Beruflich Dokumente
Kultur Dokumente
Shri Y.P.Rana,
Head, TTID/PPG, SPACE APPLICATIONS CENTRE (SAC), Indian Space Research Organization (ISRO) And
Abhishek
10061
Signature: Date: 03-06-2011 Name: Y.P. RANA Place: Ahmedabad Designation: HEAD,TTID Name of the Organisation and Address: Space Application Centre, Indian Space Research organisation Department of space, Govt. Of India Ambawadi Vlstar P.O., Jodhpur Tekra Ahmedabad 380015, India
Organizational stamp:
2
Market Survey for New Antennas and Terminals Developed By SAC
Signature: Date: 03-06-2011 Name: ALOK SINGHAL Place: Ahmedabad Designation: SCI-SE Name of the Organisation and Address: Space Application Centre, Indian Space Research organisation Department of space, Govt. Of India Ambawadi Vlstar P.O., Jodhpur Tekra Ahmedabad 380015, India
Organizational stamp:
3
Market Survey for New Antennas and Terminals Developed By SAC
CERTIFICATE BY THE FACULTY GUIDE, SDM INSTITUTE FOR MANAGEMENT DEVELOPEMNT, MYSORE
This is to certify that Roll No 10061 Mr. ABHISHEK of PGDM Batch 2010-12 has satisfactorily completed Summer Internship Project titled Market Survey for New Antenna Technologies Developed by SAC at M/S Space Application Centre, Indian Space Research Organisation located at Ahmedabad from 15-04-2011 to 04-06-2011 to partially fulfill the requirements of the PGDM program under my guidance.
Signature: Name: Prof. Lt. Col. S.N. Prasad Designation: Chairman-Placements SDM Institute For Management Development, Mysore
Date:
Institutional Stamp
4
Market Survey for New Antennas and Terminals Developed By SAC
Acknowledgement
I take this opportunity to express my heartfelt gratitude to my project guides at the Space Applications Centre, Mr.Y.P.Rana, Head, TTID/PPG, Space Application Centre and Mr. Alok Singhal, Sci-SG, SAC- ISRO for giving me the opportunity to undertake this project. I am grateful to them for their prolonged interest in my work and excellent guidance. They have been a constant source of motivation for me throughout the course of this project. By their uncompromising demand for quality and insistence for meeting the deadlines, I could do such an excellent work in a short duration of seven weeks. They have shown me a way to pursue excellence. I am also thankful to all the scientists in Space Applications Centre, whom I have interacted with, for providing technical knowledge and diverse viewpoints, which helped me in completing the project. I offer my special gratitude to the entire ISRO family, for providing a friendly atmosphere during my summer internship, making it a delightful and memorable experience. The entire project has been a great learning experience. I also express my gratitude to all the respondents of my survey, whose feedback and response forms the brunt of this project. I thank the people with whom I had personal interactions about my project for their time and support. Without the constant help of all these people this project would never have reached fruition. I would also humbly acknowledge the encouragement extended to me by Col. S.N. Prasad, Professor, SDMIMD-Mysore, in pursuing this project.
I also thank Almighty God and my family and friends who have supported and inspired me throughout the completion of this project.
ABHISHEK
01-06-2011
5
Market Survey for New Antennas and Terminals Developed By SAC
EXECUTIVE SUMMARY
This project is aimed at exploring the societal and commercial applications of antennas developed at SAC, ISRO and identifying suitable private organizations for technology transfer and joint collaboration. The new antennas in question are: 1. SEQUENTIALLY ROTATED MULTILAYER STACKED PATCH ARRAY ANTENNA 2. BROADBAND MULTILAYER PRINTED ANTENNA 3. SPIRAL QAUDRIFILAR HELIX ANTENNA Also we looked at two new terminals that are using these antennas. These systems are 1. MSS TYPE-D TERMINAL 2. DISTRESS ALERT TRANSMITTER The MSS Type-D terminal uses the first antenna and Distress alert transmitter uses the third antenna. The main objective of this project was to interact with the antenna industry and create awareness about these new antennas and technologies. Also it was required to know their opinion about these antennas and find out if the industry is keen for technology transfer of any of these antennas. This report also contains a brief description of current market scenario and future market growth of antenna industry. The very first step in any market survey is to know the exact problem, the answer to which we are looking for. Following were the major questions that we need to clarify through our survey 1. 2. 3. 4. Are industries ready for these new antenna and system? What are the market segments? What additional improvement can be made? Find out the organizations for the technology transfer of these antennas and system.
The survey has been planned keeping these questions in mind. This report presents the detail explanations of each and every step taken during various stage of the survey. The various stages are Understanding the technologies Questionnaire design and refinement Identifying organizations for survey Data collection Survey Analysis Various findings were made during the course of the study and appropriate suggestions were recommended.
6
Market Survey for New Antennas and Terminals Developed By SAC
Contents
1. INTRODUCTION ............................................................................................................................... 9 1.1. 1.2. 1.3. 1.4. 1.5. 1.6. 1.7. 1.8. 2. 3. PROJECT OVER VIEW ................................................................................................................ 9 OBJECTIVES .......................................................................................................................... 9 METHODOLOGY ....................................................................................................................... 9 RESEARCH TYPE...................................................................................................................... 10 DATA COLLECTION TECHNIQUES ............................................................................................ 10 LIMITATION OF THE STUDY .................................................................................................... 10 PROJECT PROFILE ................................................................................................................... 10 PROJECT TIMELINE ................................................................................................................. 11
ORGANIZATION PROFILE: ISRO....................................................................................................... 12 ANTENNA INDUSTRY AND ITS MARKET .......................................................................................... 13 3.1 3.2 3.3 3.4 ORIGIN OF ANTENNAS............................................................................................................ 13 GLOBAL MARKET CURRENT SCENARIO AND ITS FORECAST ................................................. 14 WIRELESS ANTENNAS SCALING NEW HEIGHTS..................................................................... 16 THE ROAD AHEAD .................................................................................................................. 18
4.
TERMINALS AND ANTENNAS UNDER CNSIDERATION ..................................................................... 19 4.1. 4.2. 4.3. 4.4. 4.5. MSS TYPE-D TERMINAL .......................................................................................................... 19 SEQUENTIALLY ROTATED MULTILAYER STACKED PATCH BROADBAND ARRAY ANTENNA ........ 23 BROADBAND MULTILAYER PRINTED ANTENNA ...................................................................... 25 DISTRESS ALERT TRANSMITTER .............................................................................................. 28 SPIRAL QUADRIFILAR HELIX ANTENNA AT UHF BAND ............................................................. 30
5.
MARKET SURVEY PLAN AND ITS EXECUTION ................................................................................. 31 5.1 5.2 5.2.1 5.2.2 5.2.3 5.3 5.4 UNDERSTANDING THE TECHNOLOGIES ....................................................................... 31 QUESTIONNAIRE DESIGN AND REFINEMENT .............................................................. 32 QUESTIONNAIRE DESIGN .................................................................................................... 32 QUESTIONNAIRE PREPARED FOR ANTENNAS DEVELOPED BY ISRO. .................................... 34 REFINEMENT ...................................................................................................................... 34 IDENTIFYING ORGANIZATIONS FOR CONDUCTING SURVEY ................................... 35 SURVEY ANALYSIS .................................................................................................................. 36
6.
7
Market Survey for New Antennas and Terminals Developed By SAC
APPENDIX I LIST OF FIGURES ............................................................................................................... 43 APPENDIX II E-MAIL SENT TO VARIOUS ORGANIZATION ...................................................................... 44 APPENDIX III QUESTIONAIRRE ............................................................................................................. 45 APPENDIX IV POSTERS ........................................................................................................................ 50 APPENDIX V LIST OF VARIOUS ANTENNAS COMPANIES SELECTED....................................................... 56 APPENDIX VI ANTENNA TERMINOLOGY .............................................................................................. 57 REFERENCES .......................................................................................................................................... 59
8
Market Survey for New Antennas and Terminals Developed By SAC
1. INTRODUCTION
1.1. PROJECT OVER VIEW
This project is aimed at exploring the societal and commercial applications of antennas developed at SAC, ISRO and identifying suitable private organizations for technology transfer and joint collaboration. This project involves understanding these technologies, exploring their application both commercially and for society, conducting a survey among the industry to know whether they are ready to accept and implement these technologies. Finally a report consisting of the feedback from the industry regarding the marketability of these technologies, the details of the organizations that are willing to accept these technologies and the applications for which they want to market these technologies is submitted.
1.2.
OBJECTIVES
To communicate with the industry about the technologies developed at SAC and their potential applications that can be used with these technologies. To analyze if the industry is ready to accept these technologies. To identify suitable companies for technology transfer and joint collaboration.
Antennas considered for this project a) Sequentially Rotated Multilayer stacked patch array antenna (used in MSS Type D terminal) b) Broadband multilayer printed antenna (used in CAL-VAL project- Trans-Receive terminal) c) Spiral quadrifilar helix antenna (used in Distress alert transmitter)
Terminals considered for this project a) MSS Type D Terminal b) Distress Alert Transmitter
1.3.
METHODOLOGY
With the aim of achieving the above mentioned objectives, this project was executed in the following stages. Understanding the different aspects of these antennas and corresponding systems and its usefulness. Estimation of the market value of the technologies. Search and Identification of organizations, which might be interested in these technologies. Conduct a survey among the organizations to know whether these technologies are preferable for commercial use, whether the organizations are willing to market them and whether any changes are required to make these technologies commercially viable.
9
Market Survey for New Antennas and Terminals Developed By SAC
Analysis of the survey results and preparation of a report. This report features whether these technologies are commercially viable, are there any additional features to be incorporated to make these technologies commercially viable and also to provide a list of organizations interested in taking up of technology transfer / joint collaboration of these technologies.
1.4.
RESEARCH TYPE
In this research exploratory research is used and research plan is unstructured and flexible. Both quantitative and qualitative approaches have been used to get a better understanding of the customers.
1.5.
A combination of Questionnaire and Personal interviews was used to collect the survey data from the respondents. This combination is much more effective in eliciting the required data from the respondents than using any one of them alone.
1.6.
1.7.
PROJECT PROFILE
10
Market Survey for New Antennas and Terminals Developed By SAC
1.8.
PROJECT TIMELINE
15-04-2011 to 25-04-2011 Understanding the technology 25-04-2011 to 29-04-2011 Questionnaire Preparation 02-05-2011 to 06-05-2011 Question review and Refinement 03-05-2011 First Presentation 09-05-2011 to 11-05-2011 Collecting company contact information and short listing of companies 12-05-2011 to 25-05-2011 Conducting survey 26-05-2011 to 27-05-2011 Survey result analysis 28-05-2011 to 29-05-2011 Report Writing 30-05-2011 Report Review 01-06-2011 Final presentation 02-06-2011 Final report submission 04-06-2011 Farewell
11
Market Survey for New Antennas and Terminals Developed By SAC
12
Market Survey for New Antennas and Terminals Developed By SAC
Figure 1: A painting of Michael Faraday. Being a great experimentalist, he naturally dabbled in chemistry, shown here. Heinrich Hertz developed a wireless communication system in which he forced an electrical spark to occur in the gap of a dipole antenna. He used a loop antenna as a receiver, and observed a similar disturbance. This was 1886. By 1901, Marconi was sending information across the Atlantic. For a
13
Market Survey for New Antennas and Terminals Developed By SAC
transmit antenna, he used several vertical wires attached to the ground. Across the Atlantic, the receive antenna was a 200 meter wire held up by a kite. In 1906, Columbia University had an Experimental Wireless Station where they used a transmitting aerial cage. This was a cage made up of wires and suspended in the air, resembling a cage. A rough outline of some major antennas and their discovery/fabrication dates are listed: Yagi-Uda Antenna, 1920s Horn antennas, 1939. Interesting, the early antenna literature discussed waveguides as "hollow metal pipes". Antenna Arrays, 1940s Parabolic Reflectors, late 1940s, Patch Antennas, 1970s. PIFA, 1980s.
Current research on antenna involves metamaterials (materials that have engineered dielectric and magnetic constants that can be simultaneously negative, allowing for interesting properties like a negative index of refraction). Current research focuses on making antennas smaller, particularly in communications for personal wireless communication devices (e.g. cell phones). A lot of work is being performed on numerical modeling of antennas, so that their properties can be predicted before they are built and tested.
3.2
As per the research conducted by bcc research, USA following key points came to forefront.
14
Market Survey for New Antennas and Terminals Developed By SAC
Figure 2: Global Antenna current market and its forecast Another famous research agency, ABI Research, confirms the same. If the result of ABI research is believed to be true than the global market for antennas for wireless infrastructure, including base station, fixed and active types, is set to reach almost $2.0 billion in 2016. So-called active antennas are the hot segment of this market. Widespread installations of active antennas, which combine the base stations RF electronics in the antenna housing mounted at the top of the tower, have only begun quite recently. According to research director Lance Wilson, Active antennas offer a solution to the problem of rapidly growing wireless data traffic. Conventional designs are not as efficient; active antennas offer much greater efficiency and versatility when handling large quantities of signals, including wireless data. Apart from the active segment, the antenna market can be described as stable and mature. Market growth is gradual and steady, says Wilson. That, along with the huge size of the market (from a component or subassembly standpoint), is precisely part of its appeal for vendors. The antenna vendor ecosystem is slightly unusual in that there are multiple tiers and many participants. The bulk of these vendors are small companies that command only fractional percentages of the total available market. ABI Research believes that some market consolidation is likely. The scenario for active antennas is a bit different, with antenna manufacturers normally partnering with equipment builders. Will 4G provide much stimulus to the antenna market? Some upside is present with LTE/4G, says Wilson, but this will be moderated by the eventual decline in the GSM family of technologies. With the exception of still-developing regions, GSM infrastructure is largely built-out already. 4G wont replace the millions of existing GSM base stations with similar quantities. Mr. Simon Qiu, chairman, Kenbotong Communication, has the following to say...
15
Market Survey for New Antennas and Terminals Developed By SAC
There are many types of antennae that are making their presence felt, both globally and locally. Our company has a wide range of Wi-Fi, GSM, 3G, indoor, and GPS antennae. These are dominating the market at present. Also, the technological advancement that wireless antenna market has seen in the last one year includes Wi-Fi, 3G, MIMO, and CPE antennae. While the industry faces issues like site selection and has serious concerns on more and more clients, the requirement for covert communication is also spiking up. Nonetheless, decorative, MIMO, LTE, and microwave antennae will also be driving the growth in the current fiscal.
3.3
No doubt the tremendous growth of telecom sector in India has given a boost to the Indian antenna industry. Our discussion for the market growth of antenna will be incomplete without giving a proper look into the wireless antennas. As the need for faster, easier, and reliable connectivity is mounting in emerging economies like India, wireless technology is creating a huge appeal for sophisticated voice and data services. The broadband hungry nation represents a huge potential for wireless technologies such as WiMax, Wi-Fi, 3G, in addition to GSM, CDMA, and UMTS. India being one of the huge markets in the world in terms of telecom infrastructure investment, is gearing hard towards wireless options in providing broadband connectivity. And wireless antenna plays an important and significant role in the execution of wireless system. The country is relatively young in the wireless communication sector as it was only in 1995, when the first wireless communication network was set up. The need to connect rural to global has essentially opened up the need for wireless technologies in a big way and with recent announcement of 3G guidelines, the industry is betting big for the next level of growth. Ironically, in the past, the role of antennas in finished product was often undervalued. As in order to achieve better performance sometimes a sizeable amount of endeavor is put into enforcing a variety of coding techniques in radio systems. On the other hand, the strength of a chain is determined by the weakest link and as a section of the wireless communication system link, the antenna performance is equally important. Moreover, if the antenna system can give a nice and clear signal source for the radio parts, it would be actually much easier for signal processing and optimizing. To achieve greater strength, it is also important to pay proper attention to critical electrical and mechanical characteristics apart from frequency band, beam width, and gain. It is important to mention that while electrical parts include gain related to the distance of coverage, vertical beam width, horizontal beam width, front to back ratio, and inter-modulation (related to signal interference), the mechanical part includes size and weight (as one site can only carry a few antennas) and material related with lift time. Heading in a New Direction The market, according to experts, is becoming ever more sophisticated because of the tendency of industry players to focus on more highly engineered site architecture that could enable them to reap benefits such as reduced operation cost, improved coverage in rural areas, share multiple frequency bands, and greater control over their network.
16
Market Survey for New Antennas and Terminals Developed By SAC
In the present scenario, variable tilt, higher gain, multi-band, and remote electrical tilt (RET) antennas have become increasing popular as compared to earlier fixed-tilt single band antennas. Further, with the emergence of 3G markets, tri-band antennas have become essential in providing value added services such as mobile broadband. The need of multi-band antenna is gaining traction in the market. A single multi-band antenna can operate under GSM, CDMA, and 3G frequencies, and can be shared by different operators. Another trend, according to industry experts is the increasing traction of high-gain antenna. India has a large rural area; operators need high gain antenna to cover this area and to reduce the number of sites, thus to reduce the cost. The high gain antenna has an ability to cover larger areas as compared to low-gain and middle gain antennas, says Navin Vohra, country manager and director, South Asia operations, Andrew Wireless Solutions. The company has made significant investments in terms of manufacturing facilities in India and continues to invest in R&D. With the growing need of the Indian market, which is building tens of thousands of sites every year, the requirement of antennas is huge. We will put more effort on reaching to consumers and open an antenna manufacturing factory in India with other antenna vendors to reduce the cost in the future Vohra added. Also with the diversion of telecommunication market toward spread spectrum (UMTS and CDMA) technology, antennas such as Di-Pole require controlling radiation patterns, which significantly impact the capacity of the network and user experience. Further, in new technologies that use TDD and MIMO capabilities, antennas are needed to accomplish beam forming, which is the basis of an optimized network, feel industry experts. Antenna is an integral part of any wireless technology. It receives and transmits the signal of an entire system. It plays an important role in SNR (signal-noise rate), conversion quality, reliability of system, coverage, etc, says Geng Jie, general manager, India, Mobi Antenna Technologies. The company is presently offering BTS antennas including GSM, CDMA, UMTS, and 3G, microwave antennas and accessories and RF devices such as filters, duplexers, couplers, etc. According to Monica Wang, international sales manager, Kenbotong Communication, Antenna is a very important segment of wireless communication. It is important to develop advanced technology antennas to meet Indian market requirements. The growth of the market is mainly dependent upon telecom infrastructure growth. At present, the China-based company is offering antennas for Wi-Fi indoor coverage, WLAN, passive components, etc, and planning to bring their expertise in India. As a passive device that converts RF signals bonded to transmission lines into free space radio waves, antennas are integral to enabling wireless systems to ensuring mobility, optimal capacity, and the quality and durability of RF reception, says Navin Vohra, country manager and director, South Asia Operations, Andrew Wireless Solutions. The need is undertake consistent research and develop tailor-made products as per the specific need of consumers. As such, while fixed- tilt single band antennas were commonly used in the past, variable- tilt, higher gain, multi-band and remote electrical-tilt (RET) antennas becoming increasingly popular over the
17
Market Survey for New Antennas and Terminals Developed By SAC
last two years. This move enables service providers to enhance their service offerings with improved data rates and access more potential customers.
18
Market Survey for New Antennas and Terminals Developed By SAC
Figure 4.1.A: MSS Type D Terminal The Indian Space Research Organisation (ISRO) has developed INSAT based Mobile Satellite Service (MSS) Terminal called MSS Type D Terminal, which will find wide commercial and special application. This terminal provides voice communication link between two portable terminals and between terminals to PSTN network via hub station. The MSS Type D System is having portable terminal with flat panel antenna and operates in S-band. This is a battery operated terminal with talk time of 3 Hrs and standby time of 24 Hrs. MSS type D terminal requires a compact size planar array antenna having 15.5 dBi gains with axial ratio better than 1 dB for both transmit and receive frequency band (i.e. 20% bandwidth at S band).
19
Market Survey for New Antennas and Terminals Developed By SAC
SYSTEM DESCRIPTION
Use of small portable terminal is possible because of the specialized MSS (Mobile Satellite Service) transponder in INSAT. In this system a small portable terminal, of the size of a small brief case weighing around 5 kg is used for communication. The portable satellite terminal is served by a central Hub station which has a DAMA network manager. Calls could be made between any two satellite terminal or satellite terminal and hub. The Hub station is C-band 6.1 M station. The transmit and receive IF is connected to Hub modem and DAMA equipment that includes a network server and a switch. In the DAMA system, a pool of satellite channel is kept at Hub station and assigned on demand basis to satellite terminals. Two numbers of signaling channels are there in the systems, one for sending request message by all satellite terminals sharing the carrier and another common channel for channel allotment to all satellite terminals from Hub station.
20
Market Survey for New Antennas and Terminals Developed By SAC
21
Market Survey for New Antennas and Terminals Developed By SAC
22
Market Survey for New Antennas and Terminals Developed By SAC
Figure 4.2.A: Blue print of Sequentially Rotated Multilayer Stacked Patch Broadband Array Antenna This antenna has been used in MSS TYPE D Terminal. The features of this antenna are listed below It has EM coupled stacked patch for broadband. It uses dual edge fed method for circular polarization. Corporate feed network using T power divider. Its sequential rotation helps greatly in improving the axial ratio. It has a gain of 15.5 dB. Axial ratio is less than 1 dB over -+10 degrees. Impedance bandwidth more than 18% at S band. Polarization : LHCP(Type-D) RHCP(Multimedia) Size: 195 x 385 x 12 mm Weight: 340 gm.
23
Market Survey for New Antennas and Terminals Developed By SAC
Comparison of its axial ratio with Astra made similar antenna is as listed below
24
Market Survey for New Antennas and Terminals Developed By SAC
4.3.
Figure 4.3.A: Blue print of Broadband Multilayer Printed Antenna Space Applications Centre of Indian Space Research Organisation at Ahmedabad has developed multilayer printed antenna technology and delivered antenna for various ISRO's projects. The salient feature of this antenna includes light weight structure, can be made conformal to the surface, computer controlled automated fixture for aligning layers, inspection of layers and bonding of layers. There is an ever increasing demand of multilayer printed antenna from mobile communication to very sophisticated space qualified active phased array antenna systems.
25
Market Survey for New Antennas and Terminals Developed By SAC
The design includes the usage new type of light weight low dielectric constant material for high radiation efficiency, low surface wave propagation, low cross polar suppression. The development include fixture capable of performing surface roughness using laser, inspection of PCB, high speed drilling, vacuum bagging for bonding all the antenna layers and vacuum gripping for pick and place. It can also be used for the fleet monitoring system. It has inbuilt GPS system installed in it. The return loss for this antenna is better than 15 db. The axial ratio is better than 3 db. Peak gain is 7 db at bore sight and it is left hand circularly polarized.
26
Market Survey for New Antennas and Terminals Developed By SAC
Other important features of this antenna are . Dual stacked patch for wideband Dual edge fed patch Wilkinson power divider for improvement in axial ratio
27
Market Survey for New Antennas and Terminals Developed By SAC
4.4.
Figure 4.4.A: Distress Alert Transmitter Space Applications Centre of Indian Space Research Organisation at Ahmadabad has developed Distress Alert Transmitter (DAT) which can be used to transmit emergency conditions and position location to central HUB station for rescue operation. It can be installed in boats or other vehicles. DAT combines the message with position of the boat obtained through GPS, and transmits the same to a central HUB station via UHF transponder of INSAT. Distress message along with position, received at HUB can be used to mount quick rescue operation.
28
Market Survey for New Antennas and Terminals Developed By SAC
29
Market Survey for New Antennas and Terminals Developed By SAC
4.5.
Figure 4.5: DAT and Spiral quadrifilar Helix antenna. This antenna has been widely used in Distress Alert Transmitter technology discussed above. Following are its renowned features: It is compact in size for omnidirectional pattern. It is spiral in shape and that gives better Front to back ratio. It uses self-phasing method for circular polarization It has two bifilar helical loop in a mutually orthogonal on a common axis.
30
Market Survey for New Antennas and Terminals Developed By SAC
31
Market Survey for New Antennas and Terminals Developed By SAC
2. State the kind of interviewing technique Interviewing method can be telephone, mails, personal interview or electronic interview. Telephonic interview can be computer assisted. Personal interview can be conducted at respondents place or at mall or shopping place. Mail interview can take the form of mail panel. Electronic interview takes place either through electronic mails or through the internet. 3. Decide the matter/content of individual questions There are two deciding factors for this. a. Is the question significant? - Observe contribution of each question. Does the question contribute for the objective of the study? b. Is there a need for several questions or a single question? - Several questions are asked in the following cases: When there is a need for cross-checking When the answers are ambiguous When people are hesitant to give correct information. 4. Overcome the respondents inability and unwillingness to answer The respondents may be unable to answer the questions because of following reasons The respondent may not be fully informed The respondent may not remember He may be unable to express or articulate 5. The respondent may be unwilling to answer due to
There may be sensitive information which may cause embarrassment or harm the respondents image. The respondent may not be familiar with the genuine purpose The question may appear to be irrelevant to the respondent
The respondent will not be willing to reveal traits like aggressiveness 6. To overcome the respondents unwillingness to answer:
Place the sensitive topics at the end of the questionnaire Preface the question with a statement Use the third person technique (For example - Hari needed a job badly and he used wrong means to get it - Is it right?? Different people will have different opinions depending upon the situation) Categorize the responses rather than asking a specific response figure (For example -
32
Market Survey for New Antennas and Terminals Developed By SAC
Group for income levels 0-25000, 25000-50000, 50000 and above) 7. Decide on the structure of the question Questions can be of two types: Structured questions- These specify the set of response alternatives and the response format. These can be classified into multiple choice questions (having various response categories), dichotomous questions (having only 2 response categories such as Yes or No) and scales (discussed already). Unstructured questions- These are also known as open-ended question. No alternatives are suggested and the respondents are free to answer these questions in any way they like. 8. Determine the question language/phrasing If the questions are poorly worded, then either the respondents will refuse to answer the question or they may give incorrect answers. Thus, the words of the question should be carefully chosen. Ordinary and unambiguous words should be used. Avoid implicit assumptions, generalizations and implicit alternatives. Avoid biased questions. Define the issue in terms of who the questionnaire is being addressed to, what information is required, when is the information required, why the question is being asked, etc. 9. Properly arrange the questions To determine the order of the question, take decisions on aspects like opening questions (simple, interesting questions should be used as opening questions to gain co-operation and confidence of respondents), type of information (Basic information relates to the research issue, classification information relates to social and demographic characteristics, and identification information relates to personal information such as name, address, contact number of respondents), difficult questions (complex, embarrassing, dull and sensitive questions could be difficult), effect on subsequent questions, logical sequence, etc. 10. Recognize the form and layout of the questionnaire This is very essential for self-administered questionnaire. The questions should be numbered and precoded. The layout should be such that it appears to be neat and orderly, and not clattered. 11. Reproduce the questionnaire Paper quality should be good. Questionnaire should appear to be professional. The required space for the answers to the question should be sufficient. The font type and size should be appropriate. Vertical response questions should be used, for example: Do you use brand X of shampoo? Yes No 12. Pre-test the questionnaire The questionnaire should be pre-tested on a small number of respondents to identify the likely problems and to eliminate them. Each and every dimension of the questionnaire should be pre-tested. The sample respondents should be similar to the target respondents of the survey. 13. Finalize the questionnaire Check the final draft questionnaire. Ask yourself how much will the information obtained from each question contribute to the study. Make sure that irrelevant questions are not asked. Obtain feedback of the respondents on the questionnaire.
33
Market Survey for New Antennas and Terminals Developed By SAC
5.2.3 REFINEMENT
Once the questionnaire design was completed it was refined through the following stages By interviewing scientists inside SAC and incorporating their feedback. By interviewing the local industries and incorporating their suggestions. The final questionnaire is available in Appendix III.
34
Market Survey for New Antennas and Terminals Developed By SAC
Methodology
This was carried out in the following stages Compiling a database of organizations in the required business domains Defining the company qualifying criteria Short listing the organizations based on criteria Contacting organizations for Interview
35
Market Survey for New Antennas and Terminals Developed By SAC
5.4
SURVEY ANALYSIS
Out of many companies contacted we received the response from 8 companies. Their responses for various questions are as follows. Select the antenna about which you have heard before? - 75% of the companies have not heard about these antennas before.
Figure 5.4.1: Percentage of respondents who have heard about any of these antennas. Are you aware of the fact that ISRO is involved in the development of these antennas? - 75 % of the companies are not aware of the fact that ISRO is involved with the development of these antennas.
Figure 5.4.2: Percentage of respondents who were aware that ISRO was involved in the development of these technologies
36
Market Survey for New Antennas and Terminals Developed By SAC
Are you aware of the application of these antennas? - A whopping 88% of the respondents are not aware of the application of these antennas.
Figure 5.4.3: Percentage of respondents who were not aware of the application of these antennas Are you aware of the market segment for these antennas? - A whopping 88% of the respondents are not aware of the market segment of these antennas.
Figure 5.4.4: Percentage of respondents who were not aware of the market segment of these antennas.
37
Market Survey for New Antennas and Terminals Developed By SAC
Are you interested to enter into a joint collaboration with SAC for developing these antennas further? - 63 % of the companies surveyed are not interested in joint collaboration with ISRO to develop these antennas. - 37% of the companies surveyed are interested in joint collaboration with ISRO to develop these antennas.
Figure 5.4.5: Percentage of respondents who are interested to enter into joint collaboration with ISRO Are you interested in getting the technical know-how from SAC for the following antennas? - 62 % of the companies surveyed are interested in technology transfer from ISRO. - 38 of the companies surveyed are not interested in technology transfer from ISRO.
Figure 5.4.6: Percentage of respondents who are interested for technology transfer from ISRO
38
Market Survey for New Antennas and Terminals Developed By SAC
No of organizations interested for technology transfer of various antennas. - 3 organization were interested for the technology transfer of MSS Type D terminal - 5 organization were interested for the technology transfer of Broadband multilayer Printed antenna. - 1 organization was interested for the technology transfer of Distress Alert transmitter
Figure 5.4.7: No of organizations interested for technology transfer for various antennas Reason for not going for the technology transfer of these antennas. - Those who preferred not to go for the technology transfer 67 % said they outsource the required antenna. - Those who preferred not to go for the technology transfer 33 % said they have similar technology.
Figure 5.4.8: Reason for not going for the technology transfer from ISRO.
39
Market Survey for New Antennas and Terminals Developed By SAC
Other Information sought about these three antennas. - 20 percent of the respondent wanted to know about the cost of technology transfer to go for technology transfer further. - Remaining 80 % of the respondents wanted to know market segment, cost of technology transfer and cost of manufacturing to go for Technology transfer further.
Figure 5.4.9: Other information sought about these antennas If ISRO will provide you other antennas at cheaper cost and better efficiency, will you consider ISRO for other antennas too? - 75 percent of the respondents were ready to consider ISRO for other antennas too if ISRO can provide it at cheaper cost - 25 percent of the respondents were not ready to consider ISRO for other antennas too if ISRO can provide it at cheaper cost
Figure 5.4.10: Percentage of respondent eager to consider ISRO if they provide other antennas at cheaper cost.
40
Market Survey for New Antennas and Terminals Developed By SAC
Twin Antennas, Synergy telecom Pvt Ltd and Kenstel communication have already contacted the concerned person in TTID department to get the process forward for technology transfer All these organizations have the required technical expertise, manpower, financial resources. They are already in process to find out the customer base for such technology Kenstel Communication have already confirmed their desire to go for the technology transfer of MSS Type D terminal and Distress Alert Transmitter.
41
Market Survey for New Antennas and Terminals Developed By SAC
SAC can provide the technical know-how to the above mentioned organizations. These organizations have all the necessary criteria to successfully manufacture and market these technologies.
42
Market Survey for New Antennas and Terminals Developed By SAC
4.3.A 4.3.B
Blue print of Broadband Multilayer Printed Antenna Broadband Multilayer Printed Antenna
25 26
Distress Alert Transmitter DAT System description DAT and Spiral quadrifilar Helix antenna. Percentage of respondents who have heard about any of these antennas Percentage of respondents who were aware that ISRO was involved in the development of these technologies Percentage of respondents who were not aware of the application of these antennas Percentage of respondents who were not aware of the market segment of these antennas. Percentage of respondents who are interested to enter into joint collaboration with ISRO Percentage of respondents who are interested for technology transfer from ISRO No of organizations interested for technology transfer for various antennas Reason for not going for the technology transfer from ISRO. Other information sought about these antennas Percentage of respondent eager to consider ISRO if they provide other antennas at cheaper cost.
28 29 30 36 36 37 37
38 38 39 39 40 40
43
Market Survey for New Antennas and Terminals Developed By SAC
Thank you very much for your valuable time. Abhishek Trainee, ISRO
44
Market Survey for New Antennas and Terminals Developed By SAC
Sequentially Rotated Multilayer stacked patch array antenna (MSS Type D terminal) Broadband multilayer printed antenna (CAL-VAL project- Trans-Receive terminal) Spiral quadrifilar helix antenna (Distress alert transmitter) None
Please provide the source, if possible from where you have heard about these antennas
2. Are you aware of the fact that ISRO is involved in the development of these antennas? *
Yes No
Yes No
45
Market Survey for New Antennas and Terminals Developed By SAC
4. Rate the below application for these antennas on a scale of 1 to 51 being least important 5 being most important.
1 Defense
Telecommunication
Video Conferencing
Rural Telecommunication
Rescue operation
Fleet Monitoring
Emergency
5. Please select the antenna for which you would be keen to get the technical get how or technology transfer from SAC, ISRO . *
Sequentially Rotated Multilayer stacked patch array antenna (MSS Type D terminal) Broadband multilayer printed antenna (CAL-VAL project- Trans-Receive terminal) Spiral quadrifilar helix antenna (Distress alert transmitter) None 6. Please select the antenna for which you would be keen to enter into a joint collaboration with SAC, ISRO . *
Sequentially Rotated Multilayer stacked patch array antenna (MSS Type D terminal) Broadband multilayer printed antenna (CAL-VAL project- Trans-Receive terminal) Spiral quadrifilar helix antenna (Distress alert transmitter) None
7. If your response to both question no 5 and 6 is NONE please specify the reason.
46
Market Survey for New Antennas and Terminals Developed By SAC
Already have similar antenna. Doesnt fit to our product line Other: 8. According to you what are the market segment available for these three antennas?
9. Kindly mention any additional information you need or any additional feature you like to see in these antennas
10. Apart from these three antennas do you require any other type of antenna? *
Yes No
Yes No
12. If your answer to the question # 10 or question #11 is Yes, will you consider ISRO for these antennas if we will provide it at cheaper cost with better efficiency? (If yes please provide the details such as frequency ,polarization ,etc of the needed antenna or else move to question 13 )
Yes No
Frequency
47
Market Survey for New Antennas and Terminals Developed By SAC
Polarization
Gain
Size
Weight
Your designation
Contact number
Email address
48
Market Survey for New Antennas and Terminals Developed By SAC
Less than5 years 5-10 years 10-15 years Greater than 15 years
49
Market Survey for New Antennas and Terminals Developed By SAC
APPENDIX IV POSTERS
1. MSS TYPE D TERMINALS
50
Market Survey for New Antennas and Terminals Developed By SAC
51
Market Survey for New Antennas and Terminals Developed By SAC
52
Market Survey for New Antennas and Terminals Developed By SAC
53
Market Survey for New Antennas and Terminals Developed By SAC
54
Market Survey for New Antennas and Terminals Developed By SAC
55
Market Survey for New Antennas and Terminals Developed By SAC
www.comsatsystems.co.in www.srinar.com www.telimart.net www.lambdagroup.co.in www.sgrtelemart.com www.kenstel.com www.spacetelecom.in www.esselshyam.net www.microqual.com www.sesami.in www.wilcom.co.in www.synergytpl.com
56
Market Survey for New Antennas and Terminals Developed By SAC
57
Market Survey for New Antennas and Terminals Developed By SAC
Isotropic antenna: Antenna transmitting (receiving) equal radiation in (from) all directions. Isotropic antenna is a hypothetical idealized device that does not exist in reality. It is usually taken as a reference when measuring directivity of actual realizable antennas. Noise figure: Signal-to-noise ratio degradation in antenna amplifier. Amplifier noise figure should be as low as possible. Omnidirectional antenna: Antenna transmitting (receiving) equal radiation in (from) all horizontal directions. A typical example is a whip antenna. Whip antenna's radiation power is distributed equally in all directions in a plane perpendicular to the whip. UHF: Ultra High Frequency (UHF) band. TV channels 14 to 69 are transmitted in UHF band in frequency range 470-806 MHz. VHF: Very High Frequency (VHF) band. TV channels 2 to 13 are transmitted in VHF band in frequency range 54-72 MHz, 76-88 MHz, 174-216 MHz. VSWR (or SWR): Voltage Standing Wave Ratio is the ratio of the maximum to minimum voltage on the antenna feeding line. Standing wave pattern is created on the feeding line when the impedance match is not perfect and a fraction of the power put into antenna is reflected back and not radiated. For perfectly impedance matched antenna the VSWR is 1:1.
58
Market Survey for New Antennas and Terminals Developed By SAC
REFERENCES
Balanis, Constantine. "Antenna Theory: A Review", Proceedings of the IEEE, vol. 80, January 1992. W2AEE Antenna History. Arthur M. Kay (?), scanned by Alan Crosswell. http://www.w2aee.columbia.edu/history/antenna-history.html www.antenna-theory.com www.isro.gov.in http://www.ciol.com/Technology/Networking/News-Reports/Active-segment-pushes-antennamarket/148287/0/ www.abiresearch.com http://www.bccresearch.com http://voicendata.ciol.com http://www.hdtvantennalabs.com
59
Market Survey for New Antennas and Terminals Developed By SAC