Beruflich Dokumente
Kultur Dokumente
GDK-162/100/FPII
Admin Programming
1.
1.1 INTRODUCTION
The GDK Key Telephone System can be programmed to meet each customer's individual need. All programming is done at station 100 (station port # 00) using KD-36D digital key telephone. (You cannot program with Large LCD keyset.) Additional programming stations can be assigned (PGM 21-BTN 4), but only 1 keyset can be active in programming mode at any one time. Upon entering the program mode, the key telephone at station 100 cannot operate as a normal telephone but as a programming instrument with all of the buttons redefined. The keys of the dial pad are used to enter the various data fields and to enter numerical information. The 24 buttons located at the top of the phone (Flexible Buttons) are used to indicate the specific data field and to enter information. Sometimes the [SPEED] button and * of the dial pad is used to delete the data or to indicate end of data input. See TABLE 1.5.1 - 1.5.9 for default data. If this pre-programming suits the customer, additional admin program is not necessary. To change admin data, the user enters the admin. programming mode and select program code. During admin programming other keysets operate normally. When Admin programming, LCD and LEDs indicate the current programmed data and status. If the programmer enters correct data, then LCD and LEDs show the entered data and the data is stored in the temporary buffer area. Real system databases is not changed and has no effect on telephone operation unless permanent-updating procedure is executed. Pressing [HOLD/SAVE] button, all data in the temporary buffer (same as LCD and LEDs show their status) is saved into permanent memory. Tones are provided to let the programmer know data entry is correct (confirmation tone) or not (error tone).
2. Press the [TRANS/PGM] button and dial # (Confirmation tone is heard). 3. Enter Admin password if the password has been set. This places the station into the admin
programming mode (confirmation tone heard). Each program is accessed by pressing the [TRANS/PGM] button and dialing the two-digit program number. If an error is made while entering data, the [v] or the [TRANS/PGM] button can go the previous status. When the [TRANS/PGM] button is pressed, the LCD will display;
ENTER PROGRAM CODE
A-1
GDK-162/100/FPII
Admin Programming
A-2
GDK-162/100/FPII
Admin Programming
NUMBER 66 670 671 672 673 674 675 676 677 678 679 69 7XXX 162 100 FPII 162 100 FPII 801-848 801-824 801-809 8801-8896 8801-8848 8801-8834 89 8## 162 100 FPII 8#01-8#96 8#01-8#48 8#01-8#34 9 0 *0 *1 *2 *3 *4 ** #*1 #*2 #*3 #*4 *8 *9 [SPEED] + * [SPEED] + # [SPEED] + 00-19 Access the first CO line Attendant Call Retrieve Holding CO Line Tie Routing Access CO Line Access CO Group Access Group Call Pick-up
ITEM DVU Record User Greeting (after predefined time) DVU Time Announcement DVU Date Announcement DVU Station Number Announcement DVU Record User Greeting DVU Delete User Greeting DVU Play User Greeting DVU Station Statuse Announcement DVU Record Page Announcement DVU Retrieve Page Announcement (after 4 sec) Universal Night Answer (UNA) Direct Call Pick-up (XXX = Station Number)
REMARK
Keyset Keyset
Print SMDR (Station Base) Print SMDR (Account Group Base) Delete SMDR (Station Base) Delete SMDR (Account Group Base) Display Call Charge on LCD Abort SMDR Printing Door Open 1 Door Open 2 Door Open 3 Door Open 4 VM Message Wait Enable VM Message Wait Cancel Last Number Redial Save Number Redial Station Speed Dial Access
Keyset Keyset
A-3
GDK-162/100/FPII
Admin Programming
NUMBER
REMARK XXX (Bin No. of System Speed Dial) 162: 200-999 100/FPII: 200-399
[SPEED] + XXX
Table 1.4.1 Numbering Plan To enter user programming mode, press the [TRANS/PGM] button in a keyset or dial 3 (Programming enter code) in a SLT. The following numbering plan is fixed, cannot be changed by Admin. Programming. To place function under a flex. button, use [TRANS/PGM] + code.
NUMBERCODE 18 30 25 29 2* 40 41# 41 42 43 44 45 46 47 48 49 50 51 52 54 55 56 57 58 59 61 62 73 77XX 80 81 Walking COS Station User Name Registration Receive Station Number from KSU Erase Subscription Data Display Date / Time MPB Version Display Wake-up Time Registration (Continuous) Wake-up Time Registration (One-time) Wake-up Time Cancel SMEMU Serial Number Display Authorization Code Registration Authorization Code Change Station COS Change Station COS Restore Custom Message Display (Message 00) Intercom Answer Mode (1 HF / 2 TONE / 3 PV) Differential Ring LCD Display Mode (English/Korean) Set World Time [RECORD] BTN Assignment With Voice Mail Restrict DID Ring Restore DID Ring Headset/Speakerphone Mode [COLR] BTN Assignment Erase All CO Message Wait Enable/Disable DID Call Wait Enable/Disable Send Keypad Facility IE Background Music Custom Message Display (XX = 00-20) [Dial Memo] BTN Assignment [Account Code] BTN Assignment Keyset Keyset System Attendant System Attendant Keyset " " " " Digital Keyset Keyset with LCD ITEM Keyset 4/8 BTN Keyset, SLT WHTU only ATD only WHTU only Keyset REMARK
A-4
GDK-162/100/FPII
Admin Programming
ITEM [ICM Hold] BTN Assignment [Camp-on] BTN Assignment [ATD Override] BTN Assignment [UCD DND] BTN Assignment [ACNR] BTN Assignment [Stop Watch] BTN Assignment [ACD] BTN Assignment [Data Module] BTN Assignment [SPEED] BTN Assignment [CONF] BTN Assignment [CALLBK] BTN Assignment [DND/FWD] BTN Assignment [FLASH] BTN Assignment [MUTE] BTN Assignment [MON] BTN Assignment [CLIR] BTN Assignment Wake-up Time Registration (Continuous) Wake-up Time Registration (One-time) Wake-up Time Cancel Authorization Code Cancel LCD Date Mode Change LCD Time Mode Change Custom Display Message Program (11-20) CO Line Access DND/Call Forward/Pre-selected MSG Cancel Door Phone Music Selection System Date/Time Setting Station COS Change (COS 7) Station COS Restore DVU - Record System Greeting External Page Music -1 Assignment/Cancel External Page Music -2 Assignment/Cancel Start Traffic Analysis Disable Traffic Analysis Print Traffic Analysis Abort Traffic Analysis Dial By Name Automatic Day/Night Mode Program Subscribe WHTU Admin Programming Code " " " " " " "
REMARK
Digital Keyset Digital Keyset 4/8 BTN Keyset " " " " " " Keyset Attendant " " System Attendant " " " Attendant " " " " " System Attendant Attendant Attendant System Attendant " " " " Attendant ATD only
A-5
GDK-162/100/FPII
Admin Programming
A-6
GDK-162/100/FPII
Admin Programming
PGM 40 PGM 41 PGM 42 PGM 43 PGM 44 PGM 45 PGM 46 PGM 47 PGM 48 PGM 49 PGM 50 PGM 51 PGM 52 PGM 53 PGM 54 PGM 55 PGM 56 PGM 57 PGM 58 PGM 59 PGM 60 PGM 61 PGM 62 PGM 63 PGM 65 PGM 66 PGM 67 PGM 68 PGM 69 PGM 71 PGM 72 PGM 73 PGM 74 PGM 75 PGM 76 PGM 77 PGM 78 PGM 79 PGM 92 PGM #1
System Attribute - I System Attribute - II System Attribute - III System Timer - I System Timer - II Admin Password Main Attendant Assignment Station Group Station Group Attribute Executive/Secretary Pairs Alarm Attribute External Control Contact PBX Access Code SMDR Long Distance Codes Authorization Code DID Digit Conversion DID/DISA Destination Pulse Dial Speed Ratio Modem Assignment Setting System Date/Time LCD Date/Time Display Mode S/W Version Display SMDR Attribute - I SMDR Attribute - II TIE Routing Tables System Gain Control System Speed Zone Programming ACNR Tone Cadence System Tone Frequency World Time Attribute Display World Time Voice Mail Dialing Codes CO Line Name Assignment Ring Frequency (Called Station base) Ring Frequency (Calling Station base) DCO TX Gain Control Digit Insert Table CCR Table Nation Specific Attribute - I (For Australia) System Attributes - V
A-7
GDK-162/100/FPII
Admin Programming
TOLL TABLE
PGM 70 PGM 64
Exception Table Canned Toll Exception Table Database Print QSIG Basic Attribute QSIG Routing Table
A-8
GDK-162/100/FPII
Admin Programming
A-9
GDK-162/100/FPII
Admin Programming
01 22 23 24 01 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
First 24 Flexible Number Alarm Reset Group Call Pick-Up Station DVU Access Second 24 Flexible Number Night Answer Direct Call Pick-Up CO Group Access CO Line Access Tie Routing Access Retrieve Held CO Group Retrieve Held CO Line Access to CO Line in the 1st available CO Group Attendant Call Print SMDR (Station Base) Print SMDR (Account Group Base) Delete SMDR (Station Base) Delete SMDR (Account Group Base) Display Call Charge On LCD Abort SMDR Printing Door Open 1 Door Open 2 Door Open 3 Door Open 4 VM MSG Wait Enable VM MSG Wait Cancel UCD DND Station ISDN Flash *4 ** #*1 #*2 #*3 #*4 *8 *9 **4 *** #*1 #*2 #*3 #*4 *8 *9 *2 *3 **2 **3 0 *0 *1 0 **0 **1 69 7 801-848 8801-8896 89 8## 8#01-8#96 9 *69 *7 801-848 8801-8896 89 8## 8#01-8#96 9 65 66 67 *65 *66 *67
A-10
GDK-162/100/FPII
Admin Programming
A-11
GDK-162/100/FPII
Admin Programming
PGM
BTN 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
ITEM Retrieve Held CO Line Access to CO Line in the 1st available CO Group Attendant Call Print SMDR (Station Base) Print SMDR (Account Group Base) Delete SMDR (Station Base) Delete SMDR (Account Group Base) Display Call Charge On LCD Abort SMDR Printing Door Open 1 Door Open 2 Door Open 3 Door Open 4 VM MSG Wait Enable VM MSG Wait Cancel UCD DND Station ISDN Flash
NUM SET 3 8#018#48 9 0 **0 **1 **2 **3 **4 *** #*1 #*2 #*3 #*4 *8 *9 *68 *#
NUM SET 4 8#018#48 9 0 661 662 663 664 665 666 #*1 #*2 #*3 #*4 *8 *9 68 *#
NUM SET 5 4#014#48 1 0 671 672 673 674 **4 *** #*1 #*2 #*3 #*4 *8 **9 68 *#
NUM SET 7 8#018#48 9 0 **0 **1 **2 **3 **4 *** #*1 #*2 #*3 #*4 *8 *9 *68 *#
REMARK
A-12
GDK-162/100/FPII
Admin Programming
PGM
BTN 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
ITEM All Call Page (EXT/INT) Enter SMDR Account Code Flash Command to CO line Last Number Redial (LNR) Do-Not-Disturb Call Forward Speed Dial Programming MSG Wait/Call-Back Enable MSG Wait/Call-Back Answer Speed Dial Access Cancel DND/CFW / Pre-selected MSG Call Park Locations Alarm Reset Group Call Pick-Up Station DVU Access Second 24 Flexible Number Night Answer Direct Call Pick-Up CO Group Access CO Line Access Tie Routing Access Retrieve Held CO Group Retrieve Held CO Line Access to CO Line in the 1st available CO Group Attendant Call Print SMDR (Station Base) Print SMDR (Account Group Base) Delete SMDR (Station Base) Delete SMDR (Account Group Base) Display Call Charge On LCD Abort SMDR Printing Door Open 1
NUM SET 3 *49 *50 *51 *52 *53 *54 *55 *56 *57 *58 *59 *601*605 *65 *66 *67 *69 *7 801809 88018834 89 8## 8#018#34 9 0 **0 **1 **2 **3 **4 *** #*1
NUM SET 4 #00 50 51 52 53 54 55 56 57 58 59 601605 65 ** 40 77 *7 801809 88018834 89 8## 8#018#34 9 0 661 662 663 664 665 666 #*1
NUM SET 5 #6 91 51 52 53 49 *40 *66 *67 *9 59 950954 *65 *1 *22 2 *42 401409 48014834 47 4* 4#014#34 1 0 671 672 673 674 **4 *** #*1
NUM SET 7 *49 *50 *51 *52 *53 *54 *55 *56 *57 *58 *59 *601*605 *65 *66 *67 *69 *7 801809 88018834 89 8## 8#018#34 9 0 **0 **1 **2 **3 **4 *** #*1
REMARK
01 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
SLT
A-13
GDK-162/100/FPII
Admin Programming
PGM
BTN 17 18 19 20 21 22 23
ITEM Door Open 2 Door Open 3 Door Open 4 VM MSG Wait Enable VM MSG Wait Cancel UCD DND Station ISDN Flash
REMARK
*8 *9 68 *#
*8 *9 *68 *#
*8 *9 68 *#
*8 **9 68 *#
*8 *9 68 *#
*8 *9 *68 *#
A-14
GDK-162/100/FPII
Admin Programming
A-15
GDK-162/100/FPII
Admin Programming
DEFAULT 0 -
TABLE 1.6.11
PGM BTN 09
RANGE FP II YES / NO YES / NO YES / NO YES / NO YES / NO YES / NO YES / NO YES / NO YES / NO YES / NO YES / NO YES / NO YES / NO YES / NO SP / HEAD YES / NO YES / NO YES / NO YES / NO YES / NO YES / NO YES / NO YES / NO YES / NO YES / NO
REMARK
Data Line Security Group Listening Speaker-Phone/Headset Howling Tone To SLT DID Call Waiting on busy station Alarm/Door Bell Signaling ICM Box Signaling CO Line Access with dialing No Touch Answer DVU Access Voice Over Suppress RX Data connected DM Prepaid Call
A-16
GDK-162/100/FPII
Admin Programming
PGM BTN 13 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2
ITEM Station ID Assignment Keyset DSS MAP 1 DSS MAP 2 DSS MAP 3 DSS MAP 4 DLS MAP 1 DLS MAP 2 ICM Box SLT (DTMF) SLT (Pulse) SLT with Msg Wait (DTMF) SLT with Msg Wait (Pulse) Station ID Display Station COS : Day Station COS : Night CO Group Access
RANGE FP II 1-12
REMARK
N/A N/A -
1-7
1-7
1
1
1- 24 CO Line Group 01~24 CO Line Group 25~48 16 1 2 3 17 18 19 1 2 3 4 20 21 1 2 3 4 5 6 7 22 1 2 ICM Tenancy Group Assign ICM Tenancy Group Attendant ICM Tenancy Access Group Preset Call Forward Hot Line / Warm Line Flex Button CO Line CO Group Station SMDR Account Group Assign DID Ring ACD Warning Tone CO Button Program Enable ADMIN Program Enable UCD Service Differential Ring CO Call Drop Timer Enable CTI Mode CTI Baud Rate 01 - 24 01-34/48/96 01-09/24/48 STA No. 01 - 24/99 YES / NO YES / NO YES / NO YES / NO YES / NO 0-4 YES / NO 1-3 1-3 01 - 05/10 STA No. 01 - 05/10 01 - 05/20
01-09 N/A
01-24 25-48
A-17
GDK-162/100/FPII
Admin Programming
PGM BTN 23 1 2 3 4 5 6 7 8 9 10 11 24 1 2 3 4 5
ITEM ISDN Sub Address ISDN Long MSN EXT or CO ATD Progress IND CO Message Wait Station Base CLIP Station Base COLP Station Base CPN Station Base CLIR STA CLI Name Display CO Name Bin COLR HSR (Headset Ring) CO Group Access with dialing Keypad Facility
RANGE FP II YES / NO YES / NO 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 00 - 10 YES / NO ON / OFF YES/NO YES/NO
DEFAULT 100 NO NO 0 (NO) 1 (EXT) 0 (NO) 0 (NO) 0 (NO) 0 (NO) 0 (NO) 0 (NO) 1(ON) 00 NO OFF YES NO 162
REMARK
UK: ON
DEFAULT
-
REMARK
A-18
GDK-162/100/FPII
Admin Programming
A-19
GDK-162/100/FPII
Admin Programming
PGM BTN 38 1 2 3 4 5 6 7 39 1 2 3 4
ITEM CO Line Attributes -IV CO Distinct Ring CO Line MOH CO Line Dial Tone Ring Back Cause Handling Error Cause Handling Busy Cause Handling Announce Cause Handling R2 DCOB CO Line Attribute Incoming Signal Outgoing Signal B-Signal Grp II Signal
RANGE 0-4 0-4 YES/NO 1/0 (ON/OFF) 1/0 (ON/OFF) 1/0 (ON/OFF) 1/0 (ON/OFF)
Pulse(0)/DTMF(1)/REC(2) Pulse(0)/DTMF(1)/REC(2) 1-9 1-9
REMARK
For GDK-162
For GDK-162 DTMF (1) DTMF (1) CHARGE (6) Grp II-1 (1)
A-20
GDK-162/100/FPII
Admin Programming
PGM BTN 6 7 43 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 25 26 26 27 27 28 28 29 30 31 32 33
ITEM Clear ACD Database after printing ACD Print Duration Exclusive Hold Recall Timer System Hold Recall Timer Transfer Recall Timer I-Hold Recall Timer ATD Recall Timer CO Ring Detect Timer Pause Timer CO Release Guard Timer CO Warning Tone Timer CO Dial Delay Timer Call Park Timer Preset Call Forward Timer Unsupervised Conference Timer ACNR Retrial Pause Timer ACNR Retrial Delay Timer Flexible DID Time-out Timer ACNR No Answer Timer ACNR Retry Counter Warm Line Timer PBX Code Print Prepaid Timer DISA Retry Counter COS when DISA seize CO DVU Forward Answer Timer R2 Out Manage Timer ACNR Retry Time Count R2 Pulse Timer Switch Pause Timer DT Delay Timer First CO Group OVR ACNR Retry Time Count CO Call Drop Timer Switch Pause Timer First CO group OVR R2 Incoming Manage Timer R2 Disappear Timer CO Call Drop Timer Call Warning Tone
RANGE YES / NO 10SEC / 1Hour 000 - 300 000 - 300 000 - 300 000 - 300 00 - 60 1-9 31-9 010 - 150 060 - 900 00 - 99 000 - 600 00 - 99 00 - 99 030 - 300 000 - 300 000 - 300 10 - 50 1-3 01 - 20 1/0 00 - 99 1 - 13 1-6 04 - 40 01 - 50 1-9 01 - 30 00 -40 01 - 30 0/1 1-9 01 - 99 00 - 40 0/1 01 - 50 01 - 50
01 - 99
DEFAULT NO 1 Hour 060 030 030 030 01 2 3 020 180 01 120 10 10 030 030 030 30 3 05 0 15 3 6 (UK: 1) 04 14 3 7 00 20 1 3 10 00 1 (UK : 0) 14 14
10
REMARK
1 sec base 1 sec base 1 sec base 1 sec base 1 min base 100 msec base 1 sec base 100 msec base 1 sec base 1 sec base 1 sec base 1 sec base 1 min base 1 sec base 1 sec base 100 msec base 1 sec base 1 sec base 1 sec base
For GDK-162 For GDK-100/FPII For GDK-162 For GDK-100/FPII For GDK-162 For GDK-100/FPII For GDK-162 For GDK-100/FPII For GDK-162 For GDK-162 N/A in FPII/100 N/A in FPII/100 1 min base
A-21
GDK-162/100/FPII
Admin Programming
PGM BTN 44 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
ITEM Message Reminder Tone Timer Hook Switch Flash Timer Hook Switch Debounce Timer DID/DISA No Answer Timer ICM Box Timer Door Open Timer Call Forward No Answer Timer ICM Dial-Tone Timer Inter-Digit Timer Automatic Release Timer Page Timer Ring Stop Detection Timer Wink Timer Min Hook-flash Timer SMDR Start Timer DVU Recording Time CO Digit Analysis Counter ACD Print Timer SLT Ring Phase Time Camp-On Recall Timer Station Auto Release Timer CEPT CO Type
RANGE 00 - 60 01-25 01 - 25 00 - 99 00 - 60 05 - 99 000 - 600 01 - 20 01 - 20 000 - 300 00 - 60 010 - 150 010 - 200 000 - 250 000 - 250 10 - 90 0-9 000 - 255 2-5 000 - 200 000 - 200 02
DEFAULT 00 05 01 20 30 20 015 10 05 030 15 060 010 020 000 20 3 000 5 050 060 2
REMARK 1 min base 100msec base 100msec base 1 sec base 1 sec base 100msec base 1 sec base 1 sec base 1 sec base 1 sec base 1 sec base 100 msec base 10 msec base 10 msec base 1 sec base 1 sec base
23 23 24 45 46 47 1-5 1-6 1 2 3 4 5 6
Preparation Signal Timer Erase Wake Up Fail Ring Timer Erase Wake Up Fail Ring Timer ADMIN Password Main Attendant Assign Station Groups Circular Group Terminal Group UCD Group Voice Mail Group Ring Group Pick-Up Group
007 20 20 1 : 101
A-22
GDK-162/100/FPII
Admin Programming
PGM BTN 48 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
ITEM Circular Group Attribute No Answer Timer Ring Timer Wrap-Up Timer Overflow Timer Overflow Destination Announce Location Group Call By Pilot Number Terminal Group Attribute No Answer Timer Ring Timer Wrap-Up Timer Overflow Timer Overflow Destination Announce Location Group Call By Pilot Number UCD Group Attribute Queuing To DVU Announce 1 Timer Queuing To DVU Announce 2 Timer Supervisor Timer Supervisor Call Overflow Timer Wrap-Up Timer Queuing To DVU Announce Timer Overflow Destination DVU Announce Location 1 DVU Announce Location 2 DVU Announce 2 Repeating UCD Stations Priority Supervisor Alternate Destination Music Source
RANGE 00 99 000 999 002 999 000 600 STA No. /STA GRP No. DVU 1-9 1/0 00 99 000 999 002 999 000 600 STA No./ STA GRP No. DVU 1-9 1/0 000 999 000 999 000 999 00 99 000 600 002 999 000 999 STA No. / STA GRP No. DVU 1 - 9 DVU 1 - 9 1/0 09 STA No. STA No. / STA GRP No. 09
0 015 000 030 00 000 002 000 0 0 0 1 sec base 1 sec base 1 sec base 1 sec base 1 sec base 1 sec base
A-23
GDK-162/100/FPII
Admin Programming
PGM BTN 1 2 3 4 5 6 7 8 9 1 2 3 4 5 48 1 2 49 50 1 2 3 4 51 52 53 54 55 1 2 Put Mail Index Get Mail Index Ring Timer
RANGE
DEFAULT
REMARK
999 000 -
1 2
VM Group Hunt Type Ring Group Attribute Overflow Timer Overflow Destination Music Source Ring Group Annc Timer Ring Group Annc Location Pick-Up Group Attribute Auto Pick-Up All Ringing Alarm Enable Alarm Mode Alarm Contact Type Alarm Signal Mode YES / NO YES / NO STA No. YES / NO Alarm / Door-Bell Close / Open Repeat / Once 1 - 2/4/6 Max 2 digits Max 2 digits 5 digits 2-4 4 digits NO NO NO Alarm Close Repeat 1 : "0" 3 #*** 0-9 # : Ignore Digit * : using received digit 000 600 STA No./ STA GRP No. 02 0 600 1 sec base
1 - x External Contact Assign 1 - 5 PBX Dialing Codes 1 - 5 SMDR Long Distance Codes Authorization Codes DID Received Digit from PX DID First Two Digits Conversion
3 56 1 2
DID Second Digit Conversion DID/DISA Destination Busy Destination Error Destination
A-24
GDK-162/100/FPII
Admin Programming
PGM BTN 57
ITEM
RANGE
DEFAULT 2
58
1 2 3
Modem Mode Modem Baud Rate Modem Associated Device System DATE/TIME Setting
59 60 1 2 61 62 1 2 3 4 5 6
LCD Time Display Mode LCD Date Display Mode S/W Version Display Save SMDR Print SMDR SMDR Recording Call Type Print Incoming Call Record Detailed SMDR SMDR Print Baud Rate (RS-232)
12/24 Hour MMDDYY / DDMMYY YES / NO YES / NO LD / All YES / NO YES / NO 1-8
12 Hour DDMMYY
NO NO Long Distance Only NO YES 6 1: Baud 300 2: Baud 600 3: Baud1200 4: Baud 2400 5: Baud 4800 6: Baud 9600 7: Baud 19600 8: Baud 38200
7 63 65 66 67 68 69 71 1 2
3 English Chars 6 digits 0-5 CO 01-34/48/96 0 - 63 01 - 10 0 - 255 4 digits 1: Display World Time 2: Celsius/Fahrenheit 3: ISD Code length 4: ISD Code
1 - 6 TIE Routing Table (01 - 30) 1 -12 System Gain Control 1 - 3 System Speed Zone 1 - 4 ACNR Tone Cadence 1 - 4 System Tone Frequency 1 - 4 World Time Attribute
A-25
GDK-162/100/FPII
Admin Programming
ITEM
DEFAULT -
REMARK
73 74 75 76 77 78
1 - 9 VM dialing Table CO Line Name (01-10) 1 - 4 Ring Frequency 1 - 4 Distinct Ring Frequency 1 - 7 DCO TX Gain 1 - 3 Digit Insert Table
Max. 12 digits Max. 12 ENG. chars 0000 - 9999 0000 - 9999 00 - 63 1 dB base -
A-26
GDK-162/100/FPII
Admin Programming
A-27
GDK-162/100/FPII
Admin Programming
A-28