Sie sind auf Seite 1von 1

FREE SAMPLE Ref : DGN1MDL001

WOOD CRATES 1x1x1

Instructions: 1 - Print this page on paper sheet (224gr/m is very good, 160-180gr/m is a minimum). 2 - Cut the crates by following the solid black lines. 3 - Pre-score the model. 4 - Start to glue the A tab, then, glue all the B tabs, and nally glue all C to close the crate. Thats it...Repeat steps 1/4 for each crate. Free model from www.stones-edges.com February 2004 by Stones Edges. Permission granted for non-commercial only. You may not sell, alter, modify, license, sublicense, copy, or use these le in any way other than has been specically authorized by Stones Edges.

Das könnte Ihnen auch gefallen