USB Safety =
Detector Instructions om
‘Thank you for choosing our USB Safety Detector, this is electronic besad
‘equipment with compact size, exquisite appearance and highly (ECERUNERERRIIONY double-click the screen flicker and load
accuracy. This product is not only possess detection display function of the standard 1.00 load (the ideal is to set 1.00 constant current load
USB whichis including current and voltage, capacity, eectecty, meter), Afterwards double-click again, it wll display .00A on the
temperature and charging timing, but also have functions of whistle Sctand owe sted “peeg eased ters the spall oad then
slarm and automatically cut ot line output when sppeat high voltage, Seccoch wil ep deshionaral acpatenalconieneand ete
current and leakage of electricity. Supportto quick the new accuracy. Thus, the system willuse the calibrated parameters
to run for the nest time (click the button to enter the next step)
the number will adjust to the standard power
supply of 5.00V, the monitor indicates the current voltage valve of
category ‘minimum maximum accuracy curacy, Davbie-click the sereen Micker,it willbe automaticaly
Input voltage Soov” “Soov. O01 {idjusted to .00V when double-clckin the second time, After
Input current 0.004 SOR OL {albration, the speaker will "beep" and confirm automaticaly
Cumulative capacity range 00000mAh 99959mAh wien means calibration is completed. lick the bution toenter the
Cumulative electricity range 000.000Wh 999 999Wh next sty
Cumulativetimingrange 000:00:00 999:59:59 the system defaults more
Cumulative temperaturerange 0 a
0100 24:00
‘000:000W 998.999W
00.00" 99999
‘than "200V" protection, Double-click the screen Ficker to enter the
made of adjustment A, dectease setting: one click s dec
‘or press “click” then iong press can continue to decrea
Setting: double click increase by 0.1V or press. “double click” then
Tong press can continue to. decrease. After adjustment, lashing will be
Pressand hold thebuttontoentrthe sing made before poweringup, __sappedand the sethng willbe signed ot which means Setting
short prestuilenckcrculany Ikecurentcabraton. voltage Completed (cette button to enter the ex stp)
Calibration, high voltage protection threshold and capacity a