Beruflich Dokumente
Kultur Dokumente
ATOMIC STRUCTURE
Assessment Objectives
Candidates should be able to:
(a) identify and describe protons, neutrons and electrons in terms of their relative charges
and relative masses
(b) deduce the behaviour of beams of protons, neutrons and electrons in an electric field
(c) describe the distribution of mass and charges within an atom
(d) deduce the numbers of protons, neutrons and electrons present in both atoms and ions
given proton and nucleon numbers (and charge)
(e) (i) describe the contribution of protons and neutrons to atomic nuclei in terms of
proton number and nucleon number
(ii) distinguish between isotopes on the basis of different numbers of neutrons
present
(f) describe the number and relative energies of the s, p and d orbitals for the principal
quantum numbers 1, 2 and 3 and also the 4s and 4p orbitals
(g) describe the shapes of s and p orbitals
(h) state the electronic configuration of atoms and ions given the proton number (and
charge)
(i) (i) explain the factors influencing the ionisation energies of elements (see the
Data Booklet)
(ii) explain the trends in ionisation energies across a Period and down a Group of
the Periodic Table
(j) deduce the electronic configurations of elements from successive ionisation energy
data
(k) interpret successive ionisation energy data of an element in terms of the position of
that element within the Periodic Table
References
1. Understanding Advanced Physical Inorganic Chemistry by Jeanne Tan & Kim Seng
Chan (The content for this topic was adapted from the book‐Understanding Advanced Physical Inorganic
ChemistryThe Learner’s Approach by Jeanne Tan and Kim Seng Chan. Permission was granted by World
Scientific Publishing Co. Pte. Ltd. (http://www.worldscibooks.com/chemistry/7833.html)
2. Chemistry in Context by G C Hill & J S Holman
3. A Level Chemistry by E N Ramsden
4. Modern Physical Chemistry by G F Liptrot
5. Chemistry The Molecular Nature of Matter and Change by Martin S. Silbergberg
Page 1
1.1 THE SUB-ATOMIC PARTICLES OF MATTER
The 3 fundamental sub-atomic particles in matters are protons, neutrons and electrons.
Protons and neutrons are collectively known as nucleons. The nucleons reside in the small
nucleus of the atom whereas the electrons revolve around it in the “vast” empty space. The
size of an atom is easily more than 10 000 times that of the nucleus. The nucleus accounts for
most of the mass of an atom since the mass of the electron is negligible as compared to the
mass of the protons and neutrons.
An atom is electrically neutral and contains equal numbers of electrons and protons.
; Candidates should be able to deduce the behaviour of beams of protons, neutrons and
electrons in an electric field.
The behaviour of particles in an electric field depends on their mass and charge. Like
charges repel while unlike charges attract. Hence a beam of charged particles passing
through an electric field would be deflected.
Since neutrons are neutral, they will not be deflected but travel in a straight path
perpendicular to the direction of the electric field.
When a beam of protons passes through an electric field, the positively-charged particles will
deflect towards the negative plate.
As for a beam of negatively-charged electrons, these will deflect towards the positive plate
and to a greater extent since they are much lighter than the protons.
Page 2
▬
+
P
beam of n
particles
–
e
+
electric field
The amount of deviation from its original direction of movement is known as the angle of
deflection. The angle of deflection, θ can be expressed by the relationship below:
angle of deflection
Another way to measure the amount of deviation would to use the radius of deflection:
radius of deflection
This is possible if we imagine after deflection, the particle moves in a circular path. Hence
the factors affecting the radius of deflection is reciprocal to that for the angle of deflection.
Q: Why is the angle of deflection inversely proportional to the mass of the particle?
A: If two particles are moving at the same speed but one is more massive than the other,
the heavier particle would have a greater kinetic energy. Thus it requires more energy
to be exerted on the heavier particle to cause it to deflect. Since the applied electric
field is exerting the same amount of force on these two different particles with different
masses, the heavier particle would be deflected to a lesser extent.
The figure below shows how a beam containing: protons ( H+), deuterons ( H+) and protium
( H), are affected when passing through an electric field.
▬
H+
H+
2θ
beam of θ H
particles
+
electric field
Page 3
Being poositively-chaarged, both thhe protons and
a deuteronns will defleect towards the
t negativelly
charged plate
p (cathodde).
Howeverr, the angle of deflection for the deeuterons will be half thaat for the prrotons since a
deuteron has twice thhe mass of a proton.
1
H+ has a charge/mass ratio of 1//1 while 2H+ has a chargge/mass ratioo of ½.
As for thhe neutral hydrogen
h atooms, they w
will not be deflected
d butt travel in a straight patth
perpendiccular to the electric
e fieldd.
1.1.2 Isootopes
Isotopes are atoms of o the samee element thhat have diffferent massses due to the differen nt
number of neutronss present. An n example iss the pair deeuterium ( H)
H and protiuum ( H). Thhe
latter is looosely called
d hydrogen atom.
Isotopes usually havve the samee chemical pproperties siince they haave the sam me number of o
protons and
a hence thhe same num mber of elecctrons. How wever, their pphysical pro
operties diffe
fer
since theyy have different numberr of neutronss and hence different
d maass.
For instaance, molecuules of 35Cl2 and 37Cl2 unndergo the saame chemicaal reactions but
b pure 35Cl
C2
oint than 37Cl
will havee a lower deensity, meltinng point andd boiling po C 2 (refer to Chapter 2 foor
explanatiion on these differences)).
Q: Wh hy do isotopees react simiilarly?
A: Thiis is becausee in a chemiical reactionn, it is the electrons
e thaat are transfeerred betweeen
diffferent atoms; atoms eitheer gain, losee or share eleectrons. The nucleus rem mains intact.
To distin
nguish amon ng the isotoppes present, a classificatiion system iis devised. Inn this system
m,
the nuclid
de of an elem
ment is repreesented by thhree notationns as shown below.
• T atomic sy
The ymbol (X) reepresents eacch element on
o the perioddic table.
• A
Atomic Num
mber/ Proton
n Number (Z mber of protons in the nuucleus.
Z) is the num
• Mass Numb
M ber/ Nucleon
n Number (A) is the sum
s of prottons and neeutrons in thhe
nuucleus.
Q: What is the meaning of this symbol 8O2–?
A: This represents an oxide ion. The subscript on the left is the atomic number whereas
the superscript on the right indicates the extra electrons the oxygen has acquired. For
this 8O2– species, the number of protons (8) is not equal to the number of electrons
(10). The number of electrons would be the same as the number of protons for a
neutral atom only.
The mass of an atom is very small, ranging from 10–24 to 10–22 grams. Chemists use a relative
atomic mass scale to compare the masses of different atoms. Initially, protium (1H) was used
as the atom for comparison as its nucleus only consists of 1 proton.
In 1961, the carbon-12 atom was adopted by the International Union of Pure and Applied
Chemistry (IUPAC) as the reference standard for relative atomic masses. On the carbon-12
scale, an atom of the isotope 12C is assigned with a mass value of 12 atomic mass unit
(a.m.u.). The relative masses of all other atoms are obtained by comparison with 1/12 of the
mass of a carbon-12 atom. Thus, relative atomic mass of an atom is a dimensionless (without
physical unit) quantity.
Page 5
• Dimensionless.
Relative • A formula unit is the
formula average mass of one formula unit of the substance smallest collection of
12
mass (Mr) relative to 1/12 of the mass of one atom of C atoms from which the
formula of an ionic
compound can be
established. It is equal to
the sum of the Ar of the
atoms shown in the
formula unit.
Example 1
35 37
Determine the Ar of chlorine given that there exist two isotopes, Cl and Cl, with
percentage isotopic abundance 75% and 25% respectively.
Solution:
Since Ar is a weighted average, one has to take into consideration the relative amount of each
isotopes. The following shows how to calculate a weighted average:
Ar of chlorine = = 35.5
Q: It seems that the relative isotopic mass is a whole number. Is it really so?
A: The word ‘relative’ means that the value obtained is measured with respect to some
other thing, hence this number has no physical unit. In this case here, the relative
isotopic mass of an isotope is the mass measured with respect to 1/12 of the mass of a
12
C atom, which has a value of 1 unit (1/12 × 12). As the mass of an atom arises mainly
from the nucleus and since the total number of nucleons in 35Cl is 35, the relative
isotopic mass seems to have a value of 35 too. But in reality, the actual relative isotopic
mass is less than the mass of all nucleons added up. This phenomenon is known as
mass defect. The differences in the two masses (less than 1%) arise because part of the
mass has been converted to binding energy (according to E = mc2) which is necessary
to hold the nucleons together.
Page 6
When scientists study the atoms of various types of elements, they found out that each of the
electrons in an atom occupy a specific region in space known as an atomic orbital. The
atomic orbital is a region of space from near the nucleus to a certain distant away. In the
atomic orbital, one can have approximately 90% chances of finding the electron there. Do not
forget that an electron is not stationary but constantly moving around!
Due to this unique occupancy in space, each electron would have a specific amount of energy
and we said that the energy is quantized. Thus the four quantum numbers could be used to
represent a specific energy level an electron would have.
The importance of the Principal Quantum Number is that it indicates the average distance of
the orbitals from the nucleus, hence the amount of attractive force the nucleus is exerting on
the electron residing in it. The value of n takes on integers starting from 1, 2, 3 and so forth.
An electron in the n =1 principal quantum shell is the closest to the nucleus, thus most
strongly attracted and has the least energy. In other words, the greater the value of n, the
further the electrons are from the nucleus, the greater is the energy of the electrons.
Q: Why does the energy of an electron increase as we move away from the nucleus?
A: By convention, when an electron is ‘free’, that is, not subjected to any other
electrostatic interactive forces (attractive or repulsive), it has an assigned zero energy.
This is when the electron is infinitely away from the nucleus. But now if you want to
bring an electron from n=1 Principal Quantum Shell to infinity, you got to do work
against the attractive force of the nucleus, you got to ‘break’ the ‘bond’ between the
electron and the nucleus. Breaking bond needs energy. The energy that you put in while
doing work (energy is conserved from Law of Conservation of Energy) is gained by
this electron, hence its energy has increased. When an electron moves from infinity and
is attracted by the nucleus, a ‘bond’ is formed, and energy will be released. The
following diagram would help in the explanation.
Page 7
At infinity distance from the nucleus,
energy of a free electron is zero, i.e. Einfinity = 0 .
ΔE1 ΔE2
Since ΔE2 < ΔE1, we say that more energy is absorbed by Electron 1 than by Electron
2 in order to reach the same infinity distance from the nucleus. Therefore, Electron 1
must be at a lower energy level than Electron 2. Such consideration is important to be
in line with the concept that when energy is being absorbed, it is a positive quantity.
This corresponds with work being done against an opposing force and in this case here,
bond breaking. In contrast, the release of energy is a negative quantity, corresponding
to the formation of bond. This also explains why by convention, scientists assign a
negative sign to the energy possessed by an electron in an atom.
• The number and type of sub-shells possible is in turn limited by the principal quantum
shell number. When n=1, there is only the 1s sub-shell possible. When n = 2, there are
two types of sub-shells, namely the 2s and 2p sub-shells. When n = 3, there are the 3s,
3p and 3d sub-shells.
Page 8
When we piece all these information together, we will end up with a pattern as shown below
in Table 3.
From this table, it can be shown that in the nth Principal Quantum Shell, there are n number of
sub-shells consisting of n2 number of orbitals with a maximum number of 2n2 electrons.
The diagram below is a schematic representation of the energy levels, indicating the relative
energies of the various orbitals. Generally, for the same value of n, the relative energies of
the orbitals increase in the following order: s < p < d < f.
4p 4p x 4py 4pz
N (n=4)
3d 3dxy 3dyz 3d xz 3d z2 3dx2-y2
Increasing
energy 4s 4s
3s 3s
2p 2p x 2py 2pz
L (n=2)
2s 2s
1s 1s
K (n=1)
Page 9
Q: Why does the 4s sub-shell have a lower energy than the 3d sub-shell given that n=4
Principal Quantum Shell should have a higher energy than n=3 Principal Quantum
Shell ?
A: n=4 should have a higher energy than n=3. But the s sub-shell has a relatively lower
energy than the d sub-shell for the same Principal Quantum Shell. These 2 different
opposing factors counteract each other, resulting in the 4s sub-shell having a lower
energy than the 3d sub-shell. The same explanation account for the relative energies of
the 5s and 4d sub-shells.
Q: Does that mean that the 4s sub-shell is now closer to the nucleus than the 3d sub-shell?
A: No. On the average, n=4 Principal Quantum Shell is still further away from the nucleus
than n=3. So although the energy of 4s sub-shell is lower than the 3d sub-shell, it does
not imply that the distances have changed. Remember a Principal Quantum Shell is
actually a band, not a single discrete line.
Instead of representing orbitals as an electron map showing the electron density, we make use
of geometrical shapes to denote the orbitals.
• s orbitals
o are spherical whereby the spherical surface indicate region whereby there is 90%
probability in locating an electron.
z
y x
• p orbitals
o are shaped like “dumb-bells”.
o A set of three degenerate (same energy) p orbitals make up the p sub-shell.
o These three orbitals differ only in their spatial arrangements, being mutually
perpendicular to each other as shown in the diagram:
o Each p orbital is approximately 1/3 of the s orbital in the same Principal Quantum
Shell, which means that three p orbitals would have the same volume as an s
orbital.
Page 10
z z z
y x y x y x
• d orbitals
o are shaped like a “four-petal flower”.
o A set of five degenerate d orbitals make up a d sub-shell. Each d orbital is about
20% the size of an s orbital
z z z
y x y x y x
z z
y x y x
For a particular type of orbital, when the value of n increases, the orbitals become more
diffuse. What do we mean by this? Taking the s orbitals for instance, all s orbitals are
spherical but they get larger as the value of n increases. With a 2s orbital larger than a 1s
orbital, the probability of finding an electron in a 2s orbital is spread across a greater space,
thus this electron would be less strongly attracted by the nucleus as compared to one in the 1s
orbital. As we view the electron as a negative-charged cloud, this would mean a lower charge
density and hence a more diffuse orbital.
; Candidates should be able to describe the number and relative energies of the s, p and d
orbitals for the principal quantum numbers 1, 2 and 3 and also the 4s and 4p orbitals.
(1) The greater the Principal Quantum Number, the higher the energy of the electron,
hence lesser amount of energy would be required to remove it (a process known as
ionization).
Page 11
(2) Different sub-shells have different energy level, i.e. s < p < d < f. Hence an electron
from s sub-shell being at a lower energy level (slightly closer to the nucleus), would
require more energy to remove it as compared to a p electron.
(3) Within the same sub-shell, the orbitals would have the same energy. We say that they
are degenerate.
(4) For increasing n values, orbitals of the same sub-shell type would occupy a bigger
region of space, hence more diffuse. This is important as we will use it for
understanding the strength of a covalent bond.
; Candidates should be able to state the electronic configuration of atoms and ions given the
proton number (and charge).
Electronic configuration represents the electronic structure of an atom. It refers to the way in
which the electrons are distributed among the various orbitals.
1s 2s 2p
As shown by the diagram below, the order progresses from 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p
and so forth.
When the electrons in an atom occupy orbitals of lowest available energy, the atom is said
to be in its ground state.
Page 12
When an electron is promoted to an orbital with higher energy level, the atom is unstable
and is said to be in an excited state.
(ii) Each orbital can only contain a maximum of two electrons of opposite spins. This is
known as the Pauli Exclusion Principle.
; :
Q: Why can’t two electrons in the same orbital have the same spin?
A: Well, when an electron spins, this spinning charged-particle creates a magnetic field. If
two electrons spin in the same direction, the magnetic field created would be repulsive
in nature and the energy level of these two electrons would be higher as compare to if
they spin in opposite directions to create an attractive magnetic field. An analogy can
be used here: Picture a spinning electron as moving in one particular direction. Two
such spinning electrons will be moving in opposite directions and the chances of them
‘meeting’ will be lower. This results in lesser inter-electronic repulsion.
(iii) When filling a set of degenerate orbitals (orbitals in the same sub-shell and of the same
energy), ensure that each orbital is half-filled before completely filling another one. This
is known as Hund’s Rule of Multiplicity.
p4 ; p4 :
Page 13
Q: Why do we need to first place electrons in empty orbitals of the same sub-shell before
pairing them in an orbital?
A: Well, electrons repel each other. By occupying different orbitals, the electrons remain
as far apart as possible from one another, thus minimizing electron-electron repulsion.
Take note that each orbital represent a particular region of space, hence two different
orbitals would be two different region of space separated from each other. Take for
instance the three p orbitals in a p sub-shell, each is oriented perpendicularly from each
other, occupying different regions in space.
Example 2
State the electronic configuration of an 8O atom. Hence sketch, on the given axes, the shapes
of all the orbitals that are occupied by electrons.
Solution:
Electronic configuration of 8O atom: 1s2 2s2 2p4
Example 3
State the electronic configuration of 25Mn atom. Hence sketch an energy level diagram to
illustrate its electronic configuration.
Page 14
Solution:
Electronic configuration of 25Mn: 1s2 2s2 2p6 3s2 3p6 3d5 4s2
energy
4s
3d
3p
3s
2p
2s
1s
Q: Why is the electronic configuration of 25Mn not 1s2 2s2 2p6 3s2 3p6 3d7?
A: The 4s orbital is filled first before the 3d orbitals. This is because the 4s orbital has a
lower energy level as compared to the 3d orbitals.
Q: If the 4s is filled before the 3d, why the electronic configuration of 25Mn not
1s22s2p63s23p63d54s23d5?
A: The electronic configuration is always written in the order of increasing Principal
Quantum Number. This also indicates the order of increasing energy level of the
various sub-shells.
Example 4
State the electronic configuration of 25Mn2+. How many unpaired electrons does it have?
Solution:
2+
25Mn has the electronic configuration of 1s22s22p63s23p63d5 and thus it has 5 unpaired
electrons.
Page 15
Exercise
Write down the electronic configurations of the following species.
–
(a) 15P3 (b) 19K+ (c) 22Ti2+ (d) 24Cr
Solution
Electronic configurations of:
–
(a) 15P3 : 1s22s22p63s23p6
(b) 19K+: 1s22s22p63s23p6
(c) 22Ti2+: 1s22s22p63s23p63d2
(d) 24Cr: 1s22s22p63s23p63d54s1
Approach:
1. First, write down the electronic configurations for the neutral atom.
2. Remember to add electrons to the 4s orbitals before the 3d orbitals.
3. Remove or add the relevant number of electrons to the electronic configuration of the
neutral atom to get that of the cation or anion respectively.
4. Remember to remove electrons from the orbitals with the highest energy.
Thus remove electrons from the 4s orbitals before the 3d orbitals.
3–
15P and 19K+ are an example of a pair of isoelectronic species.
More detailed explanations on the writing of electronic configurations for transition elements
would be covered later in the course.
Page 16
1.4 IONISATION ENERGIES
• First ionisation energy (1st I.E.) is the energy required to remove 1 mole of
electrons from one mole of gaseous atoms in the ground state to form one mole of
gaseous singly-charged cations.
• The second ionisation energy (2nd I.E.) is the energy required to remove 1 mole of
electrons from one mole of gaseous singly-charged cations to form one mole of
gaseous doubly-charged cations.
; Candidates should be able to explain the factors influencing the ionisation energies of
elements.
The magnitude of ionization energy serves as a measure of the strength of attraction between
the positively-charged nucleus (due to the protons present) and the valence electron that is to
be removed.
The ionization energy of an atom or ion is mainly influenced by the following factors:
(i) the effective nuclear charge acting on the electron;
(ii) inter-electronic repulsion between electrons in the same orbital;
(iii) the orbital where the electron comes from;
(iv) the distance between the nucleus and the electron to be removed; and
(v) the charge of the cation.
Page 17
1.4.1.1 The Effective Nuclear Charge Acting on the Electron
An electron in the atom faces two main electrostatic forces, namely, the attractive force by
the nucleus and the repulsive force by electrons closer than itself to the nucleus. This
repulsive force is termed as ‘screening effect’ or ‘shielding effect’ as it seems to ‘block’ the
electron from being attracted by the nucleus. The repulsive force caused by electrons from
the same Principal Quantum Shell is usually ignored as its effect is quite minimal; electrons
in the same shell exert a negligible shielding effect on one another since they hardly come
between each other.
Thus, one can see that the actual net attractive force on a valence electron is actually much
lesser than the number of protons in the nucleus. This net attractive force is termed the
effective nuclear charge (ENC) and it can be approximated by the following:
For example:
The greater the ENC, the greater amount of energy needed to remove the electron(s) i.e.
ionization energy will increase, which means that a valence electron is easier to be removed
than an inner core electron. And very importantly, ENC increases across a period of
elements.
Q: Does that mean that each of the 6 valence electrons is attracted by 1/6 of the ENC,
which is 1 proton?
A: No. Each of the 6 valence electrons is attracted by 6 protons. This is because the 6
valence electrons are moving round the nucleus within the same distance from the
nucleus and the nucleus is considered a point charge. Therefore, the ENC is the same
on each of the valence electrons.
Q: Does that mean that the ENC on each the two 1s electrons is equivalent to 8 protons?
A: Yes. There are no other inner core electrons before the n=1 Principal Quantum Shell,
therefore there is no shielding effect. The ENC on each of the electron in the n=1 sub-
shell is the same, i.e. equivalent to 8 protons.
Page 18
1.4.1.2 Inter-electronic repulsion between electrons in the same orbital
Ionization energy can be lowered if the electron is being removed from an orbital that contain
another electron as compared to another case whereby the orbital contains a singly unpaired
electron.
Take for instance, the 1st I.E. of Oxygen (1310 kJ mol–1) is lower than that of Nitrogen (1400
kJ mol–1) because the inter-electronic repulsion made the removal of one of the paired
electron much easier.
2 2 3 2 2 4
7N: 1s 2s 2p 8O: 1s 2s 2p
1s 2s 2p 1s 2s 2p
This inter-electronic repulsion factor can be used to account for the lower than expected I.E.
of a species with the ns2np4 valence shell electronic configuration compared to another with
the ns2np3 valence shell electronic configuration.
However, it cannot be used to account for the difference in I.E. between atoms or ions of the
ns1 versus the ns2 valence shell electronic configuration. For instance, Beryllium (1s22s2) has
higher 1st I.E. than Lithium (1s22s1) because of its higher effective nuclear charge. Although
the inter-electronic repulsion in the 2s sub-shell of Be does make the removal of one of the
paired electrons easier than in Li, the ENC effects far outweigh the inter-electronic repulsion
effect!
Q: The ENC of an O atom is greater than the N atom. So shouldn’t this cause the O atom
to have a higher 1st I.E.?
A: Yes, the ENC of O atom is greater than the N atom and this should cause it to have a
higher 1st I.E. But experimentally, it has been found that O atom has a lower 1st I.E that
what was expected. There must be some other factors that have yet to be considered.
The only reason we can use to explain the data collected would be to employ the inter-
electronic repulsion factor. As shown here, there is the interplay of two opposing
factors but it seems that the inter-electronic repulsion is a more dominant factor than
the ENC effect.
Q: Why is the domineering effect of the inter-electronic repulsion over the ENC factor
being observed in the oxygen versus nitrogen case but not in the beryllium-lithium
scenario?
A: Remember we mention before that a p orbital is 1/3 the size an s orbital from the same
Principal Quantum Shell? Thus because of this different in size, the inter-electronic
repulsion is more prominent in a p orbital than the much bigger s orbital.
Page 19
1.4.1.3 The orbital where the electron comes from
The orbital where the electron comes from also affect the I.E.
Take for instance, the 1st I.E. of Boron (799 kJ mol–1) is lower than that of Beryllium (900 kJ
mol–1). The reason is because the electron that is being removed from a Boron atom comes
from a 2p sub-shell that has a higher energy level than the 2s sub-shell, therefore it requires
lesser amount of energy to be removed.
1s 2s 2p 1s 2s 2p
This factor can be used to account for the lower than expected I.E. of a species with the
ns2np1 valence shell electronic configuration compared to another with the ns2 valence shell
electronic configuration.
Q: The ENC of a B atom is higher than that of a Be atom but there is inter-electronic
repulsion faced by the electrons in the 2s sub-shell of Be. Are these two factors less
dominant than the ‘difference in energy level’ factor?
A: You are right. Based on the ENC factor, B is expected to have a higher 1st 1.E. than Be.
But this not what experimental data makes of it. If we are to consider inter-electronic
repulsion factor, Be should have a lower 1st I.E but observed data proves otherwise.
Hence, the only factor that could be used to account for the observed experimental data
would be because the 2p electron is at a higher energy level than the 2s electron.
Thus we expect electron being removed from a higher Principal Quantum Shell (n increases
down a group) needs lesser amount of energy as it is further away from the nucleus.
Q: Why would attractive force be weaker, the further the electron is from the nucleus?
A: The electrostatic force (F) between the nucleus and electron can be approximated to F ∝
1/r2, where r is the distance of separation between the charges. Thus, as r increases, the
strength of the electrostatic force decreases drastically.
Page 20
1.4.1.5 The charge of the cation
; deduce the electronic configurations of elements from successive ionisation energy data
; interpret successive ionisation energy data of an element in terms of the position of that
element within the Periodic Table
The removal of an electron from a +2 cation is greater than from a +1 cation, and so forth for
the same element. Take for instance, the 2nd I.E. of Ca is greater than its 1st I.E. This is
because when we remove the 2nd electron from a Ca+(g) species, the total number of electrons
in Ca+(g) is fewer than in Ca(g). But both Ca(g) and Ca+(g) still have the same nuclear
charge. The inter-electronic repulsion of the electron cloud in Ca+(g) is lesser than that of
Ca(g), resulting in a stronger net attractive force for the electrons in Ca+(g), and thus higher
I.E. The same reasoning applies for the increase in consecutive ionizations of the same
element.
For example:
Thus, we can make use of the successive I.E. values to deduce information regarding number
of valence electrons the element has. This number of valence electrons corresponds to the
Group Number of the element in the Periodic Table.
Example
The first four successive IEs (in kJ mol–1) of element W are as follows:
577, 1820, 2740, 11600
Solution:
W belongs to Group 3.
A big jump in energy is seen between the 3rd and the 4th IE. This implies that the 4th electron
to be removed belongs to a Principal Quantum Shell that has a lower energy than the one that
the valence electrons have occupied. Therefore there are only 3 electrons in the valence shell
of W.
Page 21
Approach:
1. Tabulate the differences between successive ionisation energies.
2. To determine the group in which W belongs to, we must determine the number of valence
electrons. The point where a big jump in I.E. occurs indicates the removal of successive
electron from an inner principal quantum shell.
Exercise
The first seven successive I.E.s (in kJ mol–1) of element X are as follows:
1010, 1905, 2910, 4965, 6275, 21270, 25430
We will now apply the factors that influence ionization energies to account for periodic table
trends across the period and down the group.
1st I.E.
He
Ne
F
N
C
O
Be
B
Li
Na
Atomic number
The graph shows the trend in first ionization energy across Period 2.
• In general, first ionization energy increases across a Period.
• From Li to Ne, nuclear charge increases but shielding effect is (i) effective nuclear
charge acting on
relatively constant since the number of inner core electrons is the electron
same across a period.
Overall, the effective nuclear charge increases, resulting in electrons being pulled
closer towards the nucleus. It becomes increasingly difficult to remove the valence
electron, i.e. more energy is required, and thus 1st I.E. increases.
If we go by the general trend of increasing I.E. across the period, we would expect the 1st. I.E.
of B to be higher than that of Be and likewise, the 1st I.E. of O to be higher than that of N.
However, experimental data concludes that it is not the case.
Page 22
• B has a lower first I.E. than Be since less energy is needed to (ii)orbital where
remove its 2p electron which is at a higher energy level (further the electron
comes from
away from the nucleus) than the 2s electron of Be.
(iii)inter-electronic repulsion
• O has a lower first I.E. than N as less energy is required to between electrons in the
remove one of the paired 2p electrons since there is inter- same orbital
electron repulsion between these electrons in the same orbital.
• Na has a lower first I.E. than Li as lesser energy is required to (iv) the distance between
remove a 3s electron in Na which is further away from the nucleus and the electron
to be removed.
nucleus than a 2s electron in Li.
As we move down a group, nuclear charge increases but electrons are being added to
a higher Principal Quantum Shell which is further away from the nucleus. These
results in the valence electrons experiencing weaker attractive force, and are
consequently easier to be removed.
Page 23
Period 2 Li Be B C N O F Ne
Atomic 152 112 88 77 70 66 64 70
Radii (pm)
• In general, atomic radius decreases across a Period.
• From Li to Ne, nuclear charge increases but shielding effect is relatively constant
since the number of inner core electrons is the same across a period. Overall, the
effective nuclear charge increases, resulting in electrons being pulled closer towards
the nucleus. Thus atomic radius decreases. Group 1
Atomic Radii (pm)
Li 152
• In general, atomic radius increases down a group.
• As we move down a group, nuclear charge increases but Na 186
electrons are being added to a higher Principal Quantum Shell
which is further away from the nucleus. This results in the K 227
valence electrons experiencing weaker attractive force, which
gives rise to greater atomic radius. Rb 248
Cs 265
Five important points to understand so far:
(1) I.E. generally increases across a period because of greater ENC.
Fr 270
This is due to increase in nuclear charge but a relatively constant
shielding effect as the number of inner core electrons is the same
across a period.
(2) Elements from the same period may have different I.E. due to the following reasons:
• ENC factor; e.g. Nitrogen atom has a higher I.E. than Carbon atom because Nitrogen
atom has greater ENC.
• Inter-electronic repulsion factor; e.g. the comparison between Oxygen atom indicates
that it has a lower I.E. than Nitrogen atom.
• p electron has higher energy than s electron; e.g. Boron atom has lower I.E. than
Beryllium atom.
(3) I.E. decreases down a group because although nuclear charge increases, electrons are
being added to a higher Principal Quantum Shell which is further away from the
nucleus. These results in the valence electrons experiencing weaker attractive force, and
are consequently easier to be removed.
Page 24
(4) Successive I.E. of an element increases because the inter-electronic repulsion decreases
due to a decrease in the number of electrons but nuclear charge is still the same, hence
net attractive force increases.
(5) Both I.E. and atomic radius across a period or down a group can be accounted for by the
ENC factor.
Page 25