Beruflich Dokumente
Kultur Dokumente
• Short-Circuit Protection
•
IN – 1 14 OFFSET 1N1
Offset-Voltage Null Capability IN + 1 VCC +†
2 13
• Wide Common-Mode and Differential OFFSET 1N2 3 12 OUT
Voltage Ranges VCC – 4 11 NC
• No Latch-Up OFFSET 2N2 5 10 OUT
• Designed to Be Interchangeable With IN + 6 9 2 VCC +†
Fairchild µA747C and µA747M IN – 7 8 OFFSET 2N1
OFFSET 1N1
amplifier featuring offset-voltage null capability.
1 V CC +†
Each half is electrically similar to uA741.
IN +
The high common-mode input voltage range and
IN –
NC
the absence of latch-up make this amplifier ideal
for voltage-follower applications. The device is 3 2 1 20 19
short-circuit protected and the internal frequency OFFSET 1N2 4 18 OUT
compensation ensures stability without external NC 5 17 NC
components. A low-value potentiometer may be VCC – 6 16 NC
connected between the offset null inputs to null out NC 7 15 NC
the offset voltage as shown in Figure 2. OFFSET 2N2 8 14 OUT
9 10 11 12 13
The uA747C is characterized for operation from
0°C to 70°C; the uA747M is characterized for
2 V CC +†
IN –
OFFSET 2N1
IN +
NC
operation over the full military temperature range
of – 55°C to 125°C.
ÏÏÏ
IN+ + † The two positive supply terminals (1 VCC + and 2 VCC +) are
ÏÏÏ
OUT connected together internally.
IN – –
OFFSET N1 OFFSET N2
AVAILABLE OPTIONS
PACKAGE
14-PIN 20-PIN
VIO Max
TA SMALL OUTLINE CERAMIC DIP PLASTIC DIP FLAT PACK CHIP CARRIER
AT 25°C
(D) (J) (N) (W) (FK)
0°C
to
6 mV uA747CD — uA747CN — —
70°C
–55°C
to
5 mV — uA747MJ — uA747MW uA747MFK
125°C
The D package is available taped and reeled. Add the suffix R to the device type, (i.e., uA747CDR).
PRODUCTION DATA information is current as of publication date. Copyright 1990, Texas Instruments Incorporated
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
IN –
OUT
IN +
OFFSET N2
OFFSET N1
VCC –
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
uA747C uA747M UNIT
Supply voltage, VCC + (see Note 1) 18 22 V
Supply voltage, VCC – (see Note 1) – 18 – 22 V
Differential input voltage (see Note 2) ± 30 ± 30 V
Input voltage any input (see Notes 1 and 3) ± 15 ± 15 V
Voltage between any offset null terminal (N1/N2) and VCC – ± 0.5 ± 0.5 V
Duration of output short circuit (see Note 4) unlimited unlimited
Continuous total dissipation See Dissipation Rating Table
Operating free-air temperature range 0 to 70 – 55 to 125 °C
Storage temperature range – 65 to 150 – 65 to 150 °C
Case temperature for 60 seconds FK package 260 °C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds J or W package 300 °C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds D or N package 260 °C
NOTES: 1. All voltage values, unless otherwise noted, are with respect to the midpoint between VCC + and VCC –.
2. Differential voltages are at the noninverting input terminal with respect to the inverting input terminal.
3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less.
4. The output may be shorted to ground or either power supply. For the uA747M only, the unlimited duration of the short circuit applies
at (or below) 125°C case temperature or 75°C free-air temperature.
VI
Ï
–
OUT
Input +
0V
INPUT VOLTAGE
WAVEFORM CL = 100 pF RL = 2 kΩ
TEST CIRCUIT
APPLICATION INFORMATION
IN – –
OUT
IN + +
OFFSET N2
OFFSET N1
10 kΩ
To VCC –
TYPICAL CHARACTERISTICS†
INPUT OFFSET CURRENT
vs
FREE-AIR TEMPERATURE
100
90 VCC ± = ± 15 V
80
60
uA747C
50
40
30
IIIO
20
10
0
– 60 – 40 – 20 0 20 40 60 80 100 120 140
TA – Free-Air Temperature – C
Figure 3
350 VCC ± = ± 15 V
I IB– Input Bias Current – nA
300
250
uA747C
200
150
IIB
100
50
0
– 60 – 40 – 20 0 20 40 60 80 100 120 140
TA – Free-Air Temperature – C
Figure 4
† Data at high and low temperatures are applicable only within the rated operating free-air temperature range of the particular devices.
TYPICAL CHARACTERISTICS
MAXIMUM PEAK-TO-PEAK MAXIMUM PEAK-TO-PEAK
OUTPUT VOLTAGE OUTPUT VOLTAGE
vs vs
LOAD RESISTANCE FREQUENCY
ÁÁÁÁÁ
28 40
VCC – Maximum Peak-to-Peak Output Voltage – V
ÁÁÁÁÁ
TA = 25°C RL = 10 kΩ
24 32 TA = 25°C
22 28
20 24
18 20
16 16
14 12
ÁÁ ÁÁ
12 8
ÁÁ 10
ÁÁ VO(PP)
4
VCC
ÁÁ 8
0.1 0.2 0.4 0.7 1 2
RL – Load Resistance – kΩ
4 7 10 ÁÁ 0
100 1k 10 k
f – Frequency – Hz
100 k 1M
Figure 5 Figure 6
RL = 2 kΩ
TA = 25°C 106
VD – Differential Voltage Amplification
TA = 25°C
200
105
100 10 4
103
40 102
ÁÁ ÁÁ 101
ÁÁ
AAVD
20
ÁÁ ÁÁ
1
AAVD
10 10 – 1
0 2 4 6 8 10 12 14 16 18 20 1 10 100 1 k 10 k 100 k 1 M 10 M 100 M
|VCC ±| – Supply Voltage – V f – Frequency – Hz
Figure 7 Figure 8
TYPICAL CHARACTERISTICS
COMMON-MODE REJECTION RATIO OUTPUT VOLTAGE
vs vs
FREQUENCY ELAPSED TIME
100 28
VCC ± = ± 15 V
CMRR – Common-Mode Rejection Ratio – dB
90 RS = 50 Ω 24
TA = 25°C
80
20
VO – Output Voltage – mV
70 90%
16
60
50 12
VCC ± = ± 15 V
ÁÁ
40
8 RL = 2 kΩ
ÁÁ ÎÎÎÎÎ
30 CL = 100 pF
VO
4 TA = 25°C
20 10%
10
0
0
–4
ÎÎtr
Figure 9 Figure 10
VOLTAGE-FOLLOWER
LARGE-SIGNAL PULSE RESPONSE
8
VCC ± = ± 15 V
6 RL = 2 kΩ
CL = 100 pF
TA = 25°C
Input and Output Voltages – V
4
Output
2
0
Input
–2
–4
–6
–8
0 10 20 30 40 50 60 70 80 90
t – Time – µs
Figure 11
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
www.datasheetcatalog.com