
between BNC and isolated banana 0.42in balun, or filter.
2.05in (52.07mm) plugs. (10.67mm)
Rating: Maximum voltage for
Rating: Maximum voltage for 0.75in hands free use: 500 Vrms*, +131˚F
0.75in hands free use: 500 Vrms*, +131˚F (19.05mm) (+55˚C) max.
(19.05mm) (+55˚C) max.
BNC: isolated from Banana Plugs.
2.48in (62.99mm)
0.42in (10.67mm) Material: Banana Plug Jack: brass; (open)
Spring: heat treated berylliumcop-
per; Finish: nickel plating.
Model# 3430-*
BNC Male with Binding Post
Rating: Maximum voltage for
0.44in hands free use: 500 Vrms*, +239˚F
Model# Type
Insulated BNC Male to Dual (11.18mm) (+115˚C) max.
72910 Plugs
4 mm Banana Plugs/Jacks *Std. Colors: -0 Black, -2 Red.
72937 Jacks 1.55in
(39.37mm)
1.34in Rating: 500V Cat I, 150V Cat II.
(34mm) Model# 1894
BNC Female to Single
Banana Plug Rating: Hands free testing in
2.5in controlled voltage environment:
(63mm) 0.50in 500 Vrms*, +122˚F (+50˚C) max.
(12.70mm)
Model# 1296
BNC Male to Stackable Model# 3296
Binding Posts Rating: Maximum voltage for BNC Male to Miniature
hands free use: 500 Vrms*, +122˚F Stackable Binding Posts Binding posts also accept miniature
(+50˚C) max. double banana plugs.
Rating: Maximum voltage for
0.75in 0.88in
1.19in (22.35mm) hands free use: 500 Vrms*, +122˚F
(30.27mm) (19.05mm) (+50˚C) max.
0.50in
(12.70mm)
2.49in (63.25mm) 1.93in (49.02mm)
(open) (open)
Model# 5511
BNC Within Series
Adapter Kit An assortment of Pomona’s popular
Model# Ω BNC within series adapters.
Type N Male Terminator
4240-50 50 Kit contains one each:
Plugs
BNC Female to Female 3283
2.07in Rating: Frequency Range DC to
(52.58mm) BNC T (Female/Female/Female) 3284
500 MHz, Power: 1W @ 158°F BNC T (Female/Male/Female) 3285
(70˚C) max. BNC Male to Male 3533
Accuracy: 1%. BNC Right Angle Male to Female 3534
BNC T (Male /Female/Female) 4896
Model# Ω
BNC Male Terminator Plugs
3840-50 50
3840-75 75
Model# Type
1.44in Rating: Frequency range dc to BNC Shorting Cap or Dust
5085 Shorting cap
(36.83mm) 500MHz, power .5W @ 158°F Cap for BNC Female
(70˚C) max. 3839 Dust cap
Accuracy: 1%.
Shorting cap provides protection and
supplies a short across an input.
Dust cap protects sensitive instrument
inputs and is non-shorting.
Tarnish resistant plating.
3in (76.20mm) long chain.
Model# Ω
BNC Feed-Thru Termination
4119-50 50
1.45in 4119-75 75
(36.83mm) 4119-93 93
4119-600 600
Fig. 2: Crimp Style Fig. 4: Crimp Style 6702A BNC (m) 4 59B, 20 AWG, Belden 1505A
6703A BNC (m) 4 6B, 18 AWG, Belden 1694A
6704A BNC (m) 4 59B, 23 AWG
6746A BNC (m) 1 59, 59A, 59B, 62, 210, Belden 8241, 8263
6752A BNC (m) 2 59A, 59B, 62, 210, Belden 8241, 8263
7042 BNC (m) 2 Belden 1407B, 1417B, 1164B, 1167B, 1418B,
11467B, 11865A
1.32in 1.30in
(33.53mm) (32.90mm) 0.50in (12.70mm)
Panel
PanelCut-Out
Cut-Outfor
3283/6737 6705 3846 / 3847 / 6744
for 3846/3847
Max. Panel
BNC Bulkhead Receptacles Model# Type Special Features Thickness
50Ω Impedance
0.375in 3778 Isolated Ground, 0.18in (4.57mm)
1.08in (27.43mm) 1.24in (31.50mm) 1.21in (30.73mm) (9.52mm) BNC (f)
Teflon Insulation
5148 Isolated Ground, 0.175in (4.45mm)
BNC (f)
0.35in Valox Insulation
(8.89mm) 4159 Hermetically Sealed* 0.37in (9.40mm)
BNC (f)
Panel Cut-Out
Cut-Out for 4160 0.10in (2.54mm)
4160/6745 4159/6741 4979 5148 4979 BNC (m) 0.19in (4.83mm)
75Ω Impedance
6741 BNC (f) Isolated Ground
1.10in (27.94mm) 0.50in 6745 BNC (f)
(12.7mm) 1.32in (33.53mm)
* Leakage rate less than 10-7 cc/sec of tracer gas at one atmosphere.
BNC: Body: tarnish resistant nickel-plated brass; Center Contact:
0.47in male: gold-plated brass; female: gold-plated beryllium copper
(11.95mm) (except as noted); Dielectric: PTFE.
RF SMA Connectors
Bandwidth: 0-12.4 GHz on flexible cable. (see data sheet on website)
21
Rating: For CE compliance and personal safety, do not hold in hand when voltages exceed 33 Vrms/70 Vdc. Maximum voltage for hands free use:
500 Vpeak: RG58, 141, 143; 375 Vpeak: RG174, 188, 316. Do not use on circuits where transient stresses can exceed the rated voltage.
Materials: Body: machined brass, gold-plated finish; Center Contacts: plug: gold-plated brass; jack: gold-plated beryllium copper.
Above specifications apply to the models on this page
72965
72967
Model# Cable Group
SMA 50Ω Jack, Straight Crimp RG_/U
0.55in (14.0mm) 72952 141 Model# Description
72953 142, 400
SMA 50Ω T Type
72968 Jack (f)/
72954 174, 188, 316 0.76in Jack (f)/Jack (f)
0.76in (19.2mm) 72969 Jack (f)/Plug (m)/
(19.2mm) Jack (f)
0.56in 0.68in
Model# Cable Group
SMA 50Ω Jack, Bulkhead Crimp RG_/U (14.3mm) (17.3mm)
72963 72970
SMA 50Ω Jack, SMA 50Ω Jack,
Straight PCB Straight PCB
Receptacle Receptacle Edge
Model# Description
SMA 50Ω Jack, Panel Mount
72961 2 Hole
Receptacle 0.53in (13.5mm) 0.53in (13.5mm)
72962 4 Hole
1.07in (27.3mm)
72971
SMA 50Ω Jack, 0.58in (14.8mm)
Right-Angle
PCB Receptacle
0.53in
(13.4mm)
RF SMB Connectors
Bandwidth: 3-4 GHz, depending upon connector. (see data sheet on website)
22
Rating: For CE compliance and personal safety, do not hold in hand when voltages exceed 33 Vrms/70 Vdc. Maximum voltage for hands
free use: 250 Vrms. Do not use on circuits where transient stresses can exceed the rated voltage.
Materials: Body: machined brass, gold-plated finish; Center Contacts: plug: gold-plated brass; jack: gold-plated beryllium copper.
Above specifications apply to the models on this page except 5375
0.45in
(11.4mm)
0.54in
(13.6mm)
Model# 5375
SMB Female Connector
Crimp Type This SMB (Subminiature “B”) connector snap
together for quick assembly.
Fit Cable Types: RG174, 179, 187, 188, 316
1.22in (30.99mm)
Model# Ω Cable Group Rating: Maximum voltage for hands free use:
SMB Jack, Bulkhead RG_/U 335 Vrms*, -85˚F to +329˚F (-65˚C to +165˚C).
73000 50 174, 188, 316 Impedance: 50Ω.
1.12in (28.5mm)
73001 75 179, 187 Frequency Range: DC to 4GHz.
SMB: Shell: tarnish resistant nickel- plated
brass; Contact: male: gold- plated brass;
female: gold-plated beryllium copper;
Dieletric: PTFE.
RF MCX Connectors
Bandwidth: 3-6 GHz, depending upon connector. (see data sheet on website.)
23
Working Voltage: For CE compliance and personal safety, do not hold in hand when voltages exceed 33 Vrms/70 Vdc. Maximum voltage
for hands free use: 170 Vrms. Do not use on circuits where transient stresses can exceed the rated voltage.
Materials: Body: brass, gold-plated finish; Center Contacts: plug: gold-plated brass; jack: gold-plated beryllium copper.
Above specifications apply to the models on this page
0.30in
(7.7mm)
0.36in
(9.2mm)
RF MMCX Connectors
Bandwidth: 3-6 GHz, depending upon connector. (see data sheet on website.)
24
Working Voltage: For CE compliance and personal safety, do not hold in hand when voltages exceed 33 Vrms/70 Vdc. Maximum voltage
for hands free use: 170 Vrms. Do not use on circuits where transient stresses can exceed the rated voltage.
Materials: Body: brass, gold-plated finish; Center Contacts: plug: gold-plated brass; jack: gold-plated beryllium copper.
Above specifications apply to the models on this page
0.31in
(7.9mm)
73028 73038
MMCX 50Ω MMCX 50Ω
Jack, Right- Plug, Straight
Model# Cable Group Angle PCB Edgecard
MMCX 50Ω Plug, Straight RG_/U
Semi-Rigid Crimp Receptacle
73034 402
0.28n 0.30in (7.7mm)
73035 405 (7.0mm)
0.53in (13.5mm)
0.28in
(7.0mm)
0.34in
(8.6mm)
Model# Type
Type N Adapters
3841 N (f/f)
1.29in 1.77in
1.44in 1.60in (32.77mm) (44.96mm) 3842 N (m/m)
(36.58mm) (40.64mm) 3843 N (f/m)
25
5089 N (f/f/f)
1.28in 1.28in
(32.51mm) (32.51mm) N: Body: bronze-plated white brass; Center
Contact: male: gold-plated brass; female:
gold-plated beryllium copper; Dieletric: PTFE.
Impedance: 50Ω.
3841 3842 3843 5089
Rating: Maximum voltage for hands free use:
1,000 Vrms*.
Model# Type
Type N Panel Mount Receptacle
2455 N (f)
4956 N (f)
1.35in 0.718in 1.35in 0.718in
(34.29mm) (18.24mm) (34.29mm) (18.24mm) N: Body: bronze-plated white brass; Center
ø 0.125in ø 0.125in Contact: female: gold-plated beryllium copper;
(3.18mm) (3.18mm)
Dieletric: PTFE.
ø 0.641in ø 0.641in Impedance: 50Ω.
(16.28mm) (16.28mm) Rating: Maximum voltage for hands free use:
1,000 Vrms*.
2455 Panel Cut-Out 4956 Panel Cut-Out
for 2455 for 4956
Cut-Out
5290 5178 for 5178
Model# Type
F within Series Adapters
6712 F (m/f) Right angle
1.0in 0.92in 6713 F (m/f) In line,
(25.4mm) (23.3mm)
Push-on
6712 6713
Model# Type
SMA to BNC
4288 SMA (m) to BNC (m)
4290 SMA (m) to BNC (f)
1.06in 1.03in 1.25in 1.00in 4289 SMA (f) to BNC (m)
27
(26.92mm) (25.16mm) (31.75mm) (25.40mm)
4291 SMA (f) to BNC (f)
Model# Type
SMA to Type N
4296 SMA (m) to type N (m)
1.30in 1.21in 1.28in 1.17in 4298 SMA (m) to type N (f)
(33.02mm) (30.73mm) (35.12mm) (24.72mm)
4297 SMA (f) to type N (m)
4299 SMA (f) to type N (f)
Model# Type
SMA to TNC
4292 SMA (m) to TNC (m)
1.06in 1.03in 1.17in 1.06in
(25.16mm) (29.72mm) (26.92mm) 4294 SMA (m) to TNC (f)
(26.92mm)
4293 SMA (f) to TNC (m)
4295 SMA (f) to TNC (f)
Model# Type Ω
SMA to SMB
72976 SMA (m) to SMB (m)
72977 SMA (m) to SMB (f)
0.81in 0.87in 0.70in 0.76in 50
(20.6mm) (22.2mm) (17.9mm) (19.2mm) 72978 SMA (f) to SMB (m)
72979 SMA (f) to SMB (f)
Model# Type
BNC to F
6779 BNC (m)/F (f)
1.00in 1.05in 1.25in 1.22in 6780 BNC (f)/F (f)
(25.40mm) (26.67mm) (31.75mm) (31.0mm) 6781 F (m)/BNC (f)
6782 BNC (m)/F (m)
Model# Type
Triaxial to BNC
5299 3 Lug Triax (f)/BNC (m)
adapter
1.37in (34.80mm) 1.50in (38.10mm) 1.35in (34.29mm) 1.35in (34.29mm)
28 5298 2 Lug Triax (f)/BNC (m)
adapter
5090 BNC (f)/2 Lug Triax (m)
adapter
5300 BNC (f)/3 Lug Triax (m)
5299 5298 5090 5300 adapter
6716
Material: Banana Plug/Jack: brass; Spring: heat treated *Std. Colors: -0 Black, -2 Red, -9 White.
1.13in x-hole ø .125in beryllium copper; finish: nickel plating.
(28.70mm) (3.175mm) Model# 4914
Rating: For CE compliance and for personal safety, do
not hold in hand when voltages exceed 33 Vrms/70 Vdc.
Maximum voltage for hands free use: 5000 Vdc. Do not Set screws 8-32 x 0.210in (5.33mm), 100/pk.
use on circuits where transient stresses can exceed the
rated voltage. 15A, +122˚F (+50˚C) (Model 4898, +302˚F
(+150˚C) max.). Model# 1330-*
Double Banana
Plug, Stackable, Similar to MDP without cable loop.
Model# MDP-ST Solderless Features recess for mounting small
Double Banana Plug components with set screws.
with Solder Turret Similar to MDP above except with bright tin Model 1330 has setscrews like MDP.
Terminals plated solder turrets. Accepts cables to 1.55in
0.215in (5.46mm) dia. max. (39.37mm) Material: Banana Plug/Jack: brass; Spring: heat
treated beryllium copper; Finish: nickel plating;
Material: Banana Plug/Jack: brass; Spring: heat Insulation: ABS.
treated beryllium copper; Finish: nickel plating;
1.55in Insulation: polypropylene. 1.13in 0.75in Rating: For CE compliance and for personal
(39.37mm) (28.70mm) (19.05mm) safety, do not hold in hand when voltages
Rating: For CE compliance and for personal exceed 33 Vrms/70 Vdc. Maximum voltage
safety, do not hold in hand when voltages
for hands free use: 5000 Vdc. Do not use on
exceed 33 Vrms/70 Vdc. Maximum voltage
1.13in 0.75in circuits where transient stresses can exceed the
for hands free use: 5000 Vdc. Do not use on rated voltage.15A, +122˚F (+50˚C) max.
(28.70mm) (19.05mm) circuits where transient stresses can exceed the
rated voltage. 15A, +131˚F (+55˚C) max. *Std. Colors: -0 Black, -2 Red.
Color: Black
Model# 4914
Model# 4914
Set screws 8-32 x 0.210in (5.33mm), 100/pk.
Set screws 8-32 x 0.210in (5.33mm), 100/pk
Model# MDP-X
Model# 1330-ST-*
Isolated Double
Double Banana Plug BananaPlug with Four Use to make your own attenuator, balun or filter.
with Solder Turret Similar to Model 1330 above, but features bright SolderTerminals Jacks are isolated from plugs.
Terminals tin plated solder turrets.
Material: Banana Plug/Jack: brass; Spring: heat
Material: Banana Plug/Jack: brass; Spring: heat 2.13in
(54.10mm) treated beryllium, bopper; Finish: nickel plating;
treated beryllium copper; Finish: nickel plating; Insulation: polypropylene; Solder turrets; bright
1.55in Insulation: polypropylene. tin plated.
(39.37mm) 0.75in 0.75in
Rating: For CE compliance and for personal
safety, do not hold in hand when voltages
(19.05mm) (19.05mm) Rating: For CE compliance and for personal
safety, do not hold in hand when voltages
exceed 33 Vrms/70 Vdc. Maximum voltage exceed 33 Vrms/70 Vdc. Maximum voltage
1.13in 0.75in for hands free use: 5000 Vdc. Do not use on for hands free use: 2500 Vdc. Do not use on
(28.70mm) (19.05mm) circuits where transient stresses can exceed the circuits where transient stresses can exceed
rated voltage. 15A, +122˚F (+50˚C) max. 1.13in 0.5in (12.7mm)
the rated voltage. 15A, +131˚F (+55˚C) max.
(28.70mm)
*Std. Colors: -0 Black, -2 Red. Color: Red.
Model#
Do-It-Yourself In-Line Sheathed Safety-rated plugs and jacks for use with any wire from 22 to 18 AWG with flexible insulation. 6383-*
(4mm) Banana Plug and Jack Attaches to wire by crimp or soldering.
Plug
6383-02
1.44in 31
(36.58mm) Plugs fit most sheathed DMM jacks and DMM test leads to make up your own banana plug 6384-*
or jack test lead or jumper. Jack
3.01in (76.45mm) 6384-02
See mating panel jacks (6387 on page 33).
Material: Banana Plug/Jack: brass; Spring: heat treated beryllium copper; Insulation: Santoprene®.
6383 Rating: CAT II 300V, 15A, +275°F (+135°C) max.
*Std. Colors: -0 Black, -2 Red, -02 Black and Red (2 per pkg).
*Sold in pkgs of 10.
6384
72930
Model# Accepts wire Type Mates with...
Insulated Banana AWG
Plug and Jack 5169-* 22, 20, 18 Jack 5167 Model# 5931-*
with Flexible Boot, Plug Panel Mount IEC61010
5170-* 16, 14 Jack 5168 4 mm (0.16in) Banana Accepts flexible test lead sets 5907A, 5908A,
Solder or Crimp 5167-* 22, 20, 18 Plug 5169 5909A available on page 68.
Jack Jack for Sheathed Plugs
5168-* 16, 14 Plug 5170 Max. Panel Thickness: 0.28in (7.0mm).
Ideal for making patch cords or field repairs. Insulation: Nylon.
Snap-on flexible PVC boot allows wire to be 0.57in Rating: 1000 V Cat III per IEC61010-031
crimped or soldered to banana plug or jack. (14.5mm) and IEC61010-1, 25A.
Fits standard 0.166in (4.22mm) dia. banana jack. *Std. Colors: -0 Black, -2 Red, -6 Blue,
Material: Boot: Banana Plug Body: brass; -9 White.
1.04in (26.4mm)
Spring: beryllium copper; Finish: nickel plating; Sold in pkgs. of 10 per color.
5169/5170 Boots Jack: nickel plated brass.
Rating: For CE compliance and for personal
safety, do not hold in hand when voltages exceed
33 Vrms/70 Vdc. Maximum voltage for hands
free use: 5000 Vdc. Do not use on circuits where
transient stresses can exceed the rated voltage.
5167/5168 Jacks
15A, +122˚F (+50˚C,) max.
*Std. Colors: -0 Black, -2 Red. Panel Cut-Out
Panel Cut-Out
0.75in 0.75in
(19.6mm) (19mm)
Model# 2944-*
Model# 4653-0 Do-It-Yourself
Miniature Solderless Miniature Banana Fits miniature 0.104in (2.64mm) dia. banana jacks.
TypeTriple Banana Use for balanced line 2 conductor shielded
Plug, Stackable, Wire firmly held in place with internal set screw.
Plug with Wire Guide cable assemblies.
Solderless Material: Banana Plug/Jack: brass; Spring: beryllium
Material: Banana Plug/Jack: brass; Spring:
0.50in (12.7mm)typical copper; Finish: gold plating; Insulation: ABS.
beryllium copper; Finish: gold plating;
Insulation: ABS. 0.31in Rating: For CE compliance and for personal safety, do
(2.87mm) not hold in hand when voltages exceed 33 Vrms/70 Vdc.
Rating: For CE compliance and for personal
1.11in Maximum voltage for hands free use: 2500 Vdc. Do not
safety, do not hold in hand when voltages
1.26in (28.19mm) use on circuits where transient stresses can exceed the
exceed 33 Vrms/70 Vdc. Maximum voltage
(32.00mm) rated voltage. 5A, +122˚F (+50˚C) max.
for hands free use: 2500 Vdc. Do not use on
circuits where transient stresses can exceed *Std. Colors: -0 Black, -2 Red.
the rated voltage. 5A, +122˚F (+50˚C) max.
Cable strain relief I.D. 0.19in (4.82mm). Model# 2945-*
Setscrews secure wires.
Do-It-Yourself
1.11in
(28.19mm) Miniature Banana Fits miniature 0.104in (2.64mm) dia. banana jacks.
Plug with Safety Wire firmly held in place with internal set screw.
Shield, Stackable, Material: Banana Plug/Jack: brass; Spring: beryllium
Model# Qty. Finish Wrench Nut Thickness Thread Solderless copper; Finish: gold plating; Insulation: ABS
Replacement Size 1.11in Rating: For CE compliance and for personal safety, do
Hex Nuts 6549 500 Nickel 3/16in 0.65in (16.51mm) 4-40 (28.19mm) not hold in hand when voltages exceed 33 Vrms/70 Vdc.
0.31in Maximum voltage for hands free use: 2500 Vdc. Do not
6547 500 Nickel 1/4in 0.95in (24.13mm) 6-32 (2.87mm) use on circuits where transient stresses can exceed the
6440 500 Nickel 1/4in 0.95in (24.13mm) 8-32 rated voltage. 5A, +122˚F (+50˚C) max.
6548 100 Gold 3/8in 0.95in (24.13mm) 10-32 0.086in *Std. Colors: -0 Black, -2 Red.
(2.18mm) I.D.
6441 500 Nickel 3/8in 0.95in (24.13mm) 1/4-32
6389 100 Nickel 9/16in 0.95in (24.13mm) 1/2-28 Model# 2035-*
Miniature Double
Banana Plug with Plugs fit miniature 0.104in (2.64mm) dia.
Hex Nut 6549 6547 6440 6548 6441 6389 Shorting Bar banana jacks.
Fits on 3276 3263 2142 3770 5018 1581 4921 Banana plugs internally shorted with 18 AWG wire.
4513 4511 2143 4022 2269 6387 0.50in Material: Banana Plug/Jack: brass; Spring: beryllium
6271 2382 4098 2854 (12.7mm)
copper; Finish: gold plating; Insulation: ABS.
2383 4243 3267
2439 4512 4005 Rating: For CE compliance and for personal safety, do
0.75in
2440 4543 4069 (19.05mm) not hold in hand when voltages exceed 33 Vrms/70 Vdc.
3264 4773 4601 Maximum voltage for hands free use: 2500 Vdc. Do not
3542 6272 4900 use on circuits where transient stresses can exceed the
3750 5233 rated voltage. 5A, +122˚F (+50˚C) max.
3760 6270 1.10in *Std. Colors: -0 Black, -2 Red.
(25.40mm)
Panel Cut-Out
Panel Cut-Out
Model# 4773-*
Insulated Pin Jack with
Do-It-Yourself .080in
Model# Accepts Wire AWG Wire Wrap Terminal Accepts 0.080in (2.03mm) dia. pin.
5173-* 22, 20,18 Max. panel thickness 0.25in (6.35mm).
(20.32mm) Dia. Pin Tip 0.74in 0.45in
(18.80mm) (11.43mm)
Plug with Flexible Boot, Ideal for making patch cords or field repairs. Material: Jack: nickel-plated brass; Spring:
gold-plated beryllium copper; Terminal:
Solder or Crimp Snap-on flexible PVC boot allows wire to
gold-plated phosphor bronze; Insulation:
be crimped or soldered to pin tip plug. 0.31in
(7.87mm) polycarbonate.
Material: nickel-plated brass.
Rating: For CE compliance and for personal
Accepts 18-22 AWG wire. safety, do not hold in hand when voltages
1.33in
Rating: For CE compliance and for personal (33.78mm) exceed 33 Vrms/70 Vdc. Maximum voltage
1.50in 0.35in
(8.89mm) safety, do not hold in hand when voltages for hands free use: 1500 Vdc. Do not use on
(38.10mm)
exceed 33 Vrms/70 Vdc. Maximum voltage 0.250in (6.35mm) circuits where transient stresses can exceed
for hands free use: 3000 Vdc. Do not use on the rated voltage. 3A, +239˚F (+115˚C) max.
circuits where transient stresses can exceed *Std. Colors: -0 Black, -2 Red, -6 Blue,
the rated voltage. 5A, +122˚F (+50˚C) max. 0.234in -9 White.
(59.44mm)
*Std. Colors: Available in 10 colors.
Panel Cut-Out
Model# 2952
Double Banana Jack Miniature Banana
Model# 2477-*
to Miniature Double Converts standard banana plugs to min-
Jack to Banana Plug Converts miniature banana plugs to
Banana Plug Plug iature.
standard.
Material: Jack: nickel-plated brass; Spring:
nickel-plated beryllium copper; Insulation: Material: Jack: nickel-plated brass; Spring:
x-hole 0.166in (4.22mm) nickel-plated beryllium copper; Insulation:
ABS.
ABS.
Rating: For CE compliance and for personal 0.44in
0.75in 0.50in safety, do not hold in hand when voltages Rating: For CE compliance and for personal
(11.18mm) safety, do not hold in hand when voltages
(19.05mm) (12.70mm) exceed 33 Vrms/70 Vdc. Maximum voltage
exceed 33 Vrms/70 Vdc. Maximum voltage
for hands free use: 2500 Vdc. Do not use on 1.55in (39.37mm)
circuits where transient stresses can exceed for hands free use: 2500 Vdc. Do not use on
the rated voltage. 5A, +122˚F (+50˚ C) max. circuits where transient stresses can exceed
1.25in the rated voltage. 5A, +122˚F (+50˚C) max.
1.13in Color: Black.
(28.70mm) (31.75mm) *Std. Color: -0 Black, -2 Red.
Sold in pkgs. of 10.
An ideal test adapter for rapid testing of the Material: Banana Jack: nickel-plated brass;
hard-to-get at contacts of multi-pin/socket Socket: gold-plated copper; Pin: gold-plated
connectors. Flexible tip allows testing of brass; Insulation: PVC.
adjacent contacts. Flexibility and full insula- Rating: For CE compliance and for personal
tion protects against shorting or contact safety, do not hold in hand when voltages
damage. Model 4690 also fits 0.025in exceed 33 Vrms/70 Vdc. Maximum voltage
(0.63mm) sq. pins.
for hands free use: 2500 Vdc. Do not use on
circuits where transient stresses can exceed
the rated voltage. +122˚F (+50˚C) max.
*Std. Colors: -0 Black, -2 Red.
Wire Specifications
Wire AWG Description O.D. Jacket Temperature Range Color How To Order
Designation
B 18 65/36 copper 0.144in (3.66mm) PVC -4 to 221°F (-20 to +105°C) 10 Colors Test Lead Length
Silicone 18 65/36 copper 0.144in (3.66mm) Silicone -58 to 302°F (-50 to +150°C) Black and Red
Typical Pomona Part Number: 3781-24-2
P 20 41/35 copper 0.087in (2.20mm) PVC -4 to 221°F (-20 to +105°C) 10 colors
Lead Length in Inches
PTO 22 26/36 copper 0.064in (1.62mm) PVC -4 to 221°F (-20 to +105°C) 10 colors (Measured Inside Connectors)
12 7 x 38/36 copper 0.144in (3.66mm) PVC 140°F (+60°C) Black, Red, Green Specify Color
Silicone insulated 1ft (0.3m) leads fit on the end of Fits Digital Multi-meters and other
modular test leads such as Pomona 5907A. instruments with shrouded jacks.
Std. Colors: -0 Black, -2 Red. Offset design designates hot and
ground leads.
Black and red banana plug shrouds.
Molded strain relief for long life.
MIL spec coaxial cable.
Overvoltage CAT II, 600V, 5A per
IEC61010-2-031.
2.53in
(64.28mm)
Model# Length
Multi-Stacking Double
5422-C-60 60in (1.5m) Model# 5523
Banana Plug to Minigrabber® Test
Minipincer® Test Clips Rating: For CE compliance and Clip Patch Cord Kit Kit contains 10 pcs. of Model 3781-
for personal safety, do not hold 24, one of each color.
1.55in in hand when voltages exceed
(39.37mm) 33 Vrms/70 Vdc. Maximum voltage
Model# Length
for hands free use: 300 Vrms. Do One End Only
not use on circuits where transient 3780-60-* 60in (1.5m)
stresses can exceed the rated voltage.
+122˚F (+50˚C) max. *Std. Colors: -0 Black, -2 Red.
0.75in See chart on page 6 for additional
(19.05mm) cable specifications.
1.50in 2.59in
(38.10mm) 8.0in (65.79mm)
(203.2mm)
Model# Length
Low Thermal EMF Model# Length
1693-36-* 36in (0.9m) MicroGrabber® Test
Spade Lug Patch Cord 4613-12-* 12in (0.3m)
1693-60-* 60in (1.5m) Clip Patch Cord
1.41in 4613-24-* 24in (0.6m)
(35.84mm)
Cable: 12 AWG Wire, 0.144in (3.56mm) O.D. 1.71in
4613-36-* 36in (0.9m)
Material: Spade Lug: gold-plated Electrolytic (43.43mm) 4613-48-* 48in (1.2m)
Tough Pitch (ETP) 110 Copper Alloy,
1/2 hard. Hook attaches to components up to
0.26in 0.040in (1.02mm) O.D.
(6.60mm) Rating: For CE compliance and for personal
safety, do not hold in hand when voltages 20 AWG Wire, 0.087in (2.21mm) O.D.
exceed 33 Vrms/70 Vdc. Maximum voltage Rating: For CE compliance and for per-
for hands free use: 2000 Vdc. Do not use on sonal safety, do not hold in hand when volt-
circuits where transient stresses can exceed ages exceed 33 Vrms/70 Vdc. Maximum
the rated voltage. 20A, +131˚F (+55˚C) max. voltage for hands free use: 150V. Do
0.50in *Std. Colors: -0 Black, -2 Red. not use on circuits where transient stresses
(12.70mm)
can exceed the rated voltage. 3A, +216˚F
(+102˚C) max.
*Std. Colors: -0 Black, -2 Red.
Model# Length
Low Thermal EMF Model# 5525
5291A-12-* 12in (0.3m)
Retractable Sheath MicroGrabber® Test
5291A-36-* 36in (0.9m)
Banana Plug Patch Clip Patch Cord Kit Kit contains 10 pcs. of Model 4613-24, one
5291A-60-* 60in (1.5m) each of ten colors.
Cord
Cable: 12 AWG Wire, 0.144in (3.56mm) O.D.
2.72in Model# Length
(69.09mm) Material: Plug Body: gold-plated tellurium Multi-Stacking Banana
1166-12-* 12in (0.3m)
copper; Spring: gold-plated Beryllium Copper. Plug to Alligator
1166-24-* 24in (0.6m)
Rating: 1000V per IEC61010-2-031, 7A, Test Clip
+131˚F (+55˚C). 1166-36-* 36in (0.9m)
*Std. Colors: -0 Black, -2 Red. 2.30in (58.42mm) 1166-48-* 48in (1.2m)
1166-60-* 60in (1.5m)
Model# Length
Model# Length Miniature Stacking
0.025in (0.64mm) Banana Plug Patch Cord
1081-4-* 4in (0.1m)
4772-24-* 24in (0.6m)
Square Pin Jack to 0.89in
1081-8-* 8in (0.2m)
0.080in (2.03mm) Cable: 22 AWG Wire, 0.064in (22.61mm) 1081-12-* 12in (0.3m)
Pin Tip Plug (1.63mm) O.D. 1081-18-* 18in (0.5m)
0.65in (16.51mm) Rating: For CE compliance and for personal 1081-24-* 24in (0.6m)
safety, do not hold in hand when voltages 1081-36-* 36in (0.9m)
exceed 33 Vrms/60 Vdc. Maximum voltage for
hands free use: 45 Vac/60 Vdc. Do not use on 1081-48-* 48in (1.2m)
circuits where transient stresses can exceed 1081-60-* 60in (1.5m)
0.48in the rated voltage. 3A, +122˚F (+50˚C) max.
(12.19mm) *Std. Colors: -0 Black, -2 Red. Cable: 20 AWG Wire, 0.087in
(2.21mm) O.D.
0.52in Rating: For CE compliance and for
(13.21mm) personal safety, do not hold in hand
when voltages exceed 33 Vrms/70 Vdc.
Maximum voltage for hands free use:
3000 Vdc. Do not use on circuits where
transient stresses can exceed the rated
0.52in (13.21mm)
voltage. 5A, +131˚F (+55˚C) max.
Connector: A Connector: B
Miniature Size Die Cast Aluminum Box with Cover
Model# Finish Type Length Type Length
3754 None – – – –
3753 BBE – – – –
3751 BBE BNC (F) 0.72in (18.29mm) BNC (F) 0.72in (18.29mm)
3752 BBE BNC (F) 0.72in (18.29mm) BNC (M) 0.85in (21.59mm)
4742 Replacement cover
4864 Cover screws, 100/pkg
2352 Connector screws with solder turret,100/pkg
BBE = Blue Baked Enamel Cover and screws included with all boxes.
3753/3754 3752
0.08in (2.03mm)
1.13in
(28.70mm) A B
0.08in
(2.03mm)
C C
2401 2393
1.13in
(28.70mm) A B
www.pomonaelectronics.com
Boxes and Enclosures
0.08in
(2.03mm)
C C
1.38in
(35.05mm) A B
3231 3239
2411 3232
A B
2420 C D
3234
Connector: A Connector: B
“C” Size Die Cast Aluminum Box with Cover
Model# Finish Type Length Type Length
2906 None – – – –
2901 BBE – – – –
2902 BBE BNC (F) 0.72 (18.29mm) BNC (F) 0.72 (18.29mm)
4248 Replacement cover
2352 Connector screws with solder turret
BBE = Blue Baked Enamel Cover and screws included with all boxes.
2.64in
(67.07mm) A B
2902
www.pomonaelectronics.com
Boxes and Enclosures
Connector: A Connector: B
“D” Size Die Cast Aluminum Box with Cover
Model# Finish Type Length Type Length
3606 None – – – –
50
3601 BBE – – – –
3602 BBE BNC (F) 0.72 (18.29mm) BNC (F) 0.72 (18.29mm)
3603 BBE BNC (F) 0.72 (18.29mm) BNC (M) 0.85 (21.59mm)
4726 Replacement cover
2352 Connector screws with solder turret
BBE = Blue Baked Enamel Cover and screws included with all boxes.
0.09in (2.29mm)
3602 3603
3.00in
(76.20mm) A B
Model# Finish
“E” Size Die Cast
5186 None 2.75in
Aluminum Box 8.87in (225.30mm)
(69.85mm)
4226 Blue Baked Enamel
with Cover
4416 Replacement cover
Connector: A Connector: B
“F” Size Extruded Aluminum Box with Covers
Model# Finish Type Length Type Length
3306 None – – – –
3301 BBE – – – –
3302 BBE BNC (F) 0.72in (18.29mm) BNC (F) 0.72in (18.29mm)
4247 Replacement cover
3328 Flange mounting cover
4862 Cover screws, 100/pkg
2352 Connector screws with solder turret
BBE = Blue Baked Enamel Cover and screws included with all boxes.
2.68in
(68.07mm) A B
www.pomonaelectronics.com
Boxes and Enclosures
Model# Finish
“G” Size Extruded 0.20in (5.08mm)
3316 None
Aluminum Box with
3311 Blue Baked Enamel
Cover 51
4247 Replacement cover
3328 Flange mounting cover 2.68in
4862 Cover screws, 100/pkg (68.07mm)
3311
3742
Connector: A Connector: B to E
“J” Size Die Cast Aluminum Box with Cover
Model# Finish Type Length Type Length
5255 None – – – –
4655 BBE – – – –
4656 BBE BNC (F) 0.72 (18.29mm) BNC (F) 0.72 (18.29mm)
4658 Replacement cover
4864 Cover screws, 100/pkg
BBE = Blue Baked Enamel Cover and screws included with all boxes.
4655/5255
B-E B C D E
1.50in
(38.10mm)
A A
www.pomonaelectronics.com
Boxes and Enclosures
Model# Finish
“L” Size Die Cast
5203 None
Aluminum Box with
4903 Blue Baked Enamel
52 Cover
5198 Replacement cover
3.00in
4864 Cover screws, 100/pkg (76.20mm)
Connector: A Connector: B
Black Phenolic Box with Cover
Model# Finish Type Length Type Length
2105 EGP – – – –
2259 EGP PDB 0.80in (20.32mm) DBP 0.70in (17.78mm)
2098 EGP DBJ – DBP 0.70in (17.78mm)
2096 EGP – – DBP 0.70in (17.78mm)
EGP = Electrical Grade Phenolic Cover and screws included with all boxes.
PDB = Post, Double Binding
DBJ = Double Banana Jack
DBP = Double Banana Plug
2105 2259
A B
1.44in
(36.58mm)
A B
2098 2096
A 1.75in (44.45mm) B 0.69in
(17.53mm) depth
Connector: A Connector: B
Black Phenolic Box with Cover
Model# Finish Type Length Type Length
2103 EGP – – – –
2099 EGP BNC (M) 0.85 (21.59mm) BNC (F) 0.72 (18.29mm)
EGP = Electrical Grade Phenolic Cover and screws included with all boxes.
DBJ = Double Banana Jack
DBP = Double Banana Plug
2103
1.00in
(25.40mm) A B
2099
www.pomonaelectronics.com
Boxes and Enclosures
Connector: A Connector: B
Black Phenolic Box with Cover
Model# Finish Type Length Type Length
2104 EGP – – – –
2224 EGP DBJ – DBP 0.70 (17.78mm)
53
EGP = Electrical Grade Phenolic Cover and screws included with all boxes.
DBJ = Double Banana Jack
DBP = Double Banana Plug
2224 A B
1.53in
(38.86mm)
A B
2104
Model# Finish
Molded Thermoplastic
3850-0 Black - Thermoplastic
Box with Card Guides
3850-6 Blue - Thermoplastic
and Cover 1.81in
4864 Cover screws, 100/pkg
(45.97mm)
Cover and screws included.
Recommended Circuit Board Sizes:
2.51in x 1.60in x .062in,
(63.35mm x 40.64mm x 1.57mm) Thick. 2.69in (68.33mm) 1.37in
(34.80mm) depth
3850-0
Model# Finish
Molded Thermoplastic
4384-0 Black - Thermoplastic
Box with Card Guides
4384-6 Blue - Thermoplastic
and Cover
4864 Cover screws, 100/pkg
3.16in
Cover and screws included. (80.26mm)
Recommended Circuit Board Sizes:
3.93in x 1.58in x 0.062in
(99.82mm x 40.13mm x 1.57mm) Thick.
4384-0
www.pomonaelectronics.com
DMM Accessories and Kits
Connecting with the industry’s leading digital multimeter brands, Pomona
provides the world’s largest selection of test leads and probes. Superior
materials and outstanding design, assure conformity with industry-
leading reliablility and performance standards. From high-den-
sity IC leads to voltage on a distribution panel, Pomona
54
connects you with the right solution.
Model# 5677B
Deluxe Multi-Use DMM Maxi-Kit
1. Silicone insulated 4ft (1.2m) leads with right angle plug.
2. Modular probe set with replaceable tips.
3. 5 sets of replacement tips.
4. Retractable tip test probe set.
5. Test lead coupler set.
6. Medium alligator clip set.
7. Large alligator clip set.
3 8. Spade lugs.
10 11 9. IC probe tip adapter.
10. Minigrabber test clip leads.
®
to test leads.
2
• Test lead coupler connects leads to probe set for
16ft (4.8m) reach.
12 • Nylon storage pouch with compartments for accessories.
4
Model# 6340
Electronic DMM Maxi-Kit
1. Silicone insulated 4ft (1.2m) leads.
2 2. Modular probe set.
3. Precision electronic probes.
4. 4 sets of replacements tips.
11 5. Test lead couplers.
6. Medium alligator clips.
7. Large alligator clips.
5 8. Minigrabber test clip leads.
®
test points.
• Nylon storage pouch with compartments for accessories.
6
7
8 9
www.pomonaelectronics.com
DMM Accessories and Kits
Model# 5674C
Deluxe Electronic DMM Test Lead Kit
1. Silicone insulated 4 ft (1.2m) leads • Modular probes with standard probe
with right-angle plug. tips.
55
2. Modular probe set with standard tips. • Insulated 4ft (1.2m) test leads with
3. Extended probe tip adapters. right-angle DMM plugs fit most meters
4. Medium alligator clips. from Fluke, HP, Meterman, and others.
5. IC probe tip adapters. • Probe tip extender with 3in (76.2mm)
6. Minigrabber test clip leads.
® long tip.
9 7. Minipincer test clip leads.
® • Minigrabber test clip leads attach to
®
test leads.
8. Maxigrabber test clips with pincer tip.
®
leads.
• Nylon storage pouch with compart-
ments for accessories.
3
5 7 8
Model# 5543B
Electronic DMM Test Lead Kit
1. Silicone insulated 4ft (1.2m) test. • Silicone insulated 4ft (1.2m) test
leads with right-angle DMM plugs. leads fit meters from Fluke, HP,
2. Modular electronic test probes with Meterman, and others.
standard tips. • Modular electronic test probes attach
3. Extended fine-tip probe adapter -red. to leads.
4. Medium alligator clip -black. • Extended fine-point adapter attaches
5. IC probe tip adapter -red. to probe tips.
6. Insulated spade lug -black. • IC adapter attaches to probe for
8 7. Minipincer test clip lead -red.
® secure probing on chip leads.
4 8. Minigrabber test clip lead -red.
® • Minipincer test clip lead for fine
®
3
1
5
6
4
3
www.pomonaelectronics.com
DMM Accessories and Kits
56 1. Silicone insulated 4ft (1.2m) test • Silicone insulated 4ft (1.2m) leads
5 2 leads with straight DMM plugs. fit meters from Fluke, HP (Agilent),
2. Modular electronic test probes with Keithley and others.
standard tips. • Modular electronic test probes attach
3 3. Extended fine-tip probe adapters. to leads.
1
4. Medium alligator clips. • Extended fine-point adapters attach
5. IC lead probe tip adapters. to probe tips.
8
6. Insulated spade lugs. • IC adapters attach to probes for
7. Minipincer test clip leads.
® secure probing on chip leads.
8. Minigrabber test clip leads.
® • Minipincer test clip leads for fine
®
Model# 5901B
Electronic Bench DMM Test Lead Kit
1. Silicone insulated 4ft (1.2m) test • DMM plugs fit meters from Fluke,
leads with straight DMM plugs. HP (Agilent), Keithley and others.
2. Modular electronic test probes with • Modular electronic test probes
replaceable tips. with replaceable tips adapt to many
6 3. 5 sets of replacement probe tips different modes.
4. Medium alligator clips. • Replacement probe tips offer a wide
5. Insulated spade lugs. variety of probing solutions.
1 • Alligator clips attach to test lead for
3 6. Minigrabber test clip leads.
®
Mode# 6530A
Deluxe Automotive DMM Test Lead Kit
1. Silicone insulated 4ft (1.2m) test • Alligator clips attach to test lead for
leads with right-angle DMM plugs. reliable connections.
8
2. Heavy-duty modular test probes • Sharp stainless-steel probe tips resist
with stainless-steel tips. wear.
3. Heavy-duty alligator clips. • Insulation piercing clips make
4. Insulation piercing clips. connections without stripping
5 5. Maxigrabber test clips with
® insulation from wires.
alligator jaws. • Backprobe pins access contacts
6. Maxigrabber test clips with hook.
® through the back side of automotive
3 connectors.
7. Backprobe pins.
8. Nylon storage pouch. • DMM plugs fit meters from Fluke,
2 Meterman, Amprobe, Greenlee and
others.
6
• Maxigrabber test clips with alligator
®
7
1
www.pomonaelectronics.com
DMM Accessories and Kits
Model# 5903A
Industrial/Automotive DMM Test Lead Kit
1. Silicone insulated 4ft (1.2m) test • DMM plugs fit meters from Fluke,
5 leads with right-angle DMM plugs. Meterman, Amprobe, Greenlee and
others.
57
6 2. Heavy-duty modular test probes.
3. Heavy-duty alligator clips. • Sharp stainless-steel probe tips resist
4. Insulation piercing clips. wear.
5. Maxigrabber test clips with
® • Alligator clips attach to test lead for
alligator jaws. reliable connections.
6. Nylon storage pouch. • Insulation piercing clips make con-
1 nections without stripping insulation
from wires.
• Maxigrabber test clips with alligator
®
1. Silicone insulated 4ft (1.2m) test • DMM plugs fit meters from Fluke,
leads. Meterman, Amprobe, Greenlee and
2. Modular electrical test probes with others.
6
stainless-steel tips. • Alligator clips attach to the test leads
3. Maxigrabber test clips with jaws.
® for secure connections.
2
4. Maxigrabber test clips with hooks.
® • Maxigrabber test clips attach to test
®
5 1
4 3
Model# 5673B
Electrical DMM Test Lead Kit
1. Silicone insulated 4ft (1.2m) test • DMM plugs fit meters from Fluke,
leads with right-angle DMM plugs. Meterman, Greenlee, Amprobe and
2. Modular electrical test probes with others.
stainless-steel tips. • Spade lugs connect to test leads and
6 can be secured to binding posts or
3 3. Extended tip probe adapters.
4. Insulated spade lugs. terminals.
5. Medium alligator clips. • Alligator clips plug into the test leads.
4 1
6. Large alligator clips.
2 7. Nylon storage pouch.
58 1. Silicone insulated 4ft (1.2m) test • DMM plugs fit meters from Fluke,
4 leads with right-angle DMM plugs. Metermam, Greenlee, Amprobe and
2. Modular electrical test probes with others.
standard tips. • Maxigrabber test clips with jaws
®
3
2
Model# Ratings
Multi-Use DMM Test Lead Kit
5899A CAT III 1000V per IEC61010-2-031
1. Silicone insulated 4ft (1.2m) test • DMM plugs fit meters from Fluke,
leads with right-angle DMM plugs. Meterman, Greenlee, Amprobe and
5 2. Modular electrical test probes with others.
standard tip. • Alligator clips attach to test lead for
3. Maxigrabber with pincer tips.
® reliable connections.
4
4. Medium alligator clips. • Maxigrabber test clips with
®
3
1
Model# 6173A
Deluxe Industrial Test Companion Kit ™
7
1
Model# 6345
Deluxe Electronic Test Companion Kit ™
1
8. SMD Grabber Test Clip Leads.
®
Model# 6172A
Industrial Test Companion™ Kit
Includes shoulder-pack style Cordura carrying
case plus the following IEC61010 compliant test
accessories:
4 1. Modular Electrical Test Probe Set with Banana
Plug Tip.
6 1 2. Flexible Test Lead Set with Right-Angle and
Straight Banana Plugs.
3. Probe Lead Set with Sharp Stainless Steel Tip.
4. Maxigrabber Test Clip Set with Pincer Tip.
®
Model# 6174
Electronic Test Companion™ Kit
Includes shoulder-pack style Cordura carrying case
plus the following test accessories:
1. Modular Electronic Probe
1 10 Set with 0.080in (2.03mm) diameter tip.
6
5 2. Flexible Test Lead Set with Right-Angle and
Straight Banana Plugs.
3. SMD Test Tweezer to Banana Plugs.
®
Model# 72942
Probe and Lead Kit for Portable Scopes
Includes shoulder-pack style Cordura carrying case plus the following test accessories:
60 1. Red Scope Probe, 500 MHz, see page 77.
2. Black Ground Lead.
4 3. Red Sprung Hook.
4. Probe Tip Ground.
1 2 5 5. Modular Test Probe with Standard 0.080in (2mm) Tip.
6. Flexible Test Lead Set with Straight and Right-Angle Banana Plugs.
7. Medium Alligator Clip Set.
3
8. Extra Large Alligator Clip Set.
9. Maxigrabber Set Pincer Style.
®
10
7
6
www.pomonaelectronics.com
DMM Accessories and Kits
Test Companion Kits include your favorite probes, clips, and leads in
their own specially designed carrying case. Select from the following table.
61
Kit Model#
Model# 6112A 6162 6171 6172A 6173A 6174 6175 6237 6345 Page
Test Probes
5689A Probe with Replaceable Tip • • • 63
5906A Probe with 0.16in (4mm) Banana Tip • • • • 63
6232A Probe with 0.080in (2.03mm) Brass Tip • • • 63
Test Leads
5678 SMD Test Tweezers with DMM Plugs • • • 66
5898 Right-Angle Banana/Probe • • 62
5907A Straight/Right-Angle Banana • • • • • • • • 63
5908A Straight/Straight Sheath Banana Plugs 63
Alligator Clips
5916A Medium Alligator Clips (2) • • • • • • • • 65
6041B Large Alligator Clips (2) • • 64
Grabbers
5910B Maxigrabber Set with Pincer Tips (2) • • • 64
5911B Maxigrabber with Hook Tip Set • • 64
5912B Maxigrabber Alligator Clip Set • 64
Patch Cords
6243 SMD Grabber to Banana Plug • • • • —
6244 Minigrabber to Right-Angle Sheathed Banana Plug 42
6248 Minigrabber to Sheathed Banana Jack • • • • • 42
Oscilloscope Probes
4550B Oscilloscope Probe • 75
Probe Tips/Tip Adapters
5133 Probe Tip Stainless Steel, Dog Leg Micro (2) • • • 66
5682 Extended Tip Adapter • • • 65
6262 Extended Tip Adapter • 65
6263 IC Test Tip Adapter • 65
Spade Lug Adapters
6203 Insulated Spade Lug • • • 65
Coaxial Cable Assemblies/Adapters
2249 BNC (M) Cable Assembly • 7
3788 BNC (M) to Minigrabber Adapter • 13
Carrying Cases
5955 Tri-fold Pouch • 61
6146 Briefcase • • 61
6147 Medium Shoulder-pack • • • • • 61
Model# Description
Pomona’s Test
6146 Briefcase style with
Companion Accessory
™
carrying strap
Cases and Pouches 6147 Medium shoulder-pack with
carrying strap
5955 Folding case with Velcro
6146
6147 5955
www.pomonaelectronics.com
DMM Accessories and Kits
Plug Types
1. Right-angle DMM plug*
2. Straight DMM plug*
3. Stacking banana plug
4. Straight banana plug
5. Retractable sleeve banana plug
6. Right-angle banana plug
* Shrouded DMM plugs fit most DMMs
from Fluke, Meterman, HP (Agilent), 2
Amprobe, Greenlee and others. 1 3 4 5 6
www.pomonaelectronics.com
DMM Accessories and Kits
Plugs into • Leads for Pomona Modular Test Probes. Plug Types
probes below • Plugs fit most popular DMMs from 1. Right-angle DMM.
Fluke, Meterman, HP (Agilent), Amprobe, 2. Straight DMM.
Greenlee and others. 3. Retractable sheath 0.16in (4mm).
• Silicone insulated 4ft (1.2m) leads.
• Retractable sleeve plug fits all banana
jacks, binding posts and DMM input jacks.
1 2 3
5689A
6479
5906A 5689A
www.pomonaelectronics.com
DMM Accessories and Kits
Model# 5914
Industrial Alligator
Clip Set Fits on any DMM or banana plug
test lead.
Rating: IEC61010-2-031 CAT III
600V 10A.
Model# 5913 Jaw Opening: to 1.0in (25.40mm).
Insulation Piercing
Maxigrabber Test Clip Set
®
Includes set of 2, one red and one *Std. Colors: -0 Black, -2 Red.
black.
Pierces insulation to make 3.20in (81.3mm)
connection on wire up to 0.144in
(3.66mm) diameter.
Rating: Overvoltage per
IEC61010-2-031 CAT III, 1000V,
5A.
www.pomonaelectronics.com
DMM Accessories and Kits
4.40in (111.76mm)
0.1in (2.54mm)
www.pomonaelectronics.com
DMM Accessories and Kits
Create Your Own Test Leads for Your Own Kelvin Probes
Model# 6303
Specific Needs with the Following: For 4-wire and 2-wire measure-
ments.
67
Model# Insulation Length Patented design for high precision
Test Lead Wire with Type rapid testing.
Silicone or PVC 6733-* Silicone 50ft (15.2m) Gold-plated for accuracy.
Insulation 6734-* PVC 50ft (15.2m) Easily move from one test point to
another for rapid readings.
• 50ft (15.2m) of unterminated 18 AWG For use with 4-wire Kelvin meters
test lead wire 50ft (15.2m lengths only.) such as Agilent 34401A, and 3458A.
• Choose from heat-resistant silicone or
Rating: For CE compliance and for
PVC insulation.
personal safety, do not hold in hand
• Very flexible with 65 strands of 36 AWG when voltages exceed 33 Vrms/
tinned copper conductor. 70 Vdc.
• Create your own test leads with the
adapters shown below. Length: 48in (122cm)
• Wide temperature range of -58 to 302°F
(-50 to 150°C) with PVC insulation. Model# 6730
Kelvin Lead Set with
*Std. Colors: -0 Black, -2 Red.
Kelvin Clips • Gold-plated Kelvin clip jaws
See pages 30-31 for more do-it-yourself allow 4-wire resistive measure-
plugs. ments.
• Silicone insulated 3.3ft (1m)
test lead.
Model# 6729 • Safety sheathed straight DMM
Do-It-Yourself 4mm
plugs for convenient bench use.
Right Angle Banana Plug Build your own safety leads with do-it- • Clips firmly grip test points for
yourself safety-sheathed 4mm right-angle
banana plug. low-loss connection.
1.28in Rating: CAT III 1000 V.
(32.4mm) Material: Contacts: nickel-plated brass;
Insulation: lucel acetal polymer.
Rating: IEC61010 1000V Category III**,
20A, 14 to 131°F (-10 to +55°C).
*Std. Colors: -0 Black, -2 Red.
Model# 5940
Model# 6721
Kelvin Clip Set
Do-It-Yourself 4mm Two gold-plated clips connect to
Stackable Banana Plug Build your own safety stacking leads with test points for 4-wire
do-it-yourself safety-sheathed 4mm stack- resistive measurement.
able banana plugs. Clips open to 0.25in (6.35mm)
2.3in (58.4mm) Material: Contacts: nickel-plated brass, maximum.
Insulation: lucel acetal polymer. Gold-plated plugs and clips.
Rating: IEC61010 1000V Category III**, Rating: For CE compliance and
20A, 14 to 131°F (-10 to +55°C). for personal safety, do not hold in
*Std. Colors: -0 Black, -2 Red. hand when voltages exceed
33 Vrms/70 Vdc.
** When plug is correctly assembled and
terminated. Overall Length: 26.5in (67.3cm).
Model #
Do-It-Yourself In-Line Sheathed (4mm) Banana Plug and Jack • Safety-rated plugs and
jacks for use with any wire 6383-*
from 22 to 18 AWG with Plug
6383-02
flexible insulation.
1.44in 6384-*
• Plugs fit most sheathed Jack
(36.58mm) DMM jacks and DMM test 6384-02
3.01in (76.45mm) leads to make up your
own banana plug or jack
test lead or jumper. Attaches to wire by crimp or
soldering.
See mating panel jacks
(6387 on page 33). Rating: IEC61010 CAT II
6383 300V, 15A, +275°F (+135°C)
Material: Banana Plug/Jack: max.
brass; Spring: heat treated
beryllium copper; Insulation: *Std. Colors: -0 Black,
Santoprene .
® -2 Red, -02 Black and Red
(2 per pkg).
*Sold in pkgs of 10.
6384
*see rating message at start of section. *Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow, www.pomonaelectronics.com
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
Grabbers and Test Clips
Pomona Electronics’ Grabber Test Clips connect rapidly to
®
0.06in (1.52mm)
Model# 4723-*
0.016in - 0.02in Minigrabber Test Clip ®
(0.4mm - 0.5mm) Minipincer Minigrabber with Banana Jack Banana Jack built into plunger.
SMD Grabber Page 68
0.14in (3.56mm) Overall Length: 2.54in (64.52mm).
Page 69
Rating: Maximum voltage for hands free use:
0.14in (3.56mm) 300V. 5A, 216˚F (+102˚C) max.
0.04in
0.14in (1.02mm)
(3.56mm) Rotating *Std Colors: -0 Black, -2 Red.
Micrograbber
Page 68 Micrograbber
0.06in (1.52mm) Page 69
SMD (1.52mm)
0.06in
0.087in
0.06in (2.21mm)
(1.52mm)
Model# Max. Wire Dia. Temperature
Do-It-Yourself
0.016in - 0.02in 3925-* 0.090in 216°F
(0.4mm - 0.5mm) Minigrabber Test Clips ®
(2.29mm) (102°C)
0.016in - 0.02in 4555-* 0.144in 300°F
0.016in - 0.5mm)
(0.4mm 0.02in (3.55mm) (149°C)
(0.4mm(2.29mm)
0.09in - 0.5mm) Page 74
Micro
0.04in (1.02mm) Overall Length: 2.54in (64.52).
1.71in (43.43mm) Rating: Maximum voltage for hands free use:
0.04in (1.02mm) 300V. 5A, 302˚F (+150˚C) max.*
0.04in (1.02mm) Std Colors: -0 Black, -2 Red.
0.09in (2.29mm)
0.087in (2.21mm) Model# Features
Page 69 4176-02 Kit contains 2 pcs. of 3925,
0.14in (3.56mm)
0.087in (2.21mm)0.12in (3.05mm)
0.087in (2.21mm) one black/one red
Micro
1.71in (43.43mm) 5522 Kit contains 10 pcs. of 3925,
one of each color
0.09in (2.29mm)
0.14in (3.56mm)
0.06in (1.52mm)
0.09in (2.29mm)
0.09in (2.29mm) 0.10in (2.54mm)
Page 69 Model# 4826-*
Minigrabber Test Clip ®
www.pomonaelectronics.com
0.06in (1.52mm) Ratings: The components in this section have a hands free rating for use in controlled voltage environments.
However, for CE compliance these products are not intended for hand held use at voltages above 33 Vrms/70 Vdc.
0.10in (2.54mm)
Grabbers and Test Clips
Model# 5418-*
Do-It-Yourself
Minipincer Test Clip
®
Pincer type contact.
Overall Length: 2.59in (65.79mm).
Rating: Maximum voltage for hands
free use: 300V. 5A, 176˚F (+80˚C)
max.
*Std Colors: -0 Black, -2 Red
For pincer dimensions see page 68.
Ratings: The components in this section have a hands free rating for use in controlled voltage environments. www.pomonaelectronics.com
However, for CE compliance these products are not intended for hand held use at voltages above 33 Vrms/70 Vdc.
Grabbers and Test Clips
www.pomonaelectronics.com *see rating message at start of section. *Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
SMD / Micro Format Test
Components and circuit boards are getting smaller and smaller. Pomona
makes your job easier by providing clips and leads designed for micro-test,
including a variety of 2mm connectors for use in tight spaces. From
clips designed for chip pitches down to 0.008” (0.2 mm),
to patch cords, and even complete SMD test kits, 71
Pomona has the connection you need.
Model# 72928
SMD Multi-Use Test Kit
SMD test kit designed for multiple small format test applications.
Kit includes:
1. 72902-0 Micro SMD Grabber Test Clips, (Black)
2. 72902-2 Micro SMD Grabber Test Clips, (Red)
3. 72906-0 Mini SMD Grabber Test Clips, (Black)
4. 72906-2 Mini SMD Grabber Test Clips, (Red)
5. 72905-0 Clip lead for Micro SMD Grabber - 0.8mm female/4 mm female, (Black)
6. 72905-2 Clip lead for Micro SMD Grabber - 0.8mm female/4 mm female, (Red)
7. 5908A Bench-top DMM Modular Test leads
8. 72920-39-0 Multi-stacking 2mm safety sheathed patch cords, PVC, 100mm (39in), (Black)
9. 72920-39-2 Multi-stacking 2mm safety sheathed patch cords, PVC, 100mm (39in), (Red)
10. 72923-0 SMD test probe with sharp, spring mounted tip, 2mm jack, (Black)
11. 72923-2 SMD test probe with sharp, spring mounted tip, 2mm jack, (Red)
12. 72917-0 4mm banana plug to 2mm sheathed banana jack adapter, (Black)
13. 72917-2 4mm banana plug to 2mm sheathed banana jack adapter, (Red)
14. 72924-0 Mini-alligator clip with 2mm jack, (Black)
15. 72924-2 Mini-alligator clip with 2mm jack, (Red)
Large Folding Test Kit Pouch
Model# 72935
SMD High Density Circuit Test Kit
SMD test kit designed for probing high
density circuits.
Kit includes: 2 DMM leads with 4mm
plugs, 2 test probes with spring-loaded tips,
6 micro SMD grabbers (72902), 6 adapter
leads 0.8mm female to 0.4mm jack, 2 mini
SMD grabbers with 4mm connectors,
2 holding rods (72903).
www.pomonaelectronics.com
SMD / Micro Format Test
Model# Color
Clip lead for Micro SMD
72905-0 Black
Grabber 0.8mm/4mm
72905-2 Red
Model# Color
Mini SMD Grabber
72907-20-0 Black
Test Clip with
72907-20-2 Red
Lead and
2mm Jack Mini SMD Grabber Test Clip (Pomona
72906) with 20 inch (50cm) lead and 2mm
Jack.
www.pomonaelectronics.com
SMD / Micro Format Test
Multi-stacking 2mm safety sheathed male/ 2mm safety sheathed male/male patch
male patch cords, PVC. cords, PVC.
Rating: 600V Cat II, 10A Max.
www.pomonaelectronics.com
SMD / Micro Format Test
Model# Color
4mm Banana Jack to
72916-0 Black
2mm Banana Jack Model# Features
72916-2 Red
Adapter Rotating Micrograbber ®
10/pkg. Clip for 0.05 to 0.02in • Use with PQFP & SOIC packages
Rating: 33 Vac / 70 Vdc, 10A. (1.25 to 0.5 mm) with 0.02in (0.5mm) lead pitch or
greater.
Lead Pitch
• Pincers and 0.03in (0.76mm) pin
plug are directly connected; no
sliding parts.
• Pincers are stationary. Housing
Model# Color moves to close tips together.
2mm Safety Sheathed
72921-0 Black • Device under test must be inactive
Jacks when connecting pincers.
72921-2 Red
Rating: For CE compliance and
2mm safety sheathed jack with 1.9mm wire personal safety, do not hold in hand
wrap connecting pin. when voltages exceed 33 Vrms/70 Vdc.
Materials: Contacts: Nickel plated brass. Maximum voltage for hands free use:
Insulation: Polyamide. 70 Vrms Max.
Rating: 600V Cat II, 10A. *Std Colors: -0 Black, -2 Red.
Model# Color
2mm Safety Sheathed
72922-0 Black
Jack with Solder Tab
72922-2 Red
www.pomonaelectronics.com
Oscilloscope Probes and
Accessories
Pomona’s oscilloscope probes give you the full range you need.
Designed, rated, and specified to match the bandwidth of your
instrument, they provide you with full voltage read-out
over the entire rated bandwidth of each probe. 75
Replacement Passive
Oscilloscope Probes
These general purpose monolithic passive
voltage probes feature high performance for
greater test flexibility. Complete accessory
kit included.
See selection guide below.
Replacement Accessory Oscilloscope Probe Tip Adapter Model# 6443 Pomona adapters with
Kit: 6267 0.025in (0.635mm) pins
Kit includes: 5360 6353 All “IC”
Retractable Hook Tip 5790 6490 test clips
BNC Adapter
IC Adapter 6351 6442
Insulating Tip 6352
Trimmer Tool
6in (0.15m) Ground Lead
with Alligator Clip
This adapter provides an easy, fast, and reliable way to connect your oscilloscope probe to IC test adapters,
test clips and grabbers using 0.025in (0.635mm) connection pins.
1 Rating: All probes are rated 300V (DC + Peak AC), CAT I, per IEC61010-2-031. Maximum 3 Dependent upon oscilloscope input characteristics.
voltage allowed on the LO connection including shell and housing must not exceed 30V. 4 Any oscilloscope that uses the Tektronix style range actuator.
®
2 Maximum input voltages are dependent on the oscilloscope input characteristics; take the 5 For oscilloscopes with 1 MΩ input resistance.
lesser of the two specifications.
www.pomonaelectronics.com
Oscilloscope Probes and Accessories
Model# Probe Maximum Input System Bandwidth System Risetime Probe Input Probe Input Compensation Readout Cable Length
Ratio Voltage CAT II MHz (-3dB)
1
(ns) Resistance (MΩ) Capacitance (pF) Range (pF) Actuator 2
Replacement Accessory Oscilloscope Probe Tip Adapter Model# 6553 Pomona adapters with
Kit: 73040 0.025in (0.635mm) pins
Kit includes: 5360 6353 All “IC”
Retractable Hook Tip 5790 6490 test clips
BNC Adapter
Insulating Tip 6351 6442
Trimmer Tool 6352
8.7in (22cm) Ground Lead
with Alligator Clip
1 ea. Rigid Probe Tip
1 ea. Spring Probe Tip
This adapter provides an easy, fast, and reliable way to connect your oscilloscope probe to IC test adapters,
test clips and grabbers using 0.025in (0.635mm) connection pins.
1 Rating: Per IEC61010-2-031. Maximum votage allowed on the LO connection including shell and housing must not exceed 30V.
2 Any oscilloscope that uses the Tektronix style range actuator
®
www.pomonaelectronics.com
Oscilloscope Probes and Accessories
Microline Passive Oscilloscope Probes 500 MHz X10 Passive Voltage Pomona adapters with Replacement Accessory
Probe 4ft (1.2m) cable, 500V 0.025in (0.635mm) pins Kit: 73040
peak.
77 The perfect solution for
5360 6352 6442 Kit includes: 77
5790 6353 All “IC” test clips Retractable Hook Tip
accessing hard-to-reach test
BNC Adapter
points, particularly fine pitch 6351 6490 Insulating Tip
IC leads. The Microline Probe
Trimmer Tool
features a 500 MHz X10 pas-
8.7in (22cm) Ground Lead
sive voltage probe compactly
with Alligator Clip
designed for on-the-go field
1 ea. Rigid Probe Tip
service or in the lab.
1 ea. Spring Probe Tip
Model# Probe Maximum Input System Bandwidth System Probe Input Probe Input Compensation Readout Cable Length
Ratio Voltage CAT I MHz (-3 dB)
1
Risetime (ns) Resistance (M W) Capacitance (pF) Range (pF) Actuator 2
6551 10: 1 300 V 500 < 0.70 10 < 11 7 - 25 Yes 4ft (1.2m)
6554 10: 1 300 V 500 < 0.70 10 < 11 7 - 25 No 4ft (1.2m)
1 Rating: Per IEC61010-2-031. Maximum votage allowed on the LO connection including shell and housing must not exceed 30V.
2 Any oscilloscope that uses the Tektronix style range actuator
®
Features
• With a CAT II, 600 V (CAT III, 300 V) rating, these
probes are perfect for use with portable oscillo-
scopes.
• And with a 500 MHz bandwidth, these probes pro-
vide plenty of headroom for those high frequency
measurements.
• Fully Insulated.
• Meets IEC 61010-031.
• Ergonomic Design with Comfort Grip.
Accessories Included
• Push-On Hook Clip.
• Push-On Reference Contact.
• Reference lead with alligator clip for the connection
to the 0.2 mm safety socket in the handle.
Model# Probe Ratio Maximum Input Bandwidth Input Resistance Input Capacitance Approximate Compensation Cable Length
Voltage CAT II 1
(MHz) (MΩ) (pF) Risetime (ns) Range (pF)
72940-* 10: 1 600 V 500 10 13 1 10 - 30 4ft (1.2m)
72941 (set) 10: 1 600 V 500 10 13 1 10 - 30 4ft (1.2m)
72942 See page 60
1 Derated with frequency.
2 For oscilloscopes with 1MΩ input resistance.
www.pomonaelectronics.com
Oscilloscope Probes and Accessories
Input Characteristics
Active Differential Probe
Input Probe Shrouded banana test probe
Input Cable Length 60in (1.5m)
78
Probe Ratio 20:1 / 200:1
Voltage to Ground 600V CAT III, 1000V CAT II
Maximum Input 1000 Vdc
Maximum Differential 1000 Vrms
Input Voltage 1200V (DC + Peak AC)
Maximum Floating 600V Category III /400 Hz
Voltage / Frequency (from shielding to ground)
Probe Input Resistance 5MΩ (input to shielding), 10MΩ (input to input)
Probe Input 6 pF (input to shielding), 5 pF (input to input)
Capacitance
Operating Temperature +32 to +122°F (0 to +50°C)
Output Characteristics
Output Cable BNC cable
Output Cable Length 20in (0.5mm)
Output Voltage Range ±6.5V (into 1MW)
Accuracy ±2.5%
Pomona Model 6731 differential voltage probe allows users to Included with the 6731:
Bandwidth DC to 20 MHz (-3 dB)
safely make floating high voltage measurements while using gen- Large Jaw Alligator clips
eral purpose oscilloscopes. Using a built-in differential amplifier, Risetime 17.5 ns
(one red and one black).
the floating signal is converted and scaled to a low-voltage signal CMRR 20:1 @ 60Hz =>70dB 200:1 @ 60Hz => 80dB
referenced to earth ground. The probe can be used on circuits Pin-Grabber Test Clips
20:1 @ 1MHz =>40 dB 200:1 @ 1 MHz =>50dB
associated with electronic high-power converters, motor speed (one red and one black).
9V Alkaline Battery. Power
controls, switching mode power supplies, and other high voltage
circuits requiring isolation. 9V Alkaline Battery 8 hours operation. 400 hours in standby. Unit goes into
Optional:
standby mode after 30 minutes (battery mode only).
Features include switchable attenuation, high impedance to ground Model 6732: Universal
for both positive and negative side of the balanced input, and Model 6732 Optional For continuous operation
Power Adapter.
maximum differential voltage up to 1000V. The probe input uses Universal Power
shrouded banana test probe tip. The output to the oscilloscope is Adapter
made with a BNC cable with a safety insulated BNC male connector.
www.pomonaelectronics.com
Audio/Video/Broadcast
Whether setting up your own home theater or looking for connectors
for that next broadcast event, Pomona audio/video/broadcast accessories
get you connected reliably. From F connectors to phono jacks,
look to Pomona for parts you can depend on.
79
Molded thermoplastic
construction provides
maximum durability
Ratings: The components in this section have a hands free rating for use in controlled voltage environments. www.pomonaelectronics.com
However, for CE compliance these products are not intended for hand held use at voltages above 33 Vrms/70 Vdc.
Audio/Video/Broadcast
Streamlined profile with compact shell. Time saving assembly (3 parts). No set
screws. Solderable.
Panel Cut-Out
7272
7111
XLR Female 3-Pin
Square Flanged Panel 3-pin XLR square panel mount receptacle for
Model# Type horizontal PC board mounting. Sturdy all metal
XLR Adapters Receptacle, Horizontal one piece design. Housing is die-cast zinc
6856 XLR (F)/XLR (F)
PC Board alloy with tarnish resistant black nickel plating.
6857 XLR (M)/XLR (M) Solder cup terminations. Front mountable.
6857
7115
XLR (F) 3-Pin Square
Flanged Panel 3-pin XLR square panel mount female recep-
Model# Type tacle with sturdy all metal one piece design.
XLR to 1/4 in Adapters Receptacle Housing is die-cast zinc alloy with tarnish
6863 XLR (F) / 1/4 in Plug (stereo)
resistant black nickel plating and gold plated
6864 XLR (M)/1/4 in Plug (stereo) contacts. Solder cup terminations. Front
mountable.
Adapters offers 3 contact XLR to 1/4 inch
6863 conversion. Sleek light weight design. XLR
body is die cast zinc alloy with tarnish
resistant nickel-plating. 1/4 inch plugs are
nickel-plated machined brass. XLR contacts
are nickel-plated brass.
6864
Model# 4054
BNC Male to Phono Jack
Rating: Maximum voltage for
5117A 1.40in
XLR Male Panel (35.56mm) hands free use: 500 Vrms, +257˚F
(+125˚C) max.
Receptacle, 3-Pin 3-pin XLR rectangular panel mount male recep-
tacle with sturdy all metal one piece design.
Housing is die-cast zinc alloy with tarnish
resistant nickel plating. Solder cup terminations.
Front mountable.
Model# 1297
BNC Female to 1/4in
(6.35mm) Phone Plug Rating: Maximum voltage for
hands free use: 500 Vrms, +257˚F
(+125˚C) max.
2.46in (62.48mm)
6854 Convert 2 conductor audio jacks
XLR Female Panel 0.25in
(6.35mm)
to BNC.
Receptacle, 5-Pin 5-pin XLR rectangular panel mount receptacle
with sturdy all metal one piece design. Housing 0.25in (6.35mm)
is die-cast zinc alloy with tarnish resistant
nickel plating. Solder cup terminations. Front
mountable.
Model# 3837
BNC Female to Two
Conductor, 0.14in (3.5mm) Rating: Maximum voltage for
Dia. Mini Phone Plug hands free use: 500 Vrms, +257˚F
(+125˚C) max.
Model# Type
1/4 in, Panel Mount
7156 2-conductor
Phone Jacks 7157 3-conductor
7107
XLR Female, 4-Pin,
Designed for insulated panel mount
Rectangular Flanged 4-pin XLR rectangular panel mount receptacle
with low internal contact resistance.
with sturdy all metal one piece design. Housing
Panel Mount is die-cast zinc alloy with tarnish resistant Body is diecast zinc alloy with
nickel plating. Solder cup terminations. Front tarnish resistant nickel plating.
mountable. Hardware includes one copper alloy
7156 7157 nickel-plated hex nut, and one steel
nickel-plated washer.
Model# Type
1/4 in, PC Board Mount
7158 PC board mount,
Phone Jacks 3-conductor
7108 7159 PC board mount,
XLR Female 3-Pin, 2-conductor
Rectangular Flanged 3-pin XLR rectangular panel mount receptacle
7160 PC board mount,
with sturdy all metal one piece design. Housing
Panel Mount is die-cast zinc alloy with tarnish resistant black 3-conductor
nickel plating. Solder cup terminations. Front
mountable. PC board mounts for connection
7158 with standard commercial phone
plugs. Solderable with nickel silver
7160 contacts.
7159
7152
Model# Type
F Within Series Adapters RCA (phono) Plug
6881
6712 F (m/f) Right angle
1.0in 0.92in Sleek silver and gold compact design.
(25.4mm)
6713 F (m/f) In line,
(23.3mm) Handles up to 6.0 mm (0.24 in) O.D.
Push-on
cable. Body is made of die cast zinc
6800 F (m/f) Right angle alloy with tarnish resistant nickel-plating.
Contacts are gold-plated brass.
Material: Machined, nickel-plated
brass
6712 6713
0.75in
(19.05mm)
1.22in
(30.99mm)
Model # 4408M
Test Lead Rack
• Magnetic, attach to tool box or
other steel cabinet. Model # 6534
• Neat storage for leads. Coaxial Lead Set Lead Set
• Easy access. • Complete set of coaxial leads.
• Molded strain relief.
• Seven piece set from 1 to 10ft
(0.3 to 3.05m).
• Standard BNC connectors fit
oscilloscopes and other
instruments.
Model# 6411
Basic Backprobe Pins
• Make connection to terminals
inside connectors up to 1in
(25.40mm) deep.
• For low voltage use < 30V.
• Pkg of 10.
www.pomonaelectronics.com
IC Test Clips and Adapters
Innovative solutions. Pomona Electronics’ IC Test Clips – designed for
your chip. Uniquely designed for testing surface mount devices –
easily, securely and successfully. Low-profile fine-pitch chips,
densely populated boards, or vertical boards, POMONA
84 test clips connect you with confidence.
Measure Critical Dimension with calipers adapter, turn to the PLCC table on page DIP table on page 85 and reference to the SOIC/SOJ table on page 85 and
parallel to the plane of the PCB 84 and reference the following charac- the following characteristics of your reference the following characteristics
teristics of your target chip: target chip: of your target chip:
1. Number Of Leads 1. Number Of Leads 1. Number Of Leads
Critical Dimension 2. Body Size 2. Test Clip Contact Style 2. Confirm Body Width Compatibility
(see Fig. 1 & 2, page 85) 3. For Lower and Top Test Clip Width
(see Fig. 1, 2 & 3, page 85)
T
L
D
Critical Dim. C = D - 2 (L - T)
www.pomonaelectronics.com
IC Test Clips and Adapters
Pomona DIP Test Clips provide fast, reliable and Fig.1: Spring-actuated clip features gold-plated
secure connections to socketed and through-hole beryllium copper or spring-tempered nickel silver
DIP chips. Available in two styles, DIP Test Clips pins to assure positive contact in a firm wiping
give you the option of full coverage of clip contacts action for hands-free testing.
for maximum durability or open contacts at the Fig. 2: Clip features same construction as Figure 1
board level for easier access to chip leads. except for an opening on the outside of the contact
housing to permit probing while the clip is attached
Fig. 1 Fig. 2 to the DIP.
Model# No. Lower Body Widths Top Width Typical Applications Fig.
SOIC/SOJ Test Clips Leads Width (A) (B)
SOIC Clip test clips feature a narrow-profile design that
® 5250 8 0.26in 0.15in to 0.3in 0.430in Analog Devices AD834JR, 1
makes testing SOIC and SOJ chips on densely-populated (6.60mm) (3.81mm to 7.62mm) (10.92mm) Triquint TQ9122N
boards easier and safer. 5251 14 0.410 0.15in to 0.3in 0.755in Motorola HCT08A, Philips 1
(10.41mm) (3.81mm to 7.62mm) (19.18mm) 74HC125
A 5413 14 0.410 0.15in (3.81mm ) 0.520in Harris HFSP43280, Goldstar 2
(10.41mm) (13.20mm) GM76C256
A A 5252 16 0.460 0.15in to 0.3in 0.830in Maxim MAX791, Microlinear 1
(11.68mm) (3.81mm to 7.62mm) (21.08mm) ML6509, AMD 26LS31
5253 20 0.560 0.15in to 0.3in 1.030in Linear Tech. LT1130, Maxim 1
(14.22mm) (3.81mm to 7.62mm) (26.16mm) MX7226, Motorola HCT373A
5254 24 0.660 0.15in to 0.3in 1.230in Altera EP610APC, Linear Tech. 1
(16.76mm) (3.81mm to 7.62mm) (31.24mm) LT1130, Motorola MC22V10S
5437 28 0.760 0.15in to 0.3in 1.430in Texas Inst. SN74F32D, Altera 1
(19.30mm) (3.81mm to 7.62mm) (36.32mm) EPM5032, Raytheon TMC1171
B B B 6107 32 0.870 0.30in to 0.60in 0.870in Toshiba TMPN3120, Hitachi 3
(22.10mm) (7.62mm to 15.24mm) (22.10mm) HM628128, NEC D431000AGW
Fig. 1 Fig. 2 Fig. 3
6108 40 1.070 0.30in to 0.60in 1.070in — 3
(27.18mm) (7.62mm to 15.24mm) (27.18mm)
Fig. 1: Fig. 2: Fig. 3: 6109 44 1.170 0.30in to 0.60in 1.170in — 3
Spring-loaded SOIC This 14-pin clip New 32-, 40- & (29.72mm) (7.62mm to 15.24mm) (29.72mm)
Clip attaches to tar-
®
features a slider that 44-pin SOIC/SOJ 5514 SOIC Clip Test Kit contains 1
®
get chip and holds presses the contact test clip is a new each 8 - 28 pin clips
on with spring pres- housings against design of the
sure against the chip the chip and spring-loaded
body. Contacts on provides a more clip that features
top of the clip are secure connection double-row .025
0.025in (0.635mm) on surface mounted wire wrap pins for
pins at 0.10in chips with gull easy connection
(2.54mm) spacing. wing or “J” leads. to ribbon cable.
Designed to attach Compact design is This clip will fit all
to surface-mounted ideal for testing on SOIC/SOJ chips
chips with either gull densely-populated between 0.30in
wing or “J” leads. boards. (7.62mm) and
0.60in (15.24mm)
width.
Lead Pitch: 0.050in (1.27mm).
www.pomonaelectronics.com
Static Control Products
Working with static sensitive devices? Pomona enables you to work with
confidence when using our static control accessories. Whether you choose
to purchase our selection of grounding systems or build your own
ESD set-up, Pomona gives you a variety of individual accesso-
ries. Our accessories also make a perfect addition to
86
our Test Companion Kits.
www.pomonaelectronics.com
Static Control Products
Model# 5532
Stacking Snap
Banana Jack Attach this jack to either banana snap
stud (male) or banana snap socket
(female). It allows multiple attachment
to the same grounding point. Snap is
3/8in (9.52mm).
Material: High conductivity copper
with tin plated finish.
Model# 5534
Antistatic Ground Cord
These patch cords feature a molded-
in 1 Megohm resistor at the snap
end. The 5534 has a straight banana
plug, the 6085 has a right angle plug.
Nominal extended length is 72in
(183cm).
www.pomonaelectronics.com
Telecom Products
Accuracy and repeatability – Pomona connects to the telecom industry
with an impressive selection of test accessories. Ideal for network
testing, troubleshooting, leave-in-the-line patching,
or system prototyping, Pomona Electronics’ traditional
88 reliability adds up to the quality connection
telecom professionals demand.
Model# 6568
Universal DSX-3 Test Kit
• Ideal for OSP/CO technicians.
• Kit reduces the need for multiple cables to service
and test DSX-3 panels.
• Adapters quickly convert BNC cables to Mini or
Standard WECO interfaces.
• Cables are color coded blue (transmit) and red
(receive) for ease of testing.
• Strain reliefs are molded directly to the cable and
BNC plugs for added pull strength.
• Test Companion pouch allows for convenient
accessory storage.
Kit includes:
One blue BNC Male Cable Assembly
One red BNC Male Cable Assembly
Four Standard WECO to BNC Adapters
Four Mini-WECO to BNC Adapters
Test Companion Shoulder Pack
Model# Length
BNC Male to Bantam
6517-96 96in (2.4m)
Plug Cable
Cable Type: RG59 Type.
Bantam: Nickel-plated brass.
www.pomonaelectronics.com Ratings: The components in this section have a hands free rating for use in controlled voltage environments.
However, for CE compliance these products are not intended for hand held use at voltages above 33 Vrms/70 Vdc.
Telecom Products
Model# Length
Bantam Plug to Two
5026-36 36in (0.9m)
Alligator Clips
5026-60 60in (1.5m)
5026N-60 60in (1.5m)
Model# Length
75Ω BNC Male to Standard Bantam Plug:
6516-96 96in (2.4m) 5026: Unplated brass.
WECO (WE090) Connector 5026N: Nickel-plated brass.
Cable Cable Type: RG59 Type.
Rating: Maximum voltage for
hands free use: 150 Vrms, +122˚F
(+50˚C) max.
Cable Type: 2 Conductor Shielded
Microphone, 0.180in (4.57) O.D.
Model# Length
Bantam Plug to Minigrabber ®
Bantam Plug:
5019: Unplated brass.
5019N: Nickel-plated brass.
Model# Length Rating: Maximum voltage for
Mini-WECO (440) Plug hands free use: 300 Vrms,
6502-96 96in (2.4m)
Patch Cord +122˚F (+50˚C) max.
Cable Type: RG59 Type. Cable Type: 2 Conductor Shielded
cable, 0.180in (4.57) O.D.
Model# Length
WE310 Plug to Two
3352-A-60 60in (1.5m)
Alligator Clips 3352N-A-60 60in (1.5m)
WE310 Plug:
3352: Unplated brass.
3352N: Nickel-plated brass.
Rating: Maximum voltage for hands
free use: 150 Vrms., +122˚F (+50˚C)
max.
Model# Clip Type Length
Cable Type: 2 Conductor Twisted Piercing Clips to
6484-60 Bed of Nails and 60in
Pair, 0.250in (6.35mm) O.D. Bantam Plugs Single Needle (1.52m)
Patch Cord 6486-60 Bed of Nails 60in
(1.52m)
www.pomonaelectronics.com
*see rating message at start of section.
Category Index
www.pomonaelectronics.com
Category Index
www.pomonaelectronics.com
Category Index / Alphabetical Index
www.pomonaelectronics.com
Model Number Index
Model# Page# Model# Page# Model# Page# Model# Page# Model# Page#
www.pomonaelectronics.com
Model Number Index
Model# Page# Model# Page# Model# Page# Model# Page# Model# Page#
www.pomonaelectronics.com
Model Number Index
Model# Page# Model# Page# Model# Page# Model# Page# Model# Page#
www.pomonaelectronics.com
Many Ways to Find Answers
www.pomonaelectronics.com
99
Now there are three ways for you to find the
product you are looking for.
1. Search by Keywords
Simply click on [Search by Keywords] in the left-
hand column of the homepage. Then enter the
description of the product in the
keywords box and select [GO].
2. Search by Model #
Enter the model number of the Pomona product
into the [Search by Model No.] box and select [GO].
3. Search by Category
From the homepage, select [View Products] under
either “Test and Measurement” or “Broadcast/
Multimedia”. You will see a list of product
categories from which to choose.
Technical Support
techsupport@pomonatest.com
Because technical questions about products or
applications can arise almost anywhere, Pomona
offers technical support with a qualified resource
via e-mail or visiting the Pomona website. While
you are in the Technical Support section of our
website, you can also refer to selector guides, view
or request a catalog, or go directly to the specific
product information you seek.
Nothing in this catalog is to be construed as an offer. Product availability, prices and delivery dates are subject to Pomona’s order confirmation form. The
same applies to orders based on development samples delivered. Pomona products are intended to be used in accordance with the specifications in this cata-
log. Any use or application that deviates from those specifications may be dangerous. A limited warranty applies to Pomona products. Pomona will not be
liable for any loss, damage, cost of repair, or incidental or consequential damages of any kind, arising in connection with the design, manufacture, sale,
or repair of the products, whether based on express or implied contract, negligence or strict liability. Pomona will not be liable to buyer for any amount
exceeding the purchase price of the product which proves to be defective. Pomona will not be responsible or liable for any patent infringements or other
rights of third parties, which may result from the use of this catalog. Registered trademarks used in this catalog are the property of their respective companies.
www.pomonaelectronics.com
Professionals Trust
Pomona Performance
Copyright © 2007. Pomona is a trademark of Pomona Electronics. All other product and
company names are trademarks or registered trademarks of their respective companies.
Specifications subject to change without notice. All rights reserved. Printed in the U.S.A.