Beruflich Dokumente
Kultur Dokumente
Technical data
Power supply
Supply voltage U b=7.5 to 45 VDC(without display) , polarity protected
Resistance 0 to 40 0 10
Resistance( )
transmitter 0 to 2000 100
*á=5000ppm/K or 6180ppm/K
Connection type: 2-, 3- or 4-wire connection
Sensor current: 0.5 mA
B(PtRh30-PtRh6) 0 to 1820 ( 32 to 3308 ) 500K
E(NiCr-CuNi) -270 to 1000 (-454 to 1832 ) 50K
J(Fe-CuNi) -210 to 1200 (-346 to 2192 ) 50K
K(NiCr-Ni) -270 to 1372 (-454 to 2501 ) 50K
Thermocouples(TC)
N(NiCrSi-NiSi) -270 to 1300 (-454 to 2372 ) 50K
R(PtRh13-Pt) -50 to 1768 ( -58 to 3214.4 ) 500K
S(PtRh10-Pt) -50 to 1768 ( -58 to 3214.4 ) 500K
T(Cu-CuNi) -270 to 400 (-454 to 752 ) 50K
Output
Output signal 4 to 20 m A
Underranging
Linear drop to 3.8 mA
Signal on alarm Overranging
linear rise to 20.5 mA
Linearisation/transmission
Temperature linear, resistance linear, voltage linear
behaviour
Performance characteristics
Response time 1s
Reference operating
conditions Calibration temperature: 23 (73.4 ) 5K
Switch on delay 5s
Filter configurating
0 to 160 A
Resolution
0.3 A
0 to 40 0 0.1 or 0.08%
Resistance
0 to 2000 1.5 or 0.12%
transmitter( )
Environment conditions
Ambient temperature
-40 to 85 (-40 to 185 )
limits
Condensation Allowable
Others
Dimensions 44 mmX22.5 mm
Housing: PC
Material Potting: epoxy
Electrical connections
Setup Interface
Display interface
7.5 to 45VDC
4 to 20 mA
Demotions
Dimensions in mm (in)
How to programme
Supply+
USB Modem PC
Supply-
Display interface
USB interface