ems onUte Sees anager choad cna ae ho ashe tr
‘enopa cl hi stands maybe recedes winou he pcr prmizn of Dt Naaeces te fir Homang VB
DEUTSCHE NORM
March 1996 (Novernber 1995)
Hot rolled I and H sections
(IPB series)
Dimensions, mass and static parameters
10877.140.70
Descriptors: Steel, sections, dimensions.
‘Supersedes March 1993 esition,
‘Warmgowalzte I-Tiger;I-Triger, IPB-Reihe; MaBe, Masse, statische Worto
{n keeping with current practice in standards published by the International Organization for Standaralzation (ISO), a comma
hhas been used throughout as the decimal marker
Dimensions in mm
Foreword
‘This standard has been prepared by the Normenausschuf Eisen und Stahl (Steel ard Iron Standards Committe).
should be noted that atthe European level ECISS/TC 11 is currently reviewing standardized sizes for sections and beating
piles with parallel flanges. Upon publication of the relevant European Standard, DIN 1025-2 to DIN 1025-6 will be withdrawn.
Amendments
{mn comparison with the October 1963 edtion, H sections wih tapered flanges are no longer included.
Previous editions
DIN 1812: 1924-09, 1982-01, 1943-03; DIN 1025-2: 1926-04, 1928-1" 929-12, 1952-09, 1999-09, 1940x-07, 1950-07,
1968-10, 1994-03,
1. Scope and field of application
‘This standard specifies dimensions and static parameters for
‘ot roled I and H sections (H sections, for shod), with paral-
lel anges, preferably made from DIN EN 10.025 steel.
‘This standard does not cover:
42) hot rolled I sections (I series, with a smaller ratio of
flange wid to web height; ef DIN 1025-1);
») hot rolled T and H sections (IPE% sevies, with thinner
webs and flanges; of. IN 1025-3);
) hot roled I and H sections (IPBY series, with thicker
webs and flanges; cf. DIN 1025-4);
4) hot rolled I and H sections (IPE series, with narrower
flanges; of. DIN 1025-5).
2. Normative references
‘This standard incorporates, by dated ot undated reference,
provisions from other publications. These normative refor-
fences are cited at te appropriate places in the text and the
Publications are listed hereatter. For dated references, sub-
Sequent amenciments to or revisions of any of these putica-
tions apply to this standard only wien incorporated init by
‘Bout Vatay Gm etn has Ba ec ct et Garson Saco (DOV Momen)
amendment or revision. For undated references, the latest
edition othe publication referred to applies.
DIN 1025-1
Steel sections; hot rolled I boams; dimensions, mass,
limit deviations and static values
DIN 1025-3
Hot roles I and H sections (LPBI sories); dimensions,
‘mass and state paramotors
IN 1028-4
Hot rolled I and H sections (IPBv series); dimensions,
mass and stale parameters
IN 1025-5
Hot rolled I and H sections (IPE series); dimensions,
mass and static parameters
DIN EN 10 0205
Hot rolled unafoyed structural stoel products; technical